Effect of coal blending ratio on CO<Subscript>2</Subscript> coke gasification

Coke gasification is largely influenced by the raw coal, catalyst, and blending ratios, pore structure, and specific surface area of the raw coal. In this study, several properties of cokes related to their reactivity were measured using coke reactivity test apparatus (CRTA), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Brunauer-Emmet-Teller (BET) surface area analysis, and energy dispersive X-ray spectroscopy (EDS) to investigate the characteristics of coke gasification. The results indicated that the reactivity of coke in the temperature range from 950 to 1,050 °C was affected by the type of coke and its specific surface area rather than the general properties of the coke, although the overall reactivities at the other temperatures were uniform. EDS analysis showed that the catalyst acted on the reactivity of cokes at low temperatures, whereas the BET analysis indicated that the reactivity at high temperature was influenced by the specific surface area.     

Kinetic study on carbonation of crude Li<Subscript>2</Subscript>CO<Subscript>3</Subscript> with CO<Subscript>2</Subscript>-water solutions in a slurry bubble column reactor

Investigations were conducted to purify crude Li₂CO₃ via direct carbonation with CO₂-water solutions at atmospheric pressure. The experiments were carried out in a slurry bubble column reactor with 0.05 m inner diameter and 1.0 m height. Parameters that may affect the dissolution of Li₂CO₃ in the CO₂-water solutions such as CO₂-bubble perforation diameter, CO₂ partial pressure, CO₂ gas flow rate, Li₂CO₃ particle size, solid concentration in the slurry, reaction temperature, slurry height in the column and so on were investigated. It was found that the increases of CO₂ partial pressure, and CO₂ flow rate were favorable to the dissolution of Li₂CO₃, which had the opposite effects with Li₂CO₃ particle size, solid concentration, slurry height in the column and temperature. On the other hand, in order to get insight into the mechanism of the refining process, reaction kinetics was studied. The results showed that the kinetics of the carbonation process can be properly represented by 1−3(1−X)^2/3+2(1–X)=kt+b, and the rate-determining step of this process under the conditions studied was product layer diffusion. Finally, the apparent activation energy of the carbonation reaction was obtained by calculation. This study will provide theoretical basis for the reactor design and the optimization of the process operation.     

A reaction kinetic study of CO<Subscript>2</Subscript> gasification of petroleum coke,coals and mixture

Characteristics of Char-CO₂ gasification were compared in the temperature range of 1,100–1,400 °C using a thermogravimetric analyzer (TGA) for petroleum coke, coal chars and mixed fuels (Petroleum coke/coal ratios: 0, 0.25, 0.5, 0.75, 1). The results showed that reaction time decreased with increasing gasification temperature, BET surface area and alkali index of coal. Mixed fuels composed of petroleum coke/coal exhibited reduced activation energies. Modified volumetric reaction model and shrinking core model might be suitably matched with experimental data depending on coal type and petroleum coke/coal ratio. Rate equations were suggested by selecting gas-solid reaction rate models for each sample that could simulate CO₂ gasification behavior.     

Simplified synthesis of K<Subscript>2</Subscript>CO<Subscript>3</Subscript>-promoted hydrotalcite based on hydroxide-form precursors: Effect of Mg/Al/K<Subscript>2</Subscript>CO<Subscript>3</Subscript> ratio on high-temperature CO<Subscript>2</Subscript> sorption capacity

Hydrotalcite was synthesized from hydroxide-form precursors to prepare a novel high-temperature CO₂ sorbent, and the effect of Mg/Al ratio on CO₂ sorption was studied. To enhance the CO₂ sorption capacity of the sorbent, K₂CO₃ was coprecipitated during the synthetic reaction. X-ray diffraction analysis indicated that the prepared samples had a well-defined crystalline hydrotalcite structure, and confirmed that K₂CO₃ was successfully coprecipitated in the samples. The morphology of the hydrotalcite was confirmed by scanning electron microscopy, and N₂ adsorption analysis was used to estimate its surface area and pore volume. In addition, thermogravimetric analysis was used to measure its CO₂ sorption capacity, and the results revealed that the Mg: Al: K₂CO₃ ratio used in the preparation has an optimum value for maximum CO₂ sorption capacity.     

Parametric study of pyrolysis and steam gasification of rice straw in presence of K<Subscript>2</Subscript>CO<Subscript>3</Subscript>

A parametric study of pyrolysis and steam gasification of rice straw (RS) was performed to investigate the effect of the presence of K₂CO₃ on the behavior of gas evolution, gas component distribution, pyrolysis/gasification reactivity, the quality and volume of synthetic gas. During pyrolysis, with the increase in K₂CO₃ content in RS (i) the instantaneous CO₂ concentration was increased while CO concentration was relatively stable; (ii) the yield of CO₂ and H₂ increased on the cost of CH₄. During steam gasification of RS, with the increase in K₂CO₃ content in RS (i) the instantaneous concentration of CO₂ and H₂ increased while instantaneous concentration of CO and CH₄ decreased; (ii) the yield of CO₂ and H₂ production and total yield increased; and (iii) yield of CO and CH₄ production followed the order: 9% K₂CO₃ RS<6% K₂CO₃ RS<raw RS<3% K₂CO₃ RS<water-leached RS. Water-leached RS showed the highest pyrolysis reactivity, while stream gasification reactivity was proportional to K₂CO₃ content in RS. The results of this study reveal that the presence of K₂CO₃ during pyrolysis and steam gasification of RS effectively improves production of H₂ rich gas.     

Effect of addition of weak acids on CO<Subscript>2</Subscript> desorption from rich amine solvents

Experiments were conducted to study the effect of addition of four weak acids (adipic, suberic, phthalic and sebacic acids) on the regeneration of three types of CO₂-loaded rich solvents (Monoethanolamine (MEA), Diethanolamine (DEA) and Methyldiethanolamine (MDEA)). It was found that CO₂ could be released faster and in a larger quantity when the amount of acid added to the solvent was increased while other desorption conditions were maintained unchanged. Adipic acid appeared to be more effective than phthalic, suberic and sebacic acids in enhancing solvent regeneration rate. Among the three amines investigated, MEA had the highest CO₂ desorption rate, while DEA saved the most energy. The effect of adipic acid residue in the MEA solvent on CO₂ absorption was also investigated. The residue acid reduced the absorption capacity of the MEA solvent significantly when the solvent concentration was low and slightly when the concentration was high.     

Separation characteristics of tetrapropylammoniumbromide templating silica/alumina composite membrane in CO<Subscript>2</Subscript>/N<Subscript>2</Subscript>, CO<Subscript>2</Subscript>/H<Subscript>2</Subscript> and CH<Subscript>4</Subscript>/H<Subscript>2</Subscript> systems

Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support ( γ-Al₂O₃/ α-Al₂O₃ composite) by dip coating and then heat-treated at 550 °C. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/ γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20–40 °C conditions and 0.0–1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂> CO₂> N₂> CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂> CH₄> CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Comparative kinetic study of coal gasification with steam and CO<Subscript>2</Subscript> in molten blast furnace slags

To make a comparison between coal gasification in molten blast furnace slag (MBFS) in different ambience and choose an appropriate agent to recover BF slag’s waste heat entirely, coal gasification with steam and CO₂ in molten blast furnace slags was studied by isothermal thermo-gravimetric analysis. The effects of temperature and addition of MBFS were studied. Carbon conversion and reaction rate increased with increasing temperature and MBFS. Volumetric model (VM), shrinking core model (SCM), and diffusion model (DM) were applied to describe the coal gasification behavior of FX coal. The most appropriate model describing the coal gasification was SCM in steam ambience and VM in CO₂ ambience, respectively. The reaction rate constant k(T) in CO₂ ambience is greater than that in steam ambience, which means the gasification reactivity of coal in CO₂ ambience is better than that in steam ambience. BF slag can effectively reduce the activation energy E_A of coal gasification reaction in different ambiences. But, the difference of activation energies is not large in different ambiences. Based on the results of kinetic analysis including k(T) and E_A calculated by the established model, CO₂ was chosen to be the most appropriate agent.     

Effect of water pretreatment on CO<Subscript>2</Subscript> capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor

A bubbling fluidized bed reactor was used to study CO₂ capture from flue gas by using a potassium-based solid sorbent, sorbKX35 which was manufactured by the Korea Electric Power Research Institute. A dry sorbent, sorbKX35, consists of K₂CO₃ for absorption and supporters for mechanical strength. To increase initial CO₂ removal, some amount of H₂O was absorbed in the sorbent before injecting simulated flue gas. It was possible to achieve 100% CO₂ removal for more than 10 minutes at 60°C and a residence time of 2 s with H₂O pretreatment. When H₂O pretreatment time was long enough to convert K₂CO₃ of sorbKX35 into K₂CO₃ · 1.5H₂O, CO₂ removal was excellent. The results obtained in this study can be used as basic data for designing and operating a large scale CO₂ capture process with two fluidized bed reactors. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Effect of CO<Subscript>2</Subscript> concentration on the performance of different thermodynamic models for prediction of CH<Subscript>4</Subscript>+CO<Subscript>2</Subscript>+H<Subscript>2</Subscript>O hydrate equilibrium conditions

Accurate prediction of phase equilibria regarding CH₄ replacement in hydrate phase with high pressure CO₂ is an important issue in modern reservoir engineering. In this work we investigate the possibility of establishing a thermodynamic framework for predicting the hydrate equilibrium conditions for evaluation of CO₂ injection scenarios. Different combinations of equations of state and mixing rules are applied and the most accurate thermodynamic models at different CO₂ concentration ranges are proposed.     

CO<Subscript>2</Subscript> methanation and co-methanation of CO and CO<Subscript>2</Subscript> over Mn-promoted Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

A series of Mn-promoted 15 wt-% Ni/Al₂O₃ catalysts were prepared by an incipient wetness impregnation method. The effect of the Mn content on the activity of the Ni/Al₂O₃ catalysts for CO₂ methanation and the comethanation of CO and CO₂ in a fixed-bed reactor was investigated. The catalysts were characterized by N2 physisorption, hydrogen temperature-programmed reduction and desorption, carbon dioxide temperature-programmed desorption, X-ray diffraction and highresolution transmission electron microscopy. The presence of Mn increased the number of CO₂ adsorption sites and inhibited Ni particle agglomeration due to improved Ni dispersion and weakened interactions between the nickel species and the support. The Mn-promoted 15 wt-% Ni/Al₂O₃ catalysts had improved CO₂ methanation activity especially at low temperatures (250 to 400 °C). The Mn content was varied from 0.86% to 2.54% and the best CO₂ conversion was achieved with the 1.71Mn-Ni/Al₂O₃ catalyst. The co-methanation tests on the 1.71Mn-Ni/Al₂O₃ catalyst indicated that adding Mn markedly enhanced the CO₂ methanation activity especially at low temperatures but it had little influence on the CO methanation performance. CO₂ methanation was more sensitive to the reaction temperature and the space velocity than the CO methanation in the co-methanation process.

Open image in new window

     

Effect of La as Promoter in the Photoreduction of CO<Subscript>2</Subscript> Over TiO<Subscript>2</Subscript> Catalysts

In this work, TiO₂ has been modified by treating it thermally together with different proportions (0.5–15 wt%) of La₂O₃. The resulting materials have been extensively characterized by XRD, TEM, N₂ adsorption isotherms, temperature-programmed CO₂ desorption, Raman, UV–Vis photoluminescence and X-ray photoelectron spectroscopies. The activity tests of these materials for the gas-phase photocatalytic reduction of carbon dioxide show that the main products of the reaction are in all cases CO and CH₄, together with H₂ from the parallel reduction of water. After the preparation procedure, La phases are best described as oxycarbonates, and lead to improved activity with respect to TiO₂ with La contents up to 5 wt%. Higher loadings do not, however, lead to further enhanced activity. Retarded electron–hole recombination and enhanced CO₂ adsorption are invoked as the key factors contributing to this activity improvement, which is optimized in the case of 0.5 wt% La leading to higher productions of CO and CH₄ and increased quantum efficiency with respect to titania.     

CO<Subscript>2</Subscript> capture using aqueous solutions of K<Subscript>2</Subscript>CO<Subscript>3</Subscript>+2-methylpiperazine and monoethanolamine: Specific heat capacity and heat of absorption

The specific heat capacity, heat of CCO₂ absorption, and CCO₂ absorption capacity of aqueous solutions of potassium carbonate (K₂CO₃)+2-methylpiperazine (2-MPZ) and monoethanolamine (MEA) were measured over various temperatures. An aqueous solution of K₂CO₃+2-MPZ is a promising absorbent for CCO₂ capture because it has high CCO₂ absorption capacity with improved absorption rate and degradation stability. Aqueous solution of MEA was used as a reference absorbent for comprison of the thermodynamic characteristics. Specific heat capacity was measured using a differential scanning calorimeter (DSC), and heat of CCO₂ absorption and CCO₂ absorption capacity were measured using a differential reaction calorimeter (DRC). The CCO₂-loaded solutions had lower specific heat capacities than those of fresh solutions. Aqueous solutions of K₂CO₃+2-MPZ had lower specific heat capacity than those of MEA over the temperature ranges of 303-353 K. Under the typical operating conditions for the process (CCO₂ loading=0.23mol-CCO₂·mol^?1-solute in fresh solution, T=313 K), the heat of absorption (?ΔHabs) of aqueous solutions of K₂CO₃+2-MPZ and MEA were approximately 49 and 75 kJ·mol-CO₂, respectively. The thermodynamic data from this study can be used to design a process for CCO₂ capture.     

A semiempirical study of CO<Subscript>2</Subscript> elimination in cationic polymerization of cyclic carbonates

The reaction paths of 1,3-dioxan-2-one during cationic ring-opening polymerization have been explored by AM1 semiempirical calculations. A species evolution diagram has been established, and the propagation chain ends on the ether-oxygen of carbonyl functional groups have been identified as the species that ultimately lead to decarboxylation. Three measures were proposed to reduce the degree of decarboxylation based on theoretical calculations: increasing the monomer concentration; decreasing the solvent polarity; and altering the ring substituents so as to bypass the decarboxylation route. Experimental investigations on a number of substituted DOO (including 4-vinyl-1,3-dioxan-2-one and its derivatives) support this conclusion.     

A Novel Process for Renewable Methane Production: Combining Direct Air Capture by K<Subscript>2</Subscript>CO<Subscript>3</Subscript>/Alumina Sorbent with CO<Subscript>2</Subscript> Methanation over Ru/Alumina Catalyst

CO₂ methanation over supported ruthenium catalysts is considered to be a promising process for carbon capture and utilization and power-to-gas technologies. In this work 4% Ru/Al₂O₃ catalyst was synthesized by impregnation of the support with an aqueous solution of Ru(OH)Cl₃, followed by liquid phase reduction using NaBH₄ and gas phase activation using the stoichiometric mixture of CO₂ and H₂ (1:4). Kinetics of CO₂ methanation reaction over the Ru/Al₂O₃ catalyst was studied in a perfectly mixed reactor at temperatures from 200 to 300 °C. The results showed that dependence of the specific activity of the catalyst on temperature followed the Arrhenius law. CO₂ conversion to methane was shown to depend on temperature, water vapor pressure and CO₂:H₂ ratio in the gas mixture. The Ru/Al₂O₃ catalyst was later tested together with the K₂CO₃/Al₂O₃ composite sorbent in the novel direct air capture/methanation process, which combined in one reactor consecutive steps of CO₂ adsorption from the air at room temperature and CO₂ desorption/methanation in H₂ flow at 300 or 350 °C. It was demonstrated that the amount of desorbed CO₂ was practically the same for both temperatures used, while the total conversion of carbon dioxide to methane was 94.2–94.6% at 300 °C and 96.1–96.5% at 350 °C.     

Self-Metathesis of 1-Octene Using Alumina-Supported Re<Subscript>2</Subscript>O<Subscript>7</Subscript> in Supercritical CO<Subscript>2</Subscript>

In this contribution we describe the use of heterogeneous catalysts for the liquid-phase self-metathesis of 1-octene in supercritical CO₂. Our work aims at addressing the mass-transfer problems associated with such reaction systems. By coupling a heterogeneous supported Re₂O₇ catalyst with the use of scCO₂, the self-metathesis of 1-octene takes place by and large much more rapidly than in traditional solvent media, and furthermore, by using scCO₂ the overall efficiency and sustainability of the transformation can be improved.

CO<Subscript>2</Subscript> geological storage: A review on present and future prospects

CO₂ can be stored in geological media for hundreds to thousands of years depending on the location and trapping mechanism(s) involved. A saline aquifer presents the largest capacity available for CO₂ storage among all geological storage options. Two main methodologies proposed by the Department of Energy, US (DOE) and carbon sequestration leadership forum (CSLF) are used for capacity estimation of geological locations for CO₂ storage. A study conducted by Global CCS Institute in 2010 identified 80 large scale integrated projects which will prove to be a huge step in building confidence and commercialization of storage projects in the near future. Use of reliable monitoring tools and accurate simulation software is a must for safe and cost-effective CO₂ storage.     

Dye sensitized CO<Subscript>2</Subscript> reduction over pure and platinized TiO<Subscript>2</Subscript>

TiO₂ thin and thick films promoted with platinum and organic sensitizers including novel perylene diimide dyes (PDI) were prepared and tested for carbon dioxide reduction with water under visible light. TiO₂ films were prepared by a dip coating sol–gel technique. Pt was incorporated on TiO₂ surface by wet impregnation [Pt(on).TiO₂], or in the TiO₂ film [Pt(in).TiO₂] by adding the precursor in the sol. When tris (2,2′-bipyridyl) ruthenium(II) chloride hexahydrate was used as sensitizer, in addition to visible light activity towards methane production, H₂ evolution was also observed. Perylene diimide derivatives used in this study have shown light harvesting capability similar to the tris (2,2′-bipyridyl) ruthenium(II) chloride hexahydrate.