Study on Glow Discharge Plasma Used in Polyester Surface Modification

To achieve an atmospheric pressure glow discharge(APGD)in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were studied.We found that the region with a strong electric field,which was formed in a tiny gap between two electrodes constituting a line-line contact electrode structure,provided the initial electron for the entire discharge process.Thus,the discharge voltage was reduced.The dielectric barrier of the line-line contact electrodes can inhibit the generation of secondary electrons.Thus,the transient current pulse discharge was reduced significantly,and an APGD in air was achieved.We designed double layer line-line contact electrodes,which can generate the APGD on the surface of a material under treatment directly.A noticeable change in the surface morphology of polyester fiber was visualized with the aid of a scanning electron microscope(SEM).Two electrode structures–the multi-row line-line and double-helix line-line contact electrodes–were designed.A large area of the APGD plasma with flat and curved surfaces can be formed in air using these contact electrodes.This can improve the efficiency of surface treatment and is significant for the application of the APGD plasma in industries.     

Impact of the Insulator on the Electric Field and Generation Characteristics of Vacuum Arc Metal Plasmas

The field electron emission plays a vital role in the process of vacuum discharge breakdown. The electric field strength at the cathode tip is significant to the generation char- acteristics of vacuum arc metal plasmas. To increase the field strength at the cathode tip, a coaxial electrode plasma source was employed with an insulator settled between the electrodes. The math expression of the field strength is derived based on the Gauss theory. The impact of the insulator on the electric field and parameters of plasmas were investigated by MAXWELL 3D simulation software and the Langmuir probe. In addition, a composite insulator was adopted to further strengthen the field strength. A series of experiments were performed to focus on the role of the composite insulator in detail. The experimental and simulation results indicate that, a reasonable layout of the insulator, especially the composite insulator, can effectively increase the field strength at the cathode tip and the plasma density.     

PIC/MCC Simulation of Glow Discharge Plasma in Four-Anode Device

Numerical simulations by the code of Object-Oriented PIC （Particle-in-Cell） and the Monte Carlo Collision （MCC） method were carried out in order to obtain an insight into the characteristics of plasmas generated by glow discharges in low pressure helium in a four-anode DC glow discharge device. The results show that, the pressure, the external mirror magnetic field, and the virtual breadth of the annular electrode affect the radial distribution of the plasma density and temperature. The simulations are instructive for further experiments.     

Influence of the Transverse Field Component on the Edge Effect in a Short-Gap Discharge

In a general plane-parallel electrode system the edge of the electrode will undermine the uniformity of the dielectric barrier discharge （DBD） because of the influence of the distorted electrical field. In this paper, the influence of the non-uniform electrical field on the edge effect of DBDs in a short-gap is investigated. We present some o.f the experimental results of DBDs produced by three kinds of convex-spherical electrodes. The results show that there is a dark area （the homogeneous discharge） in the central region of the electrode and a bright halo （the filamentary discharge） in the outer peripheral region, and the radius of the dark region is determined by the electrode geometry. The calculated results of the transverse （radial） field component distribution on the surface of the electrodes show that the edge effect does not come from the electrode edge, but the transverse field. The discharge has enough space to be fully developed and then format the filamentary discharge in the outer peripheral region because the streamer of the filamentary discharge is driven to move along the direction of the longer path by the transverse field. Thus, the homogeneous discharge （the Townsend DBD or a glow DBD） could not be produced in this area.     

Removal of NO and SO2 in Corona Discharge Plasma Reactor with Water Film

In this paper, a novel type of a corona discharge plasma reactor was designed, which consists of needle-plate-combined electrodes, in which a series of needle electrodes are placed in a glass container filled with flue gas, and a plate electrode is immersed in the water. Based on this model, the removal of NO and SO2 was tested experimentally. In addition, the effect of streamer polarity on the reduction of SO2 and NO was investigated in detail. The experimental results show that the corona wind formed between the high-voltage needle electrode and the water by corona discharge enhances the cleaning efficiency of the flue gas because of the presence of water, and the cleaning efficiency will increase with the increase of applied dc voltage within a definite range. The removal efficiency of SO2 up to 98%, and about 85% of NO~ removal under suitable conditions is obtained in our experiments.     

Transition from Spark Discharge to Constricted Glow Discharge in Atmospheric Air by Capacitor Coupled Discharge

The transition from a spark discharge to a constricted glow discharge in atmospheric air was studied with a capacitor coupled pin-to-water plasma reactor. The reason of the transition is considered to be of various factors, namely the change of the air gap due to the polarization of water molecules by the electric field, the feedback effect of the capacitors, and the ion trapping mechanism. The effects of the frequency of the power supply, inter-electrode gap, and coupled capacitance on the discharge transition were also investigated.     

Boundary Effect of Planar Glow Dielectric Barrier Discharge and Its Influence on the Discharge Structure

The dielectric barrier discharge(DBD) in the glow regime in neon has been investigated by experiment and two-dimensional(2D) fluid modeling.The discharge was carried out in a planar DBD system with segmented-electrodes driven by square-wave voltage.The results show that the glow DBD originates in the center of the electrode and expands outward to the electrode edge during each half cycle of the voltage,forming a radial structure.The discharge decays firstly in the inner area but sustains longer in the edge area,showing a reversed discharge area.The discharge cannot completely cover the entire electrode surface,but remains a border of non- or weak discharge.The fluid modeling shows a similar result in agreement with the experiments.The simulations indicate that the electric field in the edge area is distorted due to the boundary effect so that the electric field and charge distribution are different from that in the inner part.The distorted field reduces the longitudinal component near the edge and causes the local field to be lower than that in the center,and hence makes the discharge behindhand.It also induces a transverse field that makes the discharge extend radially outward to the edge.The boundary effect plays an important role in the glow DBD structure.     

Characteristics and applications of diffuse discharge of water electrode in air

Plasma water treatment technology, which aims to produce strong oxidizing reactive particles that act on the gas–liquid interface by way of discharging, is used to treat the organic pollutants that do not degrade easily in water. This paper presents a diffuse-discharge plasma water treatment method, which is realized by constructing a conical air gap through an uneven medium layer. The proposed method uses water as one electrode, and a dielectric barrier discharge electrode is constructed by using an uneven dielectric. The electric field distribution in the discharge space will be uneven, wherein the long gap electric field will have a smaller intensity,while the short one will have a larger intensity. A diffuse glow discharge is formed in the cavity.With this type of plasma water treatment equipment, a methyl orange solution with a concentration of 10 mg l~(-1) was treated, and the removal rate was found to reach 88.96%.     

The Effect of High-Pressure Arc Discharge Plasma on the Degradation of Chlorpyrifos

A study is conducted to determine the effect of a kind of high-pressure arc discharge plasma on the degradation rate and kinetic equations of chlorpyrifos in different solvents with the treated times and concentrations as variables. The degradation rate was sorted in different solvents as water, methanol, acetone and then acetoacetate. The tendencies of the degradation rates with treated time in water and methanol were optimally fitted with first-order kinetics equations while those in acetone and acetoacetate were fitted with zeroth-order kinetics equations. The difference was attributed to the stronger polarity of water and methanol. The weak correlation of the degradation rates with time was mainly because the high-temperature of the arc discharge tube and the chemically-active species generated by the discharge. The degradation half-life was extended with increase of chlorpyrifos concentration. A degradation half-life less than 3 min was achieved for chlorpyrifos in water and methanol when the initial concentration was less than 300 μg/ml.     

Characterization of a Microhollow Cathode Discharge Plasma in Helium or Air with Water Vapor

Microhollow cathode discharge (MHCD) plasmas were generated in gas mixtures containing water vapor at pressures of up to 100 kPa of He or 20 kPa of air. The cathode diameter was 1.0 mm with a length of 2.0 mm. The electrical characteristics showed an abnormal glow mode. Spectroscopic measurements were carried out to examine the plasma and radicals. An analysis of the spectral profile of Hα at 656.3 nm enabled a derivation of the electron densities, namely 2×10 14 cm 3 (at 10 kPa) and 6×10 14 cm 3 (at 4 kPa) for the helium and air atmospheres, respectively, in the negative glow region. By comparing the observed OH radical spectra with those calculated by the simulation code LIFBASE, the gas temperature was deduced to be 900 K for 4 kPa of He at a discharge current of 50 mA.     

Diagnosis of Electronic Excitation Temperature in Surface Dielectric Barrier Discharge Plasmas at Atmospheric Pressure

The electronic excitation temperature of a surface dielectric barrier discharge （DBD） at atmospheric pressure has been experimentally investigated by optical emission spectroscopic measurements combined with numerical simulation. Experiments have been carried out to deter- mine the spatial distribution of electric field by using FEM software and the electronic excitation temperature in discharge by calculating ratio of two relative intensities of atomic spectral lines. In this work, we choose seven Ar atomic emission lines at 415.86 nm [（3s^23p^5）5p →（3s^23p^5）4s] and 706.7 nm, 714.7 nm, 738.4 nm, 751.5 nm, 794.8 nm and 800.6 nm [（3s^23p^5）4p → （3s^23p^5）4s] to estimate the excitation temperature under a Boltzmann approximation. The average electron energy is evaluated in each discharge by using line ratio of 337.1 nm （N2（C^3Пu →B3Пg）） to 391.4 nm （N2^＋（B2 ∑u^＋→ ∑g^＋））. Furthermore, variations of the electronic excitation tempera- ture are presented versus dielectric thickness and dielectric materials. The discharge is stable and uniform along the axial direction, and the electronic excitation temperature at the edge of the copper electrode is the largest. The corresponding average electron energy is in the range of 1.6- 5.1 eV and the electric field is in 1.7-3.2 MV/m, when the distance from copper electrode varies from 0 cm to 6 cm. Moreover, the electronic excitation temperature with a higher permittivity leads to a higher dissipated electrical power.     

Catalytic Decomposition of Toluene Using Various Dielectric Barrier Discharge Reactors

Decomposition of toluene was experimentally investigated with various dielectric barrier discharge （DBD） reactors, such as wire-cylinder, wire-plate and plate-to-plate, combined with multi-metal oxides catalyst （Mn-Ni-Co-Cu-Ox/Al2O3） loaded on the cordierite honeycomb and nickel foam, respectively. The effects of some factors including the residence time, reactor configuration and catalyst, upon the toluene destruction were studied. Results revealed that the use of in-plasma catalysis was more helpful to enhancing the DRE （destruction and removal efficiency） and reducing the O3 formation than that of either post-plasma catalysis or plasma alone. It was demonstrated that the wire-plate reactor was favorable for the oxidation reaction of toluene and the nickel foam-supported catalysts exhibited good activity.     

Surface Modification of Polyethylene （PE） Films Using Dielectric Barrier Discharge Plasma at Atmospheric Pressure

Modification of the surface properties of polyethylene （PE） films is studied using air dielectric barrier discharge at atmospheric pressure. The treated samples are examined by Water contact angle measurements, Fourier transform infrared attenuated total reflection spectroscopy （FTIR-ATR）, X-ray photoelectron spectroscopy （XPS） and scanning electron microscopy （SEM）. With the increase in treating time, the water contact angle changes from 93.2° before treatment to a minimum of 53.3° after a treatment for 50 s. Both ATR and XPS results show some oxidized species are introduced into the sample surface by the plasma treatment and the tendency of the water contact angle with the treating time is the same as that of oxygen concentration on the treated sample surface. SEM result shows the surface roughness of PE samples increases with the treatment time increasing.     

Growth of Fluorocarbon Films by Low-Pressure Dielectric Barrier Discharge

Plasma polymerized fluorocarbon （FC） films have been deposited on silicon substrates from dielectric barrier discharge （DBD） plasma of C4Fs at room temperature under a pressure of 25～125 Pa. The effects of the discharge pressure and frequency of power supply on the films have been systematically investigated. FC films with a less cross linked structure may be formed at a relatively high pressure. Increase in the frequency of power supply leads to a significant increase in the deposition rate. Static contact angle measurements show that deposited FC films have a stable, hydrophobic surface property. All deposited films show smooth surfaces with an atomic surface roughness. The relationship between plasma parameters and the properties of the deposited FC films are discussed.     

Improving Hydrophobicity of Glass Surface Using Dielectric Barrier Discharge Treatment in Atmospheric Air

Non-thermal plasmas under atmospheric pressure are of great interest in industrial applications, especially in material surface treatment. In this paper, the treatment of a glass surface for improving hydrophobicity using the non-thermal plasma generated by dielectric barrier discharge （DBD） at atmospheric pressure in ambient air is conducted, and the surface properties of the glass before and after the DBD treatment are studied by using contact angle measurement, surface resistance measurement and wet flashover voltage tests. The effects of the applied voltage and time duration of DBD on the surface modification are studied, and the optimal conditions for the treatment are obtained. It is found that a layer of hydrophobic coating is formed on the glass surface after spraying a thin layer of silicone oil and undergoing the DBD treatment, and the improvement of hydrophobicity depends on DBD voltage and treating time. It seems that there exists an optimum treating time for a certain applied voltage of DBD during the surface treatment, The test results of thermal aging and chemical aging show that the hydrophobic layer has quite stable characteristics. The interaction mechanism between the DBD plasma and the glass surface is discussed. It is concluded that CHa and large molecule radicals can react with the radicals in the glass surface to replace OH, and the hydrophobicity of the glass surface is improved accordingly.     

Grafting Silane onto Silicate Glass Surface Treated by DBD in Air

Dielectric barrier discharge plasma in air was used to modify glass surface to induce the graft of silane onto the treated surface to increase the possibility of biomolecule immobilization. The plasma treated glass had been characterized by scanning electron microscopy （SEM）, Fourier transform infrared attenuated total reflection spectroscopy, X-ray photoelectron spectroscopy （XPS） and surface water contact angle measurement. The validity of grafting silane onto glass surface was approved by the analysis of water contact angle measurement, SEM and XPS. The grafted silane content was measured by visible absorption spectroscopy using acid Orange-7. It is shown that the grafting density of silane for glass samples increases significantly after plasma treatment.     

Dielectric Barrier Discharge Plasma-Induced Photocatalysis and Ozonation for the Treatment of Wastewater

The physicochemical processes of dielectric barrier discharge （DBD） such as insitu formation of chemically active species and emission of ultraviolet （UV）/visible light were utilized for the treatment of a simulated wastewater formed with Acid Red 4 as the model organic contaminant. The chemically active species （mostly ozone） produced in the DBD reactor were well distributed in the wastewater using a porous gas diffuser, thereby increasing the gas-liquid contact area. For the purpose of making the best use of the light emission, a titanium oxide-based photocatalyst was incorporated in the wastewater treating system. The experimental parameters chosen were the voltage applied to the DBD reactor, the initial pH of the wastewater, and the concentration of hydrogen peroxide added to the wastewater. The results have clearly shown that the present system capable of degrading organic contaminants in two ways （photocatalysis and ozonation） may be a promising wastewater treatment technology.     

Surface Modification of Fluororubber Using Atmospheric Pressure Dielectric Barrier Discharge （DBD）

Fluoride rubber F2311 film, an alternating copolymer of CF2-CFC1 （CTFE） and CH2-CF2 （VF2） components, was treated by atmospheric pressure dielectric barrier discharge （DBD） in air. The surface structure, topography and surface chemistry of the treated F2311 films were characterized by contact angle measurement, atomic force microscopy （AFM）, and X-ray photoelectron spectroscopy （XPS）, respectively. The experimental results showed that a short time air plasma treatment led to morphological, wettability and chemical changes in the F2311 films. The surface hydrophilicity increased greatly after the plasma treatment, the static water contact angle decreased from 98.6° to 32°, and oxygen containing groups （C=O, O-C=O, etc. ） were introduced. Atomic force microscopy revealed that plasma produced by DBD etched F2311 films obviously. The roughness of the samples increased remarkably with the formation of peaks and valleys on the treated surfaces. The increased surface wettability may be correlated with both the introduction of hydrophilic groups due to air plasma oxidation of the surface and the change in surface morphology etched by DBD.     

Preparation of Copper Nanoparticles Using Dielectric Barrier Discharge at Atmospheric Pressure and its Mechanism简

Dielectric barrier discharge （DBD） cold plasma at atmospheric pressure was used for preparation of copper nanoparticles by reduction of copper oxide （CuO）. Power X-ray diffraction （XRD） was used to characterize the structure of the copper oxide samples treated by DBD plasma. Influences of H2 content and the treating time on the reduction of copper oxide by DBD plasma were investigated. The results show that the reduction ratio of copper oxide was increased initially and then decreased with increasing H2 content, and the highest reduction ratio was achieved at 20% H2 content. Moreover, the copper oxide samples were gradually reduced by DBD plasma into copper nanoparticles with the increase in treating time. However, the average reduction rate was decreased as a result of the diffusion of the active hydrogen species. Optical emission spectra （OES） were observed during the reduction of the copper oxide samples by DBD plasma, and the reduction mechanism was explored accordingly. Instead of high-energy electrons, atomic hydrogen （H） radicals, and the heating effect, excited-state hydrogen molecules are suspected to be one kind of important reducing agents. Atmospheric-pressure DBD cold plasma is proved to be an efficient method for preparing copper nanoparticles.     

Experimental Investigation of Flow Separation Control Using Dielectric Barrier Discharge Plasma Actuators

Influence of plasma actuators as a flow separation control device was investigated experimentally. Hump model was used to demonstrate the effect of plasma actuators on external flow separation, while for internal flow separation a set of compressor cascade was adopted. In order to investigate the modification of the flow structure by the plasma actuator, the flow field was examined non-intrusively by particle image velocimetry measurements in the hump model experiment and by a hot film probe in the compressor cascade experiment. The results showed that the plasma actuator could be effective in controlling the flow separation both over the hump and in the compressor cascade when the incoming velocity was low. As the incoming velocity increased, the plasma actuator was less effective. It is urgent to enhance the intensity of the plasma actuator for its better application. Methods to increase the intensity of plasma actuator were also studied.