基于径向基函数与B样条的散乱数据拟合方法

针对散乱数据的曲面拟合问题,提出一种径向基函数与B样条插值结合使用的曲面拟合方法.通过分片径向基函数插值,三维散乱点,再从分片插值曲面上获取预先设定好的有序网格点的值,最后利用张量积B样条插值有序网格点,从而得到拟合曲面.该方法较好地解决散乱数据插值和拟合的计算不稳定性问题,最后给出算法实例.     

基于曲线和曲面控制的多边形物体变形反走样

基于参数曲线和曲面控制的空间变形是重要的几何外形编辑和柔性物体动画实现手段．当这两类变形方法的对象是多边形物体时,如何对变形物体进行重采样以得到高质量结果,是计算机动画和几何造型领域中的一个重要问题．该文针对B-样条曲线和曲面控制的空间变形方法,提出了面向多边形物体的空间变形反走样方法．在该方法中,利用等距技术将B-样条曲线或曲面所张成的变形空间近似表示为张量积B-样条参数体,结合作者提出的多边形物体精确B-样条自由变形方法,实现了参数曲线和曲面控制的多边形物体变形反走样．     

一种对称非均匀细分曲面算法

为了得到能更好应用于CAD系统的细分曲面造型方法,提出一种基于B-样条的对称非均匀细分算法,其中的思想和均匀Lane-Riesenfeld节点插入算法相似。基于B-样条的节点插入算法,以Blossoming为工具,计算出细分后的新控制顶点。细分后得到的极限曲面由张量积样条曲面组成,在奇异点达到2C连续。与传统的细分曲面算法相比,该细分曲面算法具有良好的局部支撑性,大大降低了算法的复杂度,而且该算法是对称的,不用考虑定向问题。     

用参数样条插值挖补方法进行大规模散乱数据曲面造型

利用矩形域中带连续边界条件的多元散乱数据最优插值方法，结合张量积型参数样条插值，从挖补的思想得到启发，提出一种适合大规模散乱数据曲面造型的参数样条插值挖补方法．用该方法构造的参数曲面内部C^m，n连续，挖补的矩形边界分别为C^m-10.和C^0,n-1连续．最后就常见的m=n=2时的双三次样条给出一些数值例子，说明该算法简单易行，效果良好．     

非矩形定义域上的散乱数据曲面重建的Multiquadric基函数拟合法

传统的Multiquadric基函数拟合散乱数据方法,只能用于定义域呈矩形拓扑的散乱数据集上,而逆向工程中通常遇到的是非矩形定义域上的散乱数据集,因此不能用传统方法。文章提出一种新的Multiquadric基函数拟合非矩形定义域上的散乱数据集。该方法首先找到一个与该散乱数据集所在曲面拓扑等价的参数曲面,通过将散乱数据点(xi,yi,zi)一一映射到此参数曲面,反求出其对应参数(ui,vi),由于(ui,vi)∈犤0,1犦×犤0,1犦,从而将非矩形定义域上的Multiquadric基函数拟合方法转化为传统的方法。将Multiquadric曲面与B-样条曲面进行了比较,指出了Multiquadric曲面优于B-样条曲面之处。     

基于SOM网络的三次B样条曲线重建

使用散乱点集重建曲线曲面,在逆向工程和计算机视觉中有着广泛的应用。提出基于SOM网络的三次B样条曲线重建算法。给定某一曲线散乱点集和一初始神经网络,优化SOM网络中神经元位置,使网络逼近散乱点和映射散乱点空间特征。用特征点反求三次B样条曲线控制点,利用控制点重建三次B样条曲线。试验结果表明,算法取得的曲线重建效果良好。     

密集散乱测量数据点的B样条曲面拟合研究

回顾了密集散乱数量数据点面拟合研究发展情况,针对异形边界自由曲面密集散乱测量数据点,提出一种B样条曲面多步拟合算法,其中涉及边界插值B样条曲面生成、Hardy′s双二次局部插值、规则网格数据点B样条曲面最小二乘拟合等关键技术,通过一个工程实例,对文中提出的B样条曲面多步拟合算法进行了实验验证。     

基于SOM的散乱数据点集的B样条曲面重建

利用自组织映射神经网络(SOM)技术对散乱数据点集进行B样条曲面重建时,往往存在网络学习时间过长和学习效果不理想等问题。提出了一种新的神经元初始化方法和分块学习算法,该算法首先运用主元素分析方法(PCA)对散乱数据进行分块,将拓扑结构为四边形的输出层神经元初始化在每块散乱数据的最小二乘平面上进行网络学习和训练,将分块学习得到的各网格曲面拼接成一个整体;然后对该整体网格曲面的边界和内部单独学习,得到一张逼近待重建曲面的双线性B样条曲面;最后对该B样条曲面误差进行了修正。实例证明,该算法可以明显地减少SOM网络学习时间,并改善网络学习效果。     

插值型三次样条及保形插值曲线曲面

为直接混合插值点,生成插值曲线和张量积型插值曲面,讨论了插值型样条函数.为生成保形插值曲线和曲面,分析了其不同于非插值曲线和曲面的凸包和保凸的具体含义.推导出三次C~1插值型样条函数公式,构造三次C~1插值样条曲线,给出了插值样条曲线的分段Bezier表示.所得三次插值曲线曲面具有几何不变性、凸包性质、局部可调性.讨论了插值曲线的保凸性质及关于插值数据点前后顺序的对称性.展示了具有和不具有保形性质插值曲线和张量积型插值曲面的实例.     

针对密集点云的快速曲面重建算法

为了能够快速地从高密度散乱点云生成三角形网格曲面,提出一种针对散乱点云的曲面重建算法.首先通过逐层外扩建立原始点云的近似网格曲面,然后对近似网格曲面进行二次剖分生成最终的精确曲面;为了能够处理噪声点云,在剖分过程中所有网格曲面顶点都通过层次B样条进行了优化.相比于其他曲面重建方法,该算法剖分速度快,且能够保证点云到所生成的三角网格曲面的距离小于预先设定容限.实验结果表明,文中算法能够有效地实现高密度散乱点云的三角剖分,且其剖分速度较已有算法有大幅提高.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.