Settling basin design in a constructed wetland using TSS removal efficiency and hydraulic retention time

Using total suspended solid （TSS） removal efficiency and hydraulic retention time （HRT） as design parameters a design guideline of a settling basin in a constructed wetland （CW） was suggested; as well as management of sediment and particle in the settling basin. The CW was desiEned to treat the piggery wastewater effluent from a wastewater treatment plant during dry days and stonnwater runoff from the surrounding paved area during wet days. The first settling basin （FSB） in the CVV was theoretically designed with a total storage volume （TSV） of 453 ms and HRT of 5.5 hr. The amount of sediment and particles settled at the FSB was high due to the sedimentation and interception of plants in the CVV. Dredging of sediments was performed when the retention rate at the FSB decreased to approximately 80%. Findings showed that the mean flow rate was 21.8 m3/hr less than the designed flow rate of 82.8 m3/hr indicating that the FSB was oversize and operated with longer HRT （20.7 hr） compared to the design HRT. An empirical model to estimate the length of the settling basin in the CW was developed as a function of HRT and desired TSS removal efficiency. Using the minimum tolerable TSS removal efficiency of 30%, the length of the FSB was estimated to be 31.2 m with 11.8 hr HRT.     

Uncertainties in stormwater runoff data collection from a small urban catchment, Southeast China

Monitoring data are often used to identify stormwater runoff characteristics and in stormwater runoff modelling without consideration of their inherent uncertainties. Integrated with discrete sample analysis and error propagation analysis, this study attempted to quantify the uncertainties of discrete chemical oxygen demand (COD), total suspended solids (TSS) concentration, stormwater flowrate, stormwater event volumes, COD event mean concentration (EMC), and COD event loads in terms of flow measurement, sample collection, storage and laboratory analysis. The results showed that the uncertainties due to sample collection, storage and laboratory analysis of COD from stormwater runoff are 13.99%, 19.48% and 12.28%. Meanwhile, flow measurement uncertainty was 12.82%, and the sample collection uncertainty of TSS from stormwater runoff was 31.63%. Based on the law of propagation of uncertainties, the uncertainties regarding event flow volume, COD EMC and COD event loads were quantified as 7.03%, 10.26% and 18.47%.     

山地城市地表径流源区水质特征监测研究

2010年通过对山地城市重庆江北城区10个地表源区5次地表径流过程水样的采集与分析,研究城区地表径流水质特征及其影响因素,以期为地表径流污染源区控制提供科学依据.结果表明,山地城市重庆地表径流污染过程具有明显的初期冲刷效应,降雨强度影响地表径流水质的变化,地表径流水质的波动同雨强的变化呈同步趋势,雨强增加,污染物浓度下降,表现出水质变化的随机性.山地城市重庆地表径流COD、TP与TSS具有显著的正相关性.悬浮物是城市地表径流污染的主要污染物,而且是有机物质和磷素的载体.有机物质与磷素主要以颗粒态的形式存在,而氮素以溶解态的氨和硝酸盐为主.山地城市地表径流水质TSS、COD、TN、TP和NH4+-N在各个源区的差异显著,商业区和城市交通主干道TSS、COD和TP的浓度最高,其次为城市支路、居民区道路、停车场和屋顶.不透水地表功能、交通流量、人流量和卫生管理是影响地表径流水质的主要因素.城市商业区、交通干道和人流量高的居民区道路是城市地表径流污染的关键源区.     

高速公路路面雨水径流污染物排放特征研究

为了深入了解高速公路面源污染特征,本文对高速公路路面径流进行了监测分析.尽管径流过程中总悬浮物（TSS）、总化学需氧量（TCOD_Cr）、总氮（TN）和总磷（TP）的浓度以及颗粒物的丰度具有较大的变化幅度,但这些污染物的峰值浓度和颗粒物的峰值丰度基本上出现在径流开始后的10~30 min以内.TSS与TCOD_Cr、TN和TP的浓度之间存在着明显的相关性（r=0.444~0.955;p< 0.005）,意味着有相当数量的有机物和营养盐以颗粒物结合态存在.生化需氧量（BOD₅）与TCODcr的关系表明径流中的有机污染物可生化性较差.当降雨量和降雨强度在不同的范围变化时,其对径流污染物事件平均浓度的影响不同.绝大多数情况下,所研究的高速公路都会发生污染物的初期冲刷效应.前30%的径流可以携带46%±15%的TSS、54%±17%的TCOD_Cr、47%±13%的氮、52%±12%的磷以及在数量上占比为51%±12%的颗粒物.按照面源管理实践中80%的悬浮物的削减量的要求,应截留70%的径流,同时可以减少84%的有机物、78%的氮和81%的磷排放负荷.     

雨洪管理措施的水环境效应差异——基于Meta的中国案例分析

雨洪管理措施的应用可有效控制雨水径流量及其污染物,系统分析雨洪管理措施对径流及其污染物的影响有助于理解雨洪管理的水环境效应。本文基于Meta方法整理国内已发表的文献案例,通过提取雨洪管理措施的类型、应用尺度、降雨特征及径流量和污染物削减率等信息,综述了雨洪管理措施应用后径流量和污染物的变化。结果表明：（1）不同雨洪管理措施所产生的水环境效应存在差异,样本中屋顶绿化的径流削减能力最强,透水铺装的径流污染物削减效果最佳;（2）雨洪管理措施对水环境的影响具有尺度效应,大尺度区域内雨洪管理措施对径流量削减作用较弱,而小尺度区域内径流污染物削减作用较弱;（3）雨洪管理措施对径流量及其污染物的削减能力随降雨量增加呈下降趋势。结合案例数据,系统分析了雨洪管理措施在径流量及其污染物控制效果上的差异及成因,可为径流调控与污染治理等实践提供理论参考。     

大纵坡城市道路透水边带截留能力试验

道路是城市重要的交通纽带,一旦发生积水内涝,将导致城市交通瘫痪,甚至危及生命财产安全,特别是山地城市道路普遍存在纵坡大、雨水口截留效率低等突出问题,发生积水内涝和马路洪水的风险较高。针对上述问题,提出了利用透水边带提高大纵坡城市道路雨水径流截留效率的方法。在实验室搭建了城市单车道物理试验模型(比例1∶1),采用人工模拟降雨方法,系统研究了不同透水面积比、不同重现期降雨条件下透水边带对雨水径流的截留效率,并与传统道路雨水口截留能力进行了比较。试验结果表明:相同透水面积比条件下,雨水径流截留能力随着重现期的增大而减小;相同重现期条件下,雨水径流截留能力随着透水面积比的增加而增大,在重现期P=5 a时,透水边带面积比从12.5%增加到50%,雨水径流截留率从72.3%增加到79.3%。与传统雨水口截留能力相比,增加透水边带后雨水径流截留能力可提高30%左右。因此,大纵坡城市道路在不影响交通安全的条件下,可根据道路空间布局特征,通过设置透水边带来提高雨水径流的截流效率。     

山地城市典型硬化下垫面暴雨径流初期冲刷研究

为了解山地城市典型硬化下垫面暴雨径流初期冲刷效应,对山城重庆的8场暴雨进行了径流全过程监测,并与平原城市作了对比分析.结果表明:TSS(总悬浮物)、COD和TP来自城市交通干道的贡献较混凝土屋面大,而TN、NH3-N两者相当;对于重金属,除Cd外,城市交通干道重金属的EMC(Event Mean Concentration)值均高于混凝土屋面.城市交通干道,初期40%的暴雨径流携带了53%±16%TSS,66%±10%COD,59%±2%TN,58%±2%NH3-N,51%±5%TP;而混凝土屋面,初期40%的暴雨径流携带了64%±20%TSS,66%±17%COD,55%±14%TN,52%±14%NH3-N,56%±3%TP,建议两类硬化下垫面至少以初期40%的暴雨径流作为控制量.与平原城市相比,山地城市交通干道初期40%的暴雨径流携带污染负荷TSS与COD的比例比平原城市分别高出16%和22%,初期冲刷效应更加明显.     

2次降雨间隔时间对城市地表径流污染负荷的影响

2003～2005年通过对武汉市十里铺集水区12次降雨径流的水量和水质过程监测,研究了城市降雨径流污染负荷同2次降雨间隔时间的关系,探讨了城市地表状况、排水系统管理以及降雨特征在城市降雨径流污染负荷形成中的作用.结果表明,城市降雨径流污染负荷受2次降雨间隔时间和降雨径流量的共同影响.2次降雨间隔时间与初期降雨径流污染负荷存在显著的正相关关系 (p<0.01).汉阳地区城市地表卫生管理差和雨、污合流制的排水系统是城市径流污染负荷形成的主要原因.可以利用2次降雨间隔时间和降雨径流量预测城市降雨径流污染负荷.加强城市地表卫生管理和排水系统的管理,降低污染物在晴天累积的程度,从源头上减少污染物的数量,是有效控制城市降雨径流污染的首先途径.     

汇流路径对SWMM模型水量模拟结果的影响

随着城市雨水管理信息化的快速发展,数学模型逐渐在城市雨水系统规划设计中得到广泛应用,但模型的模拟精度已成为制约其广泛应用的瓶颈问题之一。以某低影响开发（low impact development,LID）雨水系统为例,基于SWMM模型,系统分析了不同重现期条件下,低影响开发设施占比和汇流路径的差异对雨水径流水量控制效果的影响。模拟结果表明:与不考虑汇流路径相比,考虑汇流路径时雨水径流外排总量削减率为4.32%~26.53%,峰值削减率为38.46%~61.40%。因此,汇流路径对雨水径流外排总量和峰值流量影响均较大,且随着LID设施占比升高而增大,随着降雨重现期的增加而降低。在场地开发过程中,可以通过合理的汇流路径设计,提高场地中LID设施对雨水径流的控制效果。同时,在利用模型对场地雨水控制利用效果评估时,也应充分考虑汇流路径对模拟结果的影响。     

Characterization of surface runoff from a subtropics urban catchment

Characteristics of surface runoff from a 0.14-km^2 urban catchment with separated sewer in Macau was investigated. Water quality measurements of surface runoff were carried out on five rainfall events during the period of August to November, 2005. Water quality parameters such as pH, turbidity, TSS, COD, TN, Zn, Pb, and Cu were analyzed. The results show that TN and COD are the major pollutants from surface runoff with mean concentration of 8.5 and 201.4 mg/L, both over 4-fold higher compared to the Class V surface water quality standard developed by China SEPA. Event mean concentration （EMC） for major pollutants showed considerable variations between rainfall events. The largest rainfall event with the longest length of antecedent dry weather period （ADWP） produced the highest EMC of TN, TSS and COD. From the pollutographs analysis, the peak concentration of TN precedes the peak runoff flow rate for all three rainfall events. The tendency of the concentration of TSS, turbidity and COD changing with runoff flow varies between rainfall events. The relationship between TSS and other parameters were analyzed to evaluate the efficiency of the physical treatment process to control the surface runoff in the urban catchment. Based on the correlation of parameters with TSS, high treatment efficiency of TSS, TN and COD was expected. The most significant event in term of first flush is the one with the strongest rainfall intensity and longest length of ADWP. TN always showed first flush phenomenon in all three rainfall events, which suggested that the surface runoff in the early stage of surface runoff should be dealt with for controlling TN losses during rainfall events.     

Sedimentation retention basin utilization for best management practice

Approaches to the artificial impoundment and theoretical design of sedimentation retention basin are reviewed with particular attention to best management practice(BMP) to control agriculture and surface runoff. Sediments retention basins are the small version of farm pond usedwhere a criteria of farm pond is not met. Such basin traps the pollutants and suspended solids prior to entry into streams and lakes. The study is focused with special reference to the assessment and control of non-point source pollution(NPSP) from the sub-basin area of Tai Lake in the Xishan County of Wuxi City of China, The author suggested two different approaches to conduct this study including theoretical design for sedimentation retention basin and computation of flow, sediment transport and deposition during the artificial impoundment of retention basin for BMP‘s utilization. Theoretical design will provide a useful function as a first line defense against the movement of sediments and transport of pollutants into the Tai Lake while the assessment of sediments deposition will help to make its proper use and periodic cleanup.     

黄土地区石油类污染物的径流污染模拟及模型预测

在土壤石油污染负荷为721－16060mg/kg、暴雨强度为 0.5－1.70mm/min的条件下进行了室内径流污染模拟试验研究．结果表明,随土壤石油污染负荷的提高,产流量与释放至水中的污染物浓度均增大,但产沙量降低;随暴雨强度的增大,产流、产沙、产污的强度均提高．试验条件下释放于水中的石油污染物浓度可高达1.56－15.6mg/L,由此进一步表明,暴雨径流对水体造成的石油污染不可轻视．在试验研究基础上,建立了径流污染过程的稳态产流、产沙、产污模型;应用该组模型对土壤石油污染负荷为 7050mg/kg和不同雨强下的径流污染进行了预测,预测结果与试验模拟结果吻合良好     

高速公路路面雨水径流下渗系统性能研究

为了分析径流下渗系统在径流削减和污染控制方面的性能,本文对一个高速公路路面雨水径流下渗系统性进行了监测.结果表明,降雨量、径流量、径流削减量和径流排放量之间存在明显的正相关性(r=0.82～0.97,p0.05).该系统表现出高效的径流削减能力,当降雨量小于20 mm时,可以削减70%以上的径流量.与径流削减相比,该系统在污染物负荷控制方面更为有效.当降雨量在0～10 mm之间时,污染负荷的削减率几乎为100%;而当降雨在10～20 mm之间时,污染负荷的削减率仍然可以超过60%.相对总氮(TN)和总磷(TP)而言,下渗系统对悬浮物(SS)和化学需氧量(COD_(Cr))的去除能力要更高、更稳定.研究表明,径流下渗系统作为雨水管理的工具,在径流削减和改善水质方面具有良好的性能.     

First flush of storm runoff pollution from an urban catchment in China

Storm runoff pollution process was investigated in an urban catchment with an area of 1.3 km^2 in Wuhan City of China. The results indicate that the pollutant concentration peaks preceded the flow peaks in all of 8 monitored storm events. The intervals between pollution peak and flow peak were shorter in the rain events with higher intensity in the initial period than those with lower intensity. The fractions of pollution load transported by the first 30% of runoff volume （FF30） were 52.2%-72.1% for total suspended solids （TSS）, 53.0%-65.3% for chemical oxygen demand （COD）, 40.4%-50.6% for total nitrogen （TN）, and 45.8%-63.2% for total phosphorus （TP）, respectively. Runoff pollution was positively related to non-raining days before the rainfall. Intercepting the first 30% of runoff volume can remove 62.4% of TSS load, 59.4% of COD load, 46.8% of TN load, and 54.1% of TP load, respectively, according to all the storm events. It is suggested that controlling the first flush is a critical measure in reduction of urban stormwater pollution.     

城市流域降雨径流水质特性及初期冲刷现象

为了解城市流域降雨径流水质特性及其初期冲刷现象,以重庆市盘溪河流域和虎溪流域为研究对象,对6场降雨径流进行监测. 结果表明:各场次降雨中,城市流域降雨径流污染物浓度均呈抛物线型分布;在所监测的6场降雨中,盘溪河流域ρ(TSS)(TSS为总悬浮物)、ρ(COD_Cr)、ρ(TN)、ρ(TP)平均值分别为2 000、420、13.0、5.7 mg/L,虎溪流域ρ(TSS)、ρ(COD_Cr)、ρ(TN)、ρ(NH₃-N)、ρ(NO₃--N)、ρ(TP)、ρ(Fe)、ρ(Zn)、ρ(Pb)、ρ(Cd)的平均值分别为33、38、2.6、0.7、1.1、0.1、2.1、0.2、0.6、0.06 mg/L. 在盘溪河流域和虎溪流域降雨径流中,磷均以颗粒态为主(分别占56%和87%),氮均以无机氮为主(分别占72%和82%). 盘溪河流域未发现明显的初期冲刷现象,虎溪流域初期40%的径流携带了50%~80%的污染负荷. 降雨径流流量分析表明,单峰降雨事件的峰值流量取决于且滞后于峰值雨强,多峰降雨事则件往往导致多峰流量响应.      

厦门市城市绿地雨洪减排效应评价

城市绿地在对雨水的渗透、滞留和调蓄方面具有非常显著的作用,能够有效削减城市的雨洪流量,缓解内涝压力.以海绵城市试点——厦门市为典型区,在日降雨数据、土地利用数据、土壤类型数据、城市绿地空间分布数据和城市建成区空间范围数据等多源数据的支撑下,系统评价了厦门市建成区城市绿地的雨洪减排效应.其中,雨洪减排效应的实物量通过SCS（Soil Conservation Service）模型进行评估,价值量则利用替代市场法进行估算.结果表明:2010年厦门市单位城市绿地削减的雨洪径流深为262.28 mm,削减的雨洪径流总量为4 385.40×104 m3,减排服务价值为2.75×108元;2015年单位城市绿地削减的雨洪径流深为335.77 mm,削减的雨洪径流总量为7 634.37×104 m3,减排服务价值为5.49×108元.城市绿地面积、降水量及其时程分配是影响城市绿地雨洪减排效应的关键因子,在其共同驱动下,2015年厦门市城市绿地的雨洪减排效应较2010年显著增加.研究显示,SCS模型在数据输入和参数率定等方面具有显著优势,能够在地理空间上连续模拟厦门市整个建成区的产流量,进而实现行政区单元和城市绿地类型单元雨洪减排效应的双重评价,3种城市绿地类型（乔木、灌木和草本）单位面积的雨洪减排效应并无明显差异,受绿地面积支配,厦门市80%的城市绿地雨洪减排效应由乔木绿地产生.      

西南喀斯特流域泥沙来源、输移、平衡的思考——基于坡地土壤与洼地、塘库沉积物~(137)Cs含量的对比

汇总了西南喀斯特地区坡地土壤和洼地、塘库沉积泥沙的~(137)Cs比活度资料,并进行了对比,分析流域泥沙来源。坡地地面流失轻微的,汇水面积小于0.5 km~2的微小流域,流域产沙主要源于地下流失(裂隙土)和沟岸侵蚀(沟壁土);坡地地面流失强烈的,主要源于坡地地面流失(坡地表层土壤)。地下流失和沟岸侵蚀是小流域和较大流域的主要产沙方式,且有随着流域面积增大,产沙贡献率越高的趋势。由于裂隙土和沟壁土都基本不含~(137)Cs,~(137)Cs单一示踪法不能区分这两种源地土体的产沙贡献率。建议采用多元示踪法,研究流域的泥沙来源。区分裂隙土和沟壁土的产沙贡献率,可考虑尝试磁性法和孢粉法。通过沉积物~(137)Cs断代等方法确定洼地、河流滩地和塘库泥沙淤积量,结合径流小区和水文站输沙量资料,分析不同类型洼地、河流滩地和塘库的泥沙截留率,分析河流泥沙输移比。在查明泥沙来源,泥沙输移比和输沙量(或产沙量)的基础上,确定流域泥沙平衡,结合径流研究成果,建立喀斯特流域产沙模型。     

Total pollution effect of urban surface runoff

For pollution research with regard to urban surface runo , most sampling strategies to date have focused on di erences in land usage. With single land-use sampling, total surface runo pollution e ect cannot be evaluated unless every land usage spot is monitored. Through a new sampling strategy known as mixed stormwater sampling for a street community at discharge outlet adjacent to river, this study assessed the total urban surface runo pollution e ect caused by a variety of land uses and the pollutants washed o from the rain pipe system in the Futian River watershed in Shenzhen City of China. The water quality monitoring indices were COD (chemical oxygen demand), TSS (total suspend solid), TP (total phosphorus), TN (total nitrogen) and BOD (biochemical oxygen demand). The sums of total pollution loads discharged into the river for the four indices of COD, TSS, TN, and TP over all seven rainfall events were very di erent. The mathematical model for simulating total pollution loads was established from discharge outlet mixed stormwater sampling of total pollution loads on the basis of four parameters: rainfall intensity, total land area, impervious land area, and pervious land area. In order to treat surface runo pollution, the values of MFF30 (mass first flush ratio) and FF30 (first 30% of runo volume) can be considered as split-flow control criteria to obtain more e ective and economical design of structural BMPs (best management practices) facilities.     

重庆市不同材质屋面径流水质特性

2010年雨季对重庆市6场降雨时段的屋面径流进行采样监测,分析了水泥屋面和瓦屋面径流污染物的出流过程和初始冲刷现象,并且运用多元统计方法分析了降雨特征对径流水质的影响.结果表明:2种材质屋面径流水质参数中CODCr和TN的次降雨平均浓度(EMC,以ρ计)均超出GB 3838—2002《地表水环境质量标准》的Ⅴ类标准,为屋面径流主要污染物.水泥屋面的CODCr、TN、NO3--N、TSS、Cu和Zn的EMC明显高于瓦屋面,分别高出1.63、1.57、1.15、1.70、1.50和1.88倍.在水泥屋面上,ρ(CODCr)、ρ(TN)、ρ(TP)和ρ(TSS)变化幅度大于瓦屋面,并且其峰值滞后或同步于最大雨强;在瓦屋面上,ρ(CODCr)、ρ(TN)、ρ(TP)和ρ(TSS)的峰值提前或同步于最大雨强.瓦屋面各污染物FF30(初期30%径流携带的污染负荷)的平均值均高于水泥屋面;水泥屋面各污染物(除Zn和Cd外)FF30的标准差均高于瓦屋面.各污染物的EMC与降雨量、平均雨强、径流量和最大雨强呈负相关;溶解态重金属的EMC与前期晴天数呈负相关,其余指标均与前期晴天数呈正相关.      

红壤丘陵区小流域典型土地利用的面源氮磷输出特征

科学识别不同土地利用方式下的径流污染输出特征是治理流域面源污染的前提.以南方红壤丘陵地区小流域为例,野外实地观测对比了不同降雨特征下林地、种植用地和建设用地的水文过程和面源污染物输出过程.结果表明,土地利用方式影响着地表径流的水文水质过程,典型降雨下3类用地类型产流时间及产流累积雨量的特征为：建设用地（9 min,2.0 mm）、种植用地（35 min,11.4 mm）和林地（108 min,24.0 mm）;而3种用地类型的总悬浮物（TSS）、总氮（TN）和总磷（TP）的污染物浓度、形态、氮磷比变化及输出强度等污染输出过程特征也呈现明显差异.典型降雨下不同用地类型具有相似的污染输出阶段,径流初期的TSS、TN和TP质量浓度均偏高,之后逐步趋于稳定;产流过程的前30 min贡献TSS、TN及TP负荷的范围均在23%~43%之间.年尺度下,各用地类型对TN和TP负荷的贡献率及单位面积负荷比存在明显差异,表现为种植用地污染负荷贡献最高（57%和45%）,而建设用地单位面积负荷比最高（9.50~12.50）.结果亦表明小流域面源污染关键源区的分布具有时空动态变化特征,由汇水单元内的用地类型组成和年降雨特征等综合决定;随着次降雨量的增加,主要贡献源由建设用地向种植用地动态转变,治理时需要根据关键源区的分布特征及下垫面产流过程规律进行针对性生态拦截.