Air quality model evaluation data for organics. 6. C3-C24 organic acids

The atmospheric concentrations of 47 carboxylic acids in the semivolatile and particle phases are quantified in the Los Angeles area, as part of a larger study of the vapor-phase, semivolatile, and particle-phase organic compounds. Variations in the spatial and temporal distributions of acid concentrations are analyzed to determine whether atmospheric formation or primary emissions are responsible for the observed levels. Relatively low molecular weight aliphatic dicarboxylic acids (e.g., butanedioic acid, hexanedioic acid, and propanedioic acid) and some n-alkanoic acids (e.g., n-octanoic acid and n-nonanoic acid) are found at an offshore sampling location at levels comparable to urban area concentrations indicating that these compounds or their atmospheric precursors may be derived from long-range transport or natural background sources. Some aromatic carboxylic acids (e.g., benzoic acid and 1,2-benzenedicarboxylic acid) have spatial and temporal distributions suggesting that formation from anthropogenic emissions of gaseous precursors dominates their atmospheric concentrations. Additionally, the distributions of aliphatic carboxylic acid concentrations known to be emitted from primary sources (e.g., hexadecanoic acid and octadecanoic acid) are consistent with direct emissions as the dominant source of these compounds.     

Further studies on the latitudinal and temporal trends of persistent organic pollutants in Norwegian and U.K. background air

Data are presented for PBDEs, PCBs, and selected organochlorine compounds, measured at background locations by passive air samplers (semipermeable membrane devices, SPMDs) along a latitudinal transect from the south of the U.K. to the north of Norway during 2000-2002. This work is part of an ongoing air sampling campaign in which PCB data were previously obtained in 1994-1996 and 1998-2000. Comparisons of the masses of chemicals sequestered by the SPMDs during these different time intervals are used to investigate spatial and temporal trends. The study yielded examples of compounds that increase, decrease, or remain uniform with latitude, suggestive of differences in the relative importance of deposition versus atmospheric reaction in controlling their long-range atmospheric transport potential. The main constituents of the penta-BDE product were detected at amounts equivalent to 2.0 (range 1.1-2.5) and 1.1 (0.8-1.6) pg m(-3) for the U.K. and Norway background sites, respectively. Fractionation of PBDEs was observed, because the amounts of lighter BDEs decreased with latitude, while the heavier molecular weight congeners were quite uniformly distributed. In contrast, the sequestered amounts of the lighter PCBs were uniformly distributed with latitude, with heavier PCBs decreasing. Sequestered amounts of hexachlorobenzene increased with latitude. Preliminary PCB atmospheric clearance rates were derived using the 1994-1996, 1998-2000, and 2000-2002 data. They averaged ca. 3.5 years for all congeners/locations. No systematic differences in congeners or locations were noted, supporting the hypothesis that the underlying trends in European background air are still controlled by primary, rather than secondary, sources.     

雾霾背景下大气环境监测质量措施提升策略分析

在当前的时代发展中,环境保护工作开展得如火如荼,尤其对大气环境监测质量提出了更高的要求.本文对雾霾背景下的大气环境监测现状进行了分析,通过采取加强技术应用、完善现场采样、构建数据平台、提高专业程度、加大资金投入以及健全监测体系等措施,使各项监测技术的优势得到充分发挥.     

Sediment record and atmospheric deposition of brominated flame retardants and organochlorine compounds in Lake Thun, Switzerland: lessons from the past and evaluation of the present

Chronology of brominated fame retardants (BFRs), a class of currentlywidely used chemicals, was compared to the respective historical profiles of legacy organochlorine compounds in three dated sediment cores from a prealpine lake (Lake Thun, Switzerland). Concentrations of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) started to increase in the 1980s-1990s. In the more recent sediment layers, PBDEs still had steady or increasing concentrations, whereas for HBCDs one sediment core revealed a decreasing trend. In contrast to the contemporary BFRs, concentrations of legacy organochlorines, such as polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and dichlorodiphenyl trichloroethane (DDT), peaked in deeper sediment layers deposited some decades ago. Measurements of atmospheric deposition and evaluation of wastewater discharges pointtoward deposition on the lake surface as a relevant input pathway and wastewater as a minor source of POPs in Lake Thun. The effect of the environmental awareness and the regulations taken in the 1970s to reduce environmental pollution of organochlorines is well reflected in the analyzed sediment cores. The sediment burden closely follows estimated time trends of consumption and emission of PCBs and DDT. The current residues in sediment of BFRs are still lower than the historical peak levels of organochlorines. However, current atmospheric deposition of BFRs is similar to deposition of PCBs. Considering the high amount of BFRs presently stocked in the anthroposphere in flame proofed materials, further measures to reduce emissions during BFRs life cycle are recommended to prevent high environmental pollution as it occurred for the organochlorine compounds.     

Trends in secondary organic aerosol at a remote site in Michigan's upper peninsula

The trends in secondary organic aerosol at a remote location are studied using atmospheric fine particulate matter samples collected at Seney National Wildlife Refuge (NWR) in northern Michigan. Detailed analysis of particle-phase organic compounds revealed very low concentrations of primary anthropogenic emissions and relatively high levels of organic di-, tri-, and tetracarboxylic acids thought to be indicators of secondary organic aerosols. Seasonal changes in these organic compounds were tracked by analyzing composites of monthly average samples. The concentration of aromatic and aliphatic dicarboxylic acids peak in July and taper off in the fall, which coincides with fine particle organic carbon concentration. In contrast, a chemical mass balance model used to quantify primary sources of particulate matter shows higher contributions from primary emissions in the winter. Complementing the monthly average concentrations, event-based composites of high volume samples were used to track the different species of secondary organic aerosol at the Seney NWR location. The distribution of aliphatic diacids and the aromatic di- and triacids varied with different atmospheric conditions, which suggests different precursor gases for these secondary organic aerosol components. The aliphatic diacid concentrations track with ambient concentrations of particle-phase pinonic acid. In addition, back-trajectories for the eight event-based composites are compared to the organic acid distributions and are linked to the distribution of organic acids present in the composites.     

Increasing the Added-Value of Onions as a Source of Antioxidant Flavonoids: A Critical Review

Flavonoids are a large and diverse group of polyphenolic compounds with antioxidant effects. While the flavonoid content and composition profile clearly reflect the genetic background of the cultivar, environmental conditions and agronomic practices are also determinants for the composition of crops at harvest. Considerable research has been directed toward understanding the nature of polyphenols in different products and the factors influencing their accumulation. This review examines the flavonoids as a class of compounds, the role these compounds play in the plant, their contributions to product quality, and recent research on the impacts of environmental factors and cultural practices on flavonoid content in onions, highlighting how this knowledge may be used to modulate their polyphenolic composition at harvest or during post-harvest handling.     

Indicators for the exposure assessment of transformation products of organic micropollutants

Environmental transformation products of organic micropollutants have the potential to be similarly or even more mobile, persistent, ortoxic than their parent compounds. They should, therefore, be included in chemical hazard and risk assessment procedures as well as in the assessment of soil and water quality. To fulfill this requirement most efficiently, screening approaches that select relevant transformation products for detailed assessment are needed. This paper presents two process-based multimedia, multispecies models that allow us to quantitatively estimate the environmental fate of transformation products. The resulting exposure patterns are assessed with two indicators: joint persistence (JP), which describes the temporal extent of environmental exposure to a parent compound and its transformation products, and the predicted relative aquatic concentrations (RAC), which estimate the relative concentrations of parent compounds and their transformation products in surface water bodies. As a case study, JP and RAC are calculated for 16 pesticides and their relevant transformation products. The results for the JP indicator confirm the importance of considering transformation products in the assessment of overall persistence; for example, in the context of PBT assessments. Comparison of RAC results with monitoring data on herbicides and their transformation products shows the suitability of our approach for estimating relative concentrations in surface water, and as a consequence, its usefulness in identifying transformation products for future water quality monitoring programs. Transformation products of triketones and other highly used acidic herbicides are specifically identified as targets.     

Estimation of the production, consumption, and atmospheric emissions of pentabrominated diphenyl ether in Europe between 1970 and 2000

A European consumption and atmospheric emissions inventory for pentabrominated diphenyl ethers (PeBDEs) is derived for the period 1970-2000. This time frame has seen a rise in the widespread usage of PeBDE, followed by more recent restrictions/bans. It is estimated that a total of 3000-5000 t of PeBDEs was produced in Europe during this period, with a further 9000-10,000 t imported in finished articles. The main uses for PeBDE are to flame retard consumer products as well as in packaging and solid elastomers. Their major stocks are predicted to be in polyurethane (flexible) foams with up to 30% in cars; more than 10% in furniture foam; and the rest in textiles, building material, packaging, and solid applications. Release of PeBDEs from treated products into environmental media are estimated with a focus on atmospheric inputs via volatilization from their use in cars, upholstered furniture, textiles, television sets, personal computers, and other recycled material. Different emission factors are used to derive different emission scenarios. A peak in atmospheric emissions of between 22 and 31 t of BDE-47 is estimated to have occurred around 1997, with a decline of approximately 20% in 2000. Comparisons with long-term environmental monitoring data revealed that the time trends of human blood and milk concentrations follow similar patterns to the generated emissions, while sediment core levels increase more slowly, probably because they respond to a mix of atmospheric and catchment inputs. The emissions data derived here can be used in a spatially and temporally resolved form as input data for multi-media environmental fate modeling.     

Polybrominated diphenyl ethers in the environment and in people: a meta-analysis of concentrations

Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in many types of consumer products. Perhaps as a result of their widespread use and their lipophilicity, these compounds have become ubiquitous in the environment and in people. This review summarizes PBDE concentrations measured in several environmental media and analyzes these data in terms of relative concentrations, concentration trends, and congener profiles. In human blood, milk, and tissues, total PBDE levels have increased exponentially by a factor of approximately 100 during the last 30 yr; this is a doubling time of approximately 5 yr. The current PBDE concentrations in people from Europe are approximately 2 ng/g lipid, but the concentrations in people from the United States are much higher at approximately 35 ng/g lipid. Current PBDE concentrations in marine mammals from the Canadian Arctic are very low at approximately 5 ng/g lipid, but they have increased exponentially with a doubling time of approximately 7 yr. Marine mammals from the rest of the world have current PBDE levels of approximately 1000 ng/g lipid, and these concentrations have also increased exponentially with a doubling time of approximately 5 yr. Some birds' eggs from Sweden are also highly contaminated (at approximately 2000 ng/g lipid) and show PBDE doubling times of approximately 6 yr. Herring gull eggs from the Great Lakes region now have PBDE concentrations of approximately 7000 ng/g lipid, and these levels have doubled every approximately 3 yr. Fish from Europe have approximately 10 times lower PBDE concentrations than fish from North America. From these and other data, it is clear that the environment and people from North America are very much more contaminated with PBDEs as compared to Europe and that these PBDE levels have doubled every 4-6 yr. Analyses of the relative distributions of the most abundant PBDE congeners (using category averages and principal component analysis) indicated that these patterns cannot yet be used to assign sources to these pollutants.     

我国各地区环境介质中二噁英含量的对比分析

二噁英广泛存在于大气、土壤等环境介质中,因其特殊的物理化学及生物特性会严重危害人体健康和生态环境。本文总结了我国各地区大气中二噁英的污染现状,并对其进行对比分析,结果发现我国大部分地区大气中二噁英的平均浓度水平相当,几乎都低于日本环境大气的标准限;不同功能区大气中二噁英浓度差异较大,但各地区间不同功能区的二噁英浓度变化趋势一致,浓度由高到低大致为工业区、居民区、商业区、背景区,由此可为我国大气中二噁英的污染状况提供依据。     

Fate of pharmaceutical and trace organic compounds in three septic system plumes, Ontario, Canada

Three high volume septic systems in Ontario, Canada, were examined to assess the potential for onsite wastewatertreatment systems to release pharmaceutical compounds to the environment and to evaluate the mobility of these compounds in receiving aquifers. Wastewater samples were collected from the septic tanks, and groundwater samples were collected below and down gradient of the infiltration beds and analyzed for a suite of commonly used pharmaceutical and trace organic compounds. The septic tank samples contained elevated concentrations of several pharmaceutical compounds. Ten of the 12 compounds analyzed were detected in groundwater at one or more sites at concentrations in the low ng L(-1) to low microg L(-1) range. Large differences among the sites were observed in both the number of detections and the concentrations of the pharmaceutical compounds. Of the compounds analyzed, ibuprofen, gemfibrozil, and naproxen were observed to be transported atthe highest concentrations and greatest distances from the infiltration source areas, particularly in anoxic zones of the plumes.     

Atmospheric trends and radiative forcings of CF4 and C2F6 inferred from firn air

The atmospheric histories of two potent greenhouse gases, tetrafluoromethane (CF4) and hexafluoroethane (C2F6), have been reconstructed for the 20th century based on firn air measurements from both hemispheres. The reconstructed atmospheric trends show that the mixing ratios of both CF4 and C2F6 have increased during the 20th century by factors of approximately 2 and approximately 10, respectively. Initially, the increasing mixing ratios coincided with the rise in primary aluminum production. However, a slower atmospheric growth rate for CF4 appears to be evident during the 1990s, which supports recent aluminum industry reports of reduced CF4 emissions. This work illustrates the changing relationship between CF4 and C2F6 that is likely to be largely the result of both reduced emissions from the aluminum industry and faster growing emissions of C2F6 from the semiconductor industry. Measurements of C2F6 in the older firn air indicate a natural background mixing ratio of <0.3 parts per trillion (ppt), demonstrating that natural sources of this gas are negligible. However, CF4 was deduced to have a preindustrial mixing ratio of 34 -1 ppt (-50% of contemporary levels). This is in good agreement with the previous work of Harnisch et al. (18) and provides independent confirmation of their results. As a result of the large global warming potentials of CF4 and C2F6, these results have important implications for radiative forcing calculations. The radiative forcings of CF4 and C2F6 are shown to have increased over the past 50 years to values in 2001 of 4.1 x 10(-3) Wm(-2) and 7.5 x 10(-4) Wm(-2), respectively, relative to preindustrial concentrations. These forcings are small compared to present day forcings due to the major greenhouse gases but, if the current trends continue, they will continue to increase since both gases have essentially infinite lifetimes. There is, therefore, a large incentive to reduce perfluorocarbon emissions such that through the implementation of the Kyoto Protocol, the atmospheric growth rates may decline in the future.     

Atmospheric organochlorine pesticide concentrations near the Great Lakes: temporal and spatial trends

As a part of the Integrated Atmospheric Deposition Network, atmospheric organochlorine pesticide concentrations were measured in both the gas and particle phases at seven sites near the Great Lakes. Much higher organochlorine pesticide concentrations were found in the gas phase compared to that in the particle phase. Long-term decreasing trends were observed for most pesticides in both phases. Two different seasonal trends were observed in the particle phase: (a) in-use pesticides, such as endosulfan, showed higher concentrations in the summer, a time corresponding to their agriculture use, and (b) restricted organochlorine pesticides, such as lindane, showed higher particle-phase concentrations in the winter, presumably due to their enhanced partitioning from the gas phase to particles. Generally, Chicago had the highest concentrations of chlordanes, dieldrin, and sigmaDDT, suggesting that urban areas could be sources of these compounds to atmosphere. Point Petre had the highest concentrations of endosulfan, likely due to its agricultural application in Southern Ontario.     

Surfactants and the environment

As a result of their use in detergents and personal products and their subsequent disposal, anionic surfactants may achieve a wide distribution in the environment. It is therefore important to assess the hazard that this use might present to the environment.
In order to do this it is necessary to estimate the highest concentrations which are likely to occur at key points in the environment. These estimates may be based on a knowledge of the quantities used and the per capita consumption of water, and take account of the physico-chemical properties, biodegradation and treatability of the surfactant. The margin of safety between these estimates and the lowest concentrations causing adverse effects on sewage treatment operations, aquatic organisms and crops may then be determined.
Laboratory studies on linear alkyl benzene sulphonates, primary alkyl sulphates, linear alkyl ether sulphates and secondary alkane sulphonates suggest that their current levels in detergents and personal products present no hazard to the environment. This conclusion is confirmed by the results of environmental monitoring.
Les agents de surface et l'environment     

Highly polar organic compounds present in wood smoke and in the ambient atmosphere

Fine particulate matter emitted during wood combustion is known to contribute a significant fraction of the total fine aerosol concentration in the atmosphere of both urban and rural areas. In the present study, additional organic compounds that may act as wood smoke tracers in the atmosphere are sought. Polar organic compounds in wood smoke fine particulate matter are converted to their trimethylsilyl derivatives and analyzed by gas chromatography/mass spectrometry. Silylation enables the detection of n-alkanols, plant sterols, and a number of compounds derived from wood lignin that have not previously been reported in wood smoke samples, as well as levoglucosan and related sugar anhydrides formed during the combustion of cellulose. The concentrations of these compounds measured in source emissions are compared to the concentrations in atmospheric fine particle samples collected at a rural background site and at two urban sites in California's San Joaquin Valley. On the basis of this analysis, the sugar anhydrides galactosan and mannosan can be listed along with levoglucosan as being among the most abundant organic compounds detected in all samples.     

Measurements of atmospheric mercury species at a coastal site in the Antarctic and over the south Atlantic Ocean during polar summer

Mercury and many of its compounds behave exceptionally in the environment because of their volatility, capability for methylation, and subsequent biomagnification in contrast with most of the other heavy metals. Long-range atmospheric transport of elemental mercury, its transformation to more toxic methylmercury compounds, the ability of some to undergo photochemical reactions, and their bioaccumulation in the aquatic food chain have made it a subject of global research activities, even in polar regions. The first continuous high-time-resolution measurements of total gaseous mercury in the Antarctic covering a 12-month period were carried out at the German Antarctic research station Neumayer (70 degrees 39' S, 8 degrees 15' W) between January 2000 and February 2001. We recently reported that mercury depletion events (MDEs) occur in the Antarctic after polar sunrise, as was previously shown for Arctic sites. These events (MDEs) end suddenly during Antarctic summer. A possible explanation of this phenomenon is presented in this paper, showing that air masses originating from the sea-ice surface were a necessary prerequisite for the observations of depletion of atmospheric mercury at polar spring. Our extensive measurements at Neumayer of atmospheric mercury species during December 2000-February 2001 show that fast oxidation of gaseous elemental mercury leads to variable Hg0 concentrations during Antarctic summer, accompanied by elevated concentrations, up to more than 300 pg/m3, of reactive gaseous mercury. For the first time in the Southern Hemisphere, atmospheric mercury species measurements were also performed onboard of a research vessel, indicating the existence of homogeneous background concentrations over the south Atlantic Ocean. These new findings contain evidence for an enhanced oxidizing potential of the Antarctic atmosphere over the continent that needs to be considered for the interpretation of dynamic transformations of mercury during summertime.     

The global distribution of PCBs and organochlorine pesticides in butter

In this study we explored the use of butter as a sampling matrix to reflect the regional and global scale distribution of PCBs and selected organochlorine pesticides/metabolites in air. This was because persistent organic pollutants (POPs) concentrate in dairy fats, where concentrations are controlled by feed intake (primarily from pasture/silage), which is in turn primarily controlled by atmospheric deposition. Butter sigmaPCB concentrations varied by a factor of approximately 60 in 63 samples from 23 countries. They were highest in European and North American butter and lowest in southern hemisphere (Australian, New Zealand) samples, consistent with known patterns of historical global usage and estimated emissions. Concentrations in butter reflected differences in the propensity of PCB congeners to undergo long range atmospheric transport from global source regions to remote areas and the relatively even distribution of HCB in the global atmosphere. Concentrations of p,p'-DDT, p,p'-DDE, and HCH isomers all varied over many orders of magnitude in the butter samples, with highest levels in areas of current use (e.g. India and south/central America for DDT; India, China, and Spain for HCH). We conclude that butter is sensitive to local, regional, and global scale spatial and temporal atmospheric trends of many POPs and may therefore provide a useful sampling medium for monitoring purposes. However, to improve the quantitative information derived on air concentrations requires an awareness of climatic and livestock management factors which influence air-milk fat transfer processes.     

Twentieth Century Atmospheric Metal Fluxes into Central Park Lake, New York City

It is generally assumed that declining atmospheric lead concentrations in urban centers during the 1970s and 1980s were due almost entirely to the progressive introduction of unleaded gasoline. However, most environmental data are from monitoring programs that began only two to three decades ago, which limits their usefulness. Here, trace metal and radionuclide data from sediment cores in Central Park Lake provide a record of atmospheric pollutant deposition in New York City through the 20th century, which suggests that leaded gasoline combustion was not the dominant source of atmospheric lead for NYC. Lead deposition rates, normalized to known Pb-210 atmospheric influxes, were extremely high, reaching maximum values (>70 μg cm(-2) yr(-1)) from the late 1930s to early 1960s, decades before maximum emissions from combustion of leaded gasoline. Temporal trends of lead, zinc, and tin deposition derived from the lake sediments closely resemble the history of solid waste incineration in New York City. Furthermore, widespread use of solid waste incinerators in the United States and Europe over the last century suggests that solid waste incineration may have provided the dominant source of atmospheric lead and several other metals to many urban centers.     

Microalgae for “Healthy” Foods—Possibilities and Challenges

Abstract: Microalgae have the potential to become a novel source of bioactive molecules, especially for those who might wish to enhance the nutritional and functional quality of foods. Spirulina, one of the most popular microalgae, has been described by the World Health Organization as one of the greatest superfoods on earth serving as an example of the potential of microalgae. This review provides background on current and future uses of microalgae in the human diet, lists the most common species of microalgae used to this end, and describes some production methods used in research and industrial production and recovery. The review also discusses some of the difficulties so far encountered such as low productivities and recovery rates, as well as challenges in the production of compounds of interest. Many scientists and engineers in research centers around the globe are currently dedicated to solve these problems as the various capabilities of microalgae have caught the attention of the energy, environmental, and agricultural industries, we propose that the food industry should as well evaluate the potential of microalgae as a novel source of “health promoting” compounds.     

On the reversibility of environmental contamination with persistent organic pollutants

An understanding of the factors that control the time trends of persistent organic pollutants (POPs) in the environment is required to evaluate the effectiveness of emission reductions and to predict future exposure. Using a regional contaminant fate model, CoZMo-POP 2, and a generic bell-shaped emission profile, we simulated time trends of hypothetical chemicals with a range of POP-like partitioning and degradation properties in different compartments of a generic warm temperate environment, with the objective of identifying the processes that may prevent the reversibility of environmental contamination with POPs after the end of primary emissions. Evaporation from soil and water can prevent complete reversibility of POP contamination of the atmosphere after the end of emissions. However, under the selected conditions, only for organic chemicals within a narrow range of volatility, that is, a logarithm of the octanol air equilibrium partition coefficient between 7 and 8, and with atmospheric degradation half-lives in excess of a few month can evaporation from environmental reservoirs sustain atmospheric levels that are within an order of magnitude of those resulting from primary emissions. HCB and α-HCH fulfill these criteria, which may explain, why their atmospheric concentrations have remained relatively high decades after their main primary emissions have been largely eliminated. Soil-to-water transfer is found responsible for the lack of reversibility of POP contamination of the aqueous environment after the end of emissions, whereas reversal of water-sediment exchange, although possible, is unlikely to contribute significantly. Differences in the reversibility of contamination in air and water suggests the possibility of changes in the relative importance of various exposure pathways after the end of primary emissions, namely an increase in the importance of the aquatic food chain relative to the agricultural one, especially if the former has a benthic component. Since simulated time trends were strongly dependent on degradation half-lives, partitioning properties and selected environmental input parameters, it should not be surprising, that different field studies often generate highly divergent time trends.