Effects of side keels on patrol vessel safety in astern waves

Planing hull vessel is well-known to have the problem of low damping and susceptible to large roll angles when encountering beam seas especially when stopped or operated at low speed. One approach to reduce this problem is to incorporate a pair of side keels. The effects of the side keels on both roll damping and resistance of a planing hull patrol vessel were experimentally evaluated by varying length, breadth and the position of the side keels. Tests data of the side keels have been presented on the roll damping coefficients and the resistance forces of the vessel. Next, the roll damping coefficients were utilised in time domain simulation program based on a six-degree-of-freedom mathematical model to predict the roll response and assess the vessel safety in astern waves for the case with and without the side keels. The results from the time domain simulation program have indicated that the effects of a pair of side keels can improve the vessel safety.     

A 3D fully coupled analysis of nonlinear sloshing and ship motion

This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion.     

Studies on an algorithm to control the roll motion using active fins

The very purpose of attaching fins to the hull is to reduce the roll motions of a ship. Roll minimization is a requisite for various operations in the seas. The presence of fin system provides enhanced state of stabilization especially when the vessel is performing a fast maneuvering amidst rough environmental disturbance. The fins in turn are activated by electro-hydraulic mechanism based on the in-built intelligence as per control theory like proportional–integral–derivative (PID) or fuzzy logic. As per this paper, fin system is activated using PID control algorithm. A frigate-type warship is considered for the demonstration purpose. Nonlinear roll motions are controlled using active fins. Lift characteristics of the fins in hydrodynamic flow were studied using CFD package fluent.Good amount of reduction in roll amplitude is achieved from various simulations in random sea. The approach can be used for any irregular sea conditions.     

一种新型干树式半潜平台设计

开发了一种新型的深吃水干树式半潜生产平台(TCDD-Semi),该平台可用于中国南海深水区域的油气田开发。它的一个显著特点是立柱的截面形状呈现为渐变形式,而非传统的等截面形式。立柱的底部最大,向上逐渐变小,再结合适当的下浮体设计,能够为平台在服役前期及在位状态时提供足够的浮力以及稳性。最重要的是这种新型立柱的设计能够明显地减小平台在恶劣海况时的垂向运动,从而使在平台上布置具有干式采油树的TTR立管系统成为可能。此外,这种渐变式的立柱设计也有利于减弱平台在流作用下的涡激诱导运动(VIM)。分析结果表明这种渐变式立柱半潜平台可以明显降低平台的垂向运动,也可以在码头组装时提供足够的浮力以及在平台下沉过程中提供足够的稳性。平台优越的垂向运动性能可以使顶部张紧式立管的行程范围限制在10.5 m之内(包括平台偏移、垂荡运动、潮汐影响、海床沉降、热膨胀等因素)。分析结果表明平台的垂荡范围、水平偏移、倾侧角度、上部模块重心处的加速度等可以满足设计要求,证明了这种新型干树式半潜平台的可行性。     

On unstable ship motions resulting from strong non-linear coupling

In this paper, the modelling of strong parametric resonance in head seas is investigated. Non-linear equations of ship motions in waves describing the couplings between heave, roll and pitch are contemplated. A third-order mathematical model is introduced, aimed at describing strong parametric excitation associated with cyclic changes of the ship restoring characteristics. A derivative model is employed to describe the coupled restoring actions up to third order. Non-linear coupling coefficients are analytically derived in terms of hull form characteristics.The main theoretical aspects of the new model are discussed. Numerical simulations obtained from the derived third-order non-linear mathematical model are compared to experimental results, corresponding to excessive motions of the model of a transom stern fishing vessel in head seas. It is shown that this enhanced model gives very realistic results and a much better comparison with the experiments than a second-order model.     

Nonlinear heave radiation forces on two-dimensional single and twin hulls

A study of nonlinear heave radiation of two-dimensional single and double hulls has been carried out in the time domain. The problem is analyzed by means of a fully nonlinear mathematical model, referred to as the mixed Eulerian–Lagrangian (MEL) model, which is based on an integral relation formulation coupled with time-integration of the nonlinear free-surface boundary conditions. The integral equation solver is based on a cubic-spline boundary-element scheme in which both potential and velocity continuity conditions can be enforced through the intersection points. The body undergoes periodic forced heave oscillation. By implementing effective wave-absorbing beaches at the two ends of the rectangular numerical tank, long-term steady-state force-histories could be achieved consistently in all computations.Results in terms of radiation forces for rectangular and triangular single- and twin-hull geometries are presented and discussed. Linear hydrodynamic forces in terms of added-mass and damping are validated for the rectangular hull. The Fourier-analyzed results reveal the extent of nonlinear (higher-order) components in the force-signals over different parameters which include the amplitudes of oscillation, hull-spacing for the twin-hulls and water depth.     

Seakeeping performance of fishing vessels in irregular waves

A study of the seakeeping performance of a set of fishing vessels is carried out aiming to identify the seakeeping criteria, and vessel conditions that limit the operability of the fishing vessels in certain sea states. Ship motions and derived responses are obtained in fully developed sea states using the transfer functions of the hull forms. Those responses are assessed against the prescribed values, for the chosen criteria, to determine the vessels operational conditions that might result in hazards or seasickness. For the purpose of this study, each fishing vessel is considered operating in sea states 5 and 6, with different Froude numbers and heading angles, and their short term responses are assessed against the most relevant criteria related with the absolute and relative motions, accelerations, slamming and green water on deck. The results obtained show that roll and pitch criteria are most critical for seakeeping performance, and there is a significant influence of the transverse metacentric height, GMt, and the location of the reference checking points in the seakeeping performance of these fishing vessels.     

A nonlinear model of parametric rolling stabilization by anti-roll tanks

The present paper describes a mathematical model in which the fluid motion inside a U-tank is nonlinearly coupled to the heave, roll and pitch motions of the ship. The main purpose of the investigation is centred on the control of roll motion in the case of parametric resonance in longitudinal waves. A transom stern small vessel, known to be quite prone to parametric amplification, is employed in the study. Four tank designs are employed in order to study the influence of tank mass, tank natural frequency and tank internal damping on the control of parametric rolling at different head seas conditions. Additionally, the influence of the vertical position of the tank is also investigated. The main results are presented in the form of limits of stability, with encounter frequency and wave amplitudes as parameters. Distinct dynamical characteristics are discussed and conclusions are drawn on the relevant parameters for the efficient control of the roll amplifications in head seas.     

Experimental study of wave loads on a small vehicle in close proximity to a large vessel

Operations involving the launch or recovery of a smaller vessel from a larger one are extremely dangerous in high sea states and, therefore, they are normally carried out in low to moderate sea states. However, this can be severely restrictive and in some situations, carrying out such operations in high sea states is unavoidable. Here we report on a detailed investigation of the interaction between two vessels of different size in order to characterise their hydrodynamic interaction under different conditions and to provide insight for operational purposes. Model experiments were conducted to investigate the hydrodynamic interaction between two vessels in close proximity in waves. Previous studies into this interaction have focused on two vessels with comparable size/displacement. This study focused on the interaction between vessels of very different sizes, a platform supply vessel and a lifeboat, at various separation distances between the two models and wave headings. It is found that the effect of the hydrodynamic interaction on the wave loads on the lifeboat model is substantial. The load responses show a strong non-linearity (high order harmonic components). In head waves, the effect of the hydrodynamic interaction on the wave loads is greater in the transverse modes (sway, roll and yaw) than in the longitudinal modes (surge, heave and pitch). The sheltering effects of the larger model on the lifeboat model were also evident from the experiments. The results of this investigation may be used to inform the planning of marine operations, such as the launch and recovery of a lifeboat or an Autonomous Underwater Vehicle (AUV) from a mothership and the transfer of equipment or personnel between vessels. The data will also provide a useful resource for validation of Computational Fluid Dynamics (CFD) codes and other numerical simulations, and can be used to better understand the limitations and potential widening of the operational weather windows and to ensure that operations are carried out safely.     

Parametric studies on seaworthiness of SWATH ships

This paper reports seakeeping studies performed on a parametrically varied set of SWATH hull forms. The SWATH form, because of its de-linked nature of design affords many variations of the underwater hull geometry without affecting overall deck length and beam. For a given displacement, the hull form can be varied in terms of length, basic section shape, maximum area of cross section of under water hull and strut water plane shape. Using these variants, a parametric family of hull forms has been generated employing Chebychev polynomial scheme for representing sectional area distribution and using a bi-quintic B-spline based surface definition scheme. Not all designs offer optimal performance in a given sea state. A twin-hull motion analysis program SEDOS has been used to study the motions and other dynamic effects. Setting criteria for operability, these dynamic effects have been quantified into a single value namely, operability index. The approach here fulfils an investigation at the design stage in order to tap the full advantage of the SWATH form. The study brings out a methodology for assessment of the SWATH at the design stage highlighting interesting results related to section shapes and sectional area distribution. Thus, combining a newly developed interactive surface generation scheme with an analysis package, a rapid assessment tool is offered for new design.     

Sea state estimation using vessel response in dynamic positioning

This paper presents a novel method for estimating the sea state parameters based on the heave, roll and pitch response of a vessel conducting station keeping automatically by a dynamic positioning (DP) system, i.e., without forward speed. The proposed algorithm finds the wave spectrum estimate from the response measurements by iteratively solving a set of linear equations, and it is computationally efficient. The main vessel parameters are required as input. Apart from this the method is signal-based, with no assumptions on the wave spectrum shape. Performance of the proposed algorithm is demonstrated on full-scale experimental DP data of a vessel in three different sea states at head, bow quartering, beam, stern quartering and following sea waves, respectively.     

Evaluation of cross curves of fishing vessels at the preliminary design stage

The prediction of ship stability during the early stages of the design process is very important from the point of a vessel's safety. Hence, in this study, a formula is presented to estimate cross curves of fishing vessels to predict initial stability at the preliminary design stage. For this purpose, 175 fishing vessel forms have been generated from Doust trawler hull series. The predictive technique is established by regression analysis of systematically varied fishing vessel series data. The mathematical model is constructed as a function of main design parameters such as length to beam ratio L_WL/B_WL, beam to draft ratio B_WL/T, moulded depth to draft ratio D/T and block coefficient C_B. This prediction is also used to determine the effect of specific hull form parameters and load conditions on the stability of the fishing vessel. Some basic considerations on how the proposed method can be applied to a new fishing vessel are presented.     

Depthimeter-Precise Vessel Depth for Bathymetry

This article describes the design, operation, and field testing of the depthimeter. The depthimeter merges heave and acoustically derived vessel depth to form estimates of instantaneous vessel depth and instantaneous sea surface height, both relative to mean sea level. Results from sea trials held in December 1997 demonstrate successful operation of the system.     

Resonant heave motion of semisubmersible vessels

This paper is concerned with nonlinear resonant heave motion of a semisubmersible vessel at the survival draft. Due to the small potential of the hulls at deep draft the resonant motion is governed almost entirely by nonlinear drag forces on the hull and bracing members.Long period ocean swell following a storm can excite semisubmersiblesat resonance in heave and delay the resumption of drilling activities.The paper presents a simple closed form solution for determining the heave motion at the natural period which agrees well with other theoretical and experimental results.     

Study on coupling effects of ship motion and sloshing

This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope.     

Analysis of roll motion and stability of a fishing vessel in head seas

The present paper describes an investigation on the relevance of parametric resonance for a typical fishing vessel in head seas. Results for different Froude numbers are discussed based on experimental, numerical and analytical studies.The first region of resonance is investigated. Distinct wave amplitudes are considered. Some intense resonances are found to occur. The paper compares the experimental results with non-linear time simulations of the roll motion. Very good agreement is found, even when large motions take place.Finally, in order to analyze the experimental/numerical results, analytic consideration is given to distinct parameters affecting the dynamic process of roll amplification. The influence of heave, pitch, wave passage effect, speed and roll restoring characteristics are discussed.     

Experimental studies of a damaged ship section in forced heave motion

This work documents a detailed series of experiments performed in a wave flume on a thin walled prismatic hull form. The model consists of a rectangular opening located on the side. The length of the model is slightly smaller than the flume breadth to achieve two-dimensional (2D) behavior in the experiments. Forced oscillatory heave tests in calm water have been carried out by varying the model-motion parameters and examining both intact and damaged conditions. Video recordings, measurements of the wave elevation inside the damaged compartment and of the force on the model were performed in all the experiments. The effect of damage opening in the model on hydrodynamic loads is examined by comparing with an intact section. A theoretical analysis is used to explain the behavior of added mass and damping coefficients in heave for a 2D damaged section. The presented results demonstrate occurrence of sloshing and piston mode resonances in the tests and their influence on the hydrodynamics loads of a damaged ship. Detailed physical investigations are presented at these resonance frequencies for the damaged section. Effect of filling level in the damage compartment, damage-opening length and air compressibility in the airtight compartment is examined. Nonlinear effects are documented and appear dominant, especially, for lowest filling level where we have shallow-water depth conditions in the damaged compartment. Resonance phenomena that can lead to significant local loads are identified for the shallow water condition. Air compressibility in the airtight compartment and floodwater act as a coupled system and influence inflow/outflow of floodwater in the compartment. It has a significant effect on local floodwater behavior in the damaged compartment.     

Vortex Patterns and Roll Damping on Various Cross Sections of Ships

A numerical study is presented on roll damping of ships by solving Navier-Stokes equation.Two-Dimensional unsteady incompressible viscous flow around the rolling cylinders of various ship-likecross sections are numerically simulated by use of the computational scheme previously developed by theauthors.The numerical results show that the location of the vortices is very similar to the existing experi-mental result.For comparison of vortex patterns and roll damping on various ship-like cross sections,vari-ous distributions of shear stress and pressure on the rolling ship hull surface are presented in this paper.Itis found that there are two vortices around the midship-like section and there is one vortex around the foreor stern section.Based on these simulation results.the roll damping of a ship including viscous effects iscalculated.The contribution of pressure to the roll moment is larger than the contribution of frictionalshear stress.     

Time-domain wave diffraction of two-dimensional single and twin hulls

The nonlinear diffraction of 2D single and twin hulls are studied by employing a mixed Eulerian–Lagrangian model based on a higher-order cubic-spline boundary element solver. Two types of simulations are considered. In the first, waves are generated by a piston-type wave-maker in a rectangular tank and in the second case a nonlinear incident wave is assumed to exist in the tank in which the body is introduced. For the application of this model, the full nonlinear diffraction problem is recast in terms of a perturbation wave-field. Computations are performed for rectangular and triangular hull geometries. Computed results show significant nonlinearities, particularly in the heave force. The twin hull results show the influence of wave interference on the diffraction forces. This interference influences the surge force considerably, but heave force is less affected.     

船载波浪发电设备设计及其性能研究

为解决小型无人船由于船体空间紧凑,携带燃料较少导致的续航力差、航程短等问题,本文以三体船为平台,将摆式波浪能发电技术与多体船相结合,提出了一种新型船载波浪发电设备设计方案。该发电设备可由主侧船体之间的波浪运动响应差异驱动,在海上航行时捕获波浪能并转化为电能,以此来补充船上能源。通过数值软件对三体船进行性能预报,结果表明,在四级海况下迎浪航行时,三体船平均波浪能捕获功率可达3.57 kW,波浪能一级转换效率为7.32%,能够有效的补充船上能源。同时,安装船载波浪发电设备具备减摇减荡的效果,提升了三体船的航行稳定性,进一步体现了该装置的可行性和实用性。