带相反电荷疏水缔合聚合物之间协同效应的研究

通过自由基聚合合成了丙烯酰胺(AM)/丙烯酸钠(Na AA)/十六烷基二甲基烯丙基氯化铵(C16-DMAAC)的共聚物AP,丙烯酰胺(AM)/甲基丙烯酰氧乙基三甲基氯化铵(DMC)/C16DMAAC的共聚物DP,并通过红外光谱与1H-NMR对聚合物的结构进行了表征.同时,在10000 mg/L的Na Cl溶液中,将聚合物AP和DP混合后得到复合溶液,通过黏度、流变及荧光测试探究了2种带相反电荷聚合物之间的协同效应及机理.表观黏度测试表明,当AP与DP的质量比为7∶3时,复合溶液的表观黏度远高于AP和DP溶液的表观黏度,说明聚合物之间产生了显著的协同效应.当p H=6~8时,聚合物AP和DP溶液之间的协同效应较强.当聚合物浓度为2000 mg/L,Na Cl浓度为15000 mg/L时,AP和DP的表观黏度分别为19.9、4.2 m Pa·s,而复合溶液的表观黏度高达370.2 m Pa·s,表现出较强的抗盐性能.对比复合溶液与单一聚合物溶液的平台区模量(G0)和特征松弛时间(TR),发现复合溶液缔合点的密度和强度都高于单一聚合物溶液;对比复合溶液及单一聚合物溶液的I3/I1和Ie/Im值,发现复合溶液疏水微区数量高于单一聚合物溶液.     

小角X光散射表征分散液中Nafion的微观结构

利用小角X光散射研究了全氟磺酸离子聚合物Nafion膜在不同比例的氮甲基甲酰胺和正丁醇混合溶剂中分散形成分散液的微观结构。 研究表明,主链刚性和主-侧链亲疏水性的协同作用使分散液中的Nafion呈典型的棒状胶束结构。 胶束的等效回转半径(R_g)对Nafion质量浓度表现出-0.42的标度,与聚电解质在无盐溶剂中的理论标度一致;而胶束间相关长度对Nafion质量浓度表现出-0.13的标度,与典型的中性聚合物溶液理论标度一致。 极性低的正丁醇促进Nafion主链溶剂化并利于长胶束形成,而极性高的氮甲基甲酰胺则能促进Nafion分散。 该研究将为理解Nafion分散液的性质以及湿法制备Nafion膜的微结构形成提供清晰指导。     

关于聚电解质浓溶液的粘度-浓度幂律方程中指数(α)的探讨

在含有0.07 mol NaNO_3外加盐和无外加盐的二甲基甲酰胺/甲苯(体积比:3/1)的两类混合溶剂中,采用RN50-1型落球粘度仪研究了不同磺化度(IEC=0～0.93mmol/g)的磺化聚砜(S-PSF)浓溶液的零剪切粘度(η)-浓度(C)的幂律关系式,η=K·C~α。实验结果显示:磺化度不同的试样在舍有外加盐溶剂中的指数(α=4.29～3.52)值均分别大于无外加盐溶剂中的指数(α=4.09～3.03)值,且它们都随试样磺化度的增加而下降。文中,应用标度的分析方法对浓度指数(α)的变化规律作了解释。     

间位聚亚吡啶基亚乙炔基共轭聚电解质的合成与溶液光物理性质

合成了单体1,4-双(3-磺酰化丙氧基)-2,5-二碘苯与2,6-二乙炔基吡啶,利用Heck-Sonogashira偶联反应制备了间位聚亚吡啶基亚乙炔基共轭聚电解质m-PPYPE-SO3Na,对单体以及聚合物进行了红外光谱与核磁氢谱表征.测试了该共轭聚电解质m-PPYPE-SO3Na的紫外-可见吸收光谱与荧光发射光谱.研究了该共轭聚电解质的溶液光物理性质,发现该聚电解质具有荧光发射的溶剂依赖性以及浓度依赖性,在水溶液中存在聚集.在聚合物溶液浓度为1×10-6mol/L左右时,聚集发射基本消失,说明此时在溶液中聚合物的聚集程度已经比较低.该聚电解质在水溶液中与表面活性剂之间存在一定的相互作用,加入非离子型高分子表面活性剂聚乙烯吡咯烷酮(PVP)的聚合物水溶液荧光显著增强,表明该表面活性剂破坏聚电解质的聚集.该共轭聚电解质的溶液光物理性质表明其具有成为水溶性荧光探针的应用潜力.     

疏水缔合聚合物分子量分布曲线的测定

在体积百分浓度为50%1,3-丙二醇、0.2 mol/L Na Cl和水溶剂条件下,消除疏水缔合聚合物(HAWSP)溶液中疏水缔合作用,屏蔽溶液中的聚电解质效应,使HAWSP分子在稀溶液中处于单分子分散状态.然后利用膜孔径分离原理,选择不同孔径的微孔滤膜,用微孔滤膜流动实验装置对疏水缔合聚合物进行分级,将不同分子量的聚合物分离开来.用二次方程拟合滤出液质量-过滤时间关系曲线得到各级分聚合物溶液的质量,以分光光度法测定各级分聚合物溶液的浓度,根据质量和浓度计算得到各级分的累积百分含量.结合静态光散射和毛细管法标定了疏水缔合聚合物Mark-Houwink方程[η]=0.182M~(0.586),用于准确测定疏水缔合聚合物各个级分的分子量.选择四参数方程曲线,根据各级分的分子量M和累积百分含量W,得到分子量的分布曲线.与动态光散射分析进行比较的结果表明,两种方法测试结果一致.     

阳离子表面活性剂R16HTAB及其复配体系的流变性能

用稳态和动态流变学方法研究了3-十六烷氧基-2-羟丙基三甲基溴化铵（R16HTAB）单纯以及水杨酸钠（NaSal）存在下溶液的流变特性．无盐体系中,在测定的浓度范围内,表面活性剂与零剪切黏度呈指数关系（η0∝c^2．53）．水杨酸钠的加入促进了体系由球状向蠕虫状胶束转化．Cox—Merz规则和Cole-Cole图证明,混合体系生成了蠕虫状胶束．与传统的CTAB比较,无论水杨酸钠存在与否,R16HTAB水溶液的流变性能均较好,这主要归因于羟丙基基团的插入,使得R16HTAB和NaSal分子之间形成氢键连接,生成了更加稳定的三维网络结构．应用冷冻蚀刻电子显微镜技术进一步证实了体系中蠕虫状胶柬的存在．     

聚二烯丙基甲基苄基氯化铵的合成及粘度行为

以甲胺、烯丙基氯、NaOH、氯化苄和偶氮二异丙基咪唑啉盐酸盐为原料,合成了聚二烯丙基甲基苄基氯化铵(PDAMABC),采用FT IR、1H NMR和元素分析对其结构进行表征,并考察了其在氯化钠、氯化钾、溴化钾、氯化钙、氯化镁、硫酸镁和硫酸钠溶液中的粘度行为。 将所得水相和低沸点馏分回用,二烯丙基甲基胺的收率从72.79%提高至83.41%;以水与乙醇为混合溶剂（V（H2O）∶V（C2H5OH）为1∶3~2∶3）,合成的二烯丙基甲基苄基氯化铵收率较高且水溶性好。 PDAMABC的比浓粘度随外加盐浓度增加而降低。 在0.1 mol/L NaCl溶液中,当其质量浓度低于0.031 25 g/L时,表现为聚电解质行为;质量浓度大于0.125 g/L时,表现为中性聚合物的粘度行为。 外加盐对比浓粘度的影响顺序为：Na2SO4＜NaCl＜KCl＜MgSO4＜MgCl2＜CaCl2＜KBr。 阴离子的屏蔽作用是导致比浓粘度降低的主要原因。     

不同浓度下NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法在298K时对1.33mol/L,2.71mol/L,4.14mol/L和5.12mol/L的NaCl水溶液的微观结构进行了研究。模拟发现浓度对离了近程水化结构的影响不大,浓溶液中Na^+,Cl^-之间有两种缔合方式,接触缔合离子对和溶剂分隔的缔合离子对。这表明在建立可适用于高浓度条件下的电解质溶液热力学模型时应考虑离子缔合的贡献。     

泥鳅体表黏液的流变行为

研究了无鳞鱼———泥鳅的体表黏液流变行为,发现黏液的稳态流动存在着3个不同区域:第一区域内,黏度随剪切速率(γ)变化不显著,呈现牛顿流动行为;第二区域内,随γ增大,黏度下降,呈现非牛顿行为;第三区域内,随γ继续增大,黏度又基本保持不变.黏液表观黏度(ηa)与γ的关系可用Carreau模型很好地拟合,其增比黏度(ηsp)与浓度(c)的关系为ηsp∝c1.5,表明黏液处于亚浓缠结区域.在测试频率(ω)范围内,黏液的动态储能模量(G′)大于动态损耗模量(G″),表明与黏性相比较,弹性占优,且G′及G″随ω变化不显著.存在一临界温度(35℃),当低于35℃时,黏液黏度随温度变化不显著,当高于35℃时,黏液变性,表现出不同的流变行为.     

磺化聚苯醚离聚体的合成及溶液性质研究

合成一系列磺化度的磺化PPO(S-PPO),以磺化度为20.9mol％的S-PPO的钠盐和锂盐为代表,研究其在四氢呋喃/甲醇混合溶剂中的离聚体行为。结果表明,S-PPO离聚体在溶液中的链聚集状态与聚合物浓度、反离子半径和温度密切相关。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.