Fabrication and characterization of carbon nanotube reinforced poly(methyl methacrylate) nanocomposites

Multiwall carbon nanotube (CNT) reinforced poly(methyl methacrylate) (PMMA) nanocomposites have been successfully fabricated with melt blending. Two melt blending approaches of batch mixing and continuous extrusion have been used and the properties of the derived nanocomposites have been compared. The interaction of PMMA and CNTs, which is crucial to greatly improve the polymer properties, has been physically enhanced by adding a third party of poly(vinylidene fluoride) (PVDF) compatibilizer. It is found that the electrical threshold for both PMMA/CNT and PMMA/PVDF/CNT nanocomposites lies between 0.5 to 1 wt% of CNTs. The thermal and mechanical properties of the nanocomposites increase with CNTs and they are further increased by the addition of PVDF For 5 wt% CNT reinforced PMMA/PVDF/CNT nanocomposite, the onset of decomposition temperature is about 17 degrees C higher and elastic modulus is about 19.5% higher than those of neat PMMA. Rheological study also shows that the CNTs incorporated in the PMMA/PVDF/CNT nanocomposites act as physical cross-linkers.     

Evaluation and modelling of electrically conductive polymer nanocomposites with carbon nanotube networks

Superior electrical, thermal, and mechanical properties of carbon nanotubes (CNTs) have made them effective filler for multifunctional polymer nanocomposites (PNCs). In particular, electrically conductive PNCs filled with CNTs have been researched extensively. These studies aimed to increase the PNCs' electrical conductivity (σ) and to minimize the percolation thresholds (ϕ_c). In this work, we have developed an improved model to describe the CNT networks and thereby evaluate the PNCs' ϕ_c and σ. The new model accounts for the electrical conductance contributed by the continued CNT network across the boundary of adjacent representative volume elements. It more realistically represents the interconnectivity among CNTs and enhances the evaluation of the structure-to-property relationship of PNCs' σ.     

The relationship between microstructure and mechanical properties of carbon nanotubes/polylactic acid nanocomposites prepared by twin-screw extrusion

Twin-screw extrusion was applied to prepare the carbon nanotubes/polylactic acid (CNT/PLA) nanocomposites. Five different extruded plates were produced under variation of CNT concentrations. The internal microstructures were also observed by optical microscope to examine the distribution and dispersion of CNT in the PLA. Besides, the crystallinity of the CNT/PLA nanocomposites was investigated by differential scanning calorimetry (DSC) and density method. The effects of the CNT concentrations on the mechanical and electrical properties of the nanocomposites were investigated. Scanning electron microscope (SEM) was performed to observe the CNT dispersion in the nano-scale. These results suggested that the crystallinity was increased with the increase of CNT concentrations, demonstrating that CNT played a role as a nucleating agent in PLA. Moreover, the mechanical and electrical properties of PLA have been improved by a proper incorporation of CNTs due to a good distribution and dispersion of the CNTs.     

Self-sensing and mechanical performance of CNT/GNP/UHMWPE biocompatible nanocomposites

Ultra-high molecular weight polyethylene (UHMWPE)-based conductive nanocomposites with reduced percolation and tunable piezoresistive behavior were prepared via solution mixing followed by compression molding using carbon nanotubes (CNT) and graphene nanoplatelets (GNP). The effect of varying wt% of GNP with fixed CNT content (0.1 wt%) on the mechanical, electrical, thermal and piezoresistive properties of UHMWPE nanocomposites was evaluated. The combination of CNT and GNP enhanced the dispersion in UHMWPE matrix and lowered the probability of CNT aggregation as GNP acted as a spacer to separate the entanglement of CNT with each other. This has allowed the formation of an effective conductive path between GNP and CNT in UHMWPE matrix. The thermal conductivity, degree of crystallinity and degradation temperature of the nanocomposites increased with increasing GNP content. The elastic modulus and yield strength of the nanocomposites were improved by 37% and 33%, respectively, for 0.1/0.3 wt% of CNT/GNP compared to neat UHMWPE. The electrical conductivity was measured using four-probe method, and the lowest electrical percolation threshold was achieved at 0.1/0.1 wt% of CNT/GNP forming a nearly two-dimensional conductive network (critical value, t = 1.20). Such improvements in mechanical and electrical properties are attributed to the synergistic effect of the two-dimensional GNP and one-dimensional CNT which limits aggregation of CNTs enabling a more efficient conductive network at low wt% of fillers. These hybrid nanocomposites exhibited strong piezoresistive response with sensitivity factor of 6.2, 15.93 and 557.44 in the linear elastic, inelastic I and inelastic II regimes, respectively, for 0.1/0.5 wt% of CNT/GNP. This study demonstrates the fabrication method and the self-sensing performance of CNT/GNP/UHMWPE nanocomposites with improved properties useful for orthopedic implants.     

Electrical conductive CNT-PVA/PC nanocomposites with high tensile elongation

Electrically conductive CNT reinforced polycarbonate matrix nanocomposites with high strain-to-failure were fabricated by inserting polyvinylalcohol as a surface modifier through a melt blending process. The addition of PVA by coating the CNT through a simple ball milling process before melt blending with a polycarbonate matrix resulted in an increased percolation limit as compared to that prepared using uncoated CNTs, while the electrical conductivity was maintained at a similar level of 2 x 10(-2) S/cm. However, tensile elongation was considerably improved by the addition of PVA and remained at 81% even though 5 wt% of the CNTs were added for electrical conductivity, while elongation dropped to 25% when the CNTs were not coated with PVA. The addition of PVA induces homogeneous dispersion of CNTs during the melt blending process and can enhance both electrical conductivity and mechanical durability.     

Low density polyethylene – Chitosan composites

With the aim of develop new materials for active food packaging, composites of low-density polyethylene (LDPE) with chitosan (CS) or chitosan sodium montmorillonite clay nanocomposites (CSnano), with or without Irganox 1076 commercial synthetic antioxidant or vitamin E (VE) as natural antioxidant were prepared by melt processing. The obtained materials have been characterized by processing behavior, mechanical and thermal properties, positive groups determination, atomic force microscopy and standard tests to assess antimicrobial and antioxidant activities. The compositions assuring insignificant decrease in mechanical and thermal properties were selected as LDPE/3CSnano/VE and LDPE/6CSnano/VE. It has been shown the chitosan imparts antimicrobial properties to LDPE films while the vitamin E increased the oxidation induction period, especially for materials containing chitosan nanocomposites. The incorporation of both chitosan nanocomposites and vitamin E in polyethylene gave films with good antimicrobial and thermal properties because of significant increase of charge surface and important changes in surface topology and antimicrobial activity because of a synergistic effect. The nanocomposites cannot only passively protect the food against environmental factors, but they may enhance shelf life of food products.     

Structure–property relationships in isotactic polypropylene/multi-walled carbon nanotubes nanocomposites

In this work, the influence of multi-walled carbon nanotubes (MWCNT) on electrical, thermal and mechanical properties of CNT reinforced isotactic polypropylene (iPP) nanocomposites is studied. The composites were obtained by diluting a masterbatch of 20 wt.% MWCNT with a low viscous iPP, using melt mixing. The morphology of the prepared samples was examined through SEM, Raman and XRD measurements. The effect of MWCNT addition on the thermal transitions of the iPP was investigated by differential scanning calorimetry (DSC) measurements. Significant changes are reported in the crystallization behavior of the matrix on addition of carbon nanotubes: increase of the degree of crystallinity, as well as appearance of a new crystallization peak (owing to trans-crystallinity). Dynamic mechanical analysis (DMA) studies revealed an enhancement of the storage modulus, in the glassy state, up to 86%. Furthermore, broadband dielectric relaxation spectroscopy (DRS) was employed to study the electrical and dielectric properties of the nanocomposites. The electrical percolation threshold was calculated 0.6–0.7 vol.% MWCNT from both dc conductivity and dielectric constant values. This value is lower than previous mentioned ones in literature in similar systems. In conclusion, this works provides a simple and quick way for the preparation of PP/MWCNT nanocomposites with low electrical percolation threshold and significantly enhanced mechanical properties.     

Influence of carbon nanotube-polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene

Study was made of the effect of multiwall carbon nanotubes (MWCNTs) and polymeric compatibilizer on thermal, mechanical, and tribological properties of high density polyethylene (HDPE). The composites were prepared by melt mixing in two steps. Carbon nanotubes (CNTs) were melt mixed with maleic anhydride grafted polyethylene (PEgMA) as polymeric compatibilizer to produce a PEgMA-CNT masterbatch containing 20 wt% of CNTs. The masterbatch was then added to HDPE to prepare HDPE nanocomposites with CNT content of 2 or 6 wt%. The unmodified and modified (hydroxyl or amine groups) CNTs had similar effects on the properties of HDPE-PEgMA indicating that only non-covalent interactions were achieved between CNTs and matrix. According to SEM studies, single nanotubes and CNT agglomerates (size up to 1 μm) were present in all nanocomposites regardless of content or modification of CNTs. Addition of CNTs to HDPE-PEgMA increased decomposition temperature, but only slight changes were observed in crystallization temperature, crystallinity, melting temperature, and coefficient of linear thermal expansion (CLTE). Young’s modulus and tensile strength of matrix clearly increased, while elongation at break decreased. Measured values of Young’s moduli of HDPE-PEgMA-CNT composites were between the values of Young’s moduli for longitudinal (E₁₁) and transverse (E₂₂) direction predicted by Mori-Tanaka and Halpin-Tsai composite theories. Addition of CNTs to HDPE-PEgMA did not change the tribological properties of the matrix. Because of its higher crystallinity, PEgMA possessed significantly different properties from HDPE matrix: better mechanical properties, lower friction and wear, and lower CLTE in normal direction. Interestingly, the mechanical and tribological properties and CLTEs of HDPE-PEgMA-CNT composites lie between those of PEgMA and HDPE.     

Effect of pretreatment of bagasse fibers on the properties of chitosan/microfibrillated cellulose nanocomposites

Bleached bagasse pulp was pretreated with dilute alkali and xylanase enzymes before isolation of microfibrillated cellulose using ultra-high friction grinding and high-pressure homogenization. The isolated nanofibers were used with chitosan polymer to prepare chitosan nanocomposites by solution casting at nanofiber loading from 2.5 to 20%. The effect of nanofibers loading on moisture sorption, dry and wet tensile strength, crystallinity, thermal stability, and dynamic mechanical thermal properties was studied using tensile testing, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA). Nanocomposites with good transparency were obtained at the different nanofibers loadings. Chitosan nanocomposites made using nanofibers isolated from bagasse fibers treated with xylanase or alkali showed higher dry and wet tensile strength than those made using nanofibers isolated from untreated bagasse pulp. DMTA results showed higher storage modulus and indicated higher glass transition temperature for the chitosan nanocomposites than that of neat chitosan. XRD patterns showed that, at low nanofibers loading, addition of bagasse nanofibers to chitosan matrix increased ordering of chitosan chains upon drying the nanocomposites films.     

In situ polymerized nanocomposites: Polystyrene/CNT and Poly(methyl methacrylate)/CNT composites

Carbon nanotubes (CNTs) were incorporated into polystyrene (PS) and poly(methyl methacrylate) (PMMA) matrices via in situ emulsion and emulsion/suspension polymerization methods. The polymerizations were carried out using various initiators, surfactants, and carbon nanotubes to determine their influence on polymerization and on the properties of the composites. The loading of CNTs in the composites varied from 0 to 15 wt.%, depending on the CNTs used. Morphology and dispersion of the CNTs were analyzed by transmission and scanning electron microscopy techniques. The dispersion of multi-walled carbon nanotubes (MWCNT) in the composites was excellent, even at high CNT loading. The mechanical properties, and electrical and thermal conductivities, of the composites were also analyzed. Both electrical and thermal conductivities were improved.     

Electrical and dielectric properties of polypropylene nanocomposites based on carbon nanotubes and barium titanate nanoparticles

Functional polypropylene (PP) nanocomposites were prepared by melt compounding with multiwalled carbon nanotubes (MWNT) as the electrically conductive component and barium titanate (BT) spherical nanoparticles as the ferroelectric component. To make PP electrically conductive, more than 3 wt.% MWNT is required. Surface modification of either MWNT or BT with titanate coupling agent further improves the electrical conductivity of the PP/MWNT/BT ternary nanocomposites. Interestingly, by modifying both MWNT and BT, 2 wt.% MWNT are sufficient to make the ternary nanocomposite electrically conductive. In addition, the incorporation of MWNT greatly increases the dielectric permittivity of PP/BT nanocomposites. However, to retain a low dielectric loss, the MWNT loading should be slightly less than the percolation threshold of the nanocomposites. The improved electrical conductivity and dielectric properties make the ternary nanocomposites attractive in practical applications.     

Effects of carbon black-carbon nanotube complex fillers on the properties of isotactic polypropylene nanocomposites

In this study, the reinforcing effects of carbon black (CB) and carbon nanotube (CNT) complex fillers on the properties of isotactic polypropylene (iPP) nanocomposites were investigated using various methods. The surface of the CNTs was modified using a linear alkyl chain in order to create a homogeneous CNT dispersion in the iPP matrix. When the CB content that was incorporated in the iPP matrix increased, the thermal and mechanical properties of the iPP/CB nanocomposites were enhanced. Additionally these enhancements in the properties were similarly induced by introducing a small amount of alkylated CNTs (a-CNTs). In contrast, the CB/a-CNT complex filler was more effective for the iPP nanocomposites than the CB or a-CNT single filler in terms of the thermal stability and the electrical properties. However, the mechanical properties of the CB/a-CNT complex filler incorporated iPP nanocomposites were poorer than the only a-CNT incorporated iPP nanocomposites. Additionally, the complex filler did not overcome the nucleation behavior of the a-CNTs in the re-crystallization of iPP.     

Effect of multi-walled carbon nanotubes on mechanical,thermal and electrical properties of phenolic foam via in-situ polymerization

In this study, phenolic foam (PF)/multi-walled carbon nanotubes (MWCNTs) composites were fabricated by in-situ polymerization, and carbonized foams based on these PF foams were prepared and the electrical property was investigated. TEM results indicated excellent dispersion of MWCNTs in the phenolic resin matrix. Scanning electron microscope results indicated that PF composites exhibited smaller cell size, thicker cell wall thickness, and higher cell density, compared with pure PF. The incorporating of MWCNTs significantly improved the mechanical properties of PF. All PF composites showed a lower thermal conductivity versus pure PF. Moreover, the carbonized pure and composites PF exhibited open-cell three-dimensional skeleton carbon structure and the MWCNTs were well-dispersed on the surface of the skeletons. It is noteworthy that the introduction of MWCNTs significantly improved the electrical performances of foams and carbonized foams by construction of conductive MWCNTs network.     

Improving electrical conductivity and mechanical properties of high density polyethylene through incorporation of paraffin wax coated exfoliated graphene nanoplatelets and multi-wall carbon nano-tubes

High Density Polyethylene (HDPE) based nanocomposites are reinforced by exfoliated graphene nanoplatelets, GNP, and multi-wall carbon nano-tubes, MWCNT, through melt extrusion and injection molding in this study. Low molecular weight paraffin wax was selected as a coating on the surface of GNP and MWCNT to improve their dispersion in HDPE. Wax coated GNP and MWCNT were fabricated by mixing wax with GNP and MWCNT in hot xylene and followed with the solvent evaporation and vacuum drying. It was found that wax coated GNP and MWCNT are much more efficient than the uncoated ones in improving the electrical conductivity and the flexural properties of HDPE nanocomposites. Morphology characterization verified that the dispersion of GNP and MWCNT in the polymer matrix was significantly enhanced by this wax coating method which was responsible for the better electrical and mechanical properties in the resulting nanocomposites.     

Effect of surfactant treatment on thermal stability and mechanical properties of CNT/polybenzoxazine nanocomposites

The mechanical and thermo-mechanical properties of polybenzoxazine nanocomposites containing multi-walled carbon nanotubes (MWCNTs) functionalized with surfactant are studied. The results are specifically compared with the corresponding properties of epoxy-based nanocomposites. The CNTs bring about significant improvements in flexural strength, flexural modulus, storage modulus and glass transition temperature, T_g, of CNT/polybenzoxazine nanocomposites at the expense of impact fracture toughness. The surfactant treatment has a beneficial effect on the improvement of these properties, except the impact toughness, through enhanced CNT dispersion and interfacial interaction. The former four properties are in general higher for the CNT/polybenzoxazine nanocomposites than the epoxy counterparts, and vice versa for the impact toughness. The addition of CNTs has an ameliorating effect of lowering the coefficient of thermal expansion (CTE) of polybenzoxazine nanocomposites in both the regions below and above T_g, whereas the reverse is true for the epoxy nanocomposites. This observation has a particular implication of exploiting the CNT/polybenzoxazine nanocomposites in applications requiring low shrinkage and accurate dimensional control.     

Preparation, characterization and properties of acid functionalized multi-walled carbon nanotube reinforced thermoplastic polyurethane nanocomposites

The multi-walled carbon nanotube (MWNT) reinforced thermoplastic polyurethane (TPU) nanocomposites were prepared through melt compounding method followed by compression molding. The spectroscopic study indicated that a strong interfacial interaction was developed between carbon nanotube (CNT) and the TPU matrix in the nanocomposites. The microscopic observation showed that the CNTs were homogeneously dispersed throughout the TPU matrix well apart from a few clusters. The results from thermal analysis indicated that the glass transition temperature (T_g) and storage modulus (E′) of the nanocomposites were increased with increase in CNTs content and their thermal stability were also improved in comparison with pure TPU matrix. The rheological analysis showed the low frequency plateau of shear modulus and the shear thinning behavior of the nanocomposites. The electrical behaviors of the nanocomposites are increased with increase in weight percent (wt%) of CNT loading. The mechanical properties of nanocomposites were substantially improved by the incorporation of CNTs into the TPU matrix.     

Synthesis and characterization of biodegradable poly(l-lactide)/layered double hydroxide nanocomposites

This study reports the preparation and physical properties of biodegradable nanocomposites fabricated using poly(l-lactide) (PLLA) and magnesium/aluminum layered double hydroxide (MgAl-LDH). The MgAl-LDH with molar ratio of Mg/Al = 2 were synthesized by the co-precipitation method. In order to improve the chemical compatibility between PLLA and LDH, the surface of LDH was organically-modified by polylactide with carboxyl end group (PLA–COOH) using ion-exchange process. Then, the PLLA/LDH nanocomposites were prepared by solution intercalation of PLLA into the galleries of PLA–COOH modified LDH (P-LDH) in tetrahydrofuran solution. Both X-ray diffraction data and Transmission electron microscopy images of PLLA/P-LDH nanocomposites indicate that the P-LDHs are randomly dispersed and exfoliated into the PLLA matrix. Mechanical properties of the fabricated 1.2 wt.% PLLA/P-LDH nanocomposites show significant enhancements in the storage modulus when compared to that of neat PLLA. Adding more P-LDH into PLLA matrix induced a decrease in the storage modulus of PLLA/P-LDH nanocomposites, probably due to the excessive content of PLA–COOH moleculars with low mechanical properties. The thermal stability and degradation activation energies of the PLLA and PLLA/P-LDH nanocomposites can also be discussed.     

Microstructure and properties of polyurethane nanocomposites reinforced with methylene-bis-ortho-chloroanilline-grafted multi-walled carbon nanotubes

Methylene-bis-ortho-chloroanilline (MOCA), an excellent cross-linker widely used to prepare cured polyurethane (PU) elastomers with high performance, was used to modify a multi-walled carbon nanotube. PU/carbon nanotube (CNT) nanocomposites were prepared by incorporation of the MOCA-grafted CNT into PU matrix. Fourier transform infrared spectra have shown that the modified CNTs have been linked with PU matrix. The microstructure of composites was investigated by Field-Emission Scanning Electron Microscopy. The results of Dynamic Mechanical Thermal Analysis and Differential Scanning Calorimetry have investigated the grafted CNTs as cross-linker in the cured composites. The studies on the thermal and mechanical properties of the composites have indicated that the storage modulus and tensile strength, as well as glass transition temperature and thermal stability are significantly increased with increasing CNT content.     

聚乳酸/石墨/多壁碳纳米管复合材料的制备及性能

通过共溶剂法制备了由石墨(GN)和多壁碳纳米管(MWCNTs)掺杂的聚乳酸(PLA)纳米复合材料,借助扫描电镜等手段,研究了MWCNTs用量对复合材料微观结构、热稳定性、导热和导热性能及介电性能的影响。结果显示,MWC-NTs和GN在PLA基体中形成了稳定的导电和导热网络结构,从而导致复合材料具有较低的导电和导热逾渗阈值,其值约为MWCNTs/GN=0.5/1。MWCNTs和GN均匀分散和协同增强效应促使复合材料热稳定性、导热和导电性能明显提高。与纯PLA相比,填料在逾渗阈值附近的复合材料的初始分解温度提高了近16℃,导热系数提高了1倍,体积电阻降低了109数量级。     

Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites

A mixed micromechanics model was developed to predict the overall electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites. Two electrical conductivity mechanisms, electron hopping and conductive networks, were incorporated into the model by introducing an interphase layer and considering the effective aspect ratio of CNTs. It was found that the modeling results agree well with the experimental data for both single-wall carbon nanotube and multi-wall carbon nanotube based nanocomposites. Simulation results suggest that both electron hopping and conductive networks contribute to the electrical conductivity of the nanocomposites, while conductive networks become dominant as CNT volume fraction increases. It was also indicated that the sizes of CNTs have significant effects on the percolation threshold and the overall electrical conductivity of the nanocomposites. This developed model is expected to provide a more accurate prediction on the electrical conductivity of CNT–polymer nanocomposites and useful guidelines for the design and optimization of conductive polymer nanocomposites.