硝酸浓度对橄榄石基活性炭特性的影响(英文)

In this work we investigated the effect of nitric acid concentration on the pore structure, surface chemistry and liquid phase adsorption of olive stone based activated carbon prepared by mixing process using phosphoric acid and steam as activating agents. Chemicals and textural characterization show that the increase of HNO3 concentration increases considerably the total acidic groups but decreases specific surface area and pore volume. The study of adsorption in aqueous solutions of two organics, phenol and methylene blue, on raw and oxidized activated carbon indicates that the treatment of mixed activated carbon with different concentrations of nitric acid improves the adsorbent capacity for methylene blue at HNO3 concentrations less or equal to 2 mol·L 1, while it has a negative effect on phenol adsorption.     

二苯并呋喃在活性炭上的吸附相平衡和动力学

The adsorption of dibenzofuran on three commercial granular activated carbons （ACs） was investigated by dynamic experiment to correlate the adsorption equilibrium and kinetics with the structure of activated carbons. Physical properties including surface area, average pore diameter, micropore area and micropore volume of the activated carbons were characterized by N2 adsorption experiment on ASAP2010. To calculate the adsorption parameters, adsorption isotherm data were fitted to the Langmuir equation, and adsorption kinetic data were fitted to the linear driving force （LDF） diffusion model. From the correlation results, it is concluded that the adsorption equilibrium and diffusion coefficient of dibenzofuran on activated carbon are controlled respectively by the total adsorbent surface area and the adsorbent pore diameter.     

Modified activated carbons with amino groups and their copper adsorption properties in aqueous solution

Activated carbons were prepared by two chemical methods and the adsorption of Cu (II) on activated carbons from aqueous solution containing amino groups was studied. The first method involved the chlorination of activated carbon following by substitution of chloride groups with amino groups, and the second involved the nitrilation of activated carbon with reduction of nitro groups to amino groups. Resultant activated carbons were characterized in terms of porous structure, elemental analysis, FTIR spectroscopy, XPS, Boehm titration, and pHzpc. Kinetic and equilibrium tests were performed for copper adsorption in the batch mode. Also, adsorption mechanism and effect of pH on the adsorption of Cu (II) ions were discussed. Adsorption study shows enhanced adsorption for copper on the modified activated carbons, mainly by the presence of amino groups, and the Freundlich model is applicable for the activated carbons. It is suggested that binding of nitrogen atoms with Cu (II) ions is stronger than that with H+ions due to relatively higher divalent charge or stronger electrostatic force.     

Hierarchical pore structure of activated carbon fabricated by CO2/microwave for volatile organic compounds adsorption

An activated carbon pore-expanding technique was achieved through innovative reactivation by CO_2/microwave.The original and modified activated carbons were characterized by nitrogen adsorption–desorption,scanning electron microscopy,transmission electron microcopy,and Fourier transform infrared spectroscopy.The mesopore volume increased from 0.122 cm~3·g~(-1) to 0.270 cm~3·g~(-1),and a hierarchical pore structure was formed.A gradual decrease in the phenolic hydroxyl and carboxyl groups on the surface of activated carbon enhanced the surface inertia of granular activated carbon(GAC).The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC.Adsorption isotherm fittings revealed that the Langmuir model was applicable for the original and modified activated carbons.The isosteric adsorption heat of toluene on the activated carbon decreased by approximately 50%,which endowed the modified sample with excellent stability in application.The modified samples showed an enhanced desorption performance of toluene,thereby opening a way to extend the cycle life and improve the economic performance of carbon adsorbent in practical engineering applications.     

竹制活性炭处理酸性染料废水吸附等温线模型的误差分析(英文)

High surface area activated carbons were produced by thermal activation of waste bamboo scaffolding with phosphoric acid.Single component equilibrium dye adsorption was conducted on the carbons produced and compared with a commercially available carbon.Two acid dyes with different molecular sizes,namely Acid Yellow 117(AY117) and Acid Blue 25(AB25),were used to evaluate the adsorption capacity of the produced carbons.It was found that the dye with smaller molecular size,AB 25,was readily adsorbed onto the produced carbon,nearly three times higher than a commercially available carbon,while the larger size dye,AY117,showed little adsorption.The experimental data were analyzed using isotherm equations including Langmuir,Freundlich,Tempkin,Toth,Redlich-Peterson and Sips equations.The equilibrium data were then analyzed using five different non-linear error analysis methods.     

Peanut Shell Activated Carbon： Characterization,Surface Modification and Adsorption of Pb^2＋ from Aqueous Solution

Metal ion contamination of drinking water and waste water, especially with heavy metal ion such as lead, is a serious and ongoing problem. In this work, activated carbon prepared from peanut shell （PAC） was used for the removal of Pb^2＋ from aqueous solution. The impacts of the Pb25 adsorption capacities of the acid-modified carbons oxidized with HNO3 were also investigated. The surface functional groups of PAC were confirmed by Fourier transform infrared （FTIR） spectroscopy, X-ray photoelectron spectroscopy （XPS）, Boehm titration. The textural properties （surface area, total pore volume） were evaluated from the nitrogen adsorption isotherm at 77 K. The experimental results presented indicated that the adsorption data fitted better with the Langmuir adsorption model. A comparative study with a commercial granular activated carbon （GAC） showed that PAC was 10.3 times more efficient compared to GAC based on Langmuir maximum adsorption capacity. Further analysis results by the Langmuir equation showed that HNO3 [20% （by mass）] modified PAC has larger adsorption capacity of Pb^2＋ from aqueous solution （as much as 35.5 mg·g^-1）. The adsorption capacity enhancement ascribed to pore widening, increased cation-exchange capacity by oxygen groups, and the promoted hydrophilicity of the carbon surface.     

相对湿度对甲醛在改性活性炭上吸附的影响

This work mainly involves the study of effect of relative humidity on adsorption of formaldehyde on the activated carbons modified with organosilane solution. Modification of activated carbons was carded out by impregnating activated carbon with organosilane/methanol-containing solutions. The breakthrough curves of formaldehyde in the packed beds of original and modified activated carbons were measured, respectively, at relative humidity of 30%, 60%, and 80%. Temperature-programmed desorption （TPD） experiments were used to estimate the activation energy for desorption of formaldehyde from the activated carbon. Results showed that the relative humidity had strongly influence on breakthrough curves of formaldehyde in the packed beds. The higher the relative humidity of gas mixtures through the packed beds was, the smaller the breakthrough time of formaldehyde became. The use of organosilane compounds to modify surfaces of the activated carbon can enhance the interaction between formaldehyde and the surfaces, and as a result, the breakthrough times of formaldehyde in the packed beds of the modified activated carbon were longer than that in the packed bed of the unmodified activated carbon.     

生物质对低浓度染料废物的协同多层吸收(英文)

Due to the high cost of adsorbents and their thermal regeneration in recent years,much research has focused on the search for cheaper adsorbents for treating wastewater from textile industry.The single component adsorption of an acidic dye,Acid Yellow 117,and a basic dye,Methylene Blue,onto several adsorbents—bamboo,waste wood,bamboo char,waste wood char,bamboo activated carbon,wood activated carbon and active carbon F400 were conducted.Based on a Langmuir analysis,the monolayer adsorption capacities were determined.Three of the adsorbents were selected for binary layer adsorption to check the multilayer concept and the potential application for better adsorbent usage.The two cheapest adsorbents,bamboo and wood are compared with the commercial activated carbon F400,and all three systems were successful.     

苯-水混合蒸气在活性炭上的二元吸附平衡

Adsorption equilibrium isotherms of benzene in the concentration range of 500-4000 mg·@m-3 on two commercial activated carbons were obtained using long-column method under 30℃ and different humidity conditions. Results show that the benzene and water vapors have depression effects upon the adsorption of each other and that the unfavorable effect of water vapor resembles its single-component isotherm on activated carbon. A competitive adsorption model was proposed to explore the depression mechanisms of the non-ideal, non-similar binary adsorption systems. A modified Polanyi-Dubinin equation was set up to correlate the binary adsorption equilibrium and to calculate the isotherms of benzene on activated carbon in presence of water vapor with considerable precision.     

二苯并呋喃在活性炭床层中的吸附动力学

The adsorption of dibenzofuran （DBF） on three commercial granular activated carbons （GAC） was investigated to correlate the adsorption equilibrium and kinetics with the morphological characteristics of activated carbons. Breakthrough experiment was conducted to determine the isotherm and kinetics of dibenzofuran on the activated carbons. All-the experiment runs were performed in a fixed bed with a process temperature of 368 K. The effects of adsorbent morphological properties on the kinetics of the adsorption process were studied. The equilibrium data are found satisfactory fitted to the Langmuir isotherm. An intraparticle diffusion model based on the obtained Langmuir isotherm was＇developed for predicting the fixed bed adsorption of dibenzofuran. The result indicated that this model fit all the breakthrough curves well. The surface diffusion coefficients of dibenzofuran on the activated carbon are calculated, and a relationship with the microporosity is found. As it was expected, the dibenzofuran molecule finds more kinetic restrictions for the diffusion in those carbons with narrower pore diameter.     

Synthetic carbons activated with phosphoric acid: I. Surface chemistry and ion binding properties

Synthetic activated carbons were prepared by phosphoric acid activation of a styrene-divinylbenzene copolymer at various temperatures in the 400-1000 °C range. The resulting carbons were characterized by elemental analysis, cation-exchange capacity measurement, infrared spectroscopy, potentiometric titration with calculation of proton affinity spectra, and copper adsorption from solution. The results indicate that the synthetic carbons obtained possess acidic character and show cation-exchange properties similar to those of oxidized carbons. However, the acidic compounds arising from treatment with phosphoric acid are tightly bound to the carbon lattice and are chemically and thermally more stable than those introduced by oxidative treatments. The largest amount of cation-exchange surface groups is introduced after activation at 800 °C. Infrared investigations showed that phosphorus compounds may be polyphosphates bound to the carbon lattice. Proton affinity distribution curves calculated from potentiometric titration experiments showed four types of surface groups on synthetic phosphoric acid activated carbons. Among them phosphorus-containing groups are the most important for the adsorption of heavy metal ions (copper) from acid solutions. Thus, carbons activated with phosphoric acid may be regarded as prospective cation-exchangers for the removal of heavy metals from water solutions.     

油茶壳残渣制备活性炭的工艺

以油茶壳醇浸取后残渣为原料,以磷酸活化法制备活性炭,考察了浸渍比、磷酸质量分数和活化温度等对活性炭吸附性能及其得率的影响;活性炭的吸附性能由碘吸附值、亚甲基蓝吸附值表征。结果表明,在酸/炭浸渍比为3:1、磷酸质量分数70%、活化温度500℃时,活性炭的吸附性能最佳,其碘、亚甲基蓝吸附值和得率分别为1043.29mg/g、148.5mg/g和38.77%。采用物理吸附仪在77K下测定其N₂吸附脱附等温线,利用BET法和BJH法计算比表面积和孔径分布,其比表面积为1626.45m²/g,平均孔径为4.7nm,总孔容为1.94cm³/g。同时采用FTIR和XRD分析了活性炭的表面官能团和微观结构。     

Acid properties of phosphoric acid activated carbons and their catalytic behavior in ethyl-tert-butyl ether synthesis

Carbon catalysts were prepared by phosphoric acid activation of styrene-divinylbenzene copolymer followed by liquid phase oxidation with nitric acid. Their surface properties were modified by heat treatment at 300-600 °C in an argon atmosphere, and their acid properties were characterized by quasi-equilibrium temperature desorption of ammonia and by acid-base titration. The pore structure was characterized by nitrogen adsorption at −196 °C. Their catalytic activity in the synthesis of ethyl-tert-butyl ether (ETBE) from isobutene and ethanol was investigated. It has been shown that the carbon catalysts are active and selective in ETBE synthesis. The main factor determining the catalytic activity of carbon catalysts is the total number of acid surface sites. A linear correlation between total amount of surface sites and catalytic activity was found.     

磷酸活化烟草杆制备中孔活性炭的研究

以烟草杆为原料,以磷酸为活化剂,采用一步炭化法制备了活性炭。采用正交实验研究了磷酸质量分数、浸渍时间、炭化温度及保温时间对活性炭得率和吸附性能的影响,在最佳工艺条件(磷酸质量分数30%,浸渍时间48 h,炭化温度750℃,保温时间20 min)下,所制备的活性炭其碘吸附值为889.36 mg/g,亚甲基蓝吸附值为21.5 mL/(0.1 g),得率为36.90%。同时测定了该活性炭的液氮吸附等温线,并通过BET、H K方程、D A方程和密度函数理论(DFT)表征了活性炭的孔结构。结果表明,该活性炭为中孔型,BET比表面积为892 m2/g,总孔体积为0.467 8 mL/g,微孔占总孔体积的37.06%,中孔占62.85%,大孔占0.07%。最后采用电子探针和透射电镜分析了活性炭的微观结构,其结构与氮吸附测定的结果较为一致。     

Synthetic carbons activated with phosphoric acid III. Carbons prepared in air

Synthetic activated carbons were prepared by phosphoric acid activation of a styrene-divinylbenzene copolymer in an air atmosphere at various temperatures in the 400-900 °C interval. The carbons were characterized by elemental analysis, cation-exchange capacity measurement, infrared spectroscopy, potentiometric titration, copper adsorption from solution and physical adsorption of N₂ at −196 °C and CO₂ at 0 °C. It was shown that, similarly to synthetic phosphoric acid activated carbons obtained in argon, the synthetic carbons activated with phosphoric acid in air possess an acidic character and show considerable cation-exchange properties. The contribution of oxygen-containing surface groups along with phosphorus-containing groups to CEC is higher for carbons obtained in air. Three types of surface groups were identified on carbons prepared at temperatures up to 600 °C, and four types on carbons prepared at higher temperatures. These groups were assigned to ‘super-acidic’ (pK<0), phosphorus-containing (pK=1.1-1.2), carboxylic (pK=4.7-6.0) and phenolic (pK=8.1-9.4) groups. The cation-exchange capacity was at a maximum for the carbon prepared at 800 °C. Copper adsorption by synthetic phosphoric acid activated carbons obtained in air at temperatures lower than 800 °C is higher than for similar carbons obtained in argon. The increase is due to additional formation of oxygen-containing surface groups. Calculated copper binding constants revealed the importance of phosphorus-containing and carboxylic groups for adsorption of copper from aqueous solution. All carbons show a multimodal pore size distribution including simultaneously micropores and mesopores, but the porous texture is not a prime factor in determining the cation-exchange capacities of these carbons. Synthetic phosphoric acid activated carbons show a greater development of porosity when obtained in air as compared to carbons carbonized in argon.     

多胺改性壳聚糖在盐酸介质中的缓蚀作用研究

制备了一种由四乙烯五胺(TEPA)多胺改性壳聚糖衍生物(TEPA-Ch),采用动电位极化曲线法研究了TEPA-Ch在1molL-1HCl介质中对碳钢的缓蚀作用。结果表明,TEPA-Ch为混合型缓蚀剂,在酸性介质中自发地吸附在碳钢表面,其吸附方式遵循Langmuir吸附等温式。     

活性炭表面改性及其对Cr(Ⅵ)吸附性能的研究

分别用HNO3、H2SO4以及HNO3加乙酸铜溶液对活性炭进行了表面改性处理,测定了它们的表面化学性能,研究了改性活性炭对Cr(VI)吸附性能的影响。实验结果表明：通过上述改性,活性炭表面官能团数量发生了显著改变,特别是羧基增加较多;通过改性后的活性炭对Cr(Ⅵ)吸附性能有所提高。     

一步法制备富氧木质素活性炭及其亚甲基蓝吸附性能

以硫酸盐造纸黑液木质素为原料,分别采用磷酸活化和磷酸、硫酸混合酸活化制备了两类不同结构的木质素活性炭,对其进行了扫描电镜（SEM）、红外光谱（FTIR）、氮气吸附脱附、元素分析和Boehm酸值滴定等表征分析,并将制备的活性炭应用于模拟亚甲基蓝（MB）染料废水的吸附。结果表明,混合酸活化制备的木质素活性炭比单独磷酸活化的木质素活性炭的比表面积、总孔体积、介孔体积、氧含量分别增加了27.9%、26.4%、29.3%和29.2%,并且孔径分布更趋集中。混合酸活化活性炭在pH为2~9的范围内对亚甲基蓝均有优异的吸附性能,最大饱和吸附量达到1118.90 mg·g^-1,比磷酸活化木质素活性炭的吸附量增加了20.3%,表现出良好的吸附性能。吸附速率快,吸附过程遵循Langmuir等温线和伪二级动力学方程,颗粒内扩散不是唯一的决速步骤。     

Effects of the crystallinity of lignocellulosic material on the porosity of phosphoric acid-activated carbon

Activated carbons were prepared from three different lignocellulosic materials or in various lengths of impregnation time by phosphoric acid activation. The porous texture of activated carbon was analyzed in terms of the adsorption isotherm of nitrogen, and the crystallinity of lignocellulosic material was measured by X-ray diffraction method. The results showed that decreasing the crystallinity of lignocellulosic material promotes pore development, especially of mesopores. However, excessive impregnation is detrimental to activation. Impregnation and the selection of parent lignocellulosic material have a similar effect on developing porosity during phosphoric acid activation.