Stability of the Third Generation Intensifier under Illumination

The stability under illumination of transmission-mode GaAs photocathode sealed in the third generation intensifier is investigated by use of spectral response testing instruments. The variations of spectral response with the illumination times under weak and intense illumination are compared. The variations of photoemission performance parameters are also characterized. The results show that during initial several weak illuminations photocathode behaves no evident decay and a maximum sensitivity is achieved, while under intense illumination the sensitivity of photocathode begin to decrease largely at the first illumination. The calculated performance parameters show that the variation of surface escape probability with illumination times is a direct cause of instability of photocathode. It is also found that under intense illumination peak wavelength is moved towards short-wave and peak response is decreased, which shows that the ability of long-wave response of photocathode is decreased.     

Open Rule-setting System Applied to Conceptual Design of Engines

Open rule-setting method advanced in this paper concentrates on providing designers of engines with a convenient way to express their design innovations and develop the expected prototypes in the early CAD stage, and constitute effective models for the following analysis process of CAE and CAPP. The problems arisen in the process of conceptual design with the traditional experience-based development method are analyzed. Based on those analyses, open rule-setting method is presented and some associated technical problems are discussed. The functional framework of open rule-setting system was built as software engineering methods. The speciality of the engine product as a kind of complex product and the requirement of the engine product based on its structural particularity to rule-setting system are considered carefully. A demonstration is supplied to illustrate how the open rule-setting method enhances the efficiency and quality of the engine conceptual design.     

Research on Linux Network Device Driver

By analyzing the working principle of Linux network device driver, discussing the Linux network driver structure and its key technologies, the general network driver structure and its design methodologies in Linux system are summarized. Through modifying the network device driver of Linux device driver 3rd version snull, c and improving the COW technology, the Zero-Copy technology in Linux （kernel version 2.6.11 ） is implemented. In the end, the success test tells us that the thorough analysis of network device driver is the foundation of many applications, and it also provides a certain improvement to a lot of real applications, even to military application development.     

Passive Acoustic Radar for Detecting Supersonic Cruise Missile

A Passive Acoustic Radar is presented as a necessary complement to electromagnetic wave radar, which will be expected to be an effective means for detecting cruise missiles. Acoustic characteristics of supersonic flying projectiles with diverse shapes are expounded via experiment. It is pointed out that simulation experiment could be implemented using bullet or shell instead of cruise missile. Based on theoretical analysis and experiment, the ““acoustic fingerprint““ character of cruise missile is illustrated to identify it in a strong noise environment. After establishing a locating mathematical model, the technique of acoustic embattling is utilized to resolve a problem of confirming the time of early-warning, considering the fact that velocity of sound is much slower than that of light. Thereby, a whole system of passive acoustic radar for detecting supersonic cruise missile is formed.     

Algorithm for Multi-laser-target Tracking Based on Clustering Fusion

Multi-laser-target tracking is an important subject in the field of signal processing of laser warners. A clustering method is applied to the measurement of laser warner, and the space-time fusion for measurements in the same cluster is accomplished. Real-time tracking of multi-laser-target and real-time picking of multi-laser-signal are introduced using data fusion of the measurements. A prototype device of the algorithm is built up. The results of experiments show that the algorithm is very effective.     

Super-resolution Restoration of Remote-sensing Images

A novel image restoration scheme, which is super-resolution image restoration algorithm Poisson-maximum-afterword-probability based on Markvo constraint （MPMAP） combined with evaluating image detail parameter D, has been proposed. The advantage of super-resolution algorithm MPMAP incorporated with parameter D lies in the fact that superresolution algorithm MPMAP model is discrete, which is in accordance with remote-sensing imaging model, and the algorithm MPMAP is proved applicable to linear and non-linear imaging models with a unique solution when noise is not severe. According to simulation experiments for practical images, super-resolution algorithm MPMAP can retain image details better than most of traditional restoration methods; at the same time, the proposed parameter D can help to identify real point spread function （PSF） value of degradation process. Processing result of practical remote-sensing images by MPMAP combined with parameter D are given, it illustrates that MPMAP restoration scheme combined PSF estimation has a better restoration result than that of Photoshop processing, based on the same original images. It is proved that the proposed scheme is helpful to offset the lack of resolution of the original remote-sensing images and has its extensive application foreground.     

Design and Simulation of TF and TA Controller for Missile

A nonlinear terrain following(TF) and terrain avoidance(TA) controller is proposed for missile control systems. Based on classical TF algorithm (adaptive angle method), a new method for TF controller is proposed by using angle of attack. A method of obtaining terrain outline data from digital elevation map (DEM) for TF control is discussed in order to save store space. A TA algorithm is proposed by using bank-to-turn technique. The block control model, which is suitable for backstepping design, is given for nonlinear model of missile. Making full use of the characteristics of the system and combining block control principle and backstepping technique, a robust controller design method is proposed. Uncertainties in every sub-block are allowed, and can be canceled by using the idea of nonlinear damping. It is proved that the state tracking errors are converged to a neighborhood of the origin exponentially. Finally, nonlinear six-degree-of-freedom simulation results for the missile model are presented to demonstrate the effectiveness of the proposed control law.     

Design and Analysis of Test Schemes of Static Postponing Time on Shrapnels Used to Riot Control

The test scheme of static postponing time given in our actual national military test standard on shrapnels used to control riot is a nine-point test scheme on the combined action of three kinds of temperatures and three kinds of pressures,the consumed ammunitions are more excessive. Statistic analysis and tentative checkout about a lot of test data are done,feasibility gists are put forward for optimizing of the test design scheme. The optimizing design and data analysis of test scheme of the item are done by managing uniformity design theory, two scientific and reasonable six-point test schemes are confirmed. The feasibility and reliability of the optimizing design schemes put forward above are proved ulteriorly by test validating. The gained schemes not only have good design uniformity and little ammunition wastage and meet the test demand, but also have better forecast ability for the result data of other points using the mathematic models from the actual test points.     

Influence of Installing Error on the Surface Shape Precision of the Axial Symmetry Aspheric Workpiece in Lapping

A method to calculate the surface shape error, which is caused by the installing error between the workpiece and the lapping tool in the process of form lapping, is proposed. The mathematical model which the installing translation error influences on the workpiece surface shape error is established. The changing rule of the error is simulated through the calculating example of the paraboloid workpiece. The results indicate that the surface shape error of the workpiece is increasing with the increase of the installing translation error, it is also increasing gradually along the center point of the curve surface to the edge, and the influence is severer to the curve surface with great curvature than that of the small curvature when the translation error is the same.     

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

The paper introduces the performances of magnetostrictive actuators and its applications, discusses the design methods for the structure and internal magnetic circuit of a giant magnetostrictive actuator, and makes tests on the output displacement and force characteristics for an actuator using homemade magnetostrictive material. The experimental result shows that the actuator has satisfactory output precisions and ranges in transient and stable states, and can be used in lowfrequency vibration control system of precise equipment.     

Overview of Anti-tank Mines

First the different anti-tank mines laying possibilities are shortly summarized： hand emplaced, with mine layers, ground or helicopter relatively topographical well defined, and with cluster systems of projectiles, rockets and aircraft dispensers. Then examples of the three generations of anti-tank mines are presented：Ⅰ generation： detonating only beneath the track; Ⅱ generation： detonating beneath the track and belly; Ⅲ generation： mines with off-route actions. Weight and cost comparisons are strongly favoring the off-route Ⅲ-generation mines.     

A Finite Element Analysis on Static Strength of a Complex Section

A static finite element analysis （FEA） of an impulsive controller section is presented. The boundary condition and a part of the loads are applied. Considering the grades of the stress around the holes being large, the dense grids are adjusted accordingly. Four cases with different loads are compared, thus the influences of different loads on the section are analyzed. Numerical results show that the maximum stress of the section is lower than the strength limit of the material, and the section will not be broken with the static loads.     

Discussion on Mechanism of Breech-Blow Caused by Propellant Charge

From the view point of launch safety caused by fracture of propellant charge, this paper points out that the safety criterion of pressure wave is inadequate to evaluate the launch safety of propellant charge based on the initial negative differential pressure and sensitivity tests. Generally, the maximum barrel pressure does not depend upon the intensity of pressure wave correspondingly. The pressure wave intensity can not describe the fracture degree of propellant charge in chamber and reflect the mechanical environment of propellant charge fracturing exactly and wholly. The evaluation criterion for launch safety of propellant charge should be built on the basis of depicting the fracture degree of propellant bed.     

Experimental Studies of Toxicity on HNIW and Its Intermediates

The polycyclic nitramine hexanitrohexaazaisowurtane（HNIW） is a compound of high energy density. HNIW can replace 1, 3, 5-trinitro-1, 3, 5-triazacyclohexane（RDX） or HMX, hut its toxicity is unknown. In this paper, HNIW, hexabenzylhexaazaisowurtzitane （HBIW）, tetraacetyldibenzulhexaazaisowurtzitane （TADBIW）, tetraacetyldiformylhexaazaisowurtzitane（TADFIW） and tetraacetylhexaazaisowurtzitane（TAIW）, which are intermediates of the synthesis of the HNIW, were selected as the tested objects in acute toxicity test, acute eye stimulation test and skin irritation test according to the standards of ＂chemical product testing method-401 ： acute oral toxicity test＂, ＂chemical product testing means-405： acute eye irritation/corrosion test＂ and ＂chemical product testing means-404： acute dermal irritation/corrosion test＂ of National Circumstance Protect Bureau. The results show that all of the five objects have no toxicity, no stimulation to eye and skin under the tested conditions.     

Dynamic Simulation for Missile Erection System

In order to study the dynamic characteristics of the missile erection system, it can be considered as a rigid-flexible coupling multi-body system. Firstly, the actual system is abstracted as an equal and simplified one and then the forces applied to it are analyzed. Secondly, the rigid-flexible coupling dynamic simulation for erection system is accomplished by use of the system simulation software, for example Pro/E, ADAMS, ANSYS, MATLAB/Simulink, etc. Finally, having the aid of simulation results, the kinetic and dynamic characteristics of the flexible bodies in erection system are analyzed.The simulation considering the erection system as a rigid-flexible coupling system can provide valuable results to the research of its kinetic, dynamic and vibrational characteristics.     

Analysis of Unsteady Supercavitating Flow Around a Cone Cavitator

Based on an integral equation method, the unsteady supercavitating flow around a slender cone cavitator is studied. The shape and length of supercavity is calculated respectively by using a finite difference time discrete method. Their characteristics varying with the cone angle and cavitation number are investigated respectively. It can be seen obviously that the change of supercavity is characterized by retardation and waviness.     

Research on First Attack Probability Model of an Attacker Level Bombing Anti-air Radars

The paper mainly studies the first attack probability （FAP） of an attacker level bombing anti-air radars through analyzing the radiant point orientation and attack （RPOA） process of attackers. Firstly, the searching target process is analyzed, and a corresponding target finding model is brought forward. Secondly, the target approaching process is concretely analyzed when the attacker levelly bombs the anti-air radar, and a corresponding target approaching model is presented. Finally, a demonstration is given to analyze the major factors in the model and prove its validity.     

Design of Non-fragile Satisfactory Estimator for Linear Continuous Perturbed Stochastic Systems

The design problem of non-fragile estimator is addressed for a class of perturbed linear continuous systems. The perturbations occur on the plant and estimator parameters. The estimator designed should force the error system to achieve the desired decay rate and force the steady error variance less than the specified upper bound irrdevancy of the admissible plant perturbations and estimator perturbations. Consistency problem of the decay rate with the variance upper bound is first considered via linear matrix inequality （LMI） approach. The solution of the estimator parameter under specifications to be consistent is then discussed. The consistency condition of specifications and estimator parameter solution are transformed to feasible or minimum problems subject to a set of LMI respectively. The method is illustrated by a numerical example.     

Piecewise Filter of Infrared Image Based on Moment Theory

The disadvantages of IR images mostly include high noise, blurry edge and so on. The characteristics make the existent smoothing methods ineffective in preserving edge, To solve this problem, a piecewise moment filter （PMF） is put forward. By using moment and piecewise linear theory, the filter can preserve edge. Based on the statistical model of random noise, a related-coefficient method is presented to estimate the variance of noise. The edge region and model are then detected by the estimated variance. The expectation of first-order derivatives is used in getting the reliable offset of edge. At last, a fast moment filter of double-stair edge model is used to gain the piecewise smoothing results and reduce the calculation. The experimental result shows that the new method has a better capability than other methods in suppressing noise and preserving edge.     

Research on Gear-broken Fault Diagnosis in a Tank Gearbox

A fault diagnosis method of working position gear in a tank gearbox is put forward based on simulating the fault of working position gear in an actual tank, extracting the envelope of vibration signal by Hilbert transformation amplitude demodulation method, and zooming the low-frequency band to envelope signal.