Facile Fabrication of Robust Ice‐Phobic Polyurethane Sponges

Bio‐inspired superhydrophobicity is a promising anti‐icing (or deicing) strategy, but a superhydrophobic surface may lose its anti‐icing capability once the deposited water freezes. Herein, it is shown that ice can be readily and repeatedly removed from the surface of superhydrophobic polyurethane sponges via a simple mechanical squeezing process. The sponges are fabricated through a mussel‐inspired process and subsequent deposition of Ag nanoparticles. The resulting sponges are able to shed off the ice layers formed on their surfaces up to 90 times, exhibiting robust icephobic properties among the reported superhydrophobic surfaces. The mechanism for the excellent icephobicity is investigated by a highly sensitive microelectrobalance and a fluorescent labeling method. It is revealed that the icephobicity is attributed to low ice adhesion of the superhydrophobic sponges, as well as mechanical durability of their surface textures. The present findings provide a facile strategy to fabricate robust icephobic surfaces for various technological applications.     

Anti‐Eis‐Oberflächenbeschichtungen

Anti‐icing coating — optimization by means of plasma technology Ice on surfaces can significantly limit the function of devices and has to be removed by processes with high energy consumption. E. g., the formation of ice on rotor blades of wind turbines is not desired, on the wings of aircrafts it is even dangerous. With the aid of plasma technology, the Fraunhofer IGB has developed an anti‐icing coating for polymeric surfaces. Water‐repellent micro‐ and nanostructured coatings are applied to polymer foils made of impact‐resistant and shockproof polyurethane. Optimization of various process parameters has made it possible to produce ultra‐thin coatings, which reduces the ice's adhesion by over 90 percent. The new nanostructured foils open a wide range of applications.     

Bioinspired Stimuli‐Responsive and Antifreeze‐Secreting Anti‐Icing Coatings

The detrimental impacts of icing on transportation and power industries are well‐known. Inspired by natural systems that secrete a functional liquid in response to stimuli, this work introduces an anti‐icing coating that responds to surface icing by releasing antifreeze liquid. It consists of an outer porous superhydrophobic epidermis and a wick‐like underlying dermis that is infused with antifreeze liquid. The functionality of the new coating is validated through condensation frosting, simulated freezing fog, and freezing rain experiments. In the tested conditions, the introduced anti‐icing skin delays onset of frost, rime, and glaze accumulation at least ten times longer than anti‐icing superhydrophobic and lubricant impregnated surfaces. Furthermore, the coating delays onset of glaze formation ten times longer than surfaces flooded with a thin film of antifreeze. In each of the icing scenarios, the fundamental mechanisms responsible for antifreeze release and their relation to required antifreeze replenishment rates are described.     

Anti‐Icing Superhydrophobic Surfaces Based on Core‐Shell Fossil Particles

A novel approach for the design of functional coatings using fossil diatomaceous earth particles decorated by a thin layer of grafted polymer chains is reported. The polymer‐modified diatomaceous earth particles are able to form liquid marbles, superhydrophobic surfaces, and are highly promising for the design of anti‐icing coatings.     

Exploring the Nickel–Graphene Nanocomposite Coatings for Superior Corrosion Resistance: Manipulating the Effect of Deposition Current Density on its Morphology,Mechanical Properties,and Erosion‐Corrosion Performance

The use of graphene‐based composite as anti‐corrosion and protective coatings for metallic materials is still a provocative topic worthy of debate. Nickel–graphene nanocomposite coatings have been successfully fabricated onto the mild steel by electrochemical co‐deposition technique. This research demonstrates the properties of nickel–graphene composite coatings influenced by different electrodeposition current densities. The effect of deposition current density on the; surface morphologies, composition, microstructures, grain sizes, mechanical, and electrochemical properties of the composite coatings are executed. The coarseness of deposited coatings increases with the increasing of deposition current density. The carbon content in the composite coatings increases first and then decreases by further increasing of current density. The improved mechanical properties and superior anti‐corrosion performance of composite coatings are obtained at the peak value of current density of 9 A dm^?2. The incorporation of graphene sheets into nickel metal matrix lead to enhance the micro hardness, surface roughness, and adhesion strength of produced composite coatings. Furthermore, the presence of graphene in composite coating exhibits the reduced grain sizes and the enhanced erosion–corrosion resistance properties.

     

Excellent Anti‐Icing Abilities of Optimal Micropillar Arrays with Nanohairs

Anti‐icing abilities are achieved on surfaces of micropillar arrays with nanohairs that are fabricated by methods of soft replication and crystal growth, i.e., different micropillar arrays with the similar nanohairs, different nanohairs with the same micropillar arrays. It is demonstrated that an optimal micropillar array with nanohairs contributes an excellent anti‐icing or antifogging property at low temperature below zero. As a result, the longest icing delay time is achieved effectively up to ≈9839 s at −10 °C on the optimal surface. As for the optimal surface in humidity, the condensed droplets merge into each other, and meanwhile jump off easily. Accordingly, a largest dry area is up to ≈90.5% at −5 °C in ≈1020 s after breeze action. It is attributed to the stability of less liquid–solid fraction on an optimal surface under low temperature, in addition to cooperation between micropillar arrays and nanohairs in sizes. This finding provides an insight into the design of structure size on micro–nanostructured surface for anti‐icing/antifogging ability effectively, which can be extended into the applications in some surfaces of systems, e.g., microdevices worked in cold or humid environment.     

Lubricant‐Infused PET Grafts with Built‐In Biofunctional Nanoprobes Attenuate Thrombin Generation and Promote Targeted Binding of Cells

New surface coatings that enhance hemocompatibility and biofunctionality of synthetic vascular grafts such as expanded poly(tetrafluoroethylene) (ePTFE) and poly(ethylene terephthalate) (PET) are urgently needed. Lubricant‐infused surfaces prevent nontargeted adhesion and enhance the biocompatibility of blood‐contacting surfaces. However, limited success has been made in incorporating biofunctionality onto these surfaces and generating biofunctional lubricant‐infused coatings that both prevent nonspecific adhesion and enhance targeted binding of biomolecules remains a challenge. Here, a new generation of fluorosilanized lubricant‐infused PET surfaces with built‐in biofunctional nanoprobes is reported. These surfaces are synthesized by starting with a self‐assembled monolayer of fluorosilane that is partially etched using plasma modification technique, thereby creating a hydroxyl‐terminated fluorosilanized PET surface. Simultaneously, silanized nanoprobes are produced by amino‐silanizing anti‐CD34 antibody in solution and directly coupling the anti‐CD34‐aminosilane nanoprobes onto the hydroxyl terminated, fluorosilanized PET surface. The PET surfaces are then lubricated, creating fluorosilanized biofunctional lubricant‐infused PET substrates. Compared with unmodified PET surfaces, the designed biofunctional lubricant‐infused PET surfaces significantly attenuate thrombin generation and blood clot formation and promote targeted binding of endothelial cells from human whole blood.     

Simulation‐Experimental Approach to Investigate the Role of Interfaces in Self‐Replenishing Composite Coatings

To investigate self‐replenishing on surface‐structured composite coatings a dual simulation‐experimental approach is employed to study the decisive role of polymer‐air and polymer‐particle interfaces. Experimentally, the composite system consists of a cross‐linked polymer network with fluorinated‐dangling chains, embedding colloidal SiO₂ nanoparticles which are incorporated in the network via covalent bonding. These particles provide the desired surface structure at the air‐interface before and after damage. Any damage replicates the rough surface, while the polymer layer on top of the particles serves as source of low surface energy groups which are able to reorient towards the new air‐interfaces. Using coarse‐grained simulations details of these self‐replenishing composite systems are revealed such as the minimum thickness of the polymer layer necessary for providing optimal self‐replenishing ability and the distribution profile of the dangling chains at the various interfaces. The principles and dual approach reported here may be applied to other self‐healing composite systems with applications in self‐cleaning, anti‐fouling or low adhesion materials.     

Occult hepatitis B virus infection of hemodialysis patients: A cross‐sectional study in a hepatitis B virus‐endemic region

Occult hepatitis B virus (HBV) infection is defined as the presence of HBV DNA in the liver tissue and/or serum of subjects seronegative for hepatitis B surface antigen (HBsAg). Occult HBV infection of hemodialysis (HD) patients is informative in terms of virus transmission, reactivation after kidney transplantation, and the progression of liver disease. However, there is little detailed information about occult HBV infection in the context of virus endemicity. We tried to investigate the seroprevalence and clinical features of occult HBV infection in HD patients in HBV‐endemic regions. We enrolled a total of 159 HD patients and 121 apparently healthy subjects at Dankook University Hospital and Jeju National University Hospital in Korea. HBsAg, anti‐HBs, anti‐HBc, and anti‐hepatitis C virus (HCV) antibody levels were measured by radioimmunoassay. Serum levels of HBV DNA were measured by real‐time polymerase chain reaction. The seroprevalence of occult HBV infection was 1.3% in HD patients and 2.5% in the healthy controls. This difference was not significant. The HBV load in all subjects with occult infection was <116 copies/mL, and all were positive for IgG anti‐HBc, regardless of the presence of anti‐HBs. None of the occult HBV‐infected subjects were co‐infected with HCV. One of the 2 HD patients with occult HBV infection had no history of blood transfusion. In this HBV‐endemic region, the seroprevalence of occult HBV infection in HD patients with a very low viral load was not significantly different from that in apparently healthy subjects.     

Superhydrophobic Coatings on Cellulose‐Based Materials: Fabrication,Properties, and Applications

Wettability of a solid surface by a liquid plays an important role in several phenomena and applications, for example in adhesion, printing, and self‐cleaning. In particular, wetting of rough surfaces has attracted great scientific interest in recent decades. Superhydrophobic surfaces, which possess extraordinary water repelling properties due to their low surface energy and specific nanometer‐ and micrometer‐scale roughness, are of particular interest due to the great variety of potential applications ranging from self‐cleaning surfaces to microfluidic devices. In recent years, the potential of superhydrophobic cellulose‐based materials in the function of smart devices and functional clothing has been recognized, and in the past few years cellulose‐based materials have established themselves among the most frequently used substrates for superhydrophobic coatings. In this Review, over 40 different approaches to fabricate superhydrophobic coatings on cellulose‐based materials are discussed in detail. In addition to the anti‐wetting properties of the coatings, particular attention is paid to coating durability and other incorporated functionalities such as gas permeability, transparency, UV‐shielding, photoactivity, and self‐healing properties. Potential applications for the superhydrophobic cellulose‐based materials range from water‐ and stain‐repellent, self‐cleaning and breathable clothing to cheap and disposable lab‐on‐a‐chip devices made from renewable sources with reduced material consumption.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.     

Single‐Walled Carbon‐Nanotube Networks on Large‐Area Glass Substrate by the Dip‐Coating Method

Highly uniform and large‐area single‐walled carbon‐nanotube (SWNT) networks are realized by the dip‐coating method, which is based on fundamental fluid‐dynamic phenomena such as capillary condensation and surface tension. The changes in the polarity and hydration properties of the substrate affect the morphology of the SWNT networks and result in nonlinear growth of the networks in the repetitive dip‐coating process. The density and the thickness of the SWNT networks are controlled by processing variables including number of dip coatings, concentration of SWNT colloidal solution, and withdrawal velocity. The networks have uniform sheet resistances and high optical transmittance in the visible wavelength range.     

Untersuchung der Haftmechanismen kaltgasgespritzter Al‐Schichten auf Al2O3

The metallization of ceramics by means of cold gas spraying has been in the focus of numerous publications in the recent past. However, the bonding mechanisms of metallic coatings on non‐ductile substrates are still not fully understood. Former investigations of titanium coatings on corundum revealed that a combination of recrystallisation induced by adiabatic shear processes and heteroepitaxial growth might be responsible for the high adhesions strengths of coatings applied on smooth ceramic surfaces. In the present work, it is intended to examine the interface area of cold gas sprayed aluminum on alumina substrates. Besides a variation of powder fraction and substrate temperature, it is investigated if a downstream heat treatment has an influence on tensile strength and hardness of the coatings. The splat formation of single particles is investigated by means of scanning electron microscopy, while a high resolution transmission electron microscope is used to examine the Al/Al₂O₃ interface. First results suggest that mechanical clamping is the primary bonding mechanism on polycrystalline coatings with a sub‐micrometer‐scaled surface roughness, while heteroepitaxial growth is the main bonding mechanism for Al coatings on single‐crystalline, atomically smooth sapphire (α‐Al₂O₃) substrates. Heteroepitaxy is promoted by deformation‐induced recrystallisation of the cold gas‐sprayed aluminum.     

Laser‐Induced Graphene in Controlled Atmospheres: From Superhydrophilic to Superhydrophobic Surfaces

The modification of graphene‐based materials is an important topic in the field of materials research. This study aims to expand the range of properties for laser‐induced graphene (LIG), specifically to tune the hydrophobicity and hydrophilicity of the LIG surfaces. While LIG is normally prepared in the air, here, using selected gas atmospheres, a large change in the water contact angle on the as‐prepared LIG surfaces has been observed, from 0° (superhydrophilic) when using O₂ or air, to >150° (superhydrophobic) when using Ar or H₂. Characterization of the newly derived surfaces shows that the different wetting properties are due to the surface morphology and chemical composition of the LIG. Applications of the superhydrophobic LIG are shown in oil/water separation as well as anti‐icing surfaces, while the versatility of the controlled atmosphere chamber fabrication method is demonstrated through the improved microsupercapacitor performance generated from LIG films prepared in an O₂ atmosphere.     

Earthworm‐Inspired Rough Polymer Coatings with Self‐Replenishing Lubrication for Adaptive Friction‐Reduction and Antifouling Surfaces

Earthworms are able to pass through sticky soil without inducing stains through a self‐forming thick lubricating layer on their rough skins. To mimic this earthworm‐like lubricating capability, an attempt to create a textured structure on the surface of liquid‐releasable polymer coatings by a “breath figure” process is described herein. The resulting coatings exhibit fast and site‐specific release behavior under external triggers such as solid‐based friction. The released oil is then stabilized by the surface texture to form thick lubricating layers, reducing friction and enhancing wear resistance. Moreover, the coatings also exhibit excellent antifouling property in a sticky soil environment. Because the lubricating layer can be regenerated after consumption, the potential of this self‐replenished lubricating mechanism in preparing friction‐reduction, antiwear, and antifouling coatings used in solid‐based environments is therefore envisioned.     

Micro‐/Nanostructured Interface for Liquid Manipulation and Its Applications

Understanding the relationship between liquid manipulation and micro‐/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top‐down approach to the bottom‐up approach and subsequent surface modifications of micro‐/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro‐/nanostructured interface, with major applications in self‐cleaning, antifogging, anti‐icing, anticorrosion, drag‐reduction, oil–water separation, water collection, droplet (micro)array, and surface‐directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.     

Ballistic Jumping Drops on Superhydrophobic Surfaces via Electrostatic Manipulation

The ballistic ejection of liquid drops by electrostatic manipulating has both fundamental and practical implications, from raindrops in thunderclouds to self‐cleaning, anti‐icing, condensation, and heat transfer enhancements. In this paper, the ballistic jumping behavior of liquid drops from a superhydrophobic surface is investigated. Powered by the repulsion of the same kind of charges, water drops can jump from the surface. The electrostatic acting time for the jumping of a microliter supercooled drop only takes several milliseconds, even shorter than the time for icing. In addition, one can control the ballistic jumping direction precisely by the relative position above the electrostatic field. The approach offers a facile method that can be used to manipulate the ballistic drop jumping via an electrostatic field, opening the possibility of energy efficient drop detaching techniques in various applications.     

Surface‐Acoustic‐Wave‐Based Lab‐on‐Chip for Rapid Transport of Cryoprotectants across Cell Membrane for Cryopreservation with Significantly Improved Cell Viability

Cryopreservation is essential to effectively extend the shelf life of delicate biomaterials while maintaining proper levels of cell functions. Cryopreservation requires a cryoprotective agent (CPA) to suppress intracellular ice formation during freezing, but it must be removed prior to clinical use due to its toxicity. Conventional multistep CPA loading and unloading approaches are time consuming, often creating osmotic shocks and causing mechanical injuries for biological samples. An efficient surface‐acoustic‐wave‐ (SAW‐) based lab‐on‐a‐chip (LoC) for fast loading and removal of CPAs is presented here. With the SAW‐based multistep CPA loading/removal approach, high concentration (3 m ) CPA can be successfully loaded and removed in less than 1 min. Results show that the technique causes the least harm to umbilical cord matrix mesenchymal stem cells as compared to conventional method, and an average of 24% higher cell recovery rate is achieved, while preserving the integrity and morphology of the cells. This device is the first of its kind to combine high loading/unloading efficiency, high cell viability, and high throughput into one LoC device, offering not only a more efficient and safer route for CPA loading and removal from cells, but also paving the way for other cryopreservation‐dependent applications.     

Methoden zur mechanischen Charakterisierung von modifizierten Implantatoberflächen in der Orthopädischen Chirurgie

Methods for the mechanical characterisation of modified implant surfaces in orthopaedic surgery Nowadays, on average approximately 10 % of all hip and knee endoprostheses have to be exchanged within the first 10 years. Implant revision is often necessary following aseptic or septic loosening. Hence, today implants for orthopaedic surgery are increasingly being coated for better osseointegration. Coatings have to be biocompatible and meet high mechanical requirements, whereby the adhesive strength and the abrasive wear resistance of the coatings take on a key role. This study presents different methods to asses these parameters experimentally using two innovative coatings (TiN, TiO2‐Cu) exemplary. The adhesive bonding strength of the coatings was investigated using different standardised methods, such as the arbour bending test, scratch test and the standard adhesive test. Wear resistance was determined after 1.5 million cycles in a special testing machine. The investigations showed for both coatings, TiN and TiO2‐Cu, good adhesive strength and wear resistance. The adhesive strength and wear resistance of bio‐active, wear reducing or anti‐allergenic surface coatings can be determined reliably using the above‐mentioned methods.     

Two‐Dimensional Nanomaterials for Biomedical Applications: Emerging Trends and Future Prospects

Two‐dimensional (2D) nanomaterials are ultrathin nanomaterials with a high degree of anisotropy and chemical functionality. Research on 2D nanomaterials is still in its infancy, with the majority of research focusing on elucidating unique material characteristics and few reports focusing on biomedical applications of 2D nanomaterials. Nevertheless, recent rapid advances in 2D nanomaterials have raised important and exciting questions about their interactions with biological moieties. 2D nanoparticles such as carbon‐based 2D materials, silicate clays, transition metal dichalcogenides (TMDs), and transition metal oxides (TMOs) provide enhanced physical, chemical, and biological functionality owing to their uniform shapes, high surface‐to‐volume ratios, and surface charge. Here, we focus on state‐of‐the‐art biomedical applications of 2D nanomaterials as well as recent developments that are shaping this emerging field. Specifically, we describe the unique characteristics that make 2D nanoparticles so valuable, as well as the biocompatibility framework that has been investigated so far. Finally, to both capture the growing trend of 2D nanomaterials for biomedical applications and to identify promising new research directions, we provide a critical evaluation of potential applications of recently developed 2D nanomaterials.