首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 375 毫秒
1.
本文利用代数学中P-基分解的方法,研究了4值广义Bent函数的代数结构问题,给出了一元4值逻辑函数为广义Bent函数的一个充要条件,同时利用多值逻辑函数的循环谱分解式,给出了4值广义Bent函数的一种递归构造方法。  相似文献   

2.
基于矩阵特征分解的频率及功率谱估计方法中的MUSIC(Multiple Signal C1assification)方法有很高的分辨率,但它的缺陷在于抗噪声性能还有待提高,而且由于是对有限个观测数据进行处理,导致了误差的存在。在大量反复实验的基础上,结合几种常用窗函数的特点,提出了一种改进方法,这种方法先对数据进行加窗,进一步提高了MUSIC方法频率分辨率和抗噪声性能,同时提高了频率估计的准确性。  相似文献   

3.
复变函数分解定理的改进   总被引:1,自引:0,他引:1  
放宽了复变函数分解定理的条件,给出了纯复分析的证法。  相似文献   

4.
文中给出了剩余类环Zm上一类逻辑函数的Chrestenson循环谱分解式,并给出了Zm上广义Bent函数一种新的构造方法。此分解式还可用于构造k(k≥2)维广义Bent函数。  相似文献   

5.
反映线性相关的协方差阵的奇异值分解法在本质上是一种线性方法,其可靠性受到质疑.用能反映非线性结构的高阶统计量函数代替相关函数构造矩阵,以实现对奇异值分解法的改进,并分析了用高阶统计量构造矩阵的多种方法,得到了两种较好的方法.仿真结果验证了改进后方法的有效性及稳定性.  相似文献   

6.
结合经验模式分解方法和广义维数的特点,提出了基于经验模式分解和广义维数的机械故障诊断方法。先对信号进行经验模式分解,得到内禀模态函数,然后求每个内禀函数的广义维数,从中提取盒维数、信息维数和关联维数,组成广义维数矩阵。通过分析待检测信号和各样本信号的广义维数矩阵相关系数,判断故障状态。实验结果表明,该方法可以准确地识别机械故障状态,是一种有效的机械故障诊断手段。  相似文献   

7.
一组特征矩阵的联合对角化   总被引:1,自引:1,他引:0  
发展了一组特征矩阵联合对角化的新算法,这个算法利用了左右特征矢量之间的双正交性,定义了用于追踪单个分量的代价函数,找到了快速求解代价函数最优解的迭代算法。通过系统化的多阶段分解和多阶段重构,可以得到全部特征矢量。  相似文献   

8.
怎样利用单位阶梯函数把分段函数合写成一个式子,是学习拉普拉氏变换的一个难点,本文提供了一种形象直观方法──图象分解合成法.  相似文献   

9.
本文利用代数学中P_ 基分解的方法,研究了4值广义BENT函数的代数结构问题,给出了一元4值逻辑函数的一个充要条件,同时利用多值逻辑函数的循环谱分解 式,给出了4值广义bent函数的一种递归构造方法。  相似文献   

10.
提出了一种新的特征基函数法——自适应修正特征基函数法(AMCBFM),并将其与基于dual-MGS的QR分解技术结合,构造一种新的混合方法——QR-AMCBFM。该方法基于对目标体分块,并按一定的距离关系划分为近、远场两部分,用AMCBFM计算出每一块上的初阶电流。在计算高阶电流时,先对块间互阻抗矩阵进行QR分解以决定远场区的互阻抗可否舍弃;然后计算出高阶基函数以及电流系数。数值结果表明,QR-AMCBFM技术具有相当高的计算效率。  相似文献   

11.
利用布尔函数代数正规形的性质提出一种代数正规形快速变换和计算方法,该方法具有最小的存储空间和很高的计算效率.以此为基础,提出两种计算布尔函数零化子的有效算法:第1种算法可以求出所有n元布尔函数的代数免疫阶数和最低次零化子的代数正规形表达式;第2种算法能够求出任意一个n元平衡布尔函数代数免疫阶数和所有不超过d次的零化子.同已有基于求解线性同余方程组的零化子求解算法相比,该方法可操作性强,能够更加有效地用于评估布尔函数抵抗代数攻击的强度.  相似文献   

12.
在明确鄂尔多斯盆地姬塬地区西部长8致密储层基本特点的基础上,利用高温高压储层流体-岩石相互作用模拟仪,模拟了长8储层岩石与有机酸溶蚀反应的过程。依据地质条件,采用0.15 mol.L-1乙酸溶液(pH=2.65)作为反应溶液,模拟温度选溶蚀窗口对应深度的实际古地温(87 ℃~ 103 ℃),模拟压力范围为24.70 ~ 30.18 MPa。通过反应前后样品储层特征的变化及溶蚀率对比,分析了长8致密储层的溶蚀特征及影响因素,探讨了其溶蚀过程及溶蚀增孔过程。结果表明:在乙酸的作用下,致密储层长石(钠长石、钾长石)和方解石矿物发生明显的溶蚀反应,并产生沉淀物;根据矿物相对溶蚀率发现,碳酸盐矿物的溶解速率整体上大于长石矿物,其中方解石大于白云石,斜长石大于钾长石;随着温度和压力的增加,方解石溶蚀率先增加后不变,而长石溶蚀率基本呈线性增加,但是方解石刚开始溶蚀率高于长石;致密储层溶蚀过程主要分为3个阶段,分别为方解石胶结物溶蚀过程、长石溶蚀过程和溶蚀后沉淀物充填过程。溶蚀作用使得致密储层的孔隙明显增加,是致密储层增孔的主要成岩作用类型,也是寻找致密储层中“甜点”的关键因素之一。  相似文献   

13.
以NaCl颗粒在水中的溶解为例,对湍流状态下周期性变速旋转的(改变桨叶转向或速度大小,分别称为周期性换向搅拌和周期性依时搅拌)Rushton桨搅拌槽内的混合特性进行了实验研究,并与稳速搅拌进行了对比。实验过程中测量了不同搅拌模式、不同桨叶安装高度时颗粒的溶解时间,结果证明,搅拌槽底部的流型对NaCl的溶解有重要影响;桨叶安装高度对溶解速度的影响不大,周期性依时搅拌时的溶解时间比稳速搅拌时稍短,而周期性换向搅拌则能明显加快溶解速度,提高混合效率。  相似文献   

14.
Dissolution properties of calcined gangue   总被引:1,自引:0,他引:1  
To study the dissolution mechanism of gangue, dissolution characteristics of the gangue samples calcined at different temperatures in alkaline solutions and alkali metal silicate solutions with respect to Si and Al ions were analyzed by identical coupled plasma optical emission spectroscopy (ICP). The results show that the extent of dissolution of Al and Si varies with calcination temperature. It shows that the samples have a higher degree of dissolution in NaOH than in KOH medium. Si and Al appear to have synchro-dissolution behavior in alkaline solution, which means that Si and Al could dissolve from the mineral surface in certain linked forms. The result that a higher degree of dissolution exists in sodium silicate solution and a lower degree of dissolution exists in sodium-potassium silicate solution of Al is proved by the 29Si NMR spectra and the mean connectivity degree of these alkali metal silicate solutions.  相似文献   

15.
In order to simulate the instability phenomenon of a nonaqueous phase liquid(NAPL) dissolution front in a computational model, the intrinsic characteristic length is commonly used to determine the length scale at which the instability of the NAPL dissolution front can be initiated. This will require a huge number of finite elements if a whole NAPL dissolution system is simulated in the computational model. Even though modern supercomputers might be used to tackle this kind of NAPL dissolution problem, it can become prohibitive for commonly-used personal computers to do so. The main purpose of this work is to investigate whether or not the whole NAPL dissolution system of an annular domain can be replaced by a trapezoidal domain, so as to greatly reduce the requirements for computer efforts. The related simulation results have demonstrated that when the NAPL dissolution system under consideration is in a subcritical state, if the dissolution pattern around the entrance of an annulus domain is of interest, then a trapezoidal domain cannot be used to replace an annular domain in the computational simulation of the NAPL dissolution system.However, if the dissolution pattern away from the vicinity of the entrance of an annulus domain is of interest, then a trapezoidal domain can be used to replace an annular domain in the computational simulation of the NAPL dissolution system. When the NAPL dissolution system under consideration is in a supercritical state, a trapezoidal domain cannot be used to replace an annular domain in the computational simulation of the NAPL dissolution system.  相似文献   

16.
溶蚀在川东北飞仙关组储层演化中的意义   总被引:1,自引:0,他引:1  
四川盆地东北部下三叠统飞仙关组海相碳酸盐岩不仅分布广、厚度大、类型多,而且经历了多期成岩作用和构造作用的改造,形成了具有良好储集性能的滩相白云岩储层.通过对该区沉积发育史、成岩演化史、构造埋藏史和有机质热演化史分析,较深入研究了飞仙关组储层发育演化过程中的溶蚀作用.根据具体的溶蚀特征及化学充填物地球化学资料,识别出了同生-准同生期、液态烃期、气态烃期和构造抬升期等四期溶蚀作用;探讨了不同期次溶蚀作用的形成机理,提出了液态烃期和气态烃期埋藏溶蚀作用模式,总结出了溶蚀作用对储层性能的影响.  相似文献   

17.
This paper presents a unified theory to deal with when, why and how a sharp acidization dissolution front(ADF), which is represented by the porosity distribution curve, can take place in an acidization dissolution system composed of fluid-saturated porous rocks. The theory contains the following main points:(1) A reaction rate of infinity alone can lead to a sharp ADF of the Stefan-type in the acidization dissolution system. This sharp front is unstable when permeability in the downstream region is smaller than that in the upstream region.(2) For a finite reaction rate, when the acid dissolution capacity number approaches zero,the ADF can have a sharp profile of the Stefan-type either on a much smaller time scale or on a much larger time scale than the dissolution time scale. In the former case, the ADF may become unstable on a much larger time scale than the transport time scale, while in the latter case, it may become unstable if the growth rate of a small perturbation is greater than zero.(3) On the dissolution time scale, even if both the reaction rate is finite and the acid dissolution capacity number approaches zero, the profile of an ADF may not be sharp because it is in a transient state. In this case, not only can an ADF change its profile with time, but also its morphology can grow if the growth rate of a small perturbation is greater than zero. Due to the involvement of both the change rate and the growth rate of the ADF profile, it is necessary to conduct a transient linear stability analysis for determining whether or not a time-dependent ADF is stable in the acidization dissolution system.  相似文献   

18.
钢渣化学活性组分的提取与胶凝活性评价研究   总被引:1,自引:1,他引:0  
不同来源转炉钢渣之间的胶凝活性差异较大,为研究开发出对其胶凝活性进行快速评价的方法,采用蒸发-冷凝法对不同来源钢渣中的化学活性组分进行了快速溶出提取试验,研究了其溶出特性与溶出机理,结合钢渣胶凝材料胶砂试验,系统分析了钢渣溶出特性与胶凝材料强度性能之间的关系。研究结果表明,各钢渣化学活性组分的溶出量差异显著,溶出过程符合由固膜扩散控制的收缩未反应核模型特征。钢渣的溶出特性与钢渣胶凝性能之间存在显著的线性关系,利用(CaO+Al2O3)溶出量等评价指标可快速地对不同来源钢渣的胶凝活性作出比较准确的评价。  相似文献   

19.
利用岩芯观察、铸体薄片及荧光薄片鉴定,结合激光共聚焦显微镜、扫描电镜、X射线衍射、恒速压汞等分析测试手段,分析了准噶尔盆地吉木萨尔凹陷二叠系芦草沟组致密油储层成岩作用与储集空间特征及其相互关系。结果表明:吉木萨尔凹陷芦草沟组致密油储层主要发育碳酸盐岩类、陆源碎屑岩类、火山碎屑岩类和混积岩类等4种岩石类型,储集空间可分为次生溶孔、晶间孔和微裂缝3类; 不同岩石类型经历了不同的成岩作用过程,发育了不同类型的储集空间。①碳酸盐岩类中,泥晶云岩成分单一,压实致密,胶结作用弱,储集空间以白云石晶间孔为主; 随着粉砂质和凝灰质含量增加,压实作用变弱,长石和凝灰质发生强溶蚀,粉砂质砂屑云岩及凝灰质云岩的储集空间以长石粒内孔、铸模孔及凝灰质溶蚀孔为主。②陆源碎屑岩类中,凝灰质粉砂岩的压实作用中等,粉砂级长石颗粒粒内及边缘、分散状凝灰质溶蚀,且溶蚀孔中有大量的黏土矿物充填,储集空间以蜂窝状长石溶蚀孔、凝灰质溶蚀孔为主; 而云质泥岩压实作用强,溶蚀作用不发育,仅可见晶间孔及微裂缝。③火山碎屑岩类中,粉砂质凝灰岩、云质凝灰岩压实作用中等,长石、凝灰质易溶,但胶结物种类较多,储集空间以次生溶蚀孔为主,发育少量的晶间孔。  相似文献   

20.
The dissolution of molybdenite concentrate in NaCl electrolyte was investigated. The results show that the dissolution rate increases with the increase in liquid-to-solid ratio, stirring speed, NaCl concentration and temperature. When the liquid-to-solid ratio is 30:1, stirring speed is 400 r/min, concentration of NaCl is 4 mol/L at pH=9 and room temperature, the leaching efficiency of molybdenite concentrate will reach 99.5% in 240 min. Molybdenite concentrate cannot be electro-oxidized directly on the anode. The kinetic studies show that the dissolution of molybdenite concentrate is represented by shrinking core model with diffusion through a porous product layer of element sulfur, and the apparent activation energy for the dissolution reaction is 8.56 kJ/mol.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号