Enhanced performance based on cross-layer design from physical to transport layers for multihop wireless networks

This paper puts forward a novel cognitive cross-layer design algorithms for multihop wireless networks optimization across physical,mediam access control(MAC),network and transport layers.As is well known,the conventional layered-protocol architecture can not provide optimal performance for wireless networks,and cross-layer design is becoming increasingly important for improving the performance of wireless networks.In this study,we formulate a specific network utility maximization(NUM)problem that we believe is appropriate for multihop wireless networks.By using the dual algorithm,the NUM problem has been optimal decomposed and solved with a novel distributed cross-layer design algorithm from physical to transport layers.Our solution enjoys the benefits of cross-layer optimization while maintaining the simplicity and modularity of the traditional layered architecture.The proposed cross-layer design can guarantee the end-to-end goals of data flows while fully utilizing network resources.Computer simulations have evaluated an enhanced performance of the proposed algorithm at both average source rate and network throughput.Meanwhile,the proposed algorithm has low implementation complexity for practical reality.     

认知无线Mesh网络跨层设计研究

传统网络的分层设计不能满足具有特殊QoS需求的无线宽带业务,无法应对动态频谱接入的无线通信环境。采用联合开放、架构灵活的跨层设计研究无线Mesh网络接入技术日渐成为热点。本文首先介绍了跨层设计的起源、分类,然后分析了认知无线Mesh网络跨层研究的挑战、难点及最新进展,并提出利用跨层设计实现路由及频谱管理的一种构想,最后展望了认知无线Mesh网络跨层研究的新方向。     

Cross-layer wireless resource allocation

A fundamental problem in networking is the allocation of limited resources among the users of the network. In a traditional layered network architecture, the resource to be allocated at the medium access control (MAC) and network layers utilizes communication links, viewed as "bit pipes" that deliver data at a fixed rate with occasional random errors. Though this separation has many advantages, there is a growing awareness that this simple bit-pipe view is inadequate, particularly in the context of modern wireless data networks. In this article, several basic cross-layer resource allocation problems for wireless fading channels are considered. The article focuses on the characterization of fundamental performance limits while taking into account both network layer QoS and physical layer performance.     

Cross-layer resource allocation over wireless relay networks for quality of service provisioning

The authors propose a physical-datalink cross-layer resource allocation scheme over wireless relay networks for quality-of-service (QoS) guarantees. By integrating information theory with the concept of effective capacity, the proposed scheme aims at maximizing the relay network throughput subject to a given delay QoS constraint. This delay constraint is characterized by the so-called QoS exponent thetas, which is the only requested information exchanged between the physical layer and the datalink layer in our cross-layer design based scheme. Over both amplify-and-forwards (AF) and decode-and-forward (DF) relay networks; the authors develop the associated dynamic resource allocation algorithms for wireless multimedia communications. Over DF relay network, the authors also study a fixed power allocation scheme to provide QoS guarantees. The simulations and numerical results verify that our proposed cross-layer resource allocation can efficiently support diverse QoS requirements over wireless relay networks. Both AF and DF relays show significant superiorities over direct transmissions when the delay QoS constraints are stringent. On the other hand, the results demonstrate the importance of deploying the dynamic resource allocation for stringent delay QoS guarantees.     

A New Systematic Framework for Autonomous Cross-Layer Optimization

Cross-layer optimization solutions have been proposed in recent years to improve the performance of wireless users that operate in a time-varying, error-prone network environment. However, these solutions often rely on centralized cross-layer optimization solutions that violate the layered network architecture of the protocol stack by requiring layers to provide access to their internal protocol parameters to other layers. This paper presents a new systematic framework for cross-layer optimization, which allows each layer to make autonomous decisions to maximize the wireless user's utility by optimally determining what information should be exchanged among layers. Hence, this cross-layer framework preserves the current layered network architecture. Since the user interacts with the wireless environment at various layers of the protocol stack, the cross-layer optimization problem is solved in a layered fashion such that each layer adapts its own protocol parameters and exchanges information (messages) with other layers that cooperatively maximize the performance of the wireless user. Based on the proposed layered framework, we also design a message-exchange mechanism that determines the optimal cross-layer transmission strategies, given the user's experienced environment dynamics.     

A cross-Layer quality-of-service mapping architecture for video delivery in wireless networks

Providing quality-of-service (QoS) to video delivery in wireless networks has attracted intensive research over the years. A fundamental problem in this area is how to map QoS criterion at different layers and optimize QoS across the layers. In this paper, we investigate this problem and present a cross-layer mapping architecture for video transmission in wireless networks. There are several important building blocks in this architecture, among others, QoS interaction between video coding and transmission modules, QoS mapping mechanism, video quality adaptation, and source rate constraint derivation. We describe the design and algorithms for each building block, which either builds upon or extend the state-of-the-art algorithms that were developed without much considerations of other layers. Finally, we use simulation results to demonstrate the performance of the proposed architecture for progressive fine granularity scalability video transmission over time-varying and nonstationary wireless channel.     

Cross-Layer Design for QoS in Wireless Mesh Networks

Cross-layer design for quality of service (QoS) in wireless mesh networks (WMNs) has attracted much research interest recently. Such networks are expected to support various types of applications with different and multiple QoS and grade-of-service (GoS) requirements. In order to achieve this, several key technologies spanning all layers, from physical up to network layer, have to be exploited and novel algorithms for harmonic and efficient layer interaction must be designed. Unfortunately most of the existing works on cross-layer design focus on the interaction of up to two layers while the GoS concept in WMNs has been overlooked. In this paper, we propose a unified framework that exploits the physical channel properties and multi-user diversity gain of WMNs and by performing intelligent route selection and connection admission control provides both QoS and GoS to a variety of underlying applications. Extensive simulation results show that our proposed framework can successfully satisfy multiple QoS requirements while it achieves higher network throughput and lower outage as compared to other scheduling, routing and admission control schemes.     

Cross-Layer Optimized Conditions for QoS Support in Multi-Hop Wireless Networks with MIMO Links

Recent advances in antenna technology made it possible to build wireless devices with more than one antenna at affordable costs. Because multiple antennas offer wireless networks a potential capacity increase, they are expected to be a key part of next-generation wireless networks to support the rapidly emerging multimedia applications characterized by their high and diverse QoS requirements. This paper developed methods that exploit the benefits of multiple antennas to enable multi-hop wireless networks with flow-level QoS capabilities. The authors first propose a cross-layer table-driven statistical approach that allows each node to determine the amount of spatial reuse and/or multiplexing, offered by the multiple antennas that are available to it. The authors then use the developed statistical approach to derive sufficient conditions under which flow rates are guaranteed to be feasible. The derived conditions are multi-layer aware in the sense that they account for cross-layer effects between the PHY and the MAC layers to support QoS at higher layers. The authors evaluate and compare the derived sufficient conditions via extensive simulations. The authors show that the conditions result in high flow acceptance rates when used in multi-hop wireless networking problems such as QoS routing and multicommodity flow problems. The authors also demonstrate the importance and the effect of considering cross-layer couplings into the development of flow acceptance methods.     

A survey of cross-layer design for VANETs

Recently, vehicular communication systems have attracted much attention, fueled largely by the growing interest in Intelligent Transportation Systems (ITS). These systems are aimed at addressing critical issues like passenger safety and traffic congestion, by integrating information and communication technologies into transportation infrastructure and vehicles. They are built on top of self organizing networks, known as a Vehicular Ad hoc Networks (VANET), composed of mobile vehicles connected by wireless links. While the solutions based on the traditional layered communication system architectures such as OSI model are readily applicable, they often fail to address the fundamental problems in ad hoc networks, such as dynamic changes in the network topology. Furthermore, many ITS applications impose stringent QoS requirements, which are not met by existing ad hoc networking solutions. The paradigm of cross-layer design has been introduced as an alternative to pure layered design to develop communication protocols. Cross-layer design allows information to be exchanged and shared across layer boundaries in order to enable efficient and robust protocols. There has been several research efforts that validated the importance of cross-layer design in vehicular networks. In this article, a survey of recent work on cross-layer communication solutions for VANETs is presented. Major approaches to cross-layer protocol design is introduced, followed by an overview of corresponding cross-layer protocols. Finally, open research problems in developing efficient cross-layer protocols for next generation transportation systems are discussed.     

End-to-end QoS provisioning in mobile heterogeneous networks

The remarkable advances in information technologies bring a heterogeneous environment for mobile users and service providers. This heterogeneity exists in wireless access technologies, networks, user terminals, applications, service providers, and so on. The ability to provide seamless and adaptive quality of service in such a heterogeneous environment is key to the success of next-generation wireless communications systems. There has been a considerable amount of QoS research recently. However, the main part of this research has been in the context of individual architectural components, and much less progress has been made in addressing the issue of an overall QoS architecture for the mobile Internet. This article first summarizes the state-of-the-art QoS techniques and standardization activities, then examines in detail important challenges in building a ubiquitous QoS framework over the heterogeneous environment, and finally proposes a QoS framework integrating a three-plane network infrastructure and a unified terminal cross-layer adaptation platform to provide seamless support for future applications.     

Cross-layer design for wireless networks

As the cellular and PCS world collides with wireless LANs and Internet-based packet data, new networking approaches will support the integration of voice and data on the composite infrastructure of cellular base stations and Ethernet-based wireless access points. This article highlights some of the past accomplishments and promising research avenues for an important topic in the creation of future wireless networks. We address the issue of cross-layer networking, where the physical and MAC layer knowledge of the wireless medium is shared with higher layers, in order to provide efficient methods of allocating network resources and applications over the Internet. In essence, future networks will need to provide "impedance matching" of the instantaneous radio channel conditions and capacity needs with the traffic and congestion conditions found over the packet-based world of the Internet. Furthermore, such matching will need to be coordinated with a wide range of particular applications and user expectations, making the topic of cross-layer networking increasingly important for the evolving wireless buildout.     

QoSMOS: cross-layer QoS architecture for wireless multimedia sensor networks

Wireless multimedia sensor networks (WMSNs), having inherent features and limited resources, require new quality of service (QoS) protocols for real-time and multimedia applications. In this paper, we present a cross-layer QoS architecture (QoSMOS), that unifies network and link layers into a single communication module for QoS provisioning. Based on QoSMOS architecture, we developed an example reference cross-layer protocol, named cross-layer communication protocol (XLCP), enabling scalable service differentiation in WMSNs. Comprehensive analysis of simulation results indicate that the proposed architecture successfully differentiates service classes in terms of soft delay, reliability and throughput domains. A comparative analysis of XLCP and its counterparts is also given to show the superiority of the cross-layer protocol.     

Cross-layer design for resource allocation in 3G wireless networks and beyond

Cross-layer design approaches are critical for efficient utilization of the scarce radio resources with QoS provisioning in the third-generation wireless networks and beyond. Better system performance can be obtained from information exchanges across protocol layers, which may not be available in the traditional layering architecture. This article provides an overview of cross-layer design approaches for resource allocation in 3G CDMA networks, summarizes state-of-the-art research results, and suggests further research issues. In addition, a cross-layer design approach for real-time video over time-varying CDMA channels is proposed, where link layer resource allocation benefits from information in both the application and physical layers. Simulations results are given to demonstrate the effectiveness of the proposed approach.     

Fast Handoff in SIP-Based Next Generation Mobile Networks

It is commonly held that next generation mobile systems will be developed on the Internet in combination with diverse access technologies, as the future network architecture will be the coming together of various overlapping wireless access networks. Integrating various wireless networks in future heterogeneous networking environments poses many difficulties, the most critical challenge of which is efficient support for seamless mobility. SIP is a promising nominee for managing mobility in heterogeneous networks as it provides mobility within the application layer and the characteristics of the lower layer protocols are invisible to it. However, the performance of SIP-based mobility management is downgraded, resulting from its adoption of TCP/UDP for signaling and its strict separation between the lower layers and the application layer of the protocol stack. In this paper, a SIP-based cross-layer design for fast handoffs is proposed to shorten the service interruption time when a mobile node crosses the overlapped area of a WLAN/3G cellular system. As will be shown by the simulation results, the SIP-based solution proposed in this paper effectively lessens the handoff delays caused by either the horizontal handoff or vertical handoff in future all-IP heterogeneous wireless networks.     

基于多业务QoS服务的拓扑控制算法研究

随着无线网络技术的不断发展,无线Ad hoc网络中,快速变化的网络拓扑影响着网络的性能。因此,在实现网络能量优化的前提下,如何提供有效的QoS服务来满足多业务要求是无线Ad hoc网络所必须面对的问题。针对此问题,提出了一种基于多业务需求的拓扑控制的方法,该方法考虑业务QoS指标的同时引入跨层的设计思想,实现了跨层的功率控制,减少了网络中节点的能量消耗,延长了网络的生命周期。     

Cross-layer optimization for SVC video delivery over the IEEE 802.11e wireless networks

The Scalable Video Coding (SVC) standard extends the H.264/AVC with scalability support and is effective to adapt bitrate to the time-varying wireless channel bandwidth. In this paper, we propose a cross-layer optimization scheme, which includes packet prioritization and QoS mapping, for the delivery of SVC over the IEEE 802.11e wireless networks. The proposed structure enables interaction among different network layers, providing differentiated services for video packets. Our cross-layer optimization performs with the following information: (i) SVC packet prioritization at the application layer, (ii) service differentiation at the MAC layer, and (iii) interface queue (IFQ) occupation status at the link layer. We formulate the QoS mapping problem as a joint optimization of access category (AC) assignment and IFQ control. A novel and efficient solution is proposed to reduce the computational complexity of the joint optimization problem. Simulation results show that the proposed approach achieves notable improvement when compared to conventional methods.     

The impact of imperfect scheduling on cross-Layer congestion control in wireless networks

In this paper, we study cross-layer design for congestion control in multihop wireless networks. In previous work, we have developed an optimal cross-layer congestion control scheme that jointly computes both the rate allocation and the stabilizing schedule that controls the resources at the underlying layers. However, the scheduling component in this optimal cross-layer congestion control scheme has to solve a complex global optimization problem at each time, and is hence too computationally expensive for online implementation. In this paper, we study how the performance of cross-layer congestion control will be impacted if the network can only use an imperfect (and potentially distributed) scheduling component that is easier to implement. We study both the case when the number of users in the system is fixed and the case with dynamic arrivals and departures of the users, and we establish performance bounds of cross-layer congestion control with imperfect scheduling. Compared with a layered approach that does not design congestion control and scheduling together, our cross-layer approach has provably better performance bounds,and substantially outperforms the layered approach. The insights drawn from our analyzes also enable us to design a fully distributed cross-layer congestion control and scheduling algorithm for a restrictive interference model.     

MIMO-OFDM系统的物理层技术及其PHY-MAC跨层设计

首先讨论了MIMO-OFDM无线通信系统的物理层技术原理，接着介绍了一种下行MIMO-OFDM系统中基于PHY-MAC跨层设计的保证不同类型（实时与非实时）用户服务质量（QoS）的动态资源分配（DRA）方案。该方案中系统能够根据不同的信道状态以及不同类型的QoS要求在PHY层和MAC层联合动态分配资源，相对传统的分层结构设计更为合理有效。     

Joint QoS control for video streaming over wireless multihop networks: A cross-layer approach

In this paper, we propose a novel cross-layer framework for jointly controlling and coding for multiple video streams in wireless multihop networks. At first, we develop a cross-layer flow control algorithm that works at the medium access control (MAC) layer to adjust each link's persistence probability and at the transport layer to adjust flow rates. This proposal is designed in a distributed manner that is amenable to online implementation for wireless networks, and then, a rate-distortion optimized joint source-channel coding (JSCC) approach for error-resilient scalable encoded video is presented, in which the video is encoded into multiple independent streams and each stream is assigned forward error correction (FEC) codes to avoid error propagation. Furthermore, we integrate the JSCC with the specific flow control algorithm, which optimally applies the appropriate channel coding rate given the constraints imposed by the transmission rate obtained from the proposed flow control algorithm and the prevailing channel condition. Simulation results demonstrate the merits and the need for joint quality of service (QoS) control in order to provide an efficient solution for video streaming over wireless multihop networks.     

Asymptotic loss of real-time traffic in wireless mobile networks with selective-repeat ARQ

We study the issue of quality of service (QoS) for real-time traffic over a wireless channel deploying automatic repeat request (ARQ) error control. An analytical model has been derived to evaluate the queueing related loss and the wireless channel related loss. In contrast to previous work, this model quantifies the interaction between the network layer and the physical layer, and then it enables the admission controllers of wireless networks to improve utilization while satisfying the traffic QoS constraints through cross-layer design techniques.