Polyaniline–organoclay nanocomposites as curing agent for epoxy: Preparation and characterization

Polyaniline (PANI)–organoclay/Epoxy (EP) nanocomposites were prepared. PANI–organoclay nanocomposites were used as curing agent for EP. Organoclay was prepared by an ion exchange process between sodium cations in MMT and NH₃⁺ groups in polyoxypropylene (D₂₃₀). PANI–organoclay nanocomposite was synthesized by in situ polymerization of aniline in (14 wt%) organoclay. Infrared spectra and differential scanning calorimetry confirm the curing of EP. The absence of d₀₀₁ diffraction band of organoclay in the nanocomposites was observed by X‐ray diffraction. The structure argument was further supported by scanning electron microscopy and transmission electron microscopy. Electrical conductivity of the nanocomposites within the range 2.1 × 10⁻⁷–3.2 × 10⁻⁷ S/cm depending on the concentration of the PANI/D₂₃₀‐MMT. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Synthesis,characterization, and thermal aging behavior of HCl‐doped polyaniline/TRGO nanocomposites

In this article polyaniline (PANI) nanocomposites containing thermally reduced graphene oxide (TRGO) were synthesized and characterized before and after thermal aging. The nanocomposites were prepared through in situ oxidative polymerization of aniline in the presence of TRGO nanoplatelets. FTIR and Raman spectroscopies, XRD, FESEM, and electrical conductivity measurements were used to characterize synthesized materials. PANI/TRGO nanocomposites showed considerably higher electrical conductivity when compared to pure PANI, which was associated with the higher electrical conductivity of TRGO and increased crystallinity of PANI in the presence of TRGO. Pure PANI and PANI/TRGO nanocomposites were thermally aged at 70, 80, 90, and 100 °C. The results showed that the characteristic time of thermal aging process is higher for PANI/TRGO nanocomposites and increases with TRGO loading, which indicates better stability of conductivity during thermal aging process. On the other hand, the characteristic time of thermal aging reduced with aging temperature and a fast decrease was observed from 80 to 90 °C. Improved resistance over thermal aging can be attributed to the barrier effect of TRGO nanoplatelets to the dopant molecules, which retards conductivity degradation in the thermal aging process. Furthermore, TRGO increases PANI crystallinity and it can also prevent crystallinity reduction during thermal aging process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44635.     

Preparation,structural, and electrical studies of polyaniline/ZnFe2O4 nanocomposites

Polyaniline/ZnFe₂O₄ nanocomposites were synthesized by a simple and inexpensive one‐step in situ polymerization method in the presence of ZnFe₂O₄ nanoparticles. The structural, morphological, and electrical properties of the samples were characterized by wide angle X‐ray diffraction (WAXD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). WAXD and SEM revealed the formation of polyaniline/ZnFe₂O₄ nanocomposites. Infrared spectroscopy indicated that there was some interaction between the ZnFe₂O₄ nanoparticles and polyaniline. The dc electrical conductivity measurements were carried in the temperature range of 80 to 300 K. With increase in the doping concentration of ZnFe₂O₄, the conductivity of the nanocomposites found to be decreasing from 5.15 to 0.92 Scm⁻¹ and the temperature dependent resistivity follows ln ρ(T) ∼ T^−1/2 behavior. The nanocomposites (80 wt % of ZnFe₂O₄) show a more negative magnetoresistance compared with that of pure polyaniline (PANI). These results suggest that the interaction between the polymer matrix PANI and zinc nanoparticles take place in these nanocomposites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of ferromagnetic polyaniline with conductivity in an applied magnetic field

Ferromagnetic polyaniline (PANI) with conductivity was synthesized with peroxydisulfate as an oxidant and horseradish peroxidase as a catalyst in an N′‐a‐hydroxythylpiperazine‐N′‐ethanesulfanic acid buffer solution containing aniline, HCl, and NiCl₂·6H₂O in an applied magnetic field. The result of an electron paramagnetic resonance spectrum indicated that there were unpaired electrons in the resulting product, the spin density of which was 7.60 × 10¹⁹ spins/g. The curve of the magnetization versus the magnetic field showed that PANI had soft ferromagnetic behavior at about 300 K. The saturation magnetization and coercive force of PANI were 0.033 emu/g and 5 Oe, respectively. Ultraviolet–visible and Fourier transform infrared spectra indicated that there was interaction between Ni²⁺ and PANI chains but the structure of the backbone chains of PANI synthesized in the presence of a magnetic field hardly changed compared with that of PANI synthesized without NiCl₂·6H₂O. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of polypyrrole using TiO2 nanotube@poly(sodium styrene sulfonate) as dopant and template

A polypyrrole (PPy) using TiO₂ nanotube@poly(sodium styrene sulfonate) (TiO₂@PSS) as dopant and template was synthesized by chemical oxidation polymerization. The template TiO₂@PSS consisting of a TiO₂ nanotube core and PSS on the surface was prepared by a “grafting from” approach. PPy on the layer of TiO₂@PSS (TiO₂@PSS/PPy) was characterized by transmission electron microscopy, scanning electron microscopy, X‐ray photoelectron spectroscopy (XPS), Fourier‐transform infrared spectrometry (FTIR), Raman spectroscopic analysis, UV‐visible (UV‐vis) spectroscopy, thermo gravimetric analysis, and electrical conductivity analysis. Results showed that TiO₂@PSS/PPy was successfully fabricated. The electrical conductivity of the TiO₂@PSS/PPy nanocomposites at room temperature was 11.6 S cm⁻¹, which was higher than that of the PPy (4.2 S cm⁻¹). This result was consistent with those based on FTIR, UV‐vis spectroscopy, and XPS analyses. The nanocomposites have nanoparticle size and controllable morphology and thus potential applications in photoelectrochemical devices, photocatalytic devices, conductive inks, electronic printing sensors, and electrodes. POLYM. COMPOS., 37:462–467, 2016. © 2014 Society of Plastics Engineers     

Characterization and AC conductivity of polyaniline–montmorillonite nanocomposites synthesized by mechanical/chemical reaction

Polyaniline–clay nanocomposites were prepared by solid state polymerization of aniline chloride in the interlayer of montmorillonite through the use of persulfate of ammonium as oxidant. The proportion of aniline to clay and the molar ratio of oxidant to aniline are being varied. The analyse of UV visible and FTIR spectroscopy demonstrated that aniline has been polymerized to polyaniline (PANI) in its conducting emeraldine form. The conformation adopted by PANI chains in the clay interlayer depended on the molar ratio of aniline to montmorillonite. Thermogravimetric analysis of the nanocomposites suggested that polyaniline chains are more thermally stable than those of free polyaniline prepared by solid–solid reaction. The AC conductivity data of different synthesized nanocomposites were analyzed as a function of frequency. Low frequency conductivities of polyaniline/montmorillonite nanocomposites materials ranges from 0.18 to 5.6 × 10^?3 S/cm. All characterization data were compared to those of free polyaniline that was synthesized using a solid–solid reaction.     

Hybrid composites of conductive polyaniline and nanocrystalline titanium oxide prepared via self-assembling and graft polymerization

After TiO₂ nanoparticles were surface modified, conductive polyaniline (PANI) layer was chemically grafted on the surface of the self-assembled monolayer (SAM) coated TiO₂ nanoparticles, resulting in PANI/SAM-TiO₂ composites. In the preparation process of the hybrid composites, γ-aminopropyltriethoxysilane was used as a coupling agent to form a dense aminopropylsilane monolayer with active sites for the graft polymerization of aniline. The resulted composite nanoparticles were characterized by using TEM, FTIR, TGA, and UV-vis-diffuse reflectance spectroscopy. The thermogravimetric analysis confirmed that the inserted SAM layer improved the thermal stability of the PANI-TiO₂ nanocomposites. Compared with neat-TiO₂ nanoparticles without any surface modification, moreover, the PANI/SAM-TiO₂ nanocomposites showed better photocatalytic activity in photodegradation of methyl orange under sunlight, which was partly attributed to the sensitizing effect of PANI.     

Novel electrically conductive and ferromagnetic composites of poly(aniline‐co‐aminonaphthalenesulfonic acid) with iron oxide nanoparticles: Synthesis and characterization

Nanocomposites of iron oxide (Fe₃O₄) with a sulfonated polyaniline, poly(aniline‐co‐aminonaphthalenesulfonic acid) [SPAN(ANSA)], were synthesized through chemical oxidative copolymerization of aniline and 5‐amino‐2‐naphthalenesulfonic acid/1‐amino‐5‐naphthalenesulfonic acid in the presence of Fe₃O₄ nanoparticles. The nanocomposites [Fe₃O₄/SPAN(ANSA)‐NCs] were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, elemental analysis, UV–visible spectroscopy, thermogravimetric analysis (TGA), superconductor quantum interference device (SQUID), and electrical conductivity measurements. The TEM images reveal that nanocrystalline Fe₃O₄ particles were homogeneously incorporated within the polymer matrix with the sizes in the range of 10–15 nm. XRD pattern reveals that pure Fe₃O₄ particles are having spinel structure, and nanocomposites are more crystalline in comparison to pristine polymers. Differential thermogravimetric (DTG) curves obtained through TGA informs that polymer chains in the composites have better thermal stability than that of the pristine copolymers. FTIR spectra provide information on the structure of the composites. The conductivity of the nanocomposites (～ 0.5 S cm^?1) is higher than that of pristine PANI (～ 10^?3 S cm^?1). The charge transport behavior of the composites is explained through temperature difference of conductivity. The temperature dependence of conductivity fits with the quasi‐1D variable range hopping (quasi‐1D VRH) model. SQUID analysis reveals that the composites show ferromagnetic behavior at room temperature. The maximum saturation magnetization of the composite is 9.7 emu g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Fabrication of core–shell nanocomposites with enhanced photocatalytic efficacy

The current study establishes the unprecedented involvement in the evolution and production of novel core–shell nanocomposites composed of nanosized titanium dioxide and aniline‐o‐phenylenediamine copolymer. TiO₂@copoly(aniline and o‐phenylenediamine) (TiO₂@PANI‐o‐PDA) core–shell nanocomposites were chemically synthesized in a molar ratio of 5:1 of the particular monomers and several weights of nano‐TiO₂ via oxidative copolymerization. The construction of the TiO₂@PANI‐o‐PDA core–shell nanocomposites was ascertained from Fourier transform IR spectroscopy, UV–visible spectroscopy and XRD. A reasonable thermal behavior for the original copolymer and the TiO₂@PANI‐o‐PDA core–shell nanocomposites was investigated. The bare PANI‐o‐PDA copolymer was thermally less stable than the TiO₂@PANI‐o‐PDA nanocomposites. The core–shell feature of the nanocomposites was found to have core and shell sizes of 17 nm and 19–26 nm, respectively. In addition, it was found that the addition of a high ratio of TiO₂ nanoparticles increases the electrical conductivity and consequently lowers the electrical resistivity of the TiO₂@PANI‐o‐PDA core–shell nanocomposites. The hybrid photocatalysts exhibit a dramatic photocatalytic efficacy of methylene blue degradation under solar light irradiation. A plausible interpretation of the photocatalytic degradation results of methylene blue is also demonstrated. Our setup introduces a facile, inexpensive, unique and efficient technique for developing new core–shell nanomaterials with various required functionalities and colloidal stabilities. © 2018 Society of Chemical Industry     

Solid‐state synthesis and characterization of polyaniline/nano‐TiO2 composite

Polyaniline/nano‐TiO₂ composites with the content of nano‐TiO₂ varying from 6.2 wt % to 24.1 wt % were prepared by using solid‐state synthesis method at room temperature. The structure and morphology of the composites were characterized by the Fourier transform infrared (FTIR) spectra, ultraviolet‐visible (UV–vis) absorption spectra, X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The electrochemical performances of the composites were investigated by galvanostatic charge–discharge measurement, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The results from FTIR and UV–vis spectra showed that the composites displayed higher oxidation and doping degree than pure PANI. The XRD and morphological studies revealed that the inclusion of nano‐TiO₂ particles hampered the crystallization of PANI chains in composites, and the composites exhibited mixed particles from free PANI particles and the nano‐TiO₂ entrapped PANI particles. The galvanostatic charge–discharge measurements indicated that the PANI/nano‐TiO₂ composites had higher specific capacitances than PANI. The composite with 6.2 wt % TiO₂ had the highest specific capacitance among the composites. The further electrochemical tests on the composite electrode with 6.2 wt % TiO₂ showed that the composite displayed an ideal capacitive behavior and good rate ability. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of exfoliated conductive polyaniline–graphite nanocomposites in supercritical CO2

Exfoliated polyaniline–graphite nanocomposites with high electrical conductivity were synthesized. Graphite powders were first expanded with ScCO₂ treatment and then aniline monomers were added to the suspension. The morphology and structure of the synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectroscopy and XRD analysis. SEM and TEM micrographs revealed that graphite was successfully expanded through ScCO₂ treatment, and the graphite powders are fully exfoliated in the final nanocomposite. FTIR results confirmed formation of polyaniline (PANI), and UV/Vis analysis showed the conductive emeraldine state of the synthesized PANI. Furthermore, it was clearly demonstrated that ScCO₂ medium does not have any effect on chemical structures of the PANI. The electrical conductivities of the PGNs enhanced dramatically with increasing graphite loading up to 40% and subsequently decreased due to the weaker bridged linkage between PANI and graphite layers at high graphite loading.     

Synthesis and characterization of polyaniline–organoclay nanocomposites

Polyaniline (PANI)–organoclay nanocomposites were prepared. Intercalation of aniline monomer into montmorillonite (MMT) modified by polyoxyalkylene was followed by subsequent oxidative polymerization of the aniline in the interlayer spacing. The organoclay was prepared by cation exchange process between sodium cation in MMT and onium ion in four different types of polyoxyalkylene diamine and triamine with different molecular weight. Infrared spectra confirm the electrostatic interaction between the positively charged onium group (NH₃⁺) and the negatively charged surface of MMT. X‐ray diffraction analysis provides a structural information. The absence of d₀₀₁ diffraction band in the nanocomposites was observed at certain types and contents of organoclay. Scanning electron microscopy and transmission electron microscopy were employed to determine the dispersion of the clay into PANI. The thermal degradation behavior of PANI in the nanocomposites has been investigated by thermogravimetric analysis. The weight loss suggests that the PANI chains in the nanocomposites are more thermally stable than pristine PANI. This improvement is attributed to the presence of nanolayers with high aspect ratio acting as barriers, thus shielding the diffusion of degraded PANI from the nanocomposites. The electrical conductivity of the nanocomposites was increased 30 times more than that of pure MMT at a certain concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Development of nanocomposites of bentonite with polyaniline and poly(methacrylic acid)

Nanocomposites of bentonite with polyaniline (PANI), poly(methacrylic acid) (PMAA), and poly(aniline‐co‐methacrylic acid) (PANI‐co‐PMAA) were prepared by in situ intercalative polymerization technique. The nanocomposites were characterized by FTIR and UV–visible spectroscopies, XRD, SEM, TEM, as well as TG‐DTA studies. The in situ intercalative polymerization of PANI, PMAA, and PANI‐co‐PMAA within bentonite layers was confirmed by FTIR, XRD, SEM, as well as TEM studies. XRD confirmed the intercalation of polymers and copolymer in bentonite. The average particle size of the nanocomposites was found to be in the range of 250–500 nm. The thermal stability was found be the highest for PANI‐co‐PMAA‐bentonite. The swelling behavior studies suggest that these nanocomposites hold potential for their utilization in absorption of toxic materials from waste water. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3299–3306, 2007     

Cellulose/polyaniline derivatives nanocomposites: Synthesis and their performance in removal of anionic dyes from simulated industrial effluents

A series of cellulose/polyaniline derivatives [polyaniline (PANI), poly(N‐methylaniline) (PNMANI), and poly(N‐ethylaniline) (PNEANI)] nanocomposites were synthesized by in situ chemical oxidation polymerization method and successfully applied for removal of acid red 4 and direct red 23 dyes from simulated industrial effluents. The synthesized nanocomposites were analyzed using Fourier transform infrared and ultraviolet‐visible spectroscopies, thermogravimetric analysis and scanning electron microscope. The effect of some parameters including pH, adsorbent amount, and initial dyes concentrations on adsorption processes were evaluated. The maximum adsorption capacities (Q_m) for the synthesized nanocomposites were calculated, and among them the Cell/PANI sample showed the highest Q_m for both AR4 (117 mg g^–1) and DR23 (56 mg g^–1) dyes. The regeneration and reusability tests exhibited that the synthesized nanocomposites had the relatively good reusability after five repetitions of the adsorption–desorption cycles. According to results, we envision that these nanocomposites, especially Cell/PANI, find application for removal of anionic dyes from industrial effluents mainly due to their low production costs, high adsorption effectiveness, and relatively good reusability. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45352.     

Synthesis and dielectric properties of polyaniline/titanium dioxide nanocomposites

Two series of polyaniline–TiO₂ nanocomposite materials were prepared in base form by in situ polymerization of aniline with inorganic fillers using TiO₂ nanoparticles (P25) and TiO₂ colloids (Hombikat), respectively. The effect of particle sizes and contents of TiO₂ materials on their dielectric properties was evaluated. The as-synthesized polyaniline–TiO₂ nanocomposite materials were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), thermal analysis (DTA/TGA), and X-ray diffraction (XRD). Dielectric properties of polyaniline–TiO₂ nanocomposites in the form of films were measured at 1 KHz–1 MHz and a temperature range of 35–150 °C. Higher dielectric constants and dielectric losses of polyaniline–TiO₂ nanocomposites than those of neat PANI were found. PANI–TiO₂ nanocomposites derived from P25 exhibited higher dielectric constants and losses than those from Hombikat TiO₂ colloids. Electrical conductivity measurements indicate that the conductivity of nanocomposites is increased with TiO₂ content. The dielectric properties and conductivities are considered to be enhanced due to the addition of TiO₂, which might induce the formation of a more efficient network for charge transport in the base polyaniline matrix.     

A novel route for the synthesis of poly(2‐hydroxyethyl methacrylate) grafted TiO2 nanoparticles via surface thiol‐lactam initiated radical polymerization

Hybrid nanocomposites of poly(2‐hydroxyethyl methacrylate) (PHEMA) and TiO₂ nanoparticles were synthesized via surface thiol‐lactam initiated radical polymerization by following the grafting from strategy. Initially, TiO₂ nanoparticles were modified by 3‐mercaptopropyl trimethoxysilane to prepare thiol functionalized TiO₂ nanoparticles (TiO₂? SH). Subsequently, surface initiated polymerization of 2‐hydroxyethyl methacrylate was conducted by using TiO₂? SH and butyrolactam as an initiating system. The anchoring of PHEMA onto the surface of TiO₂ nanoparticles was investigated by FTIR, ¹H‐NMR, XPS, TGA, and XRD analyses. The experimental results indicated a strong interaction between PHEMA and TiO₂ nanoparticles owing to covalent bonding. The TEM and SEM images of PHEMA‐g‐TiO₂ showed that the agglomeration propensity of TiO₂ nanoparticles was significantly reduced upon the PHEMA functionalization. The molecular weight and polydispersity index of the cleaved PHEMA from the surface of TiO₂ nanocomposites were estimated by GPC analysis. An improved thermal property of the nanocomposites was observed from TGA analysis. PHEMA‐g‐TiO₂ nanocomposites were found to be highly dispersible in organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Characterization and physical properties investigation of conducting polypyrrole/TiO2 nanocomposites prepared through a one‐step “in situ” polymerization method

Nowadays, nanocomposites are a special class of materials having unique physical properties and wide application potential in diverse areas. The present research work describes an efficient method for synthesis of a series of polypyrrole/titanium dioxide (PPy/TiO₂) nanocomposites with different TiO₂ ratios. These nanocomposites were prepared by one‐step in situ deposition oxidative polymerization of pyrrole hydrochloride using ferric chloride (FeCl₃) as an oxidant in the presence of ultra fine grade powder of anatase TiO₂ nanoparticles cooled in an ice bath. The obtained nanocomposites were characterized by Fourier‐transform infrared (FTIR), thermogravimetric analysis (TGA), X‐ray diffraction (XRD), and scanning electron microscope (SEM) techniques. The obtained results showed that TiO₂ nanoparticles have been encapsulated by PPy with a strong effect on the morphology of PPy/TiO₂ nanocomposites. Also, the synthesized PPy/TiO₂ nanocomposites had higher thermal stability than that of pure PPy. The investigation of electrical conductivity of nanocomposites by four‐point probe instrument showed that the conductivity of nanocomposite at low TiO₂ content is much higher than of neat PPy, while with the increasing contents of TiO₂, the conductivity decreases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,characterization, and corrosion inhibition study of polyaniline‐α‐Fe2O3 nanocomposite

Polyaniline (PANI)‐α‐Fe₂O₃ nanocomposites (NCs) have been synthesized by chemical oxidative in situ polymerization of aniline in presence of α‐Fe₂O₃ nanoparticles at 5°C using (NH₄)₂S₂O₈ as an oxidant in an aqueous solution of sodium dodecylbenzene sulphonic acid (SDBS), as surfactant and dopant under N₂ atmosphere. The room temperature conductivity of NCs decreases and coercive force (H_c) increases with an increase addition of α‐Fe₂O₃ in PANI matrix. The result of FTIR and TGA shows that the interaction between α‐Fe₂O₃ particles and PANI matrix could improve the thermal stability of NCs. NCs demonstrate the superparamagnetic behavior. The performance of PANI and PANI‐α‐Fe₂O₃ NCs as protective coating, against corrosion of 316LN stainless steel in 3.5% NaCl was assessed by potentiodynamic polarization technique. The study shows a good corrosion inhibition effect of both the coatings. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of tanninsulfonic acid doped polyaniline–metal oxide nanocomposites

Composites of conducting polymers and metal oxides have a potential role in electronic devices because of their enhanced physical and electronic properties. An in situ synthesis of metal oxide nanocomposites of polyaniline (PANI) and tanninsulfonic acid doped PANI was carried out at ?10°C with two different ratios of aniline to sodium persulfate (oxidant) and the simultaneous incorporation of TiO₂, Al₂O₃, and ZnO nanopowders. The products were characterized by X‐ray diffraction (XRD), thermal analysis, spectroscopy, and electrical conductivity measurements. XRD and thermogravimetric analysis confirmed the presence of the metal oxide in the final product, whereas the spectroscopic characterization revealed interactions among the tannin, metal oxides, and PANI. The electrical properties were determined by four‐point‐probe bulk conductivity measurements. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Enhanced conductivity and fluorescence of polyaniline doped with Eu3+, Tb3+, and Y3+ ions

The doped polyaniline (PANI) with rare earth ions, which exhibits an increasing conductivity and strongly enhanced fluorescence emission, was prepared by dispersing PANI powder suspension in acetonitrile solution containing rare earth ions according to different mass ratios of rare earth ions to PANI at room temperature. The structure of the doped PANI was characterized by the spectra of FTIR, Raman, UV-vis, and XRD. Red-shifted change for the quinoid and benzenoid stretching vibration is observed in IR and Raman spectra after doping rare earth cations, and UV-vis absorption peak also presents a red-shift, indicating that the doped PANI possesses a better delocalization of electrons along the mainchain backbone. The experimental data show that the electrical and optical behaviors of PANI strongly depend on the species of rare earth cations and their concentration. It is found that enhancing fluorescence for the doped PANI is observed by comparing with emeraldine base (EB). Moreover, the conductivity of the protonated PANI samples doped with Eu³⁺, Tb³⁺, and Y³⁺ ions, increases from 2.1 × 10⁻⁴ to 3.33 S cm⁻¹, 1.50 × 10⁻¹ S cm⁻¹ and 2.26 × 10⁻¹ S cm⁻¹. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012