Highly Surface‐roughened “Flower‐like” Silver Nanoparticles for Extremely Sensitive Substrates of Surface‐enhanced Raman Scattering

Surface‐enhanced Raman scattering (SERS) is a new optical spectroscopic analysis technique with potential for highly sensitive detection of molecules. Recently, many efforts have been made to find SERS substrates with high sensitivity and reproducibility. In this Research News article, we provide a focused review on the synthesis of monodispersed silver particles with a novel, highly roughened, “flower‐like” morphology by reducing silver nitrate with ascorbic acid in aqueous solutions. The nanometer‐scale surface roughness of the particles can provide several hot spots on a single particle, which significantly increases SERS enhancement. The incident polarization‐dependent SERS of individual particles is also studied. Although the different “hot spots” on a single particle can have a strong polarization dependency, the total Raman signals from an individual particle usually have no obvious polarization dependency. Moreover, these flower‐like silver particles can be measured by SERS with high enhancement several times, which indicates the high stability of the hot spots. Hence, the flower‐like silver particles here can serve as highly sensitive and reproducible SERS substrates.     

A SERS‐Assisted 3D Barcode Chip for High‐Throughput Biosensing

A surface enhanced Raman scattering (SERS)‐assisted 3D barcode chip has been developed for high‐throughput biosensing. The 3D barcode is realized through joint 2D spatial encoding with the Raman spectroscopic encoding, which stores the SERS fingerprint information in the format of a 2D array. Here, the concept of SERS‐assisted 3D barcode is demonstrated through multiplex immunoassay, where simultaneous detection of multiple targets in different samples has been achieved using a microfluidic platform. First, multiple proteins in different samples are spatially separated using a microfluidic patterned antibody barcode substrate, forming a 2D hybridization array. Then the SERS probes are used to identify and quantify the proteins. As different SERS probes are labeled with different Raman reporters, they could be employed as “SERS tags” to incorporate spectroscopic information into the 3D barcode. In this 3D barcode, the 2D spatial information helps to differentiate the samples and targets while the SERS information allows quantitative multiplex detection. It is found that the SERS‐assisted 3D barcode chip can not only accomplish one‐step multiplex detection within 30 min but also achieve an ultrasensitivity down to 10 fg mL^?1 (≈70 aM), which is expected to provide a promising tool for high‐throughput biomedical applications.     

Volume‐Enhanced Raman Scattering Detection of Viruses

Virus detection and analysis are of critical importance in biological fields and medicine. Surface‐enhanced Raman scattering (SERS) has shown great promise in small molecule and even single molecule detection, and can provide fingerprint signals of molecules. Despite the powerful detection capabilities of SERS, the size discrepancy between the SERS “hot spots” (generally, <10 nm) and viruses (usually, sub‐100 nm) yields poor detection reliability of viruses. Inspired by the concept of molecular imprinting, a volume‐enhanced Raman scattering (VERS) substrate composed of hollow nanocones at the bottom of microbowls (HNCMB) is developed. The hollow nanocones of the resulting VERS substrates serve a twofold purpose: 1) extending the region of Raman signal enhancement from the nanocone surface (e.g., surface “hot spots”) to the hollow area within the cone (e.g., volume “hot spots”)—a novel method of Raman signal enhancement, and 2) directing analyte such as viruses of a wide range of sizes to those VERS “hot spots” while simultaneously increasing the surface area contributing to SERS. Using HNCMB VERS substrates, greatly improved Raman signals of single viruses are demonstrated, an achievement with important implications in disease diagnostics and monitoring, biomedical fields, as well as in clinical treatment.     

Cover Picture: Metal–Silica Hybrid Nanostructures for Surface‐Enhanced Raman Spectroscopy (Adv. Mater. 21/2006)

The image shows an ordered array of silver‐tipped silica nanorods, which serve as a substrate for surface enhanced Raman spectroscopy (SERS). Signal intensities from test molecules in regions of aggregated pillars (indicated by the green laser beam) were enhanced by factors of 10 to 20 compared to arrays of separated pillars, as reported by Moskovits and co‐workers on p. 2829. This hybrid structure maximizes SERS signal intensities from analytes while minimizing the quantities needed for detection due to the precise formation of “hot regions” at the intersection of the silver tips.     

Ultrabroadband Metasurface for Efficient Light Trapping and Localization: A Universal Surface‐Enhanced Raman Spectroscopy Substrate for “All” Excitation Wavelengths

Most reported surface‐enhanced Raman spectroscopy (SERS) substrates can work for individual excitation wavelengths only. Therefore, different substrates have to be used for different excitation wavelengths, which consumes more biological/chemical materials, substrates, and measurement time. Here, an ultrabroadband super absorbing metasurface that can work as a universal substrate for low cost and high performance SERS sensing is reported. Due to broadband light trapping and localized field enhancement, this structure can work for almost “all” available laser lines from 450 to 1100 nm. This predicted feature is validated by SERS experiment using five different excitation laser lines, obtaining a high enhancement factor of 5.3 × 10⁷ and very good uniformity over large areas.     

High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.     

Pen‐on‐Paper Approach Toward the Design of Universal Surface Enhanced Raman Scattering Substrates

The translation of a technology from the laboratory into the real world should meet the demand of economic viability and operational simplicity. Inspired by recent advances in conductive ink pens for electronic devices on paper, we present a “pen‐on‐paper” approach for making surface enhanced Raman scattering (SERS) substrates. Through this approach, no professional training is required to create SERS arrays on paper using an ordinary fountain pen filled with plasmonic inks comprising metal nanoparticles of arbitrary shape and size. We demonstrate the use of plasmonic inks made of gold nanospheres, silver nanospheres and gold nanorods, to write SERS arrays that can be used with various excitation wavelengths. The strong SERS activity of these features allowed us to reach detection limits down to 10 attomoles of dye molecules in a sample volume of 10 μL, depending on the excitation wavelength, dye molecule and type of nanoparticles. Furthermore, such simple substrates were applied to pesticide detection down to 20 ppb. This universal approach offers portable, cost effective fabrication of efficient SERS substrates at the point of care. This approach should bring SERS closer to the real world through ink cartridges to be fixed to a pen to create plasmonic sensors at will.     

Tracking Drug‐Induced Epithelial–Mesenchymal Transition in Breast Cancer by a Microfluidic Surface‐Enhanced Raman Spectroscopy Immunoassay

Epithelial–mesenchymal transition (EMT) is a primary mechanism for cancer metastasis. Detecting the activation of EMT can potentially convey signs of metastasis to guide treatment management and improve patient survival. One of the classic signatures of EMT is characterized by dynamic changes in cellular expression levels of E‐cadherin and N‐cadherin, whose soluble active fragments have recently been reported to be biomarkers for cancer diagnosis and prognosis. Herein, a microfluidic immunoassay (termed “SERS immunoassay”) based on sensitive and simultaneous detection of soluble E‐cadherin (sE‐cadherin) and soluble N‐cadherin (sN‐cadherin) for EMT monitoring in patients' plasma is presented. The SERS immunoassay integrates in situ nanomixing and surface‐enhanced Raman scattering readout to enable accurate detection of sE‐cadherin and sN‐cadherin from as low as 10 cells mL^?1. This assay enables tracking of a concurrent decrease in sE‐cadherin and increase in sN‐cadherin in breast cancer cells undergoing drug‐induced mesenchymal transformation. The clinical potential of the SERS immunoassay is further demonstrated by successful detection of sE‐cadherin and sN‐cadherin in metastatic stage IV breast cancer patient plasma samples. The SERS immunoassay can potentially sense the activation of EMT to provide early indications of cancer invasions or metastasis.     

Correct Spectral Conversion between Surface‐Enhanced Raman and Plasmon Resonance Scattering from Nanoparticle Dimers for Single‐Molecule Detection

Simultaneous measurement of surface‐enhanced Raman scattering (SERS) and localized surface plasmon resonance (LSPR) in nanoparticle dimers presents outstanding opportunities in molecular identification and in the elucidation of physical properties, such as the size, distance, and deformation of target species. SERS–LSPR instrumentation exists and has been used under limited conditions, but the extraction of SERS and LSPR readouts from a single measurement is still a challenge. Herein, the extraction of LSPR spectra from SERS signals is reported and a tool for measuring the interparticle distance from Raman enhancement data by the standardization of the SERS signal is proposed. The SERS nanoruler mechanism incorporates two important aspects (the LSPR scattering peak shift and the Raman shift for measuring interparticle distance), and signifies their exact one‐to‐one correspondence after spectral correction. The developed methodology is applied to calculate the interparticle distance between nanoparticle dimers from SERS signals, to detect and quantify DNA at the single‐molecule level in a base‐pair‐specific manner. It is also shown that the SERS nanoruler concept can be used in structural analysis for the specific detection of the interaction of immunoglobulin G (IgG) with its target from bianalyte Raman signals with identical shaping at single‐molecule resolution. The SERS profile shaping approach not only offers a new detection mechanism for single molecules, but also has excellent potential for studying protein interactions and the intracellular detection of mRNA.     

Tape‐Imprinted Hierarchical Lotus Seedpod‐Like Arrays for Extraordinary Surface‐Enhanced Raman Spectroscopy

A novel two‐side‐activatable high‐performance surface‐enhanced Raman spectroscopy (SERS) substrate is developed based on the tape‐imprinting method. It features 3D full‐space‐distributed hot spots originating from the hierarchical lotus seedpod‐like silver arrays, which offer ultrasensitive, uniform, reproducible, and reliable quantitative measurements with an inherent internal standard. This excellent SERS substrate also holds great promise in practical in situ molecule detection on curved surfaces, such as pesticides on fruit, which is not yet possible with the traditional rigid or flexible material‐based SERS counterparts.     

Ag Nanoparticle‐Grafted PAN‐Nanohump Array Films with 3D High‐Density Hot Spots as Flexible and Reliable SERS Substrates

A facile fabrication approach of large‐scale flexible films is reported, with one surface side consisting of Ag‐nanoparticle (Ag‐NP) decorated polyacrylonitrile (PAN) nanohump (denoted as Ag‐NPs@PAN‐nanohump) arrays. This is achieved via molding PAN films with ordered nanohump arrays on one side and then sputtering much smaller Ag‐NPs onto each of the PAN‐nanohumps. Surface‐enhanced Raman scattering (SERS) activity of the Ag‐NPs@PAN‐nanohump array films can be improved by curving the flexible PAN film with ordered nanohump arrays during the Ag‐sputtering process to increase the density of the Ag‐NPs on the sidewalls of the PAN‐nanohumps. More 3D hot spots are thus achieved on a large‐scale. The Ag‐NPs@PAN‐nanohump array films show high SERS activity with good Raman signal reproducibility for Rhodamine 6G probe molecules. To trial their practical application, the Ag‐NPs@PAN‐nanohump array films are employed as SERS substrates for trace detection of trinitrotoluene and a congener of polychlorinated biphenyls. A lower detection limit of 10⁻¹²m and 10⁻⁵m can be achieved, respectively. Furthermore, the flexible Ag‐NPs@PAN‐nanohump array films can also be utilized as swabs to probe traces of methyl parathion on the surface of fruits such as apples. The as‐fabricated SERS substrates therefore have promising potential for applications in rapid safety inspection and environmental protection.     

Controlled Electrodeposition of Gold on Graphene: Maximization of the Defect‐Enhanced Raman Scattering Response

A reliable method to prepare a surface‐enhanced Raman scattering (SERS) active substrate is developed herein, by electrodeposition of gold nanoparticles (Au NPs) on defect‐engineered, large area chemical vapour deposition graphene (GR). A plasma treatment strategy is used in order to engineer the structural defects on the basal plane of large area single‐layer graphene. This defect‐engineered Au functionalized GR, offers reproducible SERS signals over the large area GR surface. The Raman data, along with X‐ray photoelectron spectroscopy and analysis of the water contact angle are used to rationalize the functionalization of the graphene layer. It is found that Au NPs functionalization of the “defect‐engineered” graphene substrates permits detection of concentrations as low as 10^?16 m for the probe molecule Rhodamine B, which offers an outstanding molecular sensing ability. Interestingly, a Raman signal enhancement of up to ≈10⁸ is achieved. Moreover, it is observed that GR effectively quenches the fluorescence background from the Au NPs and molecules due to the strong resonance energy transfer between Au NPs and GR. The results presented offer significant direction for the design and fabrication of ultra‐sensitive SERS platforms, and also open up possibilities for novel applications of defect engineered graphene in biosensors, catalysis, and optoelectronic devices.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.     

A Droplet‐Based High‐Throughput SERS Platform on a Droplet‐Guiding‐Track‐Engraved Superhydrophobic Substrate

A novel droplet‐based surface‐enhanced Raman scattering (SERS) sensor for high‐throughput real‐time SERS monitoring is presented. The developed sensors are based on a droplet‐guiding‐track‐engraved superhydrophobic substrate covered with hierarchical SERS‐active Ag dendrites. The droplet‐guiding track with a droplet stopper is designed to manipulate the movement of a droplet on the superhydrophobic substrate. The superhydrophobic Ag dendritic substrates are fabricated through a galvanic displacement reaction and subsequent self‐assembled monolayer coating. The optimal galvanic reaction time to fabricate a SERS‐active Ag dendritic substrate for effective SERS detection is determined, with the optimized substrate exhibiting an enhancement factor of 6.3 × 10⁵. The height of the droplet stopper is optimized to control droplet motion, including moving and stopping. Based on the manipulation of individual droplets, the optimized droplet‐based real‐time SERS sensor shows high resistance to surface contaminants, and droplets containing rhodamine 6G, Nile blue A, and malachite green are successively controlled and detected without spectral interference. This noble droplet‐based SERS sensor reduces sample preparation time to a few seconds and increased detection rate to 0.5 µ L s^?1 through the simple operation mechanism of the sensor. Accordingly, our sensor enables high‐throughput real‐time molecular detection of various target analytes for real‐time chemical and biological monitoring.     

Design of Magnetic‐Plasmonic Nanoparticle Assemblies via Interface Engineering of Plasmonic Shells for Targeted Cancer Cell Imaging and Separation

Magnetic‐plasmonic nanoparticles have received considerable attention for widespread applications. These nanoparticles (NPs) exhibiting surface‐enhanced Raman scattering (SERS) activities are developed due to their potential in bio‐sensing applicable in non‐destructive and sensitive analysis with target‐specific separation. However, it is challenging to synthesize these NPs that simultaneously exhibit low remanence, maximized magnetic content, plasmonic coverage with abundant hotspots, and structural uniformity. Here, a method that involves the conjugation of a magnetic template with gold seeds via chemical binding and seed‐mediated growth is proposed, with the objective of obtaining plasmonic nanostructures with abundant hotspots on a magnetic template. To obtain a clean surface for directly functionalizing ligands and enhancing the Raman intensity, an additional growth step of gold (Au) and/or silver (Ag) atoms is proposed after modifying the Raman molecules on the as‐prepared magnetic‐plasmonic nanoparticles. Importantly, one‐sided silver growth occurred in an environment where gold facets are blocked by Raman molecules; otherwise, the gold growth is layer‐by‐layer. Moreover, simultaneous reduction by gold and silver ions allowed for the formation of a uniform bimetallic layer. The enhancement factor of the nanoparticles with a bimetallic layer is approximately 10⁷. The SERS probes functionalized cyclic peptides are employed for targeted cancer‐cell imaging and separation.     

Single‐Molecule Electrical Biosensors Based on Single‐Walled Carbon Nanotubes

Interactions between biological molecules are fundamental to biology. Probing the complex behaviors of biological systems at the molecular level provides new opportunities to uncover the wealth of molecular information that is usually hidden in conventional ensemble experiments and address the “unanswerable” questions in the physical, chemical and biological sciences. Nanometer‐scale materials are particularly well matched with biomolecular interactions due to their biocompatibility, size comparability, and remarkable electrical properties, thus setting the basis for biological sensing with ultrahigh sensitivity. This brief review aims to highlight the recent progress of the burgeoning field of single‐molecule electrical biosensors based on nanomaterials, with a particular focus on single‐walled carbon nanotubes (SWNTs), for better understanding of the molecular structure, interacting dynamics, and molecular functions. The perspectives and key issues that will be critical to the success of next‐generation single‐molecule biosensors toward practical applications are also discussed, such as the device reproducibility, system integration, and theoretical simulation.     

First‐Layer Effect in Graphene‐Enhanced Raman Scattering

Graphene as a substrate for enhancing Raman scattering, called graphene‐enhanced Raman scattering (GERS), has been reported in previous work. Herein, it is found that the “first‐layer effect”, which is widely used to explain the chemical‐enhanced mechanism in surface‐enhanced Raman scattering (SERS), exists in the GERS system. The Langmuir–Blodgett (LB) technique is used to construct mono‐ and multilayer ordered aggregates of protoporphyrin IX (PPP). Raman spectra of PPP with different layer numbers of the LB film on graphene are collected. The Raman signal from the first monolayer LB film of PPP has a larger contribution to the Raman enhancement than that from subsequent monolayers. Meanwhile, the Raman enhancement is dependent on the molecular configuration in contact with graphene, in which the functional group of PPP in direct contact with graphene has a stronger enhancement than other groups. These results reveal that GERS is strongly dependent on the distance between graphene and the molecule, which is convincing evidence that the Raman enhancement effect based on graphene belongs to the chemical‐enhanced mechanism. This discovery provides a convenient system for the study of the chemical‐enhanced mechanism and will benefit further understanding of SERS.     

Microfluidic Surface‐Enhanced Raman Scattering Sensors Based on Nanopillar Forests Realized by an Oxygen‐Plasma‐Stripping‐of‐Photoresist Technique

A novel surface‐enhanced Raman scattering (SERS) sensor is developed for real‐time and highly repeatable detection of trace chemical and biological indicators. The sensor consists of a polydimethylsiloxane (PDMS) microchannel cap and a nanopillar forest‐based open SERS‐active substrate. The nanopillar forests are fabricated based on a new oxygen‐plasma‐stripping‐of‐photoresist technique. The enhancement factor (EF) of the SERS‐active substrate reaches 6.06 × 10⁶, and the EF of the SERS sensor is about 4 times lower due to the influence of the PDMS cap. However, the sensor shows much higher measurement repeatability than the open substrate, and it reduces the sample preparation time from several hours to a few minutes, which makes the device more reliable and facile for trace chemical and biological analysis.     

Plasmonic‐Nanopore Biosensors for Superior Single‐Molecule Detection

Plasmonic and nanopore sensors have separately received much attention for achieving single‐molecule precision. A plasmonic “hotspot” confines and enhances optical excitation at the nanometer length scale sufficient to optically detect surface–analyte interactions. A nanopore biosensor actively funnels and threads analytes through a molecular‐scale aperture, wherein they are interrogated by electrical or optical means. Recently, solid‐state plasmonic and nanopore structures have been integrated within monolithic devices that address fundamental challenges in each of the individual sensing methods and offer complimentary improvements in overall single‐molecule sensitivity, detection rates, dwell time and scalability. Here, the physical phenomena and sensing principles of plasmonic and nanopore sensing are summarized to highlight the novel complementarity in dovetailing these techniques for vastly improved single‐molecule sensing. A literature review of recent plasmonic nanopore devices is then presented to delineate methods for solid‐state fabrication of a range of hybrid device formats, evaluate the progress and challenges in the detection of unlabeled and labeled analyte, and assess the impact and utility of localized plasmonic heating. Finally, future directions and applications inspired by the present state of the art are discussed.