基于非线性参数的电液伺服系统滑模控制

针对在电液伺服系统跟踪控制中存在非线性不确定参数和外界扰动的问题,提出了一种基于积分微分器的滑模Lyapunov函数的控制方法。首先,在只有位移信号测量输出的情况下,采用高阶积分链式微分器对其速度和加速度信息进行预估。系统存在非线性不确定参数,利用微分器对状态和不确定项的实时估计,设计出积分滑模控制器,实现自适应规律以及对电液伺服系统中不确定扰动的抑制。搭建电液伺服系统AMESim模型并与Matlab构成联合仿真平台,对控制器进行仿真。仿真表明,该控制器具有良好的对非线性不确定参数变化的补偿能力和跟踪性能。     

Adaptive output feedback tracking control of robot manipulators using position measurements only

In this paper, a new adaptive neuro controller for trajectory tracking is developed for robot manipulators without velocity measurements, taking into account the actuator constraints. The controller is based on structural knowledge of the dynamics of the robot and measurements of joint positions only. The system uncertainty, which may include payload variation, unknown nonlinearities and torque disturbances is estimated by a Chebyshev neural network (CNN). The adaptive controller represents an amalgamation of a filtering technique to generate pseudo filtered tracking error signals (for the elimination of velocity measurements) and the theory of function approximation using CNN. The proposed controller ensures the local asymptotic stability and the convergence of the position error to zero. The proposed controller is robust not only to structured uncertainty such as payload variation but also to unstructured one such as disturbances. Moreover the computational complexity of the proposed controller is reduced as compared to the multilayered neural network controller. The validity of the control scheme is shown by simulation results of a two-link robot manipulator. Simulation results are also provided to compare the proposed controller with a controller where velocity is estimated by finite difference methods using position measurements only.     

Nonlinear adaptive control of robotic manipulators - hyperstability approach

A nonlinear model reference adaptive controller based on hyperstability approach, is presented for the control of robot manipulators. Use of hyperstability approach simplifies the stability proof of the adaptive system. The unknown parameters of the system, as well as its variable payload, are estimated on line and are adaptive to their actual values; tending to reduce the system error. In addition, any sudden change in the system parameters or payload is detected by the proposed intelligent controller. Robot path tracking, with unknown parameter values and variable payload, is simulated to show the effectiveness of the proposed adaptive control algorithm. Both system output error and parameter estimation error vanish under the proposed parameter adaptation algorithm.     

Dynamic modeling and nonlinear tracking control of a novel modified quadrotor

In this article, a nonlinear tracking controller is designed based on Lyapunov stability for a novel aerial robot. The proposed 6‐rotor configuration improves stability and payload lifting capacity of the robot compared with conventional quadrotors while avoiding further complexities in the robot dynamics and steering principles. The dynamical model of the robot is derived using Newton‐Euler method. The model represents a nonlinear, coupled, and underactuated system. The proposed control strategy includes 2 main parts: an attitude controller and a position controller. Both the attitude and position controls are Lyapunov‐based nonlinear tracking controllers that guarantee the asymptotic convergence of the states' tracking errors to zero. Simulation results are presented to illustrate appropriate performance of the closed‐loop system in terms of position/attitude tracking even in the presence of wind disturbance.     

欠驱动三维桥式吊车系统自适应跟踪控制器设计

针对三维桥式吊车系统的欠驱动特性, 设计了一种目标轨迹自适应跟踪控制器. 相比其他常规的三维桥式吊车控制器, 它不需要对吊车模型进行任何近似解耦或线性化处理, 并且考虑了系统所受的摩擦力与空气阻力等干扰. 在负载质量和吊绳绳长等发生变化或存在不确定因素的情况下, 它依然能实现对台车的精确定位与负载摆动的有效抑制. 对于闭环系统的稳定性, 文中通过Lyapunov方法和芭芭拉定理对其进行了理论分析, 随后的实验结果也表明了这种自适应跟踪控制器良好的控制性能和对不确定性因素的适应性.     

A pure neural network controller for double‐pendulum crane anti‐sway control: Based on Lyapunov stability theory

Crane systems have been widely applied in logistics due to their efficiency of transportation. The parameters of a crane system may vary from each transport, therefore the anti‐sway controller should be designed to be insensitive to the variation of system parameters. In this paper, we focus on pure neural network adaptive tracking controller design issue that does not require the parameters of crane systems, i.e. the trolley mass, the payload mass, the cable lengths, and etc. The proposed neural network controller only requires the output feedback signals of the trolley, i.e. the position and the velocity, which means no sway measuring equipment is needed. The Lyapunov method is utilized to design the weights update law of neural network, and the robustness of the proposed controller is proved by the Lyapunov stability theory. The results of numerical simulations show that the proposed neural network controller has excellent performance of trolley position tracking and payload anti‐sway controlling.     

Adaptive Output Feedback Control of Flexible-Joint Robots Using Neural Networks: Dynamic Surface Design Approach

In this paper, we propose a new robust output feedback control approach for flexible-joint electrically driven (FJED) robots via the observer dynamic surface design technique. The proposed method only requires position measurements of the FJED robots. To estimate the link and actuator velocity information of the FJED robots with model uncertainties, we develop an adaptive observer using self-recurrent wavelet neural networks (SRWNNs). The SRWNNs are used to approximate model uncertainties in both robot (link) dynamics and actuator dynamics, and all their weights are trained online. Based on the designed observer, the link position tracking controller using the estimated states is induced from the dynamic surface design procedure. Therefore, the proposed controller can be designed more simply than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop adaptive system are uniformly ultimately bounded. Finally, the simulation results on a three-link FJED robot are presented to validate the good position tracking performance and robustness of the proposed control system against payload uncertainties and external disturbances.     

A Robust Controller for A 3‐DOF Flexible Robot with a Time Variant Payload

This article describes a new control scheme designed for a three degree of freedom (3‐DOF) flexible robot. The control scheme consists of two multi variable control loops. The inner loop is the motor's position control system, while the outer loop controls the robot tip's position, thus canceling vibrations which are originated by the structural flexibility of the manipulator during movement. As it will be shown, the outer control loop is robust to payload variations. The outer loop performance is based on a perfect cancelation of the inner loop dynamics. The effects of not achieving such perfect cancelation are also studied, and rules for designing a robust controller in this case are developed. Simulations assuming different payloads have been carried out with successful results for trajectory tracking. Trajectory tracking with a variable payload is also achieved.     

Real-time implementation of a robust adaptive controller for arobotic manipulator based on digital signal processors

Presents an approach to the design and real-time implementation of an adaptive controller for a robotic manipulator based on digital signal processors. The Texas Instruments DSP (TMS320C31) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for robotic manipulators. In the proposed scheme, adaptation laws are derived from the direct model reference adaptive control principle based on the improved Lyapunov second method. The proposed adaptive controller consists of an adaptive feedforward and feedback controller and PI-type time-varying auxiliary control elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for an industrial robot with four joints in the joint space and Cartesian space     

Adaptive neural prescribed performance control for a class of strict-feedback stochastic nonlinear systems under arbitrary switchings

This paper presents an adaptive neural tracking control scheme for strict-feedback stochastic nonlinear systems with guaranteed transient and steady-state performance under arbitrary switchings. First, by utilising the prescribed performance control, the prescribed tracking control performance can be ensured, while the requirement for the initial error is removed. Second, radial basis function neural networks approximation are used to handle unknown nonlinear functions and stochastic disturbances. At last, by using the common Lyapunov function method and the backstepping technique, a common adaptive neural controller is constructed. The designed controller overcomes the problem of the over-parameterisation, and further alleviates the computational burden. Under the proposed common adaptive controller, all the signals in the closed-loop system are 4-Moment (or 2 Moment) semi-globally uniformly ultimately bounded, and the prescribed tracking control performance are guaranteed under arbitrary switchings. Three examples are presented to further illustrate the effectiveness of the proposed approach.     

Neural controller for adaptive movements with unforeseen payloads

A theory and computer simulation of a neural controller that learns to move and position a link carrying an unforeseen payload accurately are presented. The neural controller learns adaptive dynamic control from its own experience. It does not use information about link mass, link length, or direction of gravity, and it uses only indirect uncalibrated information about payload and actuator limits. Its average positioning accuracy across a large range of payloads after learning is 3% of the positioning range. This neural controller can be used as a basis for coordinating any number of sensory inputs with limbs of any number of joints. The feedforward nature of control allows parallel implementation in real time across multiple joints.     

Analytical modelling and nonlinear strain feedback control of a flexible robot ARM

In this paper, a full nonlinear analytical model of a single link flexible manipulator consisting of a rotary joint and a flexible link, handling uniform payload at the tip considering its inertia is developed based on extended Hamilton-assumed mode method. Due to model nonlinearities, a nonlinear control strategy directly based on the strain gauges measurements attached in some locations of the link is investigated. Effectiveness of the controller in vibration suppressing and fast motion duration tracking capability is shown through simulation. The text was submitted in English by the authors.     

Distributed adaptive output feedback tracking control for a class of uncertain nonlinear multi-agent systems

This paper addresses the distributed output feedback tracking control problem for multi-agent systems with higher order nonlinear non-strict-feedback dynamics and directed communication graphs. The existing works usually design a distributed consensus controller using all the states of each agent, which are often immeasurable, especially in nonlinear systems. In this paper, based only on the relative output between itself and its neighbours, a distributed adaptive consensus control law is proposed for each agent using the backstepping technique and approximation technique of Fourier series (FS) to solve the output feedback tracking control problem of multi-agent systems. The FS structure is taken not only for tracking the unknown nonlinear dynamics but also the unknown derivatives of virtual controllers in the controller design procedure, which can therefore prevent virtual controllers from containing uncertain terms. The projection algorithm is applied to ensure that the estimated parameters remain in some known bounded sets. Lyapunov stability analysis shows that the proposed control law can guarantee that the output of each agent synchronises to the leader with bounded residual errors and that all the signals in the closed-loop system are uniformly ultimately bounded. Simulation results have verified the performance and feasibility of the proposed distributed adaptive control strategy.     

Robust Adaptive Control of Robots Using Neural Network: Global Stability

A desired compensation adaptive law‐based neural network (DCAL‐NN) controller is proposed for the robust position control of rigid‐link robots. The NN is used to approximate a highly nonlinear function. The controller can guarantee the global asymptotic stability of tracking errors and boundedness of NN weights. In addition, the NN weights here are tuned on‐line, with no offline learning phase required. When compared with standard adaptive robot controllers, we do not require linearity in the parameters, or lengthy and tedious preliminary analysis to determine a regression matrix. The controller can be regarded as a universal reusable controller because the same controller can be applied to any type of rigid robots without any modifications. A comparative simulation study with different robust and adaptive controllers is included.     

Adaptive control of a 3-DOF parallel manipulator considering payload handling and relevant parameter models

Model-based control improves robot performance provided that the dynamics parameters are estimated accurately. However, some of the model parameters change with time, e.g. friction parameters and unknown payload. Particularly, off-line identification approaches omit the payload estimation (due to practical reasons). Adaptive control copes with some of these structural uncertainties. Thus, this work implements an adaptive control scheme for a 3-DOF parallel manipulator. The controller relies on a novel relevant-parameter dynamic model that permits to study the cases in where the uncertainties affect: (1) rigid body parameters, (2) friction parameters, (3) actuator dynamics, and (4) a combination of the former cases. The simulations and experiments verify the performance of the proposed controller. The control scheme is implemented on the modular programming environment Open Robot Control Software (OROCOS). Finally, an experimental setup evaluates the controller performance when the robot handles a payload.     

Robust adaptive control of a robotic manipulator including motor dynamics

An adaptive nonlinear control law that incorporates the manipulator dynamics as well as dynamics of the actuator is developed in this article. The proposed adaptive robust tracking controller requires position measurements only. The controller consists of two parts: a linear observer that generates an estimated error from the error on the joint position, together with a linear feedback controller that utilizes the estimated states. The second part is an adaptive controller that utilizes the feedback states from the linear observer to generate a control effort that takes into consideration the dynamic parameters variation of the robot and actuator. The closed loop system is locally stable in the Lyapunov sense. © 1998 John Wiley & Sons, Inc.     

电液伺服系统的多滑模鲁棒自适应控制

针对一类参数与外负载非匹配不确定的非线性高阶系统,提出了一种基于逐步递推方法的多滑模鲁棒自适应控制策略.应用逐步递推的多滑模控制方法简化了高阶系统的控制问题,同时在自适应控制中加入鲁棒控制的方法,以消除不确定性对控制性能的影响.首先利用逐步递推方法与状态反馈精确线性化理论,得出确定系统的多滑模控制器设计方法;然后基于Lyapunov稳定性分析方法,给出不确定系统的参数自适应律,及鲁棒自适应控制器的设计方法.本文把该控制策略应用到电液伺服系统的位置跟踪控制中,仿真结果显示,该控制方法具有较强的鲁棒性及良好的跟踪效果.     

TRACKING CONTROL IN THE PRESENCE OF NONLINEAR DYNAMIC FRICTIONAL EFFECTS: ROBOT EXTENSION

In this paper, we extend the observer/control strategies previously published in [25] to an n-link, serially connected, direct drive, rigid link, revolute robot operating in the presence of nonlinear friction effects modeled by the Lu-Gre model. In addition, we also present a new adaptive control technique for compensating for the nonlinear parameterizable Stribeck effects. Specifically, an adaptive observer/controller scheme is developed which contains a feedforward approximation of the Stribeck effects. This feedforward approximation is used in a composite controller/observer strategy which forces the average square integral of the position tracking error to an arbitrarily small value. Experimental results are included to illustrate the performance of the proposed controllers.     

一类非线性激励器系统的鲁棒自适应跟踪

考虑一类具有非线性激励器不确定系统的鲁棒跟踪问题，其不确定性是部分已知的。所构造的鲁棒自适应控制方案能确保系统的跟踪误差终极一致有界．与已有文献结果相比．未知参数估计的自适应律和控制器是连续的，从而使得所提出的设计方案在实际控制问题中易实现。且与具有线性激励器的系统一样具有较强的鲁棒性．最后通过数值算例进一步说明了该设计方案是有效的。     

Output feedback tracking control of robot manipulators with model uncertainty via adaptive fuzzy logic

Many robot controllers require not only joint position measurements but also joint velocity measurements; however, most robotic systems are only equipped with joint position measurement devices. In this paper, a new output feedback tracking control approach is developed for the robot manipulators with model uncertainty. The approach suggested herein does not require velocity measurements and employs the adaptive fuzzy logic. The adaptive fuzzy logic allows us to approximate uncertain and nonlinear robot dynamics. Only one fuzzy system is used to implement the observer-controller structure of the output feedback robot system. It is shown in a rigorous manner that all the signals in a closed loop composed of a robot, an observer, and a controller are uniformly ultimately bounded. Finally, computer simulation results on three-link robot manipulators are presented to show the results which indicate good position tracking performance and robustness against payload uncertainty and external disturbances.