共查询到20条相似文献,搜索用时 93 毫秒
1.
The role of ceria, niobium and molybdenum oxides on the promotion of the NO reduction by CO was studied. A bifunctional mechanism was discussed as a function of both the nature of interaction between metal oxide and palladium and the redox properties of each metal oxide. The NO dissociation was better on the Pd/MoO3/Al2O3 catalyst than on the Pd/CeO2/Al2O3 and Pd/Nb2O5/Al2O3 catalysts. The explanation for the very high N2 production on Pd–Mo catalyst during the TPD analysis may be attributed to the NO+Meδ+ stoichiometric reaction. The promoting effect of a reducible oxide for the NO+CO reaction at low temperature can be ascribed mainly to its easiness for a redox interchange and its interaction with the noble metal particles. This would increase the surface redox ability and favor the dynamic equilibrium needed for high N2 selectivity. 相似文献
2.
A combined spectroscopic and catalytic study of the NO reactivity on microporous aluminophosphates, with chabasite-related structure, CoAPO-34, CuAPO-34 and CuAPSO-34, is reported. NO and CO adsorption were monitored by FTIR spectroscopy, and revealed that Co 2+/Co 3+ and Cu +/Cu 2+ redox couples, the sites responsible for the catalytic activity, are present in these catalysts. CoAPO-34 catalysts showed exceptionally high performances in the oxidation of NO to NO 2, and poor activity in other DeNO x reactions. Copper-based aluminophosphates and silico-aluminophosphates, besides good performances in the NO oxidation to NO 2, showed good activity in the N 2O decomposition even in the presence of oxygen or water in the feed. The presence of silicon has beneficial effects both on the thermal and hydrothermal stability of the zeolitic structure, as well as on the catalytic performances of the metal-aluminophosphates. 相似文献
3.
Catalytic methane combustion and CO oxidation were investigated over AFeO 3 (A=La, Nd, Sm) and LaFe 1−xMg xO 3 ( x=0.1, 0.2, 0.3, 0.4, 0.5) perovskites prepared by citrate method and calcined at 1073 K. The catalysts were characterized by X-ray diffraction (XRD). Redox properties and the content of Fe 4+ were derived from temperature programmed reduction (TPR). Specific surface areas (SA) of perovskites were in 2.3–9.7 m 2 g −1 range. XRD analysis showed that LaFeO 3, NdFeO 3, SmFeO 3 and LaFe 1−xMg xO 3 ( x·0.3) are single phase perovskite-type oxides. Traces of La 2O 3, in addition to the perovskite phase, were detected in the LaFe 1−xMg xO 3 catalysts with x=0.4 and 0.5. TPR gave evidence of the presence in AFeO 3 of a very small fraction of Fe 4+ which reduces to Fe 3+. The fraction of Fe 4+ in the LaFe 1−xMg xO 3 samples increased with increasing magnesium content up to x=0.2, then it remained nearly constant. Catalytic activity tests showed that all samples gave methane and CO complete conversion with 100% selectivity to CO 2 below 973 and 773 K, respectively. For the AFeO 3 materials the order of activity towards methane combustion is La>Nd>Sm, whereas the activity, per unit SA, of the LaFe 1−xMg xO 3 catalysts decreases with the amount of Mg at least for the catalysts showing a single perovskite phase ( x=0.3). Concerning the CO oxidation, the order of activity for the AFeO 3 materials is Nd>La>Sm, while the activity (per unit SA) of the LaFe 1−xMg xO 3 catalysts decreases at high magnesium content. 相似文献
4.
Ceria (CeO 2) and rare-earth modified ceria (CeReO x with Re = La 3+, Pr 3+/4+, Sm 3+, Y 3+) supports and Pt impregnated supports are studied for the soot oxidation under a loose contact with the catalyst with the feed gas, containing NO + O 2. The catalysts are characterised by XRD, H 2-TPR, DRIFT and Raman spectroscopy. Among the single component oxides, CeO 2 is significantly more active compared with the other lanthanide oxides used in this study. Doping CeO 2 with Pr 3+/4+ and La 3+ improved, however, the soot oxidation activity of the resulting solid solutions. This improvement is correlated with the surface area in the case of CeLaO x and to the surface area and redox properties of CePrO x catalyst. The NO conversion to NO 2 over these catalysts is responsible for the soot oxidation activity. If the activity per unit surface area is compared CePrO x is the most active one. This indicates that though La 3+ can stabilise the surface area of the catalyst in fact it decreases the soot oxidation activity of Ce 4+. The lattice oxygen participates in NO conversion to NO 2 and the rate of this lattice oxygen transfer is much faster on CePrO x. In general, the improvement of the soot oxidation is observed over the Pt impregnated CeO 2 and CeReO x catalysts, and can be correlated to the presence of Pt°. The surface reduction of the supports in the presence of Pt occurred below 100 °C. The surface redox properties of the support in the Pt catalysts do not have a significant role in the NO to NO 2 conversion. In spite of the lower surface area, the Pt/CeYO x and Pt/CeO 2 catalysts are found to be more active due to larger Pt crystal sizes. The presence of Pt also improved the CO conversion to CO 2 over these catalysts. The activation energy for the soot oxidation with NO + O 2 is found to be around 50 kJ/mol. 相似文献
5.
Nanoparticles of Ce xZr 1−xO 2 ( x = 0.75, 0.62) were prepared by the oxidation-coprecipitation method using H 2O 2 as an oxidant, and characterized by N 2 adsorption, XRD and H 2-TPR. Ce xZr 1−xO 2 prepared had single fluorite cubic structure, good thermal stability and reduction property. With the increasing of Ce/Zr ratio, the surface area of Ce xZr 1−xO 2 increased, but thermal stability of Ce xZr 1−xO 2 decreased. The surface area of Ce 0.62Zr 0.38O 2 was 41.2 m 2/g after calcination in air at 900 °C for 6 h. TPR results showed the formation of solid solution promoted the reduction of CeO 2, and the reduction properties of Ce xZr 1−xO 2 were enhanced by the cycle of TPR-reoxidation. The Pd-only three-way catalysts (TWC) were prepared by the impregnation method, in which Ce 0.75Zr 0.25O 2 was used as the active washcoat and Pd loading was 0.7 g/L. In the test of Air/Fuel, the conversion of C 3H 8 was close to 100% and NO was completely converted at λ < 1.025. The high conversion of C 3H 8 was induced by the steam reform and dissociation adsorption reaction of C 3H 8. Pd-only catalyst using Ce 0.75Zr 0.25O 2 as active washcoat showed high light off activity, the reaction temperatures ( T50) of 50% conversion of CO, C 3H 8 and NO were 180, 200 and 205 °C, respectively. However, the conversions of C 3H 8 and NO showed oscillation with continuously increasing the reaction temperature. The presence of La 2O 3 in washcoat decreased the light off activity and suppressed the oscillation of C 3H 8 and NO conversion. After being aged at 900 °C for 4 h, the operation windows of catalysts shifted slightly to rich burn. The presence of La 2O 3 in active washcoat can enhance the thermal stability of catalyst significantly. 相似文献
6.
In the off-gases of internal combustion engines running with oxygen excess, non-thermal plasmas (NTPs) have an oxidative potential, which results in an effective conversion of NO to NO 2. In combination with appropriate catalysts and ammonia (NH 3-SCR) or hydrocarbons (HC-SCR) as a reducing agent, this can be utilized to reduce nitric oxides (NO and NO 2) synergistically to molecular nitrogen. The combination of SCR and cold plasma enhanced the overall reaction rate and allowed an effective removal of NOX at low temperatures. Using NH3 as a reducing agent, NOX was converted to N2 on zeolites or NH3-SCR catalysts like V2O5–WO3/TiO2 at temperatures as low as 100–200 °C. Significant synergetic effects of plasma and catalyst treatment were observed both for NH3 stored by ion exchange on the zeolite and for continuous NH3 supply. Certain modifications of Al2O3 and ZrO2 have been found to be effective as catalysts in the plasma-assisted HC-SCR in oxygen excess. With an energy supply of about 30 eV/NO-molecule, 500 ppm NO was reduced by more than half at a temperature of 300 °C and a space velocity of 20 000 h−1 at the catalyst. The synergistic combinations of NTP and both NH3- and HC-SCR have been verified under real diesel engine exhaust conditions. 相似文献
7.
Mixed oxides of the general formula La 0.5Sr xCe yFeO z were prepared by using the nitrate method and characterized by XRD and Mössbauer techniques. The crystal phases detected were perovskites LaFeO 3 and SrFeO 3−x and oxides -Fe 2O 3 and CeO 2 depending on x and y values. The low surface area ceramic materials have been tested for the NO+CO and NO+CH 4+O 2 (“lean-NO x”) reactions in the temperature range 250–550°C. A noticeable enhancement in NO conversion was achieved by the substitution of La 3+ cation at A-site with divalent Sr +2 and tetravalent Ce +4 cations. Comparison of the activity of the present and other perovskite-type materials has pointed out that the ability of the La 0.5Sr xCe yFeO z materials to reduce NO by CO or by CH 4 under “lean-NO x” conditions is very satisfying. In particular, for the NO+CO reaction estimation of turnover frequencies (TOFs, s −1) at 300°C (based on NO chemisorption) revealed values comparable to Rh/-Al 2O 3 catalyst. This is an important result considering the current tendency for replacing the very active but expensive Rh and Pt metals. It was found that there is a direct correlation between the percentage of crystal phases containing iron in La 0.5Sr xCe yFeO z solids and their catalytic activity. O 2 TPD (temperature-programmed desorption) and NO TPD studies confirmed that the catalytic activity for both tested reactions is related to the defect positions in the lattice of the catalysts (e.g., oxygen vacancies, cationic defects). Additionally, a remarkable oscillatory behavior during O 2 TPD studies was observed for the La 0.5Sr 0.2Ce 0.3FeO z and La 0.5Sr 0.5FeO z solids. 相似文献
8.
The objective of this work was to study the promotional effect of Pt on Co-zeolite (viz. mordenite, ferrierite, ZSM-5 and Y-zeolite) and Co/Al 2O 3 on the selective catalytic reduction (SCR) of NO x with CH 4 under dry and wet reaction stream. After being reduced in H 2 at 350°C, the PtCo bimetallic zeolites showed higher NO to N 2 conversion and selectivity than the monometallic samples, as well as a combination of the latter samples such as mechanical mixtures or two-stage catalysts. After the same pretreatment, under wet reaction stream, the bimetallic samples were also more active. Among the other catalysts studied with 5% of water in the feed, (NO = CH 4 = 1000 ppm, O 2 = 2%), the NO conversion dropped to zero over Co 2.0Mor at 500°C and GHSV = 30,000 h −1, whereas it is 20% in Pt 0.5Co 2.0Mor. In Pt/Co/Al 2O 3 the NO x conversion dropped below 5% with only 2% of water under the same reaction conditions. The specific activity given as molecules of NO converted per total metal atom per second were 16.5 × 10 −4 s −1 for Pt 0.5Co 2.0Fer, 13 × 10 −4 s −1 for Pt 0.5Co 2.0Mor, 4.33 × 10 −4 s −1 for Pt 0.5Co 2.0ZSM-5 and 0.5 × 10 −4 s −1 for Pt/Co/Al 2O 3. The Y-zeolite-based samples were inactive in both mono and bimetallic samples. The species initially present in the solid were Pt° and Co°, together with Co 2+ and Pt 2+ at exchange positions. Co° seems not to participate as an active site in the SCR of NO x. Those species remained after the reaction but some reorganization occurred. A synergetic effect among the different species that enhances both the NO to NO 2 reaction, the activation of CH 4 and also the ability of the catalyst to adsorb NO, could be responsible for the high activity and selectivity of the bimetallic zeolites. 相似文献
9.
Reaction activities of several developed catalysts for NO oxidation and NO x (NO + NO 2) reduction have been determined in a fixed bed differential reactor. Among all the catalysts tested, Co 3O 4 based catalysts are the most active ones for both NO oxidation and NO x reduction reactions even at high space velocity (SV) and low temperature in the fast selective catalytic reduction (SCR) process. Over Co 3O 4 catalyst, the effects of calcination temperatures, SO 2 concentration, optimum SV for 50% conversion of NO to NO 2 were determined. Also, Co 3O 4 based catalysts (Co 3O 4-WO 3) exhibit significantly higher conversion than all the developed DeNO x catalysts (supported/unsupported) having maximum conversion of NO x even at lower temperature and higher SV since the mixed oxide Co-W nanocomposite is formed. In case of the fast SCR, N 2O formation over Co 3O 4-WO 3 catalyst is far less than that over the other catalysts but the standard SCR produces high concentration of N 2O over all the catalysts. The effect of SO 2 concentration on NO x reduction is found to be almost negligible may be due to the presence of WO 3 that resists SO 2 oxidation. 相似文献
10.
Co/ZSM-5 catalysts were prepared by several methods, including wet ion exchange (WIE), its combination with impregnation (IMP), solid state ion exchange (SSI) and sublimation (SUB). FTIR results show that the zeolite protons in H-ZSM-5 are completely removed when CoCl 2 vapor is deposited. TPR shows peaks for Co 2+ ions at 695–705°C and for Co 3O 4 at 385–390°C, but a peak in the 220–250°C region appears to indicate Co 2+ oxo-ions. The catalysts have been tested for the selective reduction of NOx with iso-C4H10 under O2-rich conditions and in the absence of O2, both with dry and wet feeds. A bifunctional mechanism appears to operate at low temperature: oxo-ions or Co3O4 clusters first oxidize NO to NO2, which is chemisorbed as NOy (y≥2) and reduced. In this modus operandi catalyst SUB shows the highest N2 yield 90% near 390°C for dry and wet feeds. It is found to be quite stable in a 52 h run with a wet feed. In contrast, the WIE catalyst, which mainly contains isolated Co2+ ions and has poor activity below 400°C, excels at T>430°C. This and the observation that, at high temperature, NO is reduced in O2-free feeds over Co/MFI catalysts, suggest that NO can be reduced over Co2+ ions without intermediate formation of NO2. The bifunctional mechanism at low temperature is supported by the fact that a strongly enhanced performance is obtained by mixing WIE with Fe/FER, a catalyst known to promote NO2 formation. 相似文献
11.
Fe/ZSM-5 catalysts with high Fe loading (Fe/Al1) have been prepared by sublimation of FeCl 3 onto H-ZSM-5 samples of different Si/Al ratios. They catalyze NO x reduction with hydrocarbons in an excess of O 2 and H 2O. TPR shows that the Fe in the zeolite cavities is different from Fe 2O 3 particles. Naked Fe 3+ ions are absent; oxo-ions, which are equally well reducible by CO and H 2, prevail. A minority of the Fe complexes lose oxygen upon mere heating to 500°C; some of the reduced sites are reoxidized only by N 2O. The population of oxo-complexes that lose oxygen by heating depends on the Si/Al ratio, this dependence is in qualitative agreement with the model of (2+) charged binuclear ions [HO–Fe–O–Fe–OH] 2+. Upon reacting with NO, the bridging O atom is transferred and NO 2 is formed. This step is not rate limiting for active catalysts with high Al/Si ratio and high Fe loading, but it becomes critical with zeolites of low Al/Si ratio. 相似文献
12.
Conversion of NO x with reducing agents H 2, CO and CH 4, with and without O 2, H 2O, and CO 2 were studied with catalysts based on MOR zeolite loaded with palladium and cerium. The catalysts reached high NO x to N 2 conversion with H 2 and CO (>90% conversion and N 2 selectivity) range under lean conditions. The formation of N 2O is absent in the presence of both H 2 and CO together with oxygen in the feed, which will be the case in lean engine exhaust. PdMOR shows synergic co-operation between H 2 and CO at 450–500 K. The positive effect of cerium is significant in the case of H 2 and CH 4 reducing agent but is less obvious with H 2/CO mixture and under lean conditions. Cerium lowers the reducibility of Pd species in the zeolite micropores. The catalysts showed excellent stability at temperatures up to 673 K in a feed with 2500 ppm CH 4, 500 ppm NO, 5% O 2, 10% H 2O (0–1% H 2), N 2 balance but deactivation is noticed at higher temperatures. Combining results of the present study with those of previous studies it shows that the PdMOR-based catalysts are good catalysts for NO x reduction with H 2, CO, hydrocarbons, alcohols and aldehydes under lean conditions at temperatures up to 673 K. 相似文献
13.
Supported Au catalysts Au-Au +-Cl x/Fe(OH) y ( x < 4, y ≤ 3) and Au-Cl x/Fe 2O 3 prepared with co-precipitation without any washing to remove Cl − and without calcining or calcined at 400 °C were studied. It was found that the presence of Cl − had little impact on the activity over the unwashed and uncalcined catalysts; however, the activity for CO oxidation would be greatly reduced only after Au-Au +-Cl x/Fe(OH) y was further calcined at elevated temperatures, such as 400 °C. XPS investigation showed that Au in catalyst without calcining was composed of Au and Au +, while after calcined at 400 °C it reduced to Au 0 completely. It also showed that catalysts precipitated at 70 °C could form more Au + species than that precipitated at room temperatures. Results of XRD and TEM characterizations indicated that without calcining not only the Au nano-particles but also the supports were highly dispersed, while calcined at 400 °C, the Au nano-particles aggregated and the supports changed to lump sinter. Results of UV–vis observation showed that the Fe(NO 3) 3 and HAuCl 4 hydrolyzed partially to form Fe(OH) 3 and [AuCl x(OH) 4−x] − ( x = 1–3), respectively, at 70 °C, and such pre-partially hydrolyzed iron and gold species and the possible interaction between them during the hydrolysis may be favorable for the formation of more active precursor and to avoid the formation of Au–Cl bonds. Results of computer simulation showed that the reaction molecular of CO or O 2 were more easily adsorbed on Au + and Au 0, but was very difficultly absorbed on Au −. It also indicated that when Cl − was adsorbed on Au 0, the Au atom would mostly take a negative electric charge, which would restrain the adsorption of the reaction molecular severely and restrain the subsequent reactions while when Cl − was adsorbed on Au + there only a little of the Au atom take negative electric charge, which resulting a little impact on the activity. 相似文献
14.
Perovskite type catalysts La 0.7Sr 0.3Cr 1−xRu xO 3 (0.025 ≤ x ≤ 0.100) were synthesized by annealing a mixture of metal oxides and carbonates gradually up to 1000 °C in air, and characterized by XRPD, XPS, TPD, SEM-EDS and the van der Pauw method. The CO oxidation activity was investigated in a differential recycle reactor. According to the XRPD results, all samples achieved a perovskite structure, with a small presence of SrCrO 4 phase. The XPS results revealed that the surface composition of all samples differed considerably from the stoichiometric value with an important segregation of strontium and mainly ruthenium with regard to chromium at the surface of the catalysts. The sharp decrease of resistivity with increasing surface concentration of ruthenium and the independence of the resistivity on temperature for the sample with x = 0.100 imply the possible presence of SrRuO 3, La–Ru–O and highly dispersed RuO 2 (invisible by XRPD), known as good electric conductors, at the surface. The CO oxidation activity increases with increasing the degree of substitution ( x). The surface concentrations of ruthenium are almost the same in the samples with x = 0.075 and 0.100. Those samples showed the similar values of resistivity in whole investigated temperature range and very close CO oxidation activity, which indicates that the concentration of Ru 4+ in the surface region and its stability are determining factors for the CO oxidation activity. The main results of this study are that ruthenium perovskites have a high thermal stability and CO oxidation activity. 相似文献
15.
Cu-ZSM-5 and Cu-AlTS-1 catalysts were prepared by solid state ion exchange and studied in DeNO x reactions. A NO 3 type surface complex was found to be an active intermediate in the decomposition of NO and N 2O. Copper was oxidized to Cu 2+ in the decomposition reactions. Oscillations at full N 2O conversion were observed in the gas phase O 2 concentration, without any change in the N 2 concentration. The oscillation was synchronized by gas phase NO formed from the NO 3 complex. The same complex seems to be an active intermediate also in NO selective catalytic reduction (SCR) by methane, whereas carbonaceous deposits play a role in NO SCR by propane. TPD reveals that only 10–20% of the total copper in the zeolites participates in the catalytic cycles. 相似文献
16.
Performance of NO x traps after high-temperature treatments in different redox environments was studied. Two types of treatments were considered: aging and pretreatment. Lean and rich agings were examined for a model NO x trap, Pt–Ba/Al 2O 3. These were done at 950 °C for 3 h, in air and in 1% H 2/N 2, respectively. Lean aging had a severe impact on NO x trap performance, including HC and CO oxidation, and NH 3 and N 2O formation. Rich aging had minimal impact on performance, compared to fresh/degreened performance. Deactivation from lean aging was essentially irreversible due to Pt sintering, but Pt remained dispersed with the rich aging. Pretreatments were examined for a commercially feasible fully formulated NO x trap and two model NO x traps, Pt–Ba/Al 2O 3 and Pt–Ba–Ce/Al 2O 3. Pretreatments were done at 600 °C for 10 min, and used feed gas that simulated diesel exhaust under several conditions. Lean pretreatment severely suppressed NO x, HC, CO, NH 3 and N 2O activities for the ceria-containing NO x traps, but had no impact on Pt–Ba/Al 2O 3. Subsequently, a relatively mild rich pretreatment reversed this deactivation, which appears to be due to a form of Pt–ceria interaction, an effect that is well known from early work on three-way catalysts. Practical applications of results of this work are discussed with respect to NO x traps for light-duty diesel vehicles. 相似文献
17.
Nanometer perovskite-type oxides La 1−xSr xMO 3−δ (M = Co, Mn; x = 0, 0.4) have been prepared using the citric acid complexing-hydrothermal-coupled method and characterized by means of techniques, such as X-ray diffraction (XRD), BET, high-resolution scanning electron microscopy (HRSEM), X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption (TPD), and temperature-programmed reduction (TPR). The catalytic performance of these nanoperovskites in the combustion of ethylacetate (EA) has also been evaluated. The XRD results indicate that all the samples possessed single-phase rhombohedral crystal structures. The surface areas of these nanomaterials ranged from 20 to 33 m 2 g −1, the achievement of such high surface areas are due to the uniform morphology with the typical particle size of 40–80 nm (as can be clearly seen in their HRSEM images) that were derived with the citric acid complexing-hydrothermally coupled strategy. The XPS results demonstrate the presence of Mn 4+ and Mn 3+ in La 1−xSr xMnO 3−δ and Co 3+ and Co 2+ in La 1−xSr xCoO 3−δ, Sr substitution induced the rises in Mn 4+ and Co 3+ concentrations; adsorbed oxygen species (O −, O 2−, or O 22−) were detected on the catalyst surfaces. The O 2-TPD profiles indicate that Sr doping increased desorption of the adsorbed oxygen and lattice oxygen species at low temperatures. The H 2-TPR results reveal that the nanoperovskite catalysts could be reduced at much lower temperatures (<240 °C) after Sr doping. It is observed that under the conditions of EA concentration = 1000 ppm, EA/oxygen molar ratio = 1/400, and space velocity = 20,000 h −1, the catalytic activity (as reflected by the temperature ( T100%) for EA complete conversion) increased in the order of LaCoO 2.91 ( T100% = 230 °C) ≈ LaMnO 3.12 ( T100% = 235 °C) < La 0.6Sr 0.4MnO 3.02 ( T100% = 190 °C) < La 0.6Sr 0.4CoO 2.78 ( T100% = 175 °C); furthermore, there were no formation of partially oxidized by-products over these catalysts. Based on the above results, we conclude that the excellent catalytic performance is associated with the high surface areas, good redox properties (derived from higher Mn 4+/Mn 3+ and Co 3+/Co 2+ ratios), and rich lattice defects of the nanostructured La 1−xSr xMO 3−δ materials. 相似文献
18.
The adsorption of CO and its reaction with NO in the 400–600 °C temperature range on Ce n+/Na +/γ-Al 2O 3 and Pd n+/Ce n+/Na +/γ-Al 2O 3 type materials used commercially as FCC additives were monitored by FTIR spectroscopy. Exposure of both types of samples to CO leads to the formation of carboxylates and carbonates. The concentration of these species was higher in samples containing Pd, indicating that palladium catalyzes their formation. The Pd n+ cations initially present in these samples undergo partial reduction to form metallic Pd in the presence of CO even at room temperature. More complete reduction of Pd, along with some aggregation, was observed after exposure to CO at elevated temperatures. Exposure of both types of samples to NO/CO mixtures in the 400–600 °C temperature range leads to the formation of surface isocyanate species. Both Na + and Ce n+ promote the formation of such NCO species. However, surface isocyanate species were formed with substantially higher rates in the presence of palladium. The formation of the isocyanate species strongly correlates with changes observed in the νOH region, indicating that hydroxyls actively participate in the surface chemistry involved and are capable of protonating the NCO species. The isocyanates are also reactive towards O 2 and NO yielding CO 2 and N 2. These results suggest that isocyanates are possibly involved as intermediates in the CO–NO reaction over the materials examined. 相似文献
19.
Both NO decomposition and NO reduction by CH 4 over 4%Sr/La 2O 3 in the absence and presence of O 2 were examined between 773 and 973 K, and N 2O decomposition was also studied. The presence of CH 4 greatly increased the conversion of NO to N 2 and this activity was further enhanced by co-fed O 2. For example, at 773 K and 15 Torr NO the specific activities of NO decomposition, reduction by CH 4 in the absence of O 2, and reduction with 1% O 2 in the feed were 8.3·10 −4, 4.6·10 −3, and 1.3·10 −2 μmol N 2/s m 2, respectively. This oxygen-enhanced activity for NO reduction is attributed to the formation of methyl (and/or methylene) species on the oxide surface. NO decomposition on this catalyst occurred with an activation energy of 28 kcal/mol and the reaction order at 923 K with respect to NO was 1.1. The rate of N 2 formation by decomposition was inhibited by O 2 in the feed even though the reaction order in NO remained the same. The rate of NO reduction by CH 4 continuously increased with temperature to 973 K with no bend-over in either the absence or the presence of O 2 with equal activation energies of 26 kcal/mol. The addition of O 2 increased the reaction order in CH 4 at 923 K from 0.19 to 0.87, while it decreased the reaction order in NO from 0.73 to 0.55. The reaction order in O 2 was 0.26 up to 0.5% O 2 during which time the CH 4 concentration was not decreased significantly. N 2O decomposition occurs rapidly on this catalyst with a specific activity of 1.6·10 −4 μmol N 2/s m 2 at 623 K and 1220 ppm N 2O and an activation energy of 24 kcal/mol. The addition of CH 4 inhibits this decomposition reaction. Finally, the use of either CO or H 2 as the reductant (no O 2) produced specific activities at 773 K that were almost 5 times greater than that with CH 4 and gave activation energies of 21–26 kcal/mol, thus demonstrating the potential of using CO/H 2 to reduce NO to N 2 over these REO catalysts. 相似文献
20.
Pt-Rh/Ce xZr 1−xO 2-Al 2O 3 with 0.6 and 1.0 wt.% noble metal loadings were prepared and characterized for their metal dispersion with respect to Ce xZr 1−xO 2-free Pt-Rh/Al 2O 3 in fresh, thermally aged and oxychlorinated states. Thermal ageing at 973 K led to loss of metal dispersion in all cases but to negligible effect on the dispersion of the Ce xZr 1−xO 2 component where present. Oxychlorination was able to fully recover metal dispersion in all cases but led to different effects on the redox properties of Ce xZr 1−xO 2 which appeared to be related to the metal loadings. Despite showing improved dispersion following regeneration, higher loaded catalyst showed no improvement in light-off performance for either NO reduction or CO oxidation and showed poorer oxygen storage (OSC) ability, particularly at higher temperatures. Lower loaded catalyst showed improved dispersion, improved OSC and reduced light-off temperatures for NO reduction and CO oxidation after oxychlorination compared to that in the thermally aged state. 相似文献
|