响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

Fenton氧化——混凝联合处理橡胶废水研究

以橡胶厂的实际工业废水为研究对象,探讨了H2O2投加量、混凝液pH、混凝剂投加量以及反应时间对Fenton氧化后废水混凝处理效果的影响;并对H2O2用量、FeSO4.7H2O用量和Fe2(SO4)2用量进行L(33)正交实验,确定Fenton氧化—混凝联合工艺处理橡胶废水的最佳反应条件:H2O2投加量2mL,FeSO4.7H2O投加量0.3g,Fe2(SO4t)3投加量0.3g.与Fenton氧化法和直接混凝法相比,Fenton氧化—混凝联合工艺对橡胶废水处理效果更好,对COD去除率明显高于单独采用两种方法对COD去除率的总和.     

三亚河水体中甲烷和氧化亚氮的分布、释放及影响因素研究

甲烷(CH₄)和氧化亚氮(N₂O)是大气中重要的温室气体,对全球变暖和大气化学有重要作用。受人为活动影响较大的河流、河口是大气中CH₄和N₂O的重要源。于2019年春季、2020年秋季台风前后沿三亚河从下游到上游采集了11个站位的样品,测定三亚河水体中CH₄、N₂O浓度及相关参数,并估算了水-气界面释放通量。结果表明：春季、秋季以及台风后CH₄平均浓度分别为(15.92±23.04)、(364.43±265.41)、(666.02±502.60) nmol/L,N₂O平均浓度分别为(24.37±19.88)、(8.47±5.19)、(47.48±33.47) nmol/L,台风后大于台风前。水体中CH₄、N₂O主要受溶解氧(DO)和降雨影响,下游河段主要受潮汐作用影响。现场产生和沉积物释放是水体中CH₄的主要源,硝化作用是水体中N₂     

基于神经网络模型对城市空气质量预报方法的优化研究

基于郑州市2017年1月1日—2022年2月28日环境空气细颗粒物(PM_2.5)逐日质量浓度监测数据和同期气象数据,利用反向传播(BP)神经网络构建了环境空气PM_2.5质量浓度预报模型,实现了对郑州市后1日环境空气PM_2.5质量浓度日均值进行预报。构建了考虑大气氧化性因素(情景一)和不考虑大气氧化性因素(情景二)这2种情景,并对2种情景下的预报效果进行评价。结果显示,在情景一下,各季节PM_2.5预报质量浓度与实况质量浓度的标准化平均偏差(NMB)和均方根误差(RMSE)均处于较低水平,表明预报效果均具有较好的稳定性;各季节PM_2.5实况质量浓度与预报质量浓度之间的相关系数(r)、一致性指数(IA)、准确率(Q)和级别预报准确率(G)均处于较高水平,其中Q值均>79%,G值均>80%,表明各季节PM_2.5实况质量浓度与预报质量浓度趋势的吻合程度较高。情景一各季节PM_2.5预报质量浓度与实况质量浓度的NMB和RMSE均低于情景...     

利用废铁屑和粉煤灰的电化学原理处理印染废水的方法研究

提出一种改进的铁屑法处理印染废水 ,对其机理进行探讨 ,并确定工艺条件为 p H4.0 ,处理时间 3 0 min,铁屑和粉煤灰的投加率分别为 5 %和 6%时 ,CODcr可降至 40 0 mg/L以下 ,去除率达 77%以上 ,脱色率 95 %以上 ,是一种高效可行的印染废水预处理方法     

广州市城区站点冬季PM2.5时间变化及碳氮同位素组成特征

于2018年冬季在广州城区磨碟沙站点开展细颗粒物(PM_2.5)样品采集,并获得PM_2.5中水溶性离子、含碳组分、稳定碳氮同位素的组成及时间变化特征,重点讨论了PM_2.5浓度升高时段的化学组成特征变化,进而利用稳定碳氮同位素变化特征探究了主要污染来源。结果表明：采样期间,研究站点PM_2.5平均质量浓度为22.1μg/m³,共出现两个PM_2.5浓度水平升高时段,所对应的平均质量浓度分别达46.0μg/m³和63.0μg/m³。风速降低、温度升高等不利气象条件是导致上述时段PM_2.5浓度上升的重要原因。在上述时段,伴随着PM_2.5浓度的升高,NO^-₃和NH⁺₄浓度均出现显著升高,NO^-₃与SO^2-₄的摩...     

苏州工业园区春季一次典型臭氧污染过程分析

基于臭氧(O₃)及前体物监测数据,综合运用正定矩阵因子分解模型(PMF)、O₃生成敏感性(EKMA)曲线、O₃来源解析工具(OSAT)等方法,对苏州工业园区2022年春季一次典型O₃污染过程成因开展研究。结果表明,高温及前体物的累积是导致园区O₃超标的主要成因,个别污染时段O₃及前体物受浙江、上海传输影响;污染期间园区处于典型VOCs控制区,VOCs主要来源为油气储运(35.6%)、区域背景(28.8%)、塑料制品生产(16.0%)、移动源(13.6%)、溶剂使用(6.0%)。为有效削减不利气象条件下O₃峰值浓度,应重点加强本地溶剂使用、油品挥发、有机合成等污染环节VOCs的管控。     

苏州大气颗粒物PM2.5和PM10质量浓度异常“倒挂”现象的成因及影响分析

为深入研究PM_2.5和PM₁₀质量浓度异常“倒挂”现象的成因及影响,在苏州市相城区国控点开展比对监测分析,回顾性分析了2016—2020年苏州全部国控点颗粒物浓度数据。苏州市相城区国控点PM_2.5浓度的比对分析结果表明：该国控点频繁出现PM_2.5浓度高于其他国控点PM_2.5浓度和高于该站点PM₁₀浓度(“倒挂”率高达34%)的“双高”现象,PM_2.5平均浓度比其他9个国控点高12.5%～37.2%,比位于同一站点的备用监测仪器(“倒挂”率为0)高38.1%。2016—2020年,苏州全部国控点“倒挂”时间的总体趋势都是逐年递增,且集中发生在相对湿度较高的20:00至次日07:00。这5年间各国控点PM_2.5浓度异常偏高导致的异常“倒挂”现象对全市年均浓度产生的正误差分别为1.6%、2.8%、6.0%、6.2%和4.1%,基本呈现出逐年递增的趋势。上述结果表明：苏州PM_2.5浓度偏高是由动态加...     

基于不同时间尺度综合指数贡献率的攀枝花市大气污染特征分析

选取2016—2022年攀枝花市环境空气质量监测数据，基于年度、季度、月度、小时时间尺度评价环境空气质量综合指数贡献率。结果表明，攀枝花市污染类型已由传统的单一工业型污染转变为复合型污染，且污染物在不同时间尺度下的分布特征明显。从季度尺度来看，第一季度细颗粒物(PM_2.5)综合指数贡献率较大，第二和第三季度臭氧(O₃)综合指数贡献率较大，第四季度二氧化氮(NO₂)及PM_2.5综合指数贡献率较大。从月度尺度来看，O₃在3—8月的贡献较大，PM_2.5、NO₂、可吸入颗粒物(PM₁₀)、一氧化碳(CO)、二氧化硫(SO₂)在1—2月及11—12月的贡献较大。从小时尺度来看，O₃在13—19点贡献较大，PM₁₀、PM_2.5、CO在8—13点贡献较大，SO₂在9—13点贡献较大，NO₂在8—1...     

化学发光法臭氧分析仪的研制与性能测试

基于化学发光臭氧(O₃)检测方法,将氮氧化物分析仪(Thermo Model 42i-TL)改装为O₃分析仪,测试其性能,并与紫外光度法O₃分析仪(Thermo Model 49i)同时应用于外场观测,开展比对测试试验。结果显示：该改装仪器的测量性能优于Thermo Model 49i,其零点噪声为0.10×10^-9(体积分数,下同),最低检出限为0.20×10^-9,量程噪声为0.42×10^-9,示值误差为0.1%满量程(F.S.)。在比对试验过程中,化学发光法O₃分析仪运行稳定,测量结果与商品化的Thermo Model 49i所测定的O₃浓度数值的变化趋势高度一致(R²=0.998)。化学发光法O₃分析仪相较于Thermo Model 49i具有更低的噪声,其日间(09:00—17:00)O₃浓度示值显著低于Thermo Model 49i,且...     

城市空气质量周报效用分析

介绍了世界上一些发达国家的空气污染预报的做法和采取的措施，阐述了我国开展空气质量预报的方针和方法，指出了周报是预报的基础工作。叙述了我国空气质量周报的污染参数的选取、污染指数的分级及其浓度限值和污染指数计算及确定，分析并总结了开展城市空气质量周报所发挥的效用是提高公众的环保意识，加大了治理污染的力度，转变了环境监测的职能，促进了环境监测事业的发展     

锅炉烟尘测试中锅炉负荷率的计算方法探讨

GB5468 -91规定 ,锅炉烟尘测试时 ,必须对锅炉的运行负荷进行测试 ,而实际监测过程中 ,许多锅炉房不具备测试的计量条件 ,为了解决这一问题 ,文章提出利用烟气量和空气过剩系数计算锅炉负荷率。在实际监测工作中 ,该方法方便、易于操作 ,所得结果和标准规定方法所得结果有很好的一致性     

水中总硬度测量不确定度的评定

采用EDTA滴定法测定水质总硬度的测量不确定度评定。充分考虑测量重复性、标准溶液的配制、滴定等过程对测量的影响,计算水中总硬度的测量相对合成标准不确定度为1·81×10-3。     

实验室质量管理体系内部审核的实施

在实施GB/T15481-2000 idt ISO/IEC17025:1999标准《检测和校准实验室能力的通用要求》的过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核实施阶段的关键环节,提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法,对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

Fractionation of heavy metals and assessment of contamination of the sediments of Lake Titicaca

Chemical weathering is one of the major geochemical processes that control the mobilization of heavy metals. The present study provides the first report on heavy metal fractionation in sediments (8–156 m) of Lake Titicaca (3,820 m a.s.l.), which is shared by the Republic of Peru and the Plurinational State of Bolivia. Both contents of total Cu, Fe, Ni, Co, Mn, Cd, Pb, and Zn and also the fractionation of these heavy metals associated with four different fractions have been determined following the BCR scheme. The principal component analysis suggests that Co, Ni, and Cd can be attributed to natural sources related to the mineralized geological formations. Moreover, the sources of Cu, Fe, and Mn are effluents and wastes generated from mining activities, while Pb and Zn also suggest that their common source is associated to mining activities. According to the Risk Assessment Code, there is a moderate to high risk related to Zn, Pb, Cd, Mn, Co, and Ni mobilization and/or remobilization from the bottom sediment to the water column. Furthermore, the Geoaccumulation Index and the Enrichment Factor reveal that Zn, Pb, and Cd are enriched in the sediments. The results suggest that the effluents from various traditional mining waste sites in both countries are the main source of heavy metal contamination in the sediments of Lake Titicaca.     

“湖泛”恶臭物质分析及来源浅析

介绍了中国南方"湖泛"中的恶臭物质及检测情况,采用常规分析和气相色谱-质谱(GC-MS)对"湖泛"水样进行检测,认为"湖泛"恶臭物主要是氨和硫醚类物质。根据"湖泛"发生的时间及频次,结合南方地区农业水稻秧田的农药使用情况,推断氨基甲酸酯类农药的使用可能是"湖泛"发生的诱因。     

贵州黔东南州三板溪水库春季拟多甲藻水华特征

2011年3月13日对贵州省黔东南州三板溪水库进行春季浮游植物调查的结果表明,三板溪水库Ⅱ号采样点(下革东)发生以佩纳形拟多甲藻为优势种的拟多甲藻水华,细胞密度高达1.15×10⁷cell/L;板溪水库总氮的最低值为2.09 mg/L,总磷的最低值为0.95 mg/L,三板溪水库的总氮、总磷含量较丰富,不存在总氮或总磷是限制性因子;通过SPSS16.0统计软件分别进行Pearson 积距相关系数分析表明,氮磷比是三板溪水库发生拟多甲藻水华的主要影响原因。     

Environmental Assessment of the Impact of Ozone to the Neuston of the Sea-Surface Microlayer of the Gulf of Mexico

Substantial amounts of NOx (146 000 t/y) and total hydrocarbons (294 000 t/y) are released to the marine atmosphere by the large number of oil and gas operations over Federal waters of the Gulf of Mexico (GOM). Under appropriate meteorological conditions these emissions react to form ozone (0–54 g/m3 over-water) which can affect the marine environment. Using a dry deposition model, this work examines the amount of ozone derived from oil and gas offshore operations and deposited in the sea surface of the Gulf of Mexico, and assesses its impact on the neuston of the sea-surface microlayer. Surface integrated estimates of ozone deposited from oil and gas operations over the sea surface ranges from 400 kg to 1800 kg which results in sea surface concentrations of 15 g/m3. This estimate and the actual toxic ozone levels suggest no acute, toxic impacts to the neuston. However, indirect effects may occur through changes to the pelagic foodwebs and organic carbon pathways. Another potential pathway for ozone impacting the environment is through the production of bromate. Based on the concentrations and time scales (11–139 days) only sublethal effects appear to occur, but uncertainties associated with this assessment need to be further studied. From an ecological perspective, the environmental impacts and risks of NOx and VOC discharges from offshore platforms need to be assessed for neuston and other components of the marine ecosystem.     

Evaluation of method of preparation of passive diffusion tubes for measurement of ambient nitrogen dioxide

This study was carried out in response to suggestions that the measurement of NO(2) by Palmes-type passive diffusion tubes (PDT) is affected by the method of preparation of the triethanolamine (TEA) absorbent coating on the grids. The following combinations of factors were investigated: TEA solvent (acetone or water), volume composition of TEA in solvent (50% or 20%), and grid coating method (dipping in solution prior to assembly or pipetting solution on after assembly). Duplicate PDTs prepared by each of the 8 methods were exposed in parallel, in urban air, for a total of 80 separate 1 week exposures. NO(2) concentrations derived from PDTs prepared by pipetting methods were significantly less precise than concentrations from dipping methods, with mean RSDs for duplicate measurements of 13.8% and 8.5%, respectively (n= 316 each category). Pipetting methods using solutions of 50% TEA composition were particularly imprecise (mean RSD 17.2%). Data from PDTs prepared by pipetting methods were systematically more poorly correlated with each other and with data from co-located chemiluminescence analysers, than corresponding data from PDTs prepared by dipping methods, indicating that more consistent accuracy was also obtained by the latter PDTs. The statistical evidence suggested that PDTs prepared by pipetting 50% TEA in water generally gave lower NO(2) concentrations. Although this is in agreement with a previous study, it is also possible that such an observation here may be a statistical artefact given the demonstrably poorer precision of this method. The general tendency of PDTs to show positive bias in NO(2) measurement in urban air in 1 week exposures was again evident in this study (mean biases at roadside and urban centre locations of +35% (n= 475) and +18% (n= 112), respectively) consistent with augmentation of within-tube NO(2) flux by chemical reaction between co-diffusing NO and O(3). Overall, it is recommended that the pipetting method of PDT grid preparation is avoided, or at least investigated further, because of the apparent degradation in precision and accuracy of NO(2) measurement. Potential reasons for the effect are discussed.     

实验室质量管理体系内部审核的策划

在实施GBT15481-2000(idtISOIEC17025:1999)标准《检测和校准实验室能力的通用要求》的过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核策划阶段的关键环节,提出审核范围确定、审核计划和抽样方案制订的技术方法,为有序高效地实施内部审核提供了行动指南。