Dielectric Properties of Pb(Fe2/3W1/3)O3–PbTiO3 Solid-Solution Ceramics

The dielectric properties of (1− x )Pb(Fe_2/3W_1/3)O₃· x PbTiO₃ solid solutions were investigated from 10² to 10⁶ Hz in the temperature range 150–600 K. The phase transition of Pb(Fe_2/3W_1/3)O₃ (PFW) was shifted by PbTiO₃ (PT) additions to higher temperatures at a rate of 6.3 K/mol% of PT. The temperature dependence of dielectric permittivity showed a sharper transition as the PT content increased. Dielectric measurements in a wide temperature range showed the presence of a second set of dielectric peaks at higher temperatures (350–600 K), besides the ferroelectric–paraelectric phase transition. This second set of peaks vanished when the samples were annealed in nitrogen. The activation energy values for the second relaxation varied between 0.50 and 0.63 eV, in agreement with the conduction activation energy determined for each sample. This relaxation is apparently related to electron holes.     

Microstructure and Electrical Properties of (K, Na, Li)NbO3–Pb(Zr,Ti)O3 Piezoelectric Ceramics

A new type (1− x )(K_0.485Na_0.485Li_0.03)NbO₃– x Pb(Zr_0.53Ti_0.47)O₃ piezoelectric ceramics was fabricated by conventional ceramics sintering technique. Their microstructure and electrical properties of the ceramics were also studied. X-ray diffraction and scanning electron microscopy patterns indicate that all ceramics samples exhibit a pure perovskite and highly dense structure, and the coexistence of the tetragonal and orthorhombic phases is formed; The ceramic with x =0.75 exhibits the following excellent properties: d ₃₃=363 pC/N, k _p=63%, Q _m=142, ɛ_r=1590, tan δ=1.70%, P _r=28.6 μC/cm², E _c=0.89 kV/mm, T _c=295°C. These results indicate that the ceramic is a promising candidate for piezoelectric ceramics in practical applications.     

Phase Transitions and Electrical Properties of (Na1−xKx)(Nb1−ySby)O3 Lead-Free Piezoelectric Ceramics With a MnO2 Sintering Aid

Lead-free piezoelectric ceramics (Na_{1− x} K _x )(Nb_{1− y} Sb _y )O₃+ z mol% MnO₂ have been prepared by a conventional solid-state sintering technique. Our results reveal that Sb⁵⁺ diffuses into the K_0.5Na_0.5NbO₃ lattices to form a solid solution with a single-phase orthorhombic perovskite structure. The partial substitution of Sb⁵⁺ for B-site ion Nb⁵⁺ decreases the paraelectric cubic-ferroelectric tetragonal phase transition ( T _c) and the ferroelectric tetragonal-ferroelectric orthorhombic phase transition ( T _O–F), and retains strong ferroelectricity. A small amount of MnO₂ is enough to improve the densification of the ceramics. The co-effects of MnO₂ doping and Sb substitution lead to significant improvements in ferroelectric and piezoelectric properties. The ceramics with x =0.45–0.525, y =0.06–0.08, and z =0.5–1 exhibit excellent ferroelectric and piezoelectric properties: d ₃₃=163–204 pC/N, k _P=0.47–0.51, k _t=0.46–0.52, ɛ=640–1053, tan δ=1.3–3.0%, P _r=18.1–22.6 μC/cm², E _c=0.72–0.98 kV/mm, and T _C=269°–314°C.     

Phase Structure and Electrical Properties of (K0.48Na0.52)(Nb0.95Ta0.05)O3-LiSbO3 Lead-Free Piezoelectric Ceramics

(1− x )(K_0.48Na_0.52)(Nb_0.95Ta_0.05)O₃– x LiSbO₃ [(1− x )KNNT− x LS] lead-free piezoelectric ceramics were prepared by the conventional solid-state sintering method. A morphotropic phase boundary (MPB) between orthorhombic and tetragonal phases was identified in the composition range of 0.03< x <0.05. The ceramics near the MPB exhibit a strong compositional dependence and enhanced electrical properties. The (1− x )KNNT– x LS ( x =0.04) ceramics exhibit good electrical properties ( d ₃₃=250 pC/N, k _p=45.1%, k _t =46.3%, T _c=348°C, T _{o − t} =74°C, P _r=25.9 μC/cm², E _c=10.7 kV/cm, ɛ_r∼1352, tan δ∼3%). These results show that (1− x )KNNT– x LS ceramic is a promising lead-free piezoelectric material.     

Low Temperature Coefficient of Resonance Frequency Composition in the System Pb(Zr,Ti)O3—Pb(Mn1/3 Nb2/3)O3

Pb(Zr,Ti)O₃–Pb(Mn_1/3 Nb_2/3)O₃ (PZT–PMnN) system has been studied for high-power piezoelectric applications. This study investigates this system to find out the composition with high-power density piezoelectric characteristics and low tem-perature coefficient of resonance frequency (TCF). It was found that the composition 0.9PZT–0.1PMnN (Zr/Ti = 0.51/0.49) modified with 6 mol% Sr exhibits a TCF of −8 ppm/°C (−20 to +80°C). Further, the dielectric and piezoelectric properties of this composition are as follows: k _p= 0.53; Q _m= 800; d ₃₃= 274; ε₃₃/ε₀= 1290 and tan δ=1.1%, which shows the suitability of this composition for ultrasonic devices used under fluctuating thermal environment.     

Perovskite Phase Formation in the Relaxor System [Pb(Fe1/2Nb1/2)O3]1-x–[Pb(Zn1/3Nb2/3)O3]x

Phase formation and dielectric properties of the compositions in the system [Pb(Fe_1/2Nb_1/2)O₃]₁_ _x –[Pb(Zn_1/3Nb_2/3)O₃] _x were investigated as possible materials for multilayer ceramic capacitors. The formation of the phase with perovskite structure and dielectric properties of ceramics at room temperature in the entire composition range are presented. The undesirable pyrochlore phase can be suppressed up to x = 0.6 by adopting calcination of B-site oxides, followed by reaction with PbO. Compositions in the single-phase range can be sintered at less than 1000°C.     

Cation Ordering Transformations in the Ba(Zn1/3Nb2/3)O3-La(Zn2/3Nb1/3)O3 System

Single-phase perovskites were formed in the (1−_x)Ba(Zn_1/3Nb_2/3)O₃-( _x )La(Zn_2/3Nb_1/3)O₃ system for compositions with 0.0≤ x ≤0.6. Although the stability of the trigonal "1:2" ordered structure of the Ba(Zn_1/3Nb_2/3)O₃ end member is very limited (0.0≤ x ≤0.05), low levels of lanthanum induce a transformation to a cubic, "1:1" ordered structure that has a broad range of homogeneity (0.05≤ x ≤0.6). Samples with x > 0.6 were comprised of La₃NbO₇, ZnO, and a perovskite with x = 0.6. The cubic 1:1 phases were fully ordered and no evidence was found for a compositionally segregated microstructure. These observations could not be reconciled in terms of a "space-charge" model; rather, they supported a charge-balanced, "random-site" structure for the 1:1 cation-ordered Ba(β_1/2'β_1/2")O₃ phases.     

Dielectric-State Analysis in Solid-Solution Pb(Yb1/2Ta1/2)O3–Pb(Lu1/2Nb1/2)O3

The structure and temperature dependence of complex lead perovskite dielectrics were investigated for the system (1 − x )Pb(Yb_1/2Ta_1/2)O₃– x Pb(Lu_1/2Nb_1/2)O₃. Superlattice reflections for the compositions 0.8 < x < 1.0 were observed by X-ray diffractometry, and the temperature-composition dielectric-state diagram was determined. In the present study, the disordered middle composition, with 0.2 < x < 0.8, showed a diffuse paraelectric–ferroelectric phase transition, whereas the ordered end compositions, with 0 ≤ x < 0.2 and 0.8 < x ≤ 1.0, revealed successive sharp paraelectric–antiferroelectric and weak antiferroelectric–ferroelectric phase transitions. The dielectric state was confirmed by examining the variation of polarization ( P ) with electric field ( E ).     

Structure and Dielectric Properties of the Ba(Mg1/3Nb2/3)O3-La(Mg2/3Nb1/3)O3 System

A complete range of perovskite solid solutions can be formed in the (1 − x )Ba(Mg_1/3Nb_2/3)O₃- x La(Mg_2/3Nb_1/3)O₃ (BMN-LMN) pseudobinary system. While pure BMN adopts a 1:2 cation ordered structure, 1:1 ordered phases are stabilized for 0.05 ≤ x ≤ 1.0. Dark-field TEM images indicate that the La-doped solid solutions are comprised of large 1:1 ordered domains and no evidence was found for a phase-separated structure. This observation coupled with the systematic variations in the intensities of the supercell reflections supports a charge-balanced "random-site" model for the 1:1 ordering. The substitution of La also induces a transformation from a negative to positive temperature coefficient of capacitance in the region 0.25 ≤ x ≤ 0.5.     

Processing and Electrical Properties in Lead-Based (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2Nb1/2)O3, PbTiO3) Systems

Lead-based ferroelectric (FE) ceramics exhibit superior electromechanical properties; therefore, there has been an increased focus on developing new lead-based FE materials with high Curie temperature ( T _c) and enhanced properties. The aim of this study was to investigate new compositions in the Pb(Mg_1/3Nb_2/3)O₃–Pb(Yb_1/2Nb_1/2)O₃–PbTiO₃ ( PMN–PYbN–PT) system to enhance the electromechanical properties while increasing the T _c and lowering the sintering temperature. The 0.575[0.5PMN–0.5PYbN]–0.425PT composition at PMN/PYbN (50/50) mole ratio were prepared by reactive sintering PMNT and PYbNT powder mixtures at 950°–1200°C for 4 h. PMNT and PYbNT powders were calcined via the columbite method. Samples were prepared by cold isostatic pressing at 80 MPa. Dense and fully perovskite 0.575[0.5PMN–0.5PYbN]–0.425PT ceramics were fabricated at 975°C for 4 h, and these samples displayed a remnant polarization ( P _r) of 32 μ C/cm², coercive field ( E _c) of 17 kV/cm, and a piezoelectric charge coefficient ( d ₃₃) of 475 pC/N. It is proposed that this ternary system can be tailored for various applications.     

Microstructure and Electrical Properties of [(K0.50Na0.50)0.95−xLi0.05Agx](Nb0.95Ta0.05)O3 Lead-Free Ceramics

[(K_0.50Na_0.50)_{0.95− x} Li_0.05Ag _x ](Nb_0.95Ta_0.05)O₃ (KNLNANT- x ) lead-free piezoelectric ceramics were prepared by normal sintering. Effects of the Ag content on the microstructure and electrical properties of KNLNANT- x ceramics were systematically investigated. It is found that the ceramics with x =0.03 exhibit relatively good electrical properties along with high Curie temperature: ( d ₃₃∼252 pC/N, T _c∼438°C, k _p∼45.4%, P _r∼30.1 μC/cm², E _c∼13.8 kV/cm, ɛ_r∼1030, and tan δ∼2.6%). The related mechanism for enhanced electrical properties of the ceramics was also discussed. These results show that KNLNANT-0.03 ceramic is a promising candidate material for high temperature lead-free piezoelectric ceramics.     

Structure and Dielectric Properties of Pb(Sc2/3W1/3)O3–Pb(Zr/Ti)O3 Relaxors

The structure and dielectric properties of (1− x )Pb(Sc_2/3W_1/3)O₃–( x )Pb(Zr/Ti)O₃ ceramics have been investigated over a full substitution range. All compositions with x < 0.5 adopt a cubic perovskite structure; however, for x ≤ 0.25 a doubled cell results from a 1:1 ordered distribution of the B-site cations. The structural order in Pb(Sc_2/3W_1/3)O₃ (PSW) can be described by a random-site model with one cation site occupied by Sc³⁺ and the other by a random distribution of (Sc_1/3³⁺W_2/3⁶⁺). The ordering is destabilized in solid solutions of PSW with PbZrO₃ (PSW–PZ), but stabilized by PbTiO₃ in the (1− x )PSW–( x )PT system. The changes in order are accompanied by alterations in the dielectric response of the two systems. For PSW–PZ the temperature of the permittivity maximum ( T _ɛ,max) increases linearly with x ; however, for PSW–PT T _ɛ,max decreases in the ordered region (up to x = 0.25) and then increases rapidly as the order is lost. Similar effects were produced by modifying the degree of order of (0.75)PSW–(0.25)PT; when the order parameter was reduced from ∼1.0 to ∼0.65, T _ɛ,max increased by more than 60°C.     

Microwave Dielectrics in the (La1/2Na1/2)TiO3–Ca(Fe1/2Nb1/2)O3 System

Dielectric properties of the system (1 − x)(La_1/2Na_1/2)TiO₃– _x Ca(Fe_1/2Nb_1/2)O₃, where 0.4 # x # 0.6, have been investigated at microwave frequencies. The temperature coefficient of resonant frequency (τ_f), nearly 0 ppm/°C, was realized at x = 0.58. These ceramics had perovskite structure and showed relatively low dielectric losses. A new dielectric material applicable to microwave devices having Q · f of 12000–14000 GHz and a dielectric constant (ε_r) of 59–60 has been obtained at 1300–1350°C for 5–15 h sintering.     

Dielectric Behavior of the Relaxor Pb(Mg1/3Nb2/3)O3—PbTiO3 Solid-Solution System in the Microwave Region

Dielectric behavior of the relaxor ferroelectric Pb(Mg_1/3Nb_2/3)O₃—PbTiO₃ solid-solution system was studied from—50° to 200°C in the 100 to 12 × 10⁹ Hz frequency region, and a broad dielectric relaxation was measured for compositions throughout the system. The relative microwave permittivity of the composition 0.9Pb(Mg_1/3Nb_2/3)O₃·0.1 PbTiO₃ decreased by 1 order of magnitude from the 1-MHz value of 11800, and similar decreases were observed for other compositions in the system. Dielectric loss (tan δ) values ranged from 0.5 to 1.0 at microwave frequency. The temperature of the broad dielectric constant maximum shifts toward higher values with increased frequency.     

Crossover of Ba(Ti,Y)O3 Solid Solutions to Ba3Ti2YO8.5–BaTiO3 Composites and their Dielectric Properties

Ceramic samples with the nominal composition (1− x ) BaTiO₃+ x Ba₃Ti₂YO_8.5 ( x =0−0.535) were prepared by the mixed oxide method. X-ray diffraction (XRD) analysis shows that the materials are of single phase with a cubic symmetry as x ≤0.16. The compositions of the solid solutions ( x ≤0.16) can be expressed equivalently as Ba(Ti_{1− y} Y _y )O_3−δ ( y ≤0.122, y = x /(1+2 x )). For x >0.16, the materials are diphasic composites consisting of Ba(Ti_{1− y} Y _y )O₃ ( y =0.122) and Ba₃Ti₂YO_8.5. The microstructure observation by scanning electron microscopy supports the XRD result. The dielectric behavior and phase transitions of the solid solutions ( x ≤0.16) vary with different Y concentrations. The dielectric constant of the composites ( x >0.16) follows approximately the Lichteneker relation in a wide temperature range.     

Mechanical Activation-Assisted Synthesis of Pb(Fe2/3W1/3)O3

Perovskite Pb(Fe_2/3W_1/3)O₃ (PFW) was prepared via a mechanical activation-assisted synthesis route from mixed oxides of PbO, Fe₂O₃, and WO₃. The mechanically activated oxide mixture, which exhibited a specific area of >10 m²/g, underwent phase conversion from nanocrystalline lead tungstate (PbWO₄) and pyrochlore (Pb₂FeWO_6.5) phases on sintering to yield perovskite PFW, although the formation of perovskite phase was not triggered by mechanical activation. When heated to 700°C, >98% perovskite phase was formed in the mechanically activated oxide mixture. The perovskite phase was sintered to a density of ∼99% of theoretical density at 870°C for 2 h. The sintered PFW exhibited a dielectric constant of 9800 at 10 kHz, which was ∼30% higher than that of the PFW derived from the oxide mixture that was not subjected to mechanical activation.     

Ferroelectric and Structural Properties of the Pb(Sc1/2Nb1/2)1-x,Tix,O3 System

Extensive solid solution was observed in the system Pb(Sc_1/2/,Nb_1/2,)_1-x,Ti_x,O₃. In the range 0 ≤ x ≤ 0.425 a rhombohedral ferroelectric phase was stable at 25° C. In the range 0.45 ≤ x ≤ 1.00 a tetragonal ferroelectric phase was stable at this temperature. The phase diagram of the system below 500° C strongly resembles that of PbZrO₃−PbTiO₃. The compound Pb(Sc_1/2Nb_1/2)O₃ exhibited rhombohedral perovskite cell symmetry below the ferroelectric ↔ paraelectric transition temperature, and the angle a was acute. The radial coupling coefficient was 0.46 for the composition Sc_1/2Nb_1/2)_0.575Ti_0.4250O₃. At 25°C this composition consisted primarily of the rhombohedral phase with a small amount of the tetragonal phase present. The ferroelectric ↔ paraelectric transition occurred over a temperature range in the rhombohedral phase field. The spontaneous polarization was finite at temperatures considerably above the temperature of the permittivity maximum for a given rhombohedral solid solution.     

Crystal Structure and Ferroelectric Properties of (Bi0.5Na0.5)TiO3–Ba(Zr0.05Ti0.95)O3 Piezoelectric Ceramics

The crystal structure and ferroelectric properties of (1− x )(Bi_0.5Na_0.5)TiO₃– x Ba(Zr_0.05Ti_0.95)O₃ (BNBZT x, x ≤12%) lead-free piezoelectric ceramics were studied. The distance between the centers of cations and anions ( d _c–a) as well as the lattice parameters was carefully investigated by Rietveld refinement on X-ray diffraction patterns. It was found that the crystal phase was determined by the amount of Ba(Zr_0.05Ti_0.95)O₃ added, whereas the pure rhombohedral and tetragonal phases are observed in compositions containing x ≤4 and x ≥8%, respectively. A rhombohedral–tetragonal morphotropic phase boundary (MPB) was found at around BNBZT6, which showed a maximum and minimum d _c–a at its rhombohedral and tetragonal phases, respectively. According to the present study, the ferroelectric properties show a strong dependence on their crystal phases. For the single-phase compositions, the remanent polarization ( P _r) generally increased with the value of d _c–a while their coercive fields ( E _c) were determined by their lattice parameters. Nevertheless, the behavior in P _r and E _c for MPB compositions is related to not only the lattice parameter but also the composed phases.     

Phase Transition and Ferroelectric Characteristics of Pb[(Mg1/3Nb2/3)1-xTix]O3 Ceramics Modified with La(Mg2/3Nb1/3)O3

The effects of 0–5 mol% addition of La(Mg_2/3Nb_1/3)O₃ (LMN) on the phase transition and ferroelectric behaviors of Pb[(Mg_1/3Nb_2/3)_1-xTi_x]O₃ (PMNT) ceramics with compositions near the morphotropic phase boundary (MPB) were studied. An evolution of structure from rhombohedral to tetragonal was found with increasing PbTiO₃ (PT) content across the MPB (at ∼32.5 mol% PT), and a coexistence of both rhombohedral and tetragonal phases was also found at the MPB. The dual-phase field extended toward the lower PT content side of the MPB, and, moreover, the rhombohedrality or tetragonality was reduced, especially for the compositions near the MPB, by the addition of La in PMNT. The ferroelectric transition was found to change from normal to diffuse as the La content increased and the compositions became more rhombohedral. In accordance with the structural evolution, the change of remanent polarization ( P _r) and coercive field ( E _c) also became gradually indistinct, and both P _r and E _c were reduced. For compositions near the MPB, both PMNT and La-modified PMNT had a similar electromechanical factor ( k _p) in a range around 0.55–0.60, but the mechanical quality factor ( Q _m) was significantly reduced for the La-modified PMNT. The piezoelectric coefficient ( d ₃₃), however, was largely improved with increasing La content in PMNT of compositions at MPB. A high value of d ₃₃∼ 815 pC/N was obtained for the 5-mol%-La-modified ceramics, but it was associated with a low value of Q _m.