Carbon Nanotubes Rooted in Porous Ternary Metal Sulfide@N/S‐Doped Carbon Dodecahedron: Bimetal‐Organic‐Frameworks Derivation and Electrochemical Application for High‐Capacity and Long‐Life Lithium‐Ion Batteries

Lithium ion battery is the predominant power source for portable electronic devices, electrical vehicles, and back‐up electricity storage units for clean and renewable energies. High‐capacity and long‐life electrode materials are essential for the next‐generation Li‐ion battery with high energy density. Here bimetal‐organic‐frameworks synthesis of Co_0.4Zn_0.19S@N and S codoped carbon dodecahedron is shown with rooted carbon nanotubes (Co‐Zn‐S@N‐S‐C‐CNT) for high‐performance Li‐ion battery application. Benefiting from the synergetic effect of two metal sulfide species for Li‐storage at different voltages, mesoporous dodecahedron structure, N and S codoped carbon overlayer and deep‐rooted CNTs network, the product exhibits a larger‐than‐theoretical reversible Li‐storage capacity of 941 mAh g^?1 after 250 cycles at 100 mA g^?1 and excellent high‐rate capability (734, 591, 505 mAh g^?1 after 500 cycles at large current densities of 1, 2, and 5 A g^?1 , respectively).     

Two Birds with One Stone: Metal–Organic Framework Derived Micro‐/Nanostructured Ni2P/Ni Hybrids Embedded in Porous Carbon for Electrocatalysis and Energy Storage

The construction of bifunctional electrode materials for hydrogen evolution reaction (HER) and lithium‐ion batteries (LIBs) has been a hot topic of research. Herein, metal–organic frameworks (MOFs) derived micro‐/nanostructured Ni₂P/Ni hybrids with a porous carbon coating (denoted as Ni₂P/Ni@C) are prepared using a feasible pyrolysis–phosphidation strategy. On the one hand, the optimal Ni₂P/Ni@C catalyst exhibits superior HER performance with a low overpotential of 149 mV versus a reversible hydrogen electrode (RHE) at 10 mA cm^?2 and excellent durability. The density functional theory computations verify that the strong synergistic effect between Ni₂P and Ni could optimize the electronic structure, thus rendering the enhanced electrocatalytic performance. On the other hand, the Ni₂P/Ni@C electrode displays a reversible capacity of 597 mAh g^?1 after 1000 cycles at 1000 mA g^?1 and improved rate capability as an anode for LIBs, owing to the well‐organized micro‐/nanostructure and conductive Ni core. In addition, the electrochemical reaction mechanism of the Ni₂P/Ni@C electrode upon lithiation/delithiation is investigated in detail via ex situ X‐ray powder diffraction and X‐ray photoelectron spectroscopy methods. It is expected that the facile and controllable approach can be extended to fabricate other MOF‐based metal phosphides/metal hybrids for electrochemical energy storage and conversion systems.     

Metal–Organic Framework (MOF) Derived Electrodes with Robust and Fast Lithium Storage for Li‐Ion Hybrid Capacitors

Hybrid metal–organic frameworks (MOFs) demonstrate great promise as ideal electrode materials for energy‐related applications. Herein, a well‐organized interleaved composite of graphene‐like nanosheets embedded with MnO₂ nanoparticles (MnO₂@C‐NS) using a manganese‐based MOF and employed as a promising anode material for Li‐ion hybrid capacitor (LIHC) is engineered. This unique hybrid architecture shows intriguing electrochemical properties including high reversible specific capacity 1054 mAh g^?1 (close to the theoretical capacity of MnO₂, 1232 mAh g^?1) at 0.1 A g^?1 with remarkable rate capability and cyclic stability (90% over 1000 cycles). Such a remarkable performance may be assigned to the hierarchical porous ultrathin carbon nanosheets and tightly attached MnO₂ nanoparticles, which provide structural stability and low contact resistance during repetitive lithiation/delithiation processes. Moreover, a novel LIHC is assembled using a MnO₂@C‐NS anode and MOF derived ultrathin nanoporous carbon nanosheets (derived from other potassium‐based MOFs) cathode materials. The LIHC full‐cell delivers an ultrahigh specific energy of 166 Wh kg^?1 at 550 W kg^?1 and maintained to 49.2 Wh kg^?1 even at high specific power of 3.5 kW kg^?1 as well as long cycling stability (91% over 5000 cycles). This work opens new opportunities for designing advanced MOF derived electrodes for next‐generation energy storage devices.     

A General Metal‐Organic Framework (MOF)‐Derived Selenidation Strategy for In Situ Carbon‐Encapsulated Metal Selenides as High‐Rate Anodes for Na‐Ion Batteries

On account of increasing demand for energy storage devices, sodium‐ion batteries (SIBs) with abundant reserve, low cost, and similar electrochemical properties have the potential to partly replace the commercial lithium‐ion batteries. In this study, a facile metal‐organic framework (MOF)‐derived selenidation strategy to synthesize in situ carbon‐encapsulated selenides as superior anode for SIBs is rationally designed. These selenides with particular micro‐ and nanostructured features deliver ultrastable cycling performance at high charge–discharge rate and demonstrate ultraexcellent rate capability. For example, the uniform peapod‐like Fe₇Se₈@C nanorods represent a high specific capacity of 218 mAh g^?1 after 500 cycles at 3 A g^?1 and the porous NiSe@C spheres display a high specific capacity of 160 mAh g^?1 after 2000 cycles at 3 A g^?1. The current simple MOF‐derived method could be a promising strategy for boosting the development of new functional inorganic materials for energy storage, catalysis, and sensors.     

Adiponitrile (C6H8N2): A New Bi‐Functional Additive for High‐Performance Li‐Metal Batteries

Rechargeable batteries with a Li metal anode and Ni‐rich Li[Ni_xCo_yMn_1?x?y]O₂ cathode (Li/Ni‐rich NCM battery) have been emerging as promising energy storage devices because of their high‐energy density. However, Li/Ni‐rich NCM batteries have been plagued by the issue of the thermodynamic instability of the Li metal anode and aggressive surface chemistry of the Ni‐rich cathode against electrolyte solution. In this study, a bi‐functional additive, adiponitrile (C₆H₈N₂), is proposed which can effectively stabilize both the Li metal anode and Ni‐rich NCM cathode interfaces. In the Li/Ni‐rich NCM battery, the addition of 1 wt% adiponitrile in 0.8 m LiTFSI + 0.2 M LiDFOB + 0.05 M LiPF₆ dissolved in EMC/FEC = 3:1 electrolyte helps to produce a conductive and robust Li anode/electrolyte interface, while strong coordination between Ni⁴⁺ on the delithiated Ni‐rich cathode and nitrile group in adiponitrile reduces parasitic reactions between the electrolyte and Ni‐rich cathode surface. Therefore, upon using 1 wt% adiponitrile, the Li/full concentration gradient Li[Ni_0.73Co_0.10Mn_0.15Al_0.02]O₂ battery achieves an unprecedented cycle retention of 75% over 830 cycles under high‐capacity loading of 1.8 mAh cm^?2 and fast charge–discharge time of 2 h. This work marks an important step in the development of high‐performance Li/Ni‐rich NCM batteries with efficient electrolyte additives.     

A High‐Energy Li‐Ion Battery Using a Silicon‐Based Anode and a Nano‐Structured Layered Composite Cathode

High capacity electrodes based on a Si composite anode and a layered composite oxide cathode, Ni‐rich Li[Ni_0.75Co_0.1Mn_0.15]O₂, are evaluated and combined to fabricate a high energy lithium ion battery. The Si composite anode, Si/C‐IWGS (internally wired with graphene sheets), is prepared by a scalable sol–gel process. The Si/C‐IWGS anode delivers a high capacity of >800 mAh g^?1 with an excellent cycling stability of up to 200 cycles, mainly due to the small amount of graphene (～6 wt%). The cathode (Li[Ni_0.75Co_0.1Mn_0.15]O₂) is structurally optimized (Ni‐rich core and a Ni‐depleted shell with a continuous concentration gradient between the core and shell, i.e., a full concentration gradient, FCG, cathode) so as to deliver a high capacity (>200 mAh g^?1) with excellent stability at high voltage (～4.3 V). A novel lithium ion battery system based on the Si/C‐IWGS anode and FCG cathode successfully demonstrates a high energy density (240 Wh kg^?1 at least) as well as an unprecedented excellent cycling stability of up to 750 cycles between 2.7 and 4.2 V at 1C. As a result, the novel battery system is an attractive candidate for energy storage applications demanding a high energy density and long cycle life.     

Watermelon‐Like Structured SiOx–TiO2@C Nanocomposite as a High‐Performance Lithium‐Ion Battery Anode

A unique watermelon‐like structured SiO_x–TiO₂@C nanocomposite is synthesized by a scalable sol–gel method combined with carbon coating process. Ultrafine TiO₂ nanocrystals are uniformly embedded inside SiO_x particles, forming SiO_x–TiO₂ dual‐phase cores, which are coated with outer carbon shells. The incorporation of TiO₂ component can effectively enhance the electronic and lithium ionic conductivities inside the SiO_x particles, release the structure stress caused by alloying/dealloying of Si component and maximize the capacity utilization by modifying the Si–O bond feature and decreasing the O/Si ratio (x‐value). The synergetic combination of these advantages enables the synthesized SiO_x–TiO₂@C nanocomposite to have excellent electrochemical performances, including high specific capacity, excellent rate capability, and stable long‐term cycleability. A stable specific capacity of ≈910 mAh g^?1 is achieved after 200 cycles at the current density of 0.1 A g^?1 and ≈700 mAh g^?1 at 1 A g^?1 for over 600 cycles. These results suggest a great promise of the proposed particle architecture, which may have potential applications in the improvement of various energy storage materials.     

General Synthesis of Dual Carbon‐Confined Metal Sulfides Quantum Dots Toward High‐Performance Anodes for Sodium‐Ion Batteries

Sponge‐like composites assembled by cobalt sulfides quantum dots (Co₉S₈ QD), mesoporous hollow carbon polyhedral (HCP) matrix, and a reduced graphene oxide (rGO) wrapping sheets are synthesized by a simultaneous thermal reduction, carbonization, and sulfidation of zeolitic imidazolate frameworks@GO precursors. Specifically, Co₉S₈ QD with size less than 4 nm are homogenously embedded within HCP matrix, which is encapsulated in macroporous rGO, thereby leading to the double carbon‐confined hierarchical composites with strong coupling effect. Experimental data combined with density functional theory calculations reveal that the presence of coupled rGO not only prevents the aggregation and excessive growth of particles, but also expands the lattice parameters of Co₉S₈ crystals, enhancing the reactivity for sodium storage. Benefiting from the hierarchical porosity, conductive network, structural integrity, and a synergistic effect of the components, the sponge‐like composites used as binder‐free anodes manifest outstanding sodium‐storage performance in terms of excellent stable capacity (628 mAh g^?1 after 500 cycles at 300 mA g^?1) and exceptional rate capability (529, 448, and 330 mAh g^?1 at 1600, 3200, and 6400 mA g^?1). More importantly, the synthetic method is very versatile and can be easily extended to fabricate other transition‐metal‐sulfides‐based sponge‐like composites with excellent electrochemical performances.     

Shape‐Assisted 2D MOF/Graphene Derived Hybrids as Exceptional Lithium‐Ion Battery Electrodes

Herein, a novel polymer‐templated strategy is described to obtain 2D nickel‐based MOF nanosheets using Ni(OH)₂, squaric acid, and polyvinylpyrrolidone (PVP), where PVP has a dual role as a structure‐directing agent, as well as preventing agglomeration of the MOF nanosheets. Furthermore, a scalable method is developed to transform the 2D MOF sheets to Ni₇S₆/graphene nanosheet (GNS) heterobilayers by in situ sulfidation using thiourea as a sulfur source. The Ni₇S₆/GNS composite shows an excellent reversible capacity of 1010 mAh g^?1 at 0.12 A g^?1 with a Coulombic efficiency of 98% capacity retention. The electrochemical performance of the Ni₇S₆/GNS composite is superior not only to nickel sulfide/graphene‐based composites but also to other metal disulfide–based composite electrodes. Moreover, the Ni₇S₆/GNS anode exhibits excellent cycle stability (≈95% capacity retention after 2000 cycles). This outstanding electrochemical performance can be attributed to the synergistic effects of Ni₇S₆ and GNS, where GNS serves as a conducting matrix to support Ni₇S₆ nanosheets while Ni₇S₆ prevents restacking of GNS. This work opens up new opportunities in the design of novel functional heterostructures by hybridizing 2D MOF nanosheets with other 2D nanomaterials for electrochemical energy storage/conversion applications.     

Optimization of Von Mises Stress Distribution in Mesoporous α‐Fe2O3/C Hollow Bowls Synergistically Boosts Gravimetric/Volumetric Capacity and High‐Rate Stability in Alkali‐Ion Batteries

Hollow structures are often used to relieve the intrinsic strain on metal oxide electrodes in alkali‐ion batteries. Nevertheless, one common drawback is that the large interior space leads to low volumetric energy density and inferior electric conductivity. Here, the von Mises stress distribution on a mesoporous hollow bowl (HB) is simulated via the finite element method, and the vital role of the porous HB structure on strain‐relaxation behavior is confirmed. Then, N‐doped‐C coated mesoporous α‐Fe₂O₃ HBs are designed and synthesized using a multistep soft/hard‐templating strategy. The material has several advantages: (i) there is space to accommodate strains without sacrificing volumetric energy density, unlike with hollow spheres; (ii) the mesoporous hollow structure shortens ion diffusion lengths and allows for high‐rate induced lithiation reactivation; and (iii) the N‐doped carbon nanolayer can enhance conductivity. As an anode in lithium‐ion batteries, the material exhibits a very high reversible capacity of 1452 mAh g^?1 at 0.1 A g^?1, excellent cycling stability of 1600 cycles (964 mAh g^?1 at 2 A g^?1), and outstanding rate performance (609 mAh g^?1 at 8 A g^?1). Notably, the volumetric specific capacity of composite electrode is 42% greater than that of hollow spheres. When used in potassium‐ion batteries, the material also shows high capacity and cycle stability.     

Facile Spraying Synthesis and High‐Performance Sodium Storage of Mesoporous MoS2/C Microspheres

A facile one‐step spraying synthesis of MoS₂/C microspheres and their enhanced electrochemical performance as anode of sodium‐ion batteries is reported. An aerosol spraying pyrolysis without any template is employed to synthesize MoS₂/C microspheres, in which ultrathin MoS₂ nanosheets (≈2 nm) with enlarged interlayers (≈0.64 nm) are homogeneously embedded in mesoporous carbon microspheres. The as‐synthesized mesoporous MoS₂/C microspheres with 31 wt% carbon have been applied as an anode material for sodium ion batteries, demonstrating long cycling stability (390 mAh g^?1 after 2500 cycles at 1.0 A g^?1) and high rate capability (312 mAh g^?1 at 10.0 A g^?1 and 244 mAh g^?1 at 20.0 A g^?1). The superior electrochemical performance is due to the uniform distribution of ultrathin MoS₂ nanosheets in mesoporous carbon frameworks. This kind of structure not only effectively improves the electronic and ionic transport through MoS₂/C microspheres, but also minimizes the influence of pulverization and aggregation of MoS₂ nanosheets during repeated sodiation and desodiation.     

Fe3O4 Nanoparticles Embedded in Uniform Mesoporous Carbon Spheres for Superior High‐Rate Battery Applications

Robust composite structures consisting of Fe₃O₄ nanoparticles (～5 nm) embedded in mesoporous carbon spheres with an average size of about 70 nm (IONP@mC) are synthesized by a facile two‐step method: uniform Fe₃O₄ nanoparticles are first synthesized followed by a post‐synthetic low‐temperature hydrothermal step to encapsulate them in mesoporous carbon spheres. Instead of graphene which has been extensively reported for use in high‐rate battery applications as a carbonaceous material combined with metal oxides mesoporous carbon is chosen to enhance the overall performances. The interconnecting pores facilitate the penetration of electrolyte leading to direct contact between electrochemically active Fe₃O₄ and lithium ion‐carrying electrolyte greatly facilitating lithium ion transportation. The interconnecting carbon framework provides continuous 3D electron transportation routes. The anodes fabricated from IONP@mC are cycled under high current densities ranging from 500 to 10 000 mA g^?1. A high reversible capacity of 271 mAh g^?1 is reached at 10 000 mAh g^?1 demonstrating its superior high rate performance.     

Hollow Mesoporous Carbon Nanocubes: Rigid‐Interface‐Induced Outward Contraction of Metal‐Organic Frameworks

Novel carbon materials derived from metal‐organic frameworks (MOFs) have attracted much attention, but the commonly inevitable inward contraction during the carbonization process has restricted their structural variety and applications. In this work, a novel rigid‐interface induced outward contraction approach is reported for synthesizing hollow mesoporous carbon nanocubes (HMCNCs) by using ZIF‐8 nanocubes as precursors. HMCNCs exhibit a cubic morphology with the particle sizes slightly larger than ZIF‐8 nanocubes. Due to the unique outward contraction process, uniform carbon nanocubes with a hollow cavity, an outer microporous shell, and an inner mesoporous wall are simultaneously formed with a large pore size (25 nm), high surface area (1085.7 m² g^?1), high porosity (3.77 cm³ g^?1), and high nitrogen content (12.2%). When used as a cathode material for Li–SeS₂ batteries, the HMCNCs deliver a stable capacity of 812.6 mA h g^?1 at 0.2 A g^?1 after 100 cycles and an outstanding rate capability (455.1 mA h g^?1 at 5.0 A g^?1). The findings may pave the way for the construction of distinctive MOF‐derived carbon materials for various applications.     

A High‐Performance Binary Ni–Co Hydroxide‐based Water Oxidation Electrode with Three‐Dimensional Coaxial Nanotube Array Structure

Developing nanostructured Ni and Co oxides with a small overpotential and fast kinetics of the oxygen evolution reaction (OER) have drawn considerable attention recently because their theoretically high efficiency, high abundance, low cost, and environmental benignity in comparison with precious metal oxides, such as RuO₂ and IrO₂. However, how to increase the specific activity area and improve their poor intrinsic conductivity is still challenging, which significantly limits the overall OER rate and largely prevent their utilization. Thus, developing effective OER electrocatalysts with abundant active sites and high electrical conductivity still remains urgent. In this work, a scrupulous design of OER electrode with a unique sandwich‐like coaxial structure of the three‐dimensional Ni@[Ni^(2+/3+)Co₂(OH)_6–7]_x nanotube arrays (3D NNCNTAs) is reported. A Ni nanotube array with open end is homogeneous coated with Ni and Co co‐hydroxide nanosheets ([Ni^(2+/3+)Co₂(OH)_6–7]_x) and is employed as multifunctional interlayer to provide a large surface area and fast electron transport and support the outermost [Ni^(2+/3+)Co₂(OH)_6–7]_x layer. The remarkable features of high surface area, enhanced electron transport, and synergistic effects have greatly assured excellent OER activity with a small overpotential of 0.46 V at the current density of 10 mA cm^?2 and high stability.     

Ultrathin Layered Hydroxide Cobalt Acetate Nanoplates Face‐to‐Face Anchored to Graphene Nanosheets for High‐Efficiency Lithium Storage

The dramatically increasing demand of high‐energy lithium‐ion batteries (LIBs) urgently requires advanced substitution for graphite‐based anodes. Herein, inspired from the extra capacity of lithium storage in solid‐electrolyte interface (SEI) films, layered hydroxide cobalt acetates (LHCA, Co(Ac)_0.48(OH)_1.52·0.55H₂O) are introduced as novel and high‐efficiency anode materials. Furthermore, ultrathin LHCA nanoplates are face‐to‐face anchored on the surface of graphene nanosheets (GNS) through a facile solvothermal method to improve the electronic transport and avoid agglomeration during repeated cycles. Profiting from the parallel structure, LHCA//GNS nanosheets exhibit extraordinary long‐term and high‐rate performance. At the current densities of 1000 and 4000 mA g^?1, the reversible capacities maintain ≈1050 mAh g^?1 after 200 cycles and ≈780 mAh g^?1 after 300 cycles, respectively, much higher than the theoretical value of LHCA according to the conversion mechanism. Fourier transform infrared spectroscopy confirms the conversion from acetate to acetaldehyde after lithiation. A reasonable mechanism is proposed to elucidate the lithium storage behaviors referring to the electrocatalytic conversion of OH groups with Co nanocatalysts. This work can help further understand the contribution of SEI components (especially LiOH and LiAc) to lithium storage. It is envisaged that layered transition metal hydroxides can be used as advanced materials for energy storage devices.     

Electronic Structure Regulation of Layered Vanadium Oxide via Interlayer Doping Strategy toward Superior High‐Rate and Low‐Temperature Zinc‐Ion Batteries

Currently, development of suitable cathode materials for zinc‐ion batteries (ZIBs) is plagued by the sluggish kinetics of Zn²⁺ with multivalent charge in the host structure. Herein, it is demonstrated that interlayer Mn²⁺‐doped layered vanadium oxide (Mn_0.15V₂O₅·nH₂O) composites with narrowed direct bandgap manifest greatly boosted electrochemical performance as zinc‐ion battery cathodes. Specifically, the Mn_0.15V₂O₅·nH₂O electrode shows a high specific capacity of 367 mAh g^?1 at a current density of 0.1 A g^?1 as well as excellent retentive capacities of 153 and 122 mAh g^?1 after 8000 cycles at high current densities up to 10 and 20 A g^?1, respectively. Even at a low temperature of ?20 °C, a reversible specific capacity of 100 mAh g^?1 can be achieved at a current density of 2.0 A g^?1 after 3000 cycles. The superior electrochemical performance originates from the synergistic effects between the layered nanostructures and interlayer doping of Mn²⁺ ions and water molecules, which can enhance the electrons/ions transport kinetics and structural stability during cycling. With the aid of various ex situ characterization technologies and density functional theory calculations, the zinc‐ion storage mechanism can be revealed, which provides fundamental guidelines for developing high‐performance cathodes for ZIBs.     

Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

An Integrated Free‐Standing Flexible Electrode with Holey‐Structured 2D Bimetallic Phosphide Nanosheets for Sodium‐Ion Batteries

An integrated, free‐standing, and binder‐free type of flexible anode electrode is fabricated from numerous holey‐structured, 2D nickel‐based phosphide nanosheets connected with carbon nanotubes. This electrode architecture can not only uniformly disperse the nanosheets throughout the whole electrode to avoid aggregation or detachment, but also provide an ideal sodium ion and electrolyte diffusion and penetration network with high electronic conductivity. Meanwhile, bimetallic phosphide formation by introducing secondary metal species will lead to a synergistic effect to modify the electrochemical properties. Due to the excellent compositional and structural characteristics of this electrode, it delivers superior performance. This designed flexible anode with Ni_1.5Co_0.5P_x nanosheets demonstrates a reversible capacity of 496.4 mAh g^?1 at 0.5 C and a good rate capacity of 276.1 mAh g^?1 at 8 C. Meanwhile, this connected integrated network woven from carbon nanotubes can effectively restrain volumetric expansion and shrinkage, and affect the conversion reaction products formation as well, from large‐sized microspheres to film structure, which is primarily credited with the improvement in electrochemical performance. This work may open up a new path for the synthesis of morphology‐controlled phosphides and promote the further development of flexible devices.     

Advanced Concentration Gradient Cathode Material with Two‐Slope for High‐Energy and Safe Lithium Batteries

Li[Ni_0.65Co_0.13Mn_0.22]O₂ cathode with two‐sloped full concentration gradient (TSFCG), maximizing the Ni content in the inner part of the particle and the Mn content near the particle surface, is synthesized via a specially designed batch‐type reactor. The cathode delivers a discharge capacity of 200 mAh g^?1 (4.3 V cutoff) with excellent capacity retention of 88% after 1500 cycles in a full‐cell configuration. Overall electrochemical performance of the TSFCG cathode is benchmarked against conventional cathode (CC) with same composition and commercially available Li[Ni_0.8Co_0.15Al_0.05]O₂ (NCA). The TSFCG cathode exhibits the best cycling stability, rate capability, and thermal stability of the three electrodes. Transmission electron microscopy analysis of the cycled TSFCG, CC, and NCA cathodes shows that the TSFCG electrode maintains both its mechanical and structural integrity whereas the NCA electrode nearly pulverizes due to the strain during cycling.     

Topotactic Conversion Route to Mesoporous Quasi‐Single‐Crystalline Co3O4 Nanobelts with Optimizable Electrochemical Performance

The growth of mesoporous quasi‐single‐crystalline Co₃O₄ nanobelts by topotactic chemical transformation from α‐Co(OH)₂ nanobelts is realized. During the topotactic transformation process, the primary α‐Co(OH)₂ nanobelt frameworks can be preserved. The phases, crystal structures, morphologies, and growth behavior of both the precursory and resultant products are characterized by powder X‐ray diffraction (XRD), electron microscopy—scanning electron (SEM) and transmission electron (TEM) microscopy, and selected area electron diffraction (SAED). Detailed investigation of the formation mechanism of the porous Co₃O₄ nanobelts indicates topotactic nucleation and oriented growth of textured spinel Co₃O₄ nanowalls (nanoparticles) inside the nanobelts. Co₃O₄ nanocrystals prefer [0001] epitaxial growth direction of hexagonal α‐Co(OH)₂ nanobelts due to the structural matching of [0001] α‐Co(OH)₂//[111] Co₃O₄. The surface‐areas and pore sizes of the spinel Co₃O₄ products can be tuned through heat treatment of α‐Co(OH)₂ precursors at different temperatures. The galvanostatic cycling measurement of the Co₃O₄ products indicates that their charge–discharge performance can be optimized. In the voltage range of 0.0–3.0 V versus Li⁺/Li at 40 mA g^?1, reversible capacities of a sample consisting of mesoporous quasi‐single‐crystalline Co₃O₄ nanobelts can reach up to 1400 mA h g^?1, much larger than the theoretical capacity of bulk Co₃O₄ (892 mA h g^?1).