Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

Sub-2 nm Ultrathin and Robust 2D FeNi Layered Double Hydroxide Nanosheets Packed with 1D FeNi-MOFs for Enhanced Oxygen Evolution Electrocatalysis

Water oxidation is a critical process for electrochemical water splitting due to its inherent sluggish kinetics. In spite of the high catalytic activities of noble metal-based electrocatalysts for water oxidation, their high cost, rare reserves, and low stabilities drive researchers to exploit efficient but low-cost electrocatalysts. Ultrathin 2D nanomaterials are considered efficient electrocatalysts for oxygen evolution reaction (OER) in water splitting. Herein, a facile strategy is proposed to fabricate 2D FeNi layered double hydroxide (FeNi-LDH) nanosheets packed with the in situ produced 1D sword-like FeNi-MOFs by using FeNi-LDH as a semi-sacrificial template. In the composite, the thickness of the formed nanosheets is only 1.34 nm, much thinner than that of most previously reported 2D materials. The 1D porous sword-like MOF nanorods have a long length of around 1.3 µm. Due to the unique 2D/1D combined structure, the as-prepared FeNi LDH/MOF is directly used as electrocatalyst for the OER displays enhanced OER electrocatalytic performance with a low overpotential of 272 mV@100 mA cm^–2, a small Tafel slope of 34.1 mV dec^–1, high long-term durability. This work provides a new way to fabricate integrated ultrathin 2D nanosheets and MOFs as advanced catalysts for electrochemical energy conversion.     

Metal‐Organic Precursor–Derived Mesoporous Carbon Spheres with Homogeneously Distributed Molybdenum Carbide/Nitride Nanoparticles for Efficient Hydrogen Evolution in Alkaline Media

The generation of hydrogen through water electrolysis is considered as a sustainable approach for future fuel production. Molybdenum (Mo)‐based compounds are reported as highly active and inexpensive alternatives to platinum‐based electrocatalysts for the hydrogen evolution reaction (HER). Currently, the major challenge for Mo‐based HER electrocatalysts lies in establishing new concepts of micro‐/nanostructure design to enhance the hydrogen evolution kinetics and realizing facile, large‐scale, and green fabrication processes. Here, a fast, scalable, and eco‐friendly metal‐organic coordination precursor–assisted strategy is reported for synthesizing novel hierarchically mesoporous Mo‐based carbon electrocatalysts for efficient hydrogen production. Benefiting from homogeneously distributed Mo‐based nanocrystallites/heterojunctions and uniform mesopores, the Mo‐based mesoporous electrocatalyst shows high hydrogen evolution activity and stability with a low overpotential of 222 mV at 100 mA cm^?2 (Pt/C: 263 mV), ranging among the best non‐noble metal HER catalysts in alkaline condition. Overall, the discovery of using dopamine–molybdate coordination precursor with silica nanoparticles will not only create a new pathway for controllable synthesis of diverse kinds of micro‐/nanostructured Mo‐based catalysts, but also take a step toward the fast and scale‐up production of advanced mesoporous carbon electrodes for a broad range of applications.     

Non‐Noble‐Metal‐Based Electrocatalysts toward the Oxygen Evolution Reaction

The development of low‐cost, high‐efficiency, and robust electrocatalysts for the oxygen evolution reaction (OER) is urgently needed to address the energy crisis. In recent years, non‐noble‐metal‐based OER electrocatalysts have attracted tremendous research attention. Beginning with the introduction of some evaluation criteria for the OER, the current OER electrocatalysts are reviewed, with the classification of metals/alloys, oxides, hydroxides, chalcogenides, phosphides, phosphates/borates, and other compounds, along with their advantages and shortcomings. The current knowledge of the reaction mechanisms and practical applications of the OER is also summarized for developing more efficient OER electrocatalysts. Finally, the current states, challenges, and some perspectives for non‐noble‐metal‐based OER electrocatalysts are discussed.     

Overall Water Splitting Catalyzed Efficiently by an Ultrathin Nanosheet‐Built,Hollow Ni3S2‐Based Electrocatalyst

Making highly efficient catalysts for an overall ?water splitting reaction is vitally important to bring solar/electrical‐to‐hydrogen energy conversion processes into reality. Herein, the synthesis of ultrathin nanosheet‐based, hollow MoO_x/Ni₃S₂ composite microsphere catalysts on nickel foam, using ammonium molybdate as a precursor and the triblock copolymer pluronic P123 as a structure‐directing agent is reported. It is also shown that the resulting materials can serve as bifunctional, non‐noble metal electrocatalysts with high activity and stability for the hydrogen evolution reaction (HER) as well as the oxygen evolution reaction (OER). Thanks to their unique structural features, the materials give an impressive water‐splitting current density of 10 mA cm^?2 at ≈1.45 V with remarkable durability for >100 h when used as catalysts both at the cathode and the anode sides of an alkaline electrolyzer. This performance for an overall water splitting reaction is better than even those obtained with an electrolyzer consisting of noble metal‐based Pt/C and IrO_x/C catalytic couple—the benchmark catalysts for HER and OER, respectively.     

Fe3C‐Co Nanoparticles Encapsulated in a Hierarchical Structure of N‐Doped Carbon as a Multifunctional Electrocatalyst for ORR,OER, and HER

Rational design of non‐noble metal catalysts with robust and durable electrocatalytic activity for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) is extremely important for renewable energy conversion and storage, regenerative fuel cells, rechargeable metal–air batteries, water splitting etc. In this work, a unique hybrid material consisting of Fe₃C and Co nanoparticles encapsulated in a nanoporous hierarchical structure of N‐doped carbon (Fe₃C‐Co/NC) is fabricated for the first time via a facile template‐removal method. Such an ingenious structure shows great features: the marriage of 1D carbon nanotubes and 2D carbon nanosheets, abundant active sites resulting from various active species of Fe₃C, Co, and NC, mesoporous carbon structure, and intimate integration among Fe₃C, Co, and NC. As a multifunctional electrocatalyst, the Fe₃C‐Co/NC hybrid exhibits excellent performance for ORR, OER, and HER, outperforming most of reported triple functional electrocatalysts. This study provides a new perspective to construct multifunctional catalysts with well‐designed structure and superior performance for clean energy conversion technologies.     

Recent Advances in Non‐Noble Bifunctional Oxygen Electrocatalysts toward Large‐Scale Production

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial reactions in energy conversion and storage systems including fuel cells, metal–air batteries, and electrolyzers. Developing low‐cost, high‐efficiency, and durable non‐noble bifunctional oxygen electrocatalysts is the key to the commercialization of these devices. Here, based on an in‐depth understanding of ORR/OER reaction mechanisms, recent advances in the development of non‐noble electrocatalysts for ORR/OER are reviewed. In particular, rational design for enhancing the activity and stability and scalable synthesis toward the large‐scale production of bifunctional electrocatalysts are highlighted. Prospects and future challenges in the field of oxygen electrocatalysis are presented.     

Self‐Powered Water‐Splitting Devices by Core–Shell NiFe@N‐Graphite‐Based Zn–Air Batteries

Development of highly efficient and low‐cost multifunctional electrocatalysts for the oxygen evolution reaction (OER), the oxygen reduction reaction (ORR), and the hydrogen evolution reaction is urgently required for energy storage and conversion applications, such as in Zn–air batteries and water splitting to replace very expansive noble metal catalysts. Here, the new core–shell NiFe@N‐graphite electrocatalysts with excellent electrocatalytic activity and stability toward OER and ORR are reported and the Ni_0.5Fe_0.5@N‐graphite electrocatalyst is applied as the air electrode in Zn–air batteries. The respective liquid Zn–air battery shows a large open‐circuit potential of 1.482 V and a small charge–discharge voltage gap of 0.12 V at 10 mA cm⁻², together with excellent cycling stability even after 40 h at 20 mA cm⁻². Interestingly, the all‐solid‐like Zn–air battery thus derived shows a highly desired mechanical flexibility, whereby little change is observed in the voltage when bent into different angles. Using the same Ni_0.5Fe_0.5@N‐graphite electrode, a self‐driven water‐splitting device, which is powered by two Zn–air batteries in‐series, is constructed. The present study opens a new opportunity for the rational design of metal@N‐graphite‐based catalysts of core–shell structures for electrochemical catalysts and renewable energy applications.     

Semisacrificial Template Growth of Self‐Supporting MOF Nanocomposite Electrode for Efficient Electrocatalytic Water Oxidation

Herein, the authors report, for the first time, the semisacrificial template growth of a self‐supporting metal–organic framework (MOF) nanocomposite electrode composed of ultrasmall iron‐rich Fe(Ni)‐MOF cluster‐decorated ultrathin Ni‐rich Ni(Fe)‐MOF nanosheets from the NiFe alloy foam, in which the Fe(Ni)‐MOF clusters are uniform with a particle size of 2–5 nm, while the thickness of the Ni(Fe)‐MOF nanosheets is only about 1.56 nm. When directly used as a self‐supported working electrode for the oxygen evolution reaction (OER), it can afford an impressive electrocatalytic performance with required overpotentials of 227 and 253 mV to achieve current densities of 10 and 100 mA cm^?2, respectively, much outperforming the benchmark of RuO₂ and most state‐of‐the‐art noble‐metal‐free catalysts. Characterizations demonstrated that the combination of the unique nanostructure of the catalyst and the strong coupling effect between Ni and Fe active sites should be responsible for its excellent OER performance. Remarkably, when coupled with a Pt electrode in an overall water splitting system, they only needed 1.537 V to achieve a current density of 10 mA cm^?2. The facile and economical methodology represents a new way to design and prepare high‐performance self‐supporting MOF electrocatalysts for highly efficient electrochemical processes.     

Electro‐Oxidation of Ni42 Steel: A Highly Active Bifunctional Electrocatalyst

Janus type water‐splitting catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni42 steel is upon harsh anodization converted into a bifunctional electrocatalyst. Oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) and at pH 0, 1, 13, 14, 14.6 (HER), respectively. The current density taken from long‐term OER measurements in pH 7 buffer solution upon the electro‐activated steel at 491 mV overpotential (η) is around four times higher (4 mA cm^?2) in comparison with recently developed OER electrocatalysts. The very strong voltage–current behavior of the catalyst shown in OER polarization experiments at both pH 7 and at pH 13 are even superior to those known for IrO₂‐RuO₂. No degradation of the catalyst is detected even when conditions close to standard industrial operations are applied to the catalyst. A stable Ni‐, Fe‐oxide based passivating layer sufficiently protects the bare metal for further oxidation. Quantitative charge to oxygen (OER) and charge to hydrogen (HER) conversion are confirmed. High‐resolution XPS spectra show that most likely γ?NiO(OH) and FeO(OH) are the catalytic active OER and NiO is the catalytic active HER species.     

Sandwich‐Like Nanocomposite of CoNiOx/Reduced Graphene Oxide for Enhanced Electrocatalytic Water Oxidation

The development of cost‐effective and high‐performance electrocatalysts for oxygen evolution reaction (OER) is essential for sustainable energy storage and conversion processes. This study reports a novel and facile approach to the hierarchical‐structured sheet‐on‐sheet sandwich‐like nanocomposite of CoNiO _x /reduced graphene oxide as highly active electrocatalysts for water oxidation. Notably, the as‐prepared composite can operate smoothly both in 0.1 and 1.0 m KOH alkaline media, displaying extremely low overpotentials, fast kinetics, and strong durability over long‐term continuous electrolysis. Impressively, it is found that its catalytic activity can be further promoted by anodic conditioning owing to the in situ generation of electrocatalytic active species (i.e., metal hydroxide/(oxy)hydroxides) and the enriched oxygen deficiencies at the surface. The achieved ultrahigh performance is unmatched by most of the transition‐metal/nonmetal‐based catalysts reported so far, and even better than the state‐of‐the‐art noble‐metal catalysts, which can be attributed to its special well‐defined physicochemical textural features including hierarchical architecture, large surface area, porous thin nanosheets constructed from CoNiO _x nanoparticles (≈5 nm in size), and the incorporation of charge‐conducting graphene. This work provides a promising strategy to develop earth‐abundant advanced OER electrocatalysts to replace noble metals for a multitude of renewable energy technologies.     

A Cobalt‐Based Amorphous Bifunctional Electrocatalysts for Water‐Splitting Evolved from a Single‐Source Lazulite Cobalt Phosphate

Over the years, cobalt phosphates (amorphous or crystalline) have been projected as one of the most significant and promising classes of nonprecious catalysts and studied exclusively for the electrocatalytic and photocatalytic oxygen evolution reaction (OER). However, their successful utilization of hydrogen evolution reaction (HER) and the reaction of overall water‐splitting is rather unexplored. Herein, presented is a crystalline cobalt phosphate, Co₃(OH)₂(HPO₄)₂, structurally related to the mineral lazulite, as an efficient precatalyst for OER, HER, and water electrolysis in alkaline media. During both electrochemical OER and HER, the Co₃(OH)₂(HPO₄)₂ nanostructure was completely transformed in situ into porous amorphous CoO_x (OH) films that mediate efficient OER and HER with extremely low overpotentials of only 182 and 87 mV, respectively, at a current density of 10 mA cm^?2. When assemble as anode and cathode in a two‐electrode alkaline electrolyzer, unceasing durability over 10 days is achieved with a final cell voltage of 1.54 V, which is superior to the recently reported effective bifunctional electrocatalysts. The strategy to achieve more active sites for oxygen and hydrogen generation via in situ oxidation or reduction from a well‐defined inorganic material provides an opportunity to develop cost‐effective and efficient electrocatalysts for renewable energy technologies.     

Engineering an Earth‐Abundant Element‐Based Bifunctional Electrocatalyst for Highly Efficient and Durable Overall Water Splitting

The simultaneous and efficient evolution of hydrogen and oxygen with earth‐abundant, highly active, and robust bifunctional electrocatalysts is a significant concern in water splitting. Herein, non‐noble metal‐based Ni–Co–S bifunctional catalysts with tunable stoichiometry and morphology are realized. The engineering of electronic structure and subsequent morphological design synergistically contributes to significantly elevated electrocatalytic performance. Stable overpotentials (η₁₀) of 243 mV (vs reversible hydrogen electrode) for oxygen evolution reaction (OER) and 80 mV for hydrogen evolution reaction (HER), as well as Tafel slopes of 54.9 mV dec^?1 for OER and 58.5 mV dec^?1 for HER, are demonstrated. In addition, density functional theory calculations are performed to determine the optimal electronic structure via the electron density differences to verify the enhanced OER activity is related to the Co top site on the (110) surface. Moreover, the tandem bifunctional NiCo₂S₄ exhibit a required voltage of 1.58 V (J = 10 mA cm^?2) for simultaneous OER and HER, and no obvious performance decay is observed after 72 h. When integrated with a GaAs solar cell, the resulting photoassisted water splitting electrolyzer shows a certified solar‐to‐hydrogen efficiency of up to 18.01%, further demonstrating the feasibility of engineering protocols and the promising potential of bifunctional NiCo₂S₄ for large‐scale overall water splitting.     

Recent Progress in MOF‐Derived,Heteroatom‐Doped Porous Carbons as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction in Fuel Cells

Currently, developing nonprecious‐metal catalysts to replace Pt‐based electrocatalysts in fuel cells has become a hot topic because the oxygen reduction reaction (ORR) in fuel cells often requires platinum, a precious metal, as a catalyst, which is one of the major hurdles for commercialization of the fuel cells. Recently, the newly emerging metal‐organic frameworks (MOFs) have been widely used as self‐sacrificed precursors/templates to fabricate heteroatom‐doped porous carbons. Here, the recent progress of MOF‐derived, heteroatom‐doped porous carbon catalysts for ORR in fuel cells is systematically reviewed, and the synthesis strategies for using different MOF precursors to prepare heteroatom‐doped porous carbon catalysts, including the direct carbonization of MOFs, MOF and heteroatom source mixture carbonization, and MOF‐based composite carbonization are summarized. The emphasis is placed on the precursor design of MOF‐derived metal‐free catalysts and transition‐metal‐doped carbon catalysts because the MOF precursors often determine the microstructures of the derived porous carbon catalysts. The discussion provides a useful strategy for in situ synthesis of heteroatom‐doped carbon ORR electrocatalysts by rationally designing MOF precursors. Due to the versatility of MOF structures, MOF‐derived porous carbons not only provide chances to develop highly efficient ORR electrocatalysts, but also broaden the family of nanoporous carbons for applications in supercapacitors and batteries.     

Novel Iron/Cobalt‐Containing Polypyrrole Hydrogel‐Derived Trifunctional Electrocatalyst for Self‐Powered Overall Water Splitting

Development of efficient, low‐cost, and durable electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) is of significant importance for many electrochemical devices, such as rechargeable metal–air batteries, fuel cells, and water electrolyzers. Here, a novel approach for the synthesis of a trifunctional electrocatalyst derived from iron/cobalt‐containing polypyrrole (PPy) hydrogel is reported. This strategy relies on the formation of a supramolecularly cross‐linked PPy hydrogel that allows for efficient and homogeneous incorporation of highly active Fe/Co–N–C species. Meanwhile, Co nanoparticles are also formed and embedded into the carbon scaffold during the pyrolysis process, further promoting electrochemical activities. The resultant electrocatalyst exhibits prominent catalytic activities for ORR, OER, and HER, surpassing previously reported trifunctional electrocatalysts. Finally, it is demonstrated that the as‐obtained trifunctional electrocatalyst can be used for electrocatalytic overall water splitting in a self‐powered manner under ambient conditions. This work offers new prospects in developing highly active, nonprecious‐metal‐based electrocatalysts in electrochemical energy devices.     

Phosphorus‐Doped Perovskite Oxide as Highly Efficient Water Oxidation Electrocatalyst in Alkaline Solution

Developing cost‐effective and efficient electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the storage of renewable energies. Perovskite oxides serve as attractive candidates given their structural and compositional flexibility in addition to high intrinsic catalytic activity. In a departure from the conventional doping approach utilizing metal elements only, here it is shown that non‐metal element doping provides an another attractive avenue to optimize the structure stability and OER performance of perovskite oxides. This is exemplified by a novel tetragonal perovskite developed in this work, i.e., SrCo_0.95P_0.05O_{3– δ} (SCP) which features higher electrical conductivity and larger amount of O₂ ^2?/O^? species relative to the non‐doped parent SrCoO_{3– δ} (SC), and thus shows improved OER activity. Also, the performance of SCP compares favorably to that of well‐developed perovskite oxides reported. More importantly, an unusual activation process with enhanced activity during accelerated durability test (ADT) is observed for SCP, whereas SC delivers deactivation for the OER. Such an activation phenomenon for SCP may be primarily attributed to the in situ formation of active A‐site‐deficient structure on the surface and the increased electrochemical surface area during ADT. The concept presented here bolsters the prospect to develop a viable alternative to precious metal‐based catalysts.     

Atomically Thin Defect‐Rich Fe–Mn–O Hybrid Nanosheets as High Efficient Electrocatalyst for Water Oxidation

Engineering non‐noble metal–based electrocatalysts with superior water oxidation performance is highly desirable for the production of renewable chemical fuels. Here, an atomically thin low‐crystallinity Fe–Mn–O hybrid nanosheet grown on carbon cloth (Fe–Mn–O NS/CC) is successfully synthetized as an efficient oxygen evolution reaction (OER) catalyst. The synthesis strategy involves a facile reflux reaction and subsequent low‐temperature calcination process, and the morphology and composition of hybrid nanosheets can be tailored conveniently. The defect‐rich Fe–Mn–O ultrathin nanosheet with uniform element distribution enables exposure of more catalytic active sites; moreover, the atomic‐scale synergistic action of Mn and Fe oxide contributes to an enhanced intrinsic catalytic activity. Therefore, the optimized Fe–Mn–O hybrid nanosheets, with lateral sizes of about 100–600 nm and ≈1.4 nm in thickness, enable a low onset potential of 1.46 V, low overpotential of 273 mV for current density of 10 mA cm^?2, a small Tafel slope of 63.9 mV dec^?1, and superior durability, which are superior to that of individual MnO₂ and FeOOH electrode, and even outperforming most reported MnO₂‐based electrocatalysts.     

Physically Adsorbed Metal Ions in Porous Supports as Electrocatalysts for Oxygen Evolution Reaction

Developing highly efficient and earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is significantly important for water‐splitting. Here, for the first time it is reported that the physically adsorbed metal ions (PAMI) in porous materials can be served as highly efficient OER electrocatalysts, which provides a universal PAMI method to develop electrocatalysts. This PAMI method can be applied to almost all porous supports, including graphene, carbon nanotubes, C₃N₄, CaCO₃, and porous organic polymers and all the systems exhibit excellent OER performance. In particular, the as‐synthesized Co_0.7Fe_0.3CB exhibits a small overpotential of 295 mV and 350 mV at the current density of 10 mA cm^?2 and 100 mA cm^?2, respectively, which exceeds commercial 40 wt% IrO₂/CB and most reported non‐noble metal‐based OER catalysts. Moreover, the mass activity of Co_0.7Fe_0.3CB reaches 643.4 A g^?1 at the overpotential of 320 mV, which is nearly 4.7 times higher than that of 40 wt% IrO₂/CB. In addition, the advanced ex situ and in situ synchrotron X‐ray characterizations are carried out to unravel the PAMI synthetic process. In short, this PAMI method will break the conversional understanding, i.e., the most OER catalysts are synthesized chemically, because the new PAMI method does not require any chemical synthesis, which therefore opens a new avenue for the development of OER electrocatalysts.     

Mechanistic Insights on Ternary Ni2−xCoxP for Hydrogen Evolution and Their Hybrids with Graphene as Highly Efficient and Robust Catalysts for Overall Water Splitting

Searching the high‐efficient, stable, and earth‐abundant electrocatalysts to replace the precious noble metals holds the promise for practical utilizations of hydrogen and oxygen evolution reactions (HER and OER). Here, a series of highly active and robust Co‐doped nickel phosphides (Ni_2?xCo_xP) catalysts and their hybrids with reduced graphene oxide (rGO) are developed as bifunctional catalysts for both HER and OER. The Co‐doping in Ni₂P and their hybridization with rGO effectively regulate the catalytic activity of the surface active sites, accelerate the charge transfer, and boost their superior catalytic activity. Density functional theory calculations show that the Co‐doped catalysts deliver the moderate trapping of atomic hydrogen and facile desorption of the generated H₂ due to the H‐poisoned surface active sites of Ni_2?xCo_xP under the real catalytic process. Electrochemical measurements reveal the high HER efficiency and durability of the NiCoP/rGO hybrids in electrolytes with pH 0–14. Coupled with the remarkable and robust OER activity of the NiCoP/rGO hybrids, the practical utilization of the NiCoP/rGO‖NiCoP/rGO for overall water splitting yields a catalytic current density of 10 mA cm^?2 at 1.59 V over 75 h without an obvious degradation and Faradic efficiency of ≈100% in a two‐electrode configuration and 1.0 m KOH.     

Multifunctional Mo–N/C@MoS2 Electrocatalysts for HER,OER, ORR,and Zn–Air Batteries

Replacement of noble‐metal platinum catalysts with cheaper, operationally stable, and highly efficient electrocatalysts holds huge potential for large‐scale implementation of clean energy devices. Metal–organic frameworks (MOFs) and metal dichalcogenides (MDs) offer rich platforms for design of highly active electrocatalysts owing to their flexibility, ultrahigh surface area, hierarchical pore structures, and high catalytic activity. Herein, an advanced electrocatalyst based on a vertically aligned MoS₂ nanosheet encapsulated Mo–N/C framework with interfacial Mo–N coupling centers is reported. The hybrid structure exhibits robust multifunctional electrocatalytic activity and stability toward the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. Interestingly, it further displays high‐performance of Zn–air batteries as a cathode electrocatalyst with a high power density of ≈196.4 mW cm^?2 and a voltaic efficiency of ≈63 % at 5 mA cm^?2, as well as excellent cycling stability even after 48 h at 25 mA cm^?2. Such outstanding electrocatalytic properties stem from the synergistic effect of the distinct chemical composition, the unique three‐phase active sites, and the hierarchical pore framework for fast mass transport. This work is expected to inspire the design of advanced and performance‐oriented MOF/MD hybrid‐based electrocatalysts for wider application in electrochemical energy devices.