Extraction of propylbenzene or butylbenzene from dodecane using 4-methyl-N-butylpyridinium tetrafluoroborate, [mebupy][BF4], as an ionic liquid at different temperatures

Equilibrium tie line data have been determined for the two ternary liquid systems, namely {dodecane + propylbenzene + [mebupy][BF₄]} and {dodecane + butylbenzene + [mebupy][BF₄]} at temperatures (313, 323, and 333) K and atmospheric pressure. The effects of temperature and solvent to feed ratio upon solubility, selectivity, and distribution coefficient were investigated experimentally. The reliability of the experimental data was tested using the Othmer–Tobias correlation. The experimental results were regressed to estimate the interaction parameters between each of the three pairs of components for the UNIQUAC and the NRTL models as a function of temperature. In addition, the LLE data were also correlated with the UNIQUAC and NRTL models in a satisfactory manner.     

Evaluation of [bmim][PF6] as an ionic solvent for the extraction of propylbenzene from aliphatic compounds

The evaluation of using 1-butyl-3-methylimidazolium hexaflurophosphate ionic liquid, [bmim][PF₆], as a solvent for the extraction of propylbenzene from aliphatic compounds was studied. The (liquid + liquid) equilibrium (LLE) for two ternary systems comprising {dodecane or tetradecane + propylbenzene + [bmim][PF₆]} were analysed at atmospheric pressure and two temperatures, (313 and 333) K. The consistency of the experimental tie line data was ascertained by applying the Othmer–Tobias correlation. The effect of temperature, n-alkane chain length and solvent to feed ratio upon solubility, distribution ratio, selectivity, and per cent removal of the aromatic were investigated. The experimental LLE data were correlated using the UNIQAC and NRTL models for the activity coefficient with estimation of new interaction parameters, using the simplex minimization method and a composition based objective function. The calculated results from both methods are considered satisfactory.     

Separation of benzene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at several temperatures and atmospheric pressure: Effect of the size of the aliphatic hydrocarbons

The ionic liquid 1-ethyl-3-methylpyridinium ethylsulfate, [EMpy][ESO₄], was studied for the separation of benzene from aliphatic hydrocarbons (octane or nonane) by solvent extraction through the determination of the (liquid + liquid) equilibrium (LLE) of the ternary systems: {octane (1) + benzene (2) + [EMpy][ESO₄] (3)} and {nonane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. Binodal curves were determined using the “cloud point” method, and tie-line compositions were obtained by density measurements. The values of selectivity and distribution coefficient, derived from the tie-line data, were used to decide if this ionic liquid can be used as potential solvent for the separation of benzene from aliphatic hydrocarbons using liquid extraction. These results were analyzed and compared to those previously reported for the systems {hexane + benzene + [EMpy][ESO₄]} and {heptane + benzene + [EMpy][ESO₄]}. The experimental results show that this ionic liquid is suitable for the extraction of benzene from mixtures containing octane and nonane. The consistency of tie-line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL model. No literature data were found for the mixtures discussed in this paper.     

Ethanol extraction from its azeotropic mixture with hexane employing different ionic liquids as solvents

In this work, the ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMim][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [BMim][NTf₂], 1-butyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide, [BMpy][NTf₂], 1-butyl-3-methylpyridinium trifluoromethanesulfonate, [BMpy][TfO], have been investigated for their use as solvents in extraction processes for the ethanol removal from its azeotropic mixture with hexane. Therefore, the experimental determination of the liquid + liquid equilibrium for the ternary systems {hexane (1) + ethanol (2) + [EMim][NTf₂] (3)}, {hexane (1) + ethanol (2) + [BMim][NTf₂] (3)}, {hexane (1) + ethanol (2) + [BMpy][NTf₂] (3)} and {hexane (1) + ethanol (2) + [BMpy][TfO] (3)} was carried out at T = 298.15 K and atmospheric pressure. Classical parameters such as selectivity and solute distribution ratio, derived from the tie-line data, were calculated and afterwards, the structural influence of the ionic liquids on the extraction process was analyzed. Finally, the experimental LLE data were correlated by means of the NRTL and UNIQUAC models.     

(Liquid + liquid) equilibria for mixtures of dodecane and ethanol with alkylsulfate-based ionic liquids

The ternary (liquid + liquid) equilibrium (LLE) data for mixtures of dodecane (C₁₂H₂₆) and ethanol with ionic liquids 1,3-dimethylimidazolium methylsulfate [Mmim][MeSO₄], 1-ethyl-3-methylimidazolium methylsulfate, [Emim][MeSO₄] and 1-butyl-3-methylimidazolium methylsulfate, [Bmim][MeSO₄], were studied at T = 298.15 K and 0.101 MPa. The selectivity and solute distribution coefficient ratios determined from the data were used to examine the possibility of using these ionic liquids for extraction of ethanol from dodecane. The temperature dependency was investigated by measuring the LLE data for {dodecane + ethanol + [Mmim][MeSO₄]} at T = 313.15 K and 0.101 MPa. The Othmer–Tobias and Hand equations were used to test the consistency of the tie-line data. The tie-line data were correlated with the Non-Random Two Liquid (NRTL) equation which provided a good model and representation for the experimental results.     

Mixing and decomposition behavior of {[4bmpy][Tf2N] + [emim][EtSO4]} and {[4bmpy][Tf2N] + [emim][TFES]} ionic liquid mixtures

Mixing ionic liquids (ILs) has been revealed as a useful way to finely tune the properties of IL-based solvents. The scarce available studies on IL mixtures have shown a quasi-ideal behavior of their physical properties. In this work, we have performed a thermophysical characterization of two binary IL mixtures, namely {4-methyl-N-butylpyridinium bis(trifluoromethylsulfonyl)imide ([4bmpy][Tf₂N]) + 1-ethyl-3-methylimidazolium ethylsulfate ([emim][EtSO₄])} and {[4bmpy][Tf₂N] + 1-ethyl-3-methylimidazolium 1,1,2,2-tetrafluoroethanesulfonate [emim][TFES]}. Both binary IL mixtures have been recently proposed as promising solvents in the (liquid + liquid) extraction of aromatic hydrocarbons from mixtures with alkanes. Densities, viscosities, refractive indices, thermal stability, and specific heats of the {[4bmpy][Tf₂N] + [emim][EtSO₄]} and {[4bmpy][Tf₂N] + [emim][TFES]} IL mixtures have been measured as a function of both temperature and composition. Dynamic viscosities, refractive indices, and thermal stability of the {[4bmpy][Tf₂N] + [emim][EtSO₄]} mixture have exhibited strong deviations from the ideality, in contrast with the quasi-ideal properties of the {[4bmpy][Tf₂N] + [emim][TFES]} mixture and the behavior of the imidazolium and pyridinium-based IL mixtures studied hitherto. The reliability of predictive methods of the thermophysical properties of the mixtures has also been evaluated.     

Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4]

(Liquid + liquid) equilibrium (LLE) studies for the extraction of aromatics from alkanes present in the petroleum fractions are important to develop theoretical/semiempirical (liquid + liquid) equilibrium models, which are used in the design of extraction processes. In this work, the ionic liquid 1-ethyl-3-methylimidazolium methylsulfate, [EMim][MSO₄], was evaluated as potential solvent for the separation of toluene from heptane and cyclohexane. The LLE data for the quaternary system {heptane (1) + cyclohexane (2) + toluene (3) + [EMim][MSO₄] (4)} were experimentally determined at T = 298.15 K and atmospheric pressure. Moreover, the LLE data for the ternary systems {heptane or cyclohexane (1) + toluene (2) + [EMim][MSO₄] (3)} were also determined. Solute distribution ratios and selectivities were calculated and analysed in order to evaluate the capability of the ionic liquid to accomplish the separation target. A comparison between the solute distribution ratios and selectivities for the quaternary and the ternary systems was also made. Finally, the experimental tie-line data were correlated with the NRTL model.     

Effect of mono-, di- and tri-ethanolammonium tetrafluoroborate protonic ionic liquids on vapour liquid equilibria of ethanol aqueous solution

Vapour pressures were measured using a quasi-static ebulliometer for the binary mixture of (water + ethanol) containing one of three protonic ionic liquids (PIL), namely, mono-, di- or tri-ethanolammonium tetrafluoroborate, over the temperature range of (318.24 to 356.58) K at fixed PIL content of 0.30 in mass fraction. The vapour pressure data of the PIL-containing ternary systems were correlated using the NRTL equation with an overall root mean square deviation (RMSD) of 0.0092. The regressed NRTL parameters were used to predict the isobaric vapour liquid equilibria (VLE) for ternary systems (water + ethanol + PIL) at varying mass fraction of PIL and atmospheric pressure (101.3 kPa). It is shown that the effect of PILs on the VLE of the (water + ethanol) mixture follows the order: [HTEA][BF₄] > [HDEA][BF₄] > [HMEA][BF₄]. In addition, the relative volatilities of ethanol to water for pseudo-binary systems (water + ethanol + PIL) were calculated. The results indicate that the PILs studied can enhance the relative volatility of ethanol to water and even break the azeotropic behaviour of ethanol aqueous solution when PIL content is increased to a specified content.     

Separation of toluene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at T = 298.15 K and atmospheric pressure

In this paper, the separation of toluene from aliphatic hydrocarbons (heptane, or octane, or nonane) was analyzed by solvent extraction with 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid, [EMpy][ESO₄]. Liquid?liquid equilibrium (LLE) data for the ternary systems {heptane (1) + toluene (2) + [EMpy][ESO₄] (3)}, {octane (1) + toluene (2) + [EMpy][ESO₄] (3)}, and {nonane (1) + toluene (2) + [EMpy][ESO₄] (3)} were obtained by measurements at T = 298.15 K and atmospheric pressure. The selectivity, % removal of aromatic, and solute distribution ratio, obtained from experimental equilibrium results, were used to determine the ability of [EMpy][ESO₄] as a solvent. The degree of consistency of the experimental LLE values was ascertained using the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were correlated with the NRTL model. Finally, the results obtained were compared with other ionic liquids and other solvents.     

Extraction of toluene from aliphatic compounds using an ionic liquid as solvent: Influence of the alkane on the (liquid + liquid) equilibrium

In this paper, the feasibility of using 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid, [EMim][ESO₄], as solvent for the extraction of toluene from aliphatic compounds (hexane, heptane, octane, or nonane) was analyzed. (Liquid + liquid) equilibrium (LLE) data for the ternary systems {alkane (1) + toluene (2) + [EMim][ESO₄] (3)} were measured at T = 298.15 K and atmospheric pressure. Selectivity and solute distribution ratio were calculated from the experimental LLE data, and the obtained values were compared to those previously reported using other ionic liquids and sulfolane. The degree of consistency of the experimental LLE data was ascertained using the Othmer–Tobias equation. Finally, the experimental LLE data were satisfactorily correlated with NRTL and UNIQUAC models.     

(Liquid + liquid) equilibria for ternary mixtures of (alkane + benzene + [EMpy] [ESO4]) at several temperatures and atmospheric pressure

In this work, the separation of benzene from aliphatic hydrocarbons (hexane, or heptane) is investigated by extraction with 1-ethyl-3-methylpyridinium ethylsulphate ionic liquid, [EMpy][ESO₄]. (Liquid + liquid) equilibria (LLE) data are determined for the ternary systems: {hexane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15, 293.15, 298.15, and 303.15) K and {heptane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. The selectivity and distribution coefficient, derived from the tie line data, were used to determine whether the ionic liquid is a good solvent for the extraction of aromatic from aliphatic compounds. The consistency of the tie line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL equation. A study of the temperature effect and the influence of the chain length of the alkanes were realized. The results obtained were compared with other ionic liquids. There are no literature data for the mixtures discussed in this paper.     

Experiments and model for the surface tension of (MDEA + [Bmim][BF4]) and (MDEA + [Bmim][Br]) aqueous solutions

The surface tension (γ) of 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF₄]), 1-butyl-3-methylimidazolium bromide ([Bmim][Br]), (N-methyldiethanolamine(MDEA) + [Bmim][BF₄]) and (MDEA + [Bmim][Br]) aqueous solutions were measured by using the BZY-1 surface tension meter. The temperature ranged from (293.2 to 323.2) K. The mass fraction of MDEA ranged from 0.35 to 0.45. A thermodynamic equation was proposed to model the surface tension of (MDEA + ionic liquids) (ILS) aqueous solutions and the calculated results agreed well with the experiments. The effects of temperature, mass fractions of MDEA and ILS on the surface tension were demonstrated on the basis of experiments and calculations.     

Densities and viscosities for ionic liquids mixtures containing [eOHmim][BF4], [bmim][BF4] and [bpy][BF4]

Densities and viscosities of binary ionic liquids mixtures, 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) were measured over the entire mole fraction from T = (298.15 to 343.15) K. The excess molar volumes were calculated and correlated by Redlich–Kiser polynomial expansions. The viscosities for pure ionic liquids were analyzed by means of the Vogel–Tammann–Fulcher equation and ideal mixing rules were applied for the ILs mixtures.     

Separation of toluene and heptane by liquid–liquid extraction using z-methyl-N-butylpyridinium tetrafluoroborate isomers (z = 2, 3, or 4) at T = 313.2 K

The (liquid + liquid) equilibrium (LLE) data for three ternary systems containing heptane, toluene, and a z-methyl-N-butylpyridinium tetrafluoroborate ionic liquid ([zbmpy][BF₄] IL, where z = 2, 3, or 4) were determined at T = 313.2 K and atmospheric pressure. The effect of IL cation isomers on the LLE data was evaluated for the first time. The selectivity and extractive capacity from these LLE data were calculated and compared to those previously reported in the literature for the systems (heptane + toluene + [4bmpy][BF₄]) and (heptane + toluene + sulfolane). The results show that the LLE data for the systems comprising the ILs with the metha- and para-substituted cations do not differ significantly from isomer to isomer. On the other hand, significant differences were observed among the systems with the ortho-substituted cation and the other two cation isomers. The degree of consistency of the experimental LLE data was ascertained by applying the Othmer–Tobias correlation. In addition, the LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

Measurement and prediction of phase behaviour for 1-alkyl-3-methylimidazolium tetrafluoroborate and carbon dioxide: Effect of alkyl chain length in imidazolium cation

The high-pressure phase behaviour of the binary system {1-ethyl-methylimidazolium tetrafluoroborate ([EMIM][BF₄]) + CO₂} was determined over the temperature range of (293.2 to 323.2) K at intervals of 5.0 K with the CO₂ mole fraction ranging from 0.153 to 0.578 by using a high-pressure variable-volume view cell. Further, the (vapour + liquid) equilibrium of the binary system {1-hexyl-methylimidazolium tetrafluoroborate ([HMIM][BF₄]) + CO₂} was measured over the temperature range of (303.2 to 328.2) K with the CO₂ mole fraction ranging from 0.314 to 0.593. The Peng–Robinson equation of state along with two-parameter mixing rules has been employed to correlate the experimental results. In case of the ([EMIM][BF₄] + CO₂) system, the (vapour + liquid + liquid) equilibrium and (vapour + liquid) equilibrium have been observed at a high CO₂ mole fraction. The experimental values obtained in this study were compared with the available phase behaviour data of the binary system (1-alkyl-3-methylimidazolium tetrafluoroborate + CO₂) in order to investigate the effect of the alkyl chain length in the imidazolium cation on the phase behaviour of such systems.     

Vapour pressure measurement for binary and ternary systems containing water methanol ethanol and an ionic liquid 1-ethyl-3-ethylimidazolium diethylphosphate

Vapour pressure data were measured for three binary systems containing water, methanol or ethanol with an ionic liquid (IL) 1-ethyl-3-ethylimidazolium diethylphosphate([EEIM][DEP]) and for three ternary systems, i.e. (water + ethanol + [EEIM][DEP]), (water  + methanol + [EEIM][DEP]), and (ethanol + methanol + [EEIM][DEP]), at varying temperature and IL-content ranging from mass fraction of 0.10 to 0.85 by a quasi-static method. The vapour pressure data of the binary systems were correlated by NRTL equation with average absolute relative deviation (ARD) within 0.0091. The binary NRTL parameters were used to predict the vapour pressure of the ternary systems (ethanol + water + [EEIM][DEP]), (water + methanol + [EEIM][DEP]), and (ethanol +  methanol + [EEIM][DEP]) with an overall ARD of 0.037 and the maximum deviation of −0.1295. The results indicate that ionic liquid [EEIM][DEP] can give rise to a negative deviation from the Raoult’s law for the solvents of water, methanol and ethanol, but to a varying degree leading to the variation of relative volatility of a solvent and even removal of azeotrope for (water + ethanol).     

Liquid–liquid equilibrium for binary and ternary systems containing di-isopropyl ether (DIPE) and an imidazolium-based ionic liquid at different temperatures

Liquid–liquid equilibrium (LLE) data were determined for two binary systems {di-isopropyl ether (DIPE) + 1-ethyl-3-methylimidazolium-ethylsulfate (EMISE)} and {DIPE + 1-butyl-3-methylimidazolium-tetrafluoroborate([Bmim][BF₄])}at temperatures between 293.15 K and 313.15 K. LLE data for six ternary systems {DIPE + water + EMISE} and {DIPE + water + [Bmim][BF₄]} at 293.15 K, 303.15 K, and 313.15 K were also reported. Experiments were carried out at atmospheric pressure using stirred and thermo-regulated cells. The experimental data were correlated with the well-known NRTL and UNIQUAC activity coefficient models. In addition, distribution coefficients and selectivities of the ionic liquids EMISE and [Bmim][BF₄] for water in the DIPE phase were measured.     

Separation of benzene from alkanes by solvent extraction with 1-ethylpyridinium ethylsulfate ionic liquid

The (liquid + liquid) equilibrium (LLE) data for ternary mixtures {alkane + benzene + 1-ethylpyridinium ethylsulfate ([EPy][EtSO₄])} at T = (283.15 and 298.15) K and atmospheric pressure are presented. The alkanes used were hexane and heptane. The cloud point method was used to determinate the binodal curve, and the tie-line compositions were obtained by density measurements. The LLE data obtained were used to calculate distribution coefficients and selectivity values. The consistency of tie-line data was ascertained by applying the Othmer-Tobias and Hand equations. Correlation of the experimental tie-lines was conducted through the use of NRTL equation, which provides good correlation of the experimental data.The results show that [EPy][EtSO₄] can be used as an alternative solvent in liquid extraction processes for the removal of benzene from its mixtures with alkanes.     

Binary and ternary LLE data of the system (ethylbenzene + styrene + 1-ethyl-3-methylimidazolium thiocyanate) and binary VLE data of the system (styrene + 1-ethyl-3-methylimidazolium thiocyanate)

The distillation of close boiling mixtures may be improved by adding a proper affinity solvent, and thereby creating an extractive distillation process. An example of a close boiling mixture that may be separated by extractive distillation is the mixture ethylbenzene/styrene. The ionic liquid 1-ethyl-3-methylimidazolium thiocyanate ([EMIM][SCN]) is a promising solvent to separate ethylbenzene and styrene by extractive distillation. In this study, (vapour + liquid) equilibrium data have been measured for the binary system (styrene + [EMIM][SCN]) over the pressure range of (3 to 20) kPa and binary and ternary (liquid + liquid) equilibrium data of the system (ethylbenzene + styrene + [EMIM][SCN]) at temperatures (313.2, 333.2 and 353.2) K. Due to the low solubility of ethylbenzene in [EMIM][SCN], it was not possible to measure accurately VLE data of the binary system (ethylbenzene + [EMIM][SCN]) and of the ternary system (ethylbenzene + styrene + [EMIM][SCN]) using the ebulliometer. Because previous work showed that the LLE selectivity is a good measure for the selectivity in VLE, we determined the selectivity with LLE. The selectivity of [EMIM][SCN] to styrene in LLE measurements ranges from 2.1 at high styrene raffinate purity to 2.6 at high ethylbenzene raffinate purity. The NRTL model can properly describe the experimental results. The rRMSD in temperature, pressure and mole fraction for the binary VLE data are respectively (0.1, 0.12 and 0.13)%. The rRMSD is only 0.7% in mole fraction for the LLE data.