Behaviour of model footing on pond ash

This paper focuses on the effective utilization of pond ash, as foundation medium. A series of laboratory model tests have been carried out using square, rectangular and strip footings on pond ash. The effects of dry density, degree of saturation of pond ash, size and shape of footing on ultimate bearing capacity of shallow foundations are presented in this paper. Local shear failure of a square footing on pond ash at 37% moisture content (optimum moisture content) is observed up to the values of dry density 11.20 kN/m³ and general shear failure takes place at the values of dry density 11.48 kN/m³ and 11.70 kN/m³. Effects of degree of saturation on ultimate bearing capacity were studied. Experimental results show that degree of saturation significantly affects the ultimate bearing capacity of strip footing. The effect of footing length to width ratio (L/B), on increase in ultimate bearing capacity of pond ash, is insignificant for L/B ≥ 10 in case of rectangular footings. The effects of size of footing on ultimate bearing capacity for all shapes of footings viz., square, rectangular and strip footings are highlighted.     

Magnetic,geochemical and mineralogical properties of sediments from karstic and flysch rivers of Croatia and Slovenia

The aim of the present work was to investigate links between the low-field magnetic susceptibility (MS) and chemical and mineral composition of sediments from several Croatian and Slovenian rivers, as well as to determine possible anthropogenic influence on these sediments. MS measurements are a fast and simple method, which serves as a proxy for the estimation of pollution in different environmental systems. The investigated rivers are predominantly unpolluted rivers from Croatian and Slovenian karstic and flysch areas, which belong to the Adriatic or the Black Sea watersheds: the Dragonja, the Mirna, the Ra?a, the Ri?ana, the Reka, the Rak, the Cerkni?nica, the Unec and the Ljubljanica rivers. It was assumed that, due to their mostly unpolluted status, they could serve as a database for natural MS background values for this region. For comparison, several rivers and a lake from the Celje old metallurgic industrial area (Slovenia) were also investigated: the Savinja, the Hudinja, the Voglajna rivers and Slivni?ko Lake. They form a sub-basin of the Sava River drainage basin. Sediments of the clean karstic and flysch rivers showed extremely low MS values, with mass susceptibility values ranging from 0.58 × 10^?7 to 5.11 × 10^?7 m³/kg, and isothermal remanent magnetism (IRM) values ranging from 0.71 to 7.88 A/m. In the Celje industrial area, river sediments showed much higher MS values, with mass susceptibility values ranging from 1.31 × 10^?7 to 38.3 × 10^?7 m³/kg, and IRM values ranging from 0.91 to 100.42 A/m. The highest MS value was found in the Voglajna River at Teharje-?tore, a point which showed a significant number of anomalies of toxic metals in earlier investigations. Semiquantitative determination of relations between grain size and concentration of magnetite was performed using the Thompson-Oldfield method. X-ray diffraction (XRD) mineralogical analysis showed that sediments of the Celje area have mostly quartz as major mineral, with relatively small amount of carbonate minerals, while in sediments of karstic rivers carbonate minerals prevail. Statistically significant correlations were obtained between MS and Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Ba in the Slovenian karstic region and between MS and Cr, Fe, Co, Ni and Zn in flysch drainage basins. On the contrary, no correlation of MS and Hg content was obtained.     

Tchabal Gangdaba massif in the Cameroon Volcanic Line: a bimodal association

Tchabal Gangdaba (TG) volcanic massif, which is a part of the continental sector of the Cameroon Volcanic Line (CVL), is dated between 34.4 and 25.1 Ma. It displays mafic lavas (picrobasalt and basanite, 41–43 wt % SiO₂) and felsic lavas (rhyolite, 68–73 wt % SiO₂). The lack of intermediate rocks evidences a pronounced Daly gap between 43 and 68 wt % SiO₂, which corresponds to an important time span of 3.4 Ma. It is interpreted as due to extensive fractional crystallization under peculiar thermodynamical conditions. Felsic lavas yield strong negative anomalies in Ba, Sr and Eu (0.1?206Pb/²⁰⁴Pb?207Pb/²⁰⁴Pb?208Pb/²⁰⁴Pb?相似文献   

Seismic triggering of atmospheric variables prior to the major earthquakes in the Middle East within a 12-year time-period of 2002–2013

Several studies have reported the increased values of surface-latent heat flux (SLHF) and rainfall events prior to the earthquakes as the seismic precursors. In order to investigate the variation of two mentioned atmospheric variables, we analyzed 39 major earthquakes in the Middle East based on the time series of NASA remote sensing data. On this basis, we observed that accumulated rainfall and SLHF of about 29 earthquakes were higher than 10 mm and 50 W/m², respectively (~75 %), over 3–23 days prior to the main shock of major earthquakes. We believed that the records of atmospheric variables are the consequence of a seismic-triggered chain including of air ionization, surface-latent heat exhalation, water vapor condensation and subordinate rainfall as the atmospheric responses to lithospheric motions. This seismic triggering in the Middle East has averagely caused to accumulated rainfall of ~35 mm and maximum SLHF of ~115 W/m² over the 3–23 days prior to 39 major earthquakes. To investigate of spatial correlation between earthquakes and atmospheric variations, we clustered 39 major earthquakes in eight seismological regions. Then, we estimated the moderate and strong correlation (R ²) between preceding times of earthquakes with magnitude of major earthquakes and their hypocenter depth equal to 0.48 and 0.68, respectively.     

Modelling the response of fresh groundwater to climate and vegetation changes in coral islands

In coral islands, groundwater is a crucial freshwater resource for terrestrial life, including human water supply. Response of the freshwater lens to expected climate changes and subsequent vegetation alterations is quantified for Grande Glorieuse, a low-lying coral island in the Western Indian Ocean. Distributed models of recharge, evapotranspiration and saltwater phytotoxicity are integrated into a variable-density groundwater model to simulate the evolution of groundwater salinity. Model results are assessed against field observations including groundwater and geophysical measurements. Simulations show the major control currently exerted by the vegetation with regards to the lens morphology and the high sensitivity of the lens to climate alterations, impacting both quantity and salinity. Long-term changes in mean sea level and climatic conditions (rainfall and evapotranspiration) are predicted to be responsible for an average increase in salinity approaching 140 % (+8 kg m^?3) when combined. In low-lying areas with high vegetation density, these changes top +300 % (+10 kg m^?3). However, due to salinity increase and its phytotoxicity, it is shown that a corollary drop in vegetation activity can buffer the alteration of fresh groundwater. This illustrates the importance of accounting for vegetation dynamics to study groundwater in coral islands.     

Study of ground subsidence in northwest Harris county using GPS,LiDAR, and InSAR techniques

Subsidence has been affecting many cities around the world, such as Nagoya (Japan), Venice (Italy), San Joaquin Valley and Long Beach (California), and Houston (Texas). This phenomenon can be caused by natural processes and/or human activities, including but not limited to carbonate dissolution, extraction of material from mines, soil compaction, and fluid withdrawal. Surface deformation has been an ongoing problem in the Houston Metropolitan area because of the city’s location in a passive margin where faulting and subsidence are common. Most of the previous studies attributed the causes of the surface deformation to four major mechanisms: faulting, soil compaction, salt tectonics, and fluid withdrawal (groundwater withdrawal and hydrocarbon extraction). This work assessed the surface deformation in the greater Houston area and their possible relationship with fluid withdrawal. To achieve this goal, data from three complimentary remote sensing techniques Global Positioning System (GPS), Light Detection and Ranging (LiDAR), and Interferometric Synthetic Aperture Radar were used. GPS rates for the last 17 years show a change in surface deformation patterns. High rates of subsidence in the northwestern areas (up to ~4 cm/year) and signs of uplift in the southeast are observed (up to 2 mm\year). High rates of subsidence appear to be decreasing. Contrary to previous studies in which the location of subsidence appeared to be expanding toward the northwest, current results show that the area of subsidence is shrinking and migrating toward the northeast. Digital elevation model generated from airborne LiDAR, revealed changes between salt domes and their surrounding areas. The persistent scatterer interferometry was performed using twenty-five (25) European remote sensing-1/2 scenes. Rates of change in groundwater level and hydrocarbon production were calculated using data from 261 observation wells and 658 hydrocarbon wells. A water level decline of 4 m/year was found in area of highest subsidence, this area also show ~70 million m³/year of hydrocarbon extraction. This study found strong correlation between fluid withdrawals and subsidence. Therefore, both groundwater and hydrocarbon withdrawal in northwest Harris County are considered to be the major drivers of the surface deformation.     

Effects of pH on isotherm modeling and cation competition for Cd(II) and Cu(II) biosorption on Myriophyllum spicatum from aqueous solutions

The biosorption characteristics of Cd(II) and Cu(II) ions from aqueous solutions obtained using submerged aquatic plant (Myriophyllum spicatum) biomass were investigated in terms of equilibrium, kinetics, thermodynamics, and cation competition. Langmuir and Freundlich models were applied to describe the biosorption isotherm of metal ions by M. spicatum biomass and isotherm constants considering the most important parameter, pH. The variation of sorption isotherm constants showed pH dependence. The Langmuir and Freundlich models fitted the equilibrium data well. The maximum biosorption capacity (q _m) of M. spicatum biomass was determined to be 29.07 mg/g for the Cd(II) ion at pH 5.0 and 12.12 mg/g for the Cu(II) ion at pH 6.0. Chi square analysis showed that the Freundlich model fitted the equilibrium data better than the Langmuir isotherm. Competition of Cd(II) and Cu(II) in a binary solution showed that the Langmuir monolayer capacity of Cd(II) decreased from 29.07 mg/g with only Cd(II) in solution to 12.02 mg/g in the presence of Cu(II). Kinetics results showed that the biosorption processes of both metal ions followed the pseudo-second-order kinetics well. The calculated thermodynamic parameters (?G ⁰, ?H ⁰, and ?S ⁰) showed that biosorption of Cd(II) and Cu(II) ions onto M. spicatum biomass was feasible, spontaneous, and endothermic in nature. Fourier transform infrared spectroscopy spectrum analysis revealed that Cd(II) and Cu(II) sorption was mainly ascribed to carboxyl, hydroxyl, amine, and C–N groups in M. spicatum.     

Fractional crystallization and magma mixing: evidence from porphyritic diorite-granodiorite dykes and mafic microgranular enclaves within the Zhoukoudian pluton,Beijing

The Zhoukoudian pluton in the North China craton is a circular granodiorite intrusion containing porphyritic diorite dykes (PDDs), porphyritic granodiorite dykes (PGDs) and abundant mafic microgranular enclaves (MMEs), which provide an excellent opportunity to study fractional crystallization and magma mixing. The PDDs and PGDs are located in the western part of the pluton with the PDDs intruded by the PGDs. The dykes have similar mineral assemblages although plagioclase in the PDDs has higher anorthite content than the PGDs. Linear relationships between the SiO₂ and most major and trace element contents, as well as a positive trend of initial ⁸⁷Sr/⁸⁶Sr ratios and a negative trend of epsilon Nd values with increasing SiO₂ contents for the dykes suggest that both types were formed by assimilation and fractional crystallization of a common parental magma. Major oxide mass balance and trace element Rayleigh fractionation modeling points to early separation of garnet (11 %), clinopyroxene (27 %), orthopyroxene (16 %), plagioclase (25 %), biotite (19 %), and apatite (2 %) and late fractionation of hornblende (25 %), plagioclase (46 %), biotite (25 %), apatite (1 %), and magnetite (3 %). Most MMEs occur within the transitional granodiorite of the Zhoukoudian pluton. Zoned MMEs, dyke-like MME swarms, local presence of concave margins, veins and enclaves of host granodiorite within some MMEs, and several MMEs surrounded by the biotite-rich granodiorite support their formation by multiple magma mixing events, which finally resulted in different whole-rock major oxides and compatible elements, but homogeneous mineral major oxides (except zoned plagioclase), whole-rock incompatible elements and Sr-Nd isotopes between the MMEs and their host granodiorite. We suggest that multiple magma mixing events might also cause complexly zoned plagioclase in the Zhoukoudian pluton. Relative calcic, irregular or patchy cores and dusty zoned mantles from the zoned plagioclase crystals and their relatively low anorthite content indicate multiple mixing events between mafic/intermediate and felsic magmas. The mafic/intermediate end-members could be represented by the diabase dykes and the PDDs. Therefore, the dykes and MMEs in the Zhoukoudian pluton are genetically linked.     

Evaluating factors responsible for contrasting signature of wasteland development in northern and southern Ganga Plains (Bihar State,India) with focus on waterlogging

The present study provides assessment of wasteland development in Bihar State based on satellite data. Wasteland covers 6.90 % (6,501 km²) of the state area and exhibits dominance of waterlogged areas in North Bihar (25.28 %) and scrubland (26.61 %) in South Bihar. The waterlogged areas in the state are dominantly associated with northern Bihar plains (94 %) with minor development (6 %) in southern Bihar plains. Such unequal distribution of waterlogged land areas in northern and southern Bihar plains is largely governed by high cumulative discharge generated in the large catchment area in Himalayan mountain ranges in the upland areas of northern Bihar plains in contrast to low cumulative discharge generated within small catchments in the Chota Nagpur Plateau in the southern Bihar plains. It is evaluated that the relief and groundwater level define the primary controlling factors, whereas rainfall, watershed area, and upland/plain ratio exert secondary control. Lower relief areas with high rainfall exhibit high soil moisture thereby inducing conditions of waterlogging. The study signifies the potential of satellite image-based evaluation of waterlogging through the use of Digital Elevation Model, Tropical Rainfall Measuring Mission-based rainfall measurement, and temporal waterlogging assessment together with other terrain parameters for conceptual understanding of waterlogging in northern Bihar plains.     

Polycyclic aromatic hydrocarbons in surface sediments of Binacional Itaipu Lake,Brazil: characteristics,sources and toxicity evaluation

Itaipu Lake, which includes the Itaipu hydroelectric power plant, is one of the largest dams in the world and has a strong relationship with its surroundings. The flooded area has multiple uses such as navigation, recreation, water abstraction for industrial, urban and agricultural irrigation. The lake is located at the frontier between Brazil, Argentina and Paraguay. In this study, superficial sediments collected from nine sampling sites were analysed for grain size, organic matter and 16 priority polycyclic aromatic hydrocarbons (PAHs) using high-performance liquid chromatography (HPLC) with fluorescence detector. The total concentration of PAHs in the dry sediment ranged from 35.21 to 685.37 µg kg^?1. Diagnostic ratios showed that the possible source of PAHs in the Itaipu Lake could be pyrolitic and petrogenic. The potential toxicity of sediment of PAHs varied from not detected to 127.70 µg g^?1, suggesting that some adverse ecological effects would arise due to PAHs in these sediments.     

Moho structure of Central America based on three-dimensional lithospheric density modelling of satellite-derived gravity data

The Central American isthmus hosts a highly variable Moho structure due to the diverse origin and composition of the crustal basement and the influence of large-scale neotectonic processes. Gravity data from the combined geopotential model EGM2008 were interpreted via forward modelling to outline the three-dimensional lithospheric density structure along the Middle American Trench, as well as the segmentation of the oceanic Cocos and Nazca plates and the overriding Caribbean plate. In this work, results for the depth of the Moho obtained from the density model are presented. The Quaternary volcanic arc correlates with a maximum Moho depth of 44 km in western Guatemala. To the south-east of the continental shelf, the Caribbean plate shows Moho depths between 20 and 12 km whereas to the north, values as shallow as 8 km are observed at the Cayman trough. For the oceanic Cocos plate, depths between 16 and 21 km are obtained for the Moho along the Cocos ridge, contrasting with values between 15 and 12 km for the seamount segment and 8 and 11 km for the segments of the crust that are not affected by the Galapagos hot-spot track.     

Measurement of ambient air particulate pollutant concentrations and dry depositions for PS-1 combined with dry deposition plate at a wetland site

In this study, the concentrations of ambient total suspended particulates (TSP) and their dry deposition were measured using a PS-1 sampler with dry deposition plates at a wetland sampling site in central Taiwan during a sampling period from October 2016 to December 2016. The PS-1 sampler was fixed at set distances (1.5 and 2 m) from a dry deposition plate, and sampled particulate pollutants were sampled to determine their concentrations and dry deposition rates simultaneously. A dry deposition plate 3 m from the PS-1 sampler was also used to collect dry deposition particulate. This plate was also used to compare dry depositions from ambient air, collected from new device. The results thus obtained indicated that the average dry deposition rates on the dry deposition plates that were 1.5 and 2 m from the sampler were 103.15 and 103.94 µg/m² min, respectively, in October, 83.36 and 100.18 µg/m² min in November, and 171.2 and 157.5 µg/m² min in December. These dry deposition rates were compared with that 3 m away from the PS-1 sampler. The statistical t test revealed no significant differences between the dry depositions on dry deposition plates at 1.5 and 2 m from the sampler. The dry deposition rates at 1.5 and 2 m from the sampler did not differ significantly from that at 3 m from the PS-1 sampler. This study proves that a PS-1 sampler can be combined with a dry deposition plate to measure TSP concentrations and dry depositions simultaneously using a single device.     

Deformation zones under square footings supported by clayey soils

Footing settlements depend not only on physical and mechanical properties of base soils, but also on applied load intensities and their distributions with depth, as well as on footing rigidity, shape and dimensions. An analytical expression relating rigid bearing plate and/or footing settlements to thicknesses of deformation (active) zones, which form below footing bottoms, has been previously offered by the author. The results of tests performed with 0.5, 1.0 and 4.0 m²-area square footings, constructed on undisturbed clayey soils and containing data describing active zone development, were collected from literature and analyzed. This paper presents graphical relationships between square footing settlements, active zone thicknesses and footing dimensions, which are verified by published test results performed with experimental square footings, having areas different than the ones selected for statistical analyses.     

Numerical analysis under seismic loads of soils improvement with floating stone columns

Geotechnical Engineering has developed many methods for soil improvement so far. One of these methods is the stone column method. The structure of a stone column generally refers to partial change of suitable subsurface ground through a vertical column, poor stone layers which are completely pressed. In general terms, to improve bearing capacity of problematic soft and loose soil is implemented for the resolution of many problems such as consolidation and grounding problems, to ensure filling and splitting slope stability and liquefaction that results from a dynamic load such as earthquake. In this study, stone columns method is preferred as an improvement method, and especially load transfer mechanisms and bearing capacity of floating stone column are focused. The soil model, 32 m in width and 8 m in depth, used in this study is made through Plaxis 2D finite element program. The clay having 5° internal friction angle with different cohesion coefficients (c 10, c 15, c 20 kN/m²) are used in models. In addition, stone columns used for soil improvement are modeled at different internal friction angles (? 35°, ? 40°, ? 45°) and in different s/D ranges (s/D 2, s/D 3), stone column depths (B, 2B, 3B) and diameters (D 600 mm, D 800 mm, D 1000 mm). In the study, maximum acceleration (a _max = 1.785 m/s²) was used in order to determine the seismic coefficient used. In these soil models, as maximum acceleration, maximum east–west directional acceleration value of Van Muradiye earthquake that took place in October 23, 2011 was used. As a result, it was determined that the stone column increased the bearing capacity of the soil. In addition, it is observed that the bearing capacity of soft clay soil which has been improved through stone column with both static and earthquake load effect increases as a result of increase in the diameter and depth of the stone column and decreases as a result of the increase in the ranges of stone column. In the conducted study, the bearing capacity of the soil models, which were improved with stone column without earthquake force effect, was calculated as 1.01–3.5 times more on the average, compared to the bearing capacity of the soil models without stone column. On the other hand, the bearing capacity of the soil models with stone columns, which are under the effect of earthquake force, was calculated as 1.02–3.7 times more compared to the bearing capacity of the soil models without stone column.     

Experimental growth of åkermanite reaction rims between wollastonite and monticellite: evidence for volume diffusion control

Growth rates of monomineralic, polycrystalline åkermanite (Ca₂MgSi₂O₇) rims produced by solid-state reactions between monticellite (CaMgSiO₄) and wollastonite (CaSiO₃) single crystals were determined at 0.5 GPa dry argon pressure, 1,000–1,200°C and 5 min to 60 h, using an internally heated pressure vessel. Inert Pt-markers, initially placed at the monticellite–wollastonite interface, indicate symmetrical growth into both directions. This and mass balance considerations demonstrate that rim growth is controlled by transport of MgO. At 1,200°C and run durations between 5 min and 60 h, rim growth follows a parabolic rate law with rim widths ranging from 0.4 to 16.3 μm indicating diffusion-controlled rim growth. The effective bulk diffusion coefficient \( D_{\text{eff,MgO}}^{\text{Ak}} \) is calculated to 10^?15.8±0.1 m² s^?1. Between 1,000°C and 1,200°C, the effective bulk diffusion coefficient follows an Arrhenius law with E _a = 204 ± 18 kJ/mol and D ₀ = 10^?8.6±1.6 m² s^?1. Åkermanite grains display a palisade texture with elongation perpendicular to the reaction interface. At 1,200°C, average grain widths measured normal to elongation, increase with the square root of time and range from 0.4 to 5.4 μm leading to a successive decrease in the grain boundary area fraction, which, however, does not affect \( D_{\text{eff,MgO}}^{\text{Ak}} \) to a detectible extent. This implies that grain boundary diffusion only accounts for a minor fraction of the overall chemical mass transfer, and rim growth is essentially controlled by volume diffusion. This is corroborated by the agreement between our estimates of the effective MgO bulk diffusion coefficient and experimentally determined volume diffusion data for Mg and O in åkermanite from the literature. There is sharp contrast to the MgO–SiO₂ binary system, where grain boundary diffusion controls rim growth.     

Three-dimensional numerical and analytical study of horizontal group of square anchor plates in sand

In this paper, numerical and analytical methods are used to evaluate the ultimate pullout capacity of a group of square anchor plates in row or square configurations, installed horizontally in dense sand. The elasto-plastic numerical study of square anchor plates is carried out using three-dimensional finite element analysis. The soil is modeled by an elasto-plastic model with a Mohr–Coulomb yield criterion. An analytical method based on a simplified three-dimensional failure mechanism is developed in this study. The interference effect is evaluated by group efficiency η, defined as the ratio of the ultimate pullout capacity of group of N anchor plates to that of a single isolated plate multiplied by number of plates. The variation of the group efficiency η was computed with respect to change in the spacing between plates. Results of the analyses show that the spacing between the plates, the internal friction angle of soil and the installation depth are the most important parameters influencing the group efficiency. New equations are developed in this study to evaluate the group efficiency of square anchor plates embedded horizontally in sand at shallow depth (H = 4B). The results obtained by numerical and analytical solutions are in excellent agreement.     

Modeling and mapping of water erosion in northeastern Algeria using a seasonal multicriteria approach

Aurès region remains one of the most exposed areas to water erosion phenomenon in Algeria, because of the strong climatic aggressiveness, the rugged relief, the predominance of sensitive land, and a vegetative cover that does not play its protective role. This article is a part of studies performed to protect agricultural and water infrastructure in this region. The main objective of this study is the cartographic modeling of an erosion hazard at the Oued Chemoura watershed, representative of the Aurès. The modeling approach uses a geographic information system and incorporates the following six factors controlling erosion: slope, friability of substrate, erodibility of soils, land cover, rainfall erosivity, and support practices. Result shows a synthetic map of the soil erosion hazard which locates the most threatened areas and priorities for possible planning interventions. A statistical study on the relationship solid–liquid flow was developed. Measurements conducted at the station of Chemoura, over the period 1969–1994, were exploited for this purpose. The results show a high specific degradation varying between 50 and 360 tons km^?2 season^?1.     

Evaluating Light Availability,Seagrass Biomass,and Productivity Using Hyperspectral Airborne Remote Sensing in Saint Joseph’s Bay,Florida

Seagrasses provide a number of critical ecosystem services, including habitat for numerous species, sediment stabilization, and shoreline protection. Ariel photography is a useful tool to estimate the areal extent of seagrasses, but recent innovations in radiometrically calibrated sensors and algorithm development have allowed identification of benthic types and retrieval of absolute density. This study demonstrates the quantitative ability of a high spatial resolution (1 m) airborne hyperspectral sensor (3.2 nm bandwidth) in the complex coastal waters of Saint Joseph’s Bay (SJB). Several benthic types were distinguished, including submerged and floating aquatic vegetation, benthic red algae, bare sand, and optically deep water. A total of 23.6 km² of benthic vegetation was detected, indicating no dramatic change in vegetation area over the past 30 years. SJB supported high seagrass density at depths shallower than 2 m with an average leaf area index of 2.0?±?0.6 m² m^?2. Annual seagrass production in the bay was 13,570 t C year^?1 and represented 41 % of total marine primary production. The effects of coarser spatial resolution were investigated and found to reduce biomass retrievals, underestimate productivity, and alter patch size statistics. Although data requirements for this approach are considerable, water column optical modeling may reduce the in situ requirements and facilitate the transition of this technique to routine monitoring efforts. The ability to quantify not just areal extent but also productivity of a seagrass meadow in optically complex coastal waters can provide information on the capacity of these environments to support marine food webs.     

Radiation resistant of native Deinococcus spp. isolated from the Lout desert of Iran “the hottest place on Earth”

Two native ionizing radiation-resistant bacteria were isolated and identified from a soil sample collected from extreme conditions of the Lout desert in Iran. The hottest land surface temperature has been recorded in the Lout desert from 2004 to 2009. Also, it is categorized as a hyper arid place. Both ionizing radiation and desiccation may cause damage on genome. Soil sample was irradiated in order to eliminate sensitive bacteria then cultured in one-tenth-strength tryptic soy broth medium. Bacterial suspension used for radiation treatment. Morphological and physiological characterization and phylogenetic studies based on 16S rRNA gene sequence were used for identification. The cells were rod shape, non-motile, non-spore forming and gram positive. The 16S rRNA gene sequence showed 99.5 % of similarity to Deinococcus ficus. Phylogenetic dendrogram demonstrated that the isolates branched with D. xibeiensis, D. ficus and D. mumbaiensis. Both isolates were resistant to >15 kGy of gamma radiation and >600 J m² of UV radiation. This is the first report on radiation resistant bacteria belonging to genus Deinococcus isolated from the Lout desert of Iran.     

Thresholds of Adverse Effects of Macroalgal Abundance and Sediment Organic Matter on Benthic Habitat Quality in Estuarine Intertidal Flats

Confidence in the use of macroalgae as an indicator of estuarine eutrophication is limited by the lack of quantitative data on the thresholds of its adverse effects on benthic habitat quality. In the present study, we utilized sediment profile imagery (SPI) to identify thresholds of adverse effects of macroalgal biomass, sediment organic carbon (% OC) and sediment nitrogen (% N) concentrations on the apparent Redox Potential Discontinuity (aRPD), the depth that marks the boundary between oxic near-surface sediment and the underlying suboxic or anoxic sediment. At 16 sites in eight California estuaries, SPI, macroalgal biomass, sediment percent fines, % OC, and % N were analyzed at 20 locations along an intertidal transect. Classification and Regression Tree (CART) analysis was used to identify step thresholds associated with a transition from "reference" or natural background levels of macroalgae, defined as that range in which no effect on aRPD was detected. Ranges of 3–15 g dw macroalgae m^?2, 0.4–0.7 % OC and 0.05–0.07 % N were identified as transition zones from reference conditions across these estuaries. Piecewise regression analysis was used to identify exhaustion thresholds, defined as a region along the stress–response curve where severe adverse effects occur; levels of 175 g dw macroalgae m^?2, 1.1 % OC and 0.1 % N were identified as thresholds associated with a shallowing of aRPD to near zero depths. As an indicator of ecosystem condition, shallow aRPD has been related to reduced volume and quality for benthic infauna and alteration in community structure. These effects have been linked to reduced availability of forage for fish, birds and other invertebrates, as well as to undesirable changes in biogeochemical cycling.