用饲养层分离胚胎干细胞集落的实验初探

目的 用饲养层分离胚胎干细胞集落。方法 用胚龄为13~14 d的小鼠胚胎分离原代成纤维细胞,制成饲养层,用于囊胚的培养。结果 小鼠原代胚胎成纤维细胞（PMEF）贴壁能力较好,增殖快,易铺层。囊胚和内细胞团（ICM）在饲养层上贴壁生长良好,当培养4~5 d时,其增殖率为16/28（57%）。在ICM离散48 h后,各种胚胎干细胞（ES）集落开始出现。此种集落经碱性磷酸酶染色成阳性。结论 用饲养层分离胚胎干细胞获得初步成功。     

BALB/c小鼠胚胎干细胞系建立的方法学探讨

以小鼠胚胎成纤维细胞（ME）为饲养层,以大鼠心脏细胞条件下培养基（RH－CM）为ES细胞培养基,全面、详尽地对BALB／c小鼠ES细胞的纱和培养方法进行了探讨,成功地建立了一套建立和培养BALB/c小鼠ES细胞系的新方法。这一培养条件不但有效地维持了ES细胞的未分化状态和正常二倍体核型,而且维持了其作为能性胚胎干细胞的一系列特征。实验设计了两种离散方法和两种浓度的消化兴,用来离散增殖的ICM和ICM离散后出现的ES集落。两种离散方法即“一次离散法”,和“多次离散法”,两种浓度的消化液即0．25％。Trypsin－0．04％。EDTA和．005％。Trypsin-0.888％EDTA;同时对ICM离散时机、RH－CM在BALB／c小鼠ES细胞建系和培养中作用进行了探讨。结果表明：在低浓度消化液作用下,采用“多次离散法”离散增殖4天的ICM和ES集落的方法建立BALC／c小鼠的ES细胞系是理想的;从细胞形态、集落形态、增殖生长能力、核型检测、碱性磷酸酶测定以及体内外分化能力表明,所建立的9个BALB/c小鼠ES细胞系符合小鼠胚胎干细胞的一系列特征。     

免疫外科法分离克隆BALB/c小鼠胚胎干细胞

目的　使用免疫外科法分离克隆BALB c小鼠胚胎干细胞 (embryonicstemcells,ES细胞 ) ,为进一步建立BALB c小鼠ES细胞系打下基础。方法　用免疫外科法从 4 5枚BALB c小鼠囊胚中分离得到 2 0枚去除滋养层细胞的ICM ,接种在MEF饲养层上 ,使用DMEM(高糖 ) 15 ?S 0 1mmol Lβ 巯基乙醇 0 0 1mmol L非必需氨基酸 10 0 0IU mlLIF 10 0IU mL青霉素 10 0IU ml链霉素培养液 ,17枚形成典型的ICM集落 (85 0 % ) ,有一枚胚胎传至第 10代。用于全胚培养的BALB c小鼠胚胎共 10 2枚 ,使用与免疫外科相同的培养方法 ,6 6枚形成典型的ICM集落 (6 4 7% ) ,其中一枚胚胎传至第 8代。结果　免疫外科法较全胚培养法有利于小鼠ES细胞的分离与克隆 ;添加LIF(10 0 0IU ml)有利于小鼠ES细胞的分离与传代 (P <0 0 5 ) ;0 0 5 %胰酶 0 0 0 8?TA是较好的ES细胞消化液 ,对细胞综合损伤力小 ,且传代后ES细胞集落形成能力也较高 (P <0 0 5 )。结论　分离得到的ES细胞经形态学观察 ,AKP染色 ,体外分化实验 ,核型分析等证明其具有胚胎干细胞的诸多特性。     

建立小鼠胚胎多能干细胞系（ES细胞系）的几个主要影响因素

本文系统地比较了影响建立小鼠胚胎多能干细胞系的几个主要因素。对825个胚的实验进行了分析,其结果表明:延迟囊胚的主要作用是有助于内细胞团(ICM)的增殖;高糖的DMEM有助于囊胚贴壁及ICM的增殖;不含丙酮酸钠的DMEM对ES细胞的集落形成和生长是有利的;饲养层对ES细胞的建系和培养是十分重要的,以新鲜制备的原代小鼠胚胎成纤维细胞作为饲养层对ES细胞的生长有明显的促进作用。     

分离和克隆小鼠ES细胞集落的主要影响因素

目的　研究不同培养条件分离和克隆小鼠ES细胞集落的效率。方法　以PMEF饲养层、NIH3T3细胞饲养层或培养液中加入LIF为培养条件 ,分离和克隆昆明小鼠ES细胞集落 ,比较其效率。结果　饲养层的培养条件明显优于培养液中加入LIF的培养条件 ;有饲养层的培养条件下 ,桑椹胚的ES细胞集落出现率显著低于囊胚 ;两种饲养层培养囊胚 ,其ES细胞集落的出现率差异无显著性。结论　以PMEF或NIH3T3细胞作饲养层 ,培养昆明小鼠的囊胚 ,适时离散ICM ,是比较理想的分离ES细胞集落的方法。     

一种简便的小鼠精原干细胞分离培养方法

采用一步酶消化法分离小鼠精原干细胞,比较α-MEM、DMEM培养基对体外培养的精原干细胞生长状态的影响,对精原干细胞集落进行形态观察、碱性磷酸酶(alkaline phosphatase,AKP)染色和免疫组化鉴定,并诱导精原干细胞向精子细胞分化。结果显示,以小鼠胚胎成纤维细胞作为饲养层,用α-MEM培养的精原干细胞集落较大且呈葡萄串状或念珠状,细胞状态较好;小鼠精原干细胞集落的AKP染色阳性呈紫红色;在红色荧光下精原干细胞集落的Oct-4核蛋白表达为阳性、膜蛋白c-Kit、β_1-integrin和Gfrα-1表达为阳性;精原干细胞经维甲酸(all-trans-retinoic-acid,RA)诱导可初步分化成精子样细胞。因此,采用一步酶消化法能够分离小鼠精原干细胞,α-MEM更适合小鼠精原干细胞体外培养。     

615小鼠ES细胞集落的分离及初步鉴定

目的　分离和培养 6 15小鼠的ES细胞集落 ,为建系打下基础。方法　以PMEF为饲养层分离 6 15小鼠的ES细胞集落 ,进行无饲养层培养 ,并对其进行初步鉴定。结果　ES细胞集落的出现率和传代成功率为 2 2 6 %和 0 94 % ,其ALP染色阳性 ,具有稳定的二倍体核型 ,可自发分化为多种类型的细胞。结论　成功分离和培养了6 15小鼠的ES细胞集落     

改进的培养体系在小鼠体细胞核移植及重构胚ES细胞分离培养中的应用

取8周后的雌性昆明小鼠进行超排,取卵母细胞用作核受体,收集卵母细胞周围的卵丘细胞作核供体,进行体细胞核移植。核移植重构胚经SrCl2激活处理6h后,与改良的M16培养液和小鼠输卵管上皮细胞共培养;将发育到早期囊胚阶段的重构胚转移至小鼠胎儿成纤维细胞饲养层上,添加含心肌细胞培养液的ES细胞培养液;把孵出的ICM进行消化接种培养,对孵出的ES细胞集落进行鉴定培养。结果显示,以小鼠卵丘细胞为核供体,体细胞核移植重构胚激活率为65．23％,囊胚发育率为11．69％;9个核移植重构囊胚中分离出ES细胞集落,分离率为2．77％;分离出的核移植ES细胞集落具有岛屿状团状隆起结构、碱性磷酸酶染色呈阳性,体外分化可形成类胚体,并能分化成上皮样或梭形细胞。ES细胞集落经常规冻存和复苏后,显示出同冻存前相似的集落形态,并具有较强的增殖能力。实验证实小鼠输卵管上皮细胞、改良的M16培养液及含心肌细胞培养液的ES细胞培养液可以更为成功地运用于小鼠的体细胞核移植及ES细胞的分离培养研究。     

人胚胎干细胞传代培养及细胞化学染色特性

目的 体外建立人胚胎干细胞传代培养方法,研究人胚胎干细胞细胞化学染色特性.方法 以小鼠胚胎成纤维细胞作为饲养层传代培养人胚胎干细胞,检测人胚胎干细胞、自发分化克隆及拟胚体的细胞化学染色特性.结果 人胚胎干细胞在小鼠胚胎成纤维细胞饲养层上传30代以上其形态保持不变;人胚胎十细胞碱性磷酸酶、过碘酸-雪夫反应、α-醋酸萘酚酯酶染色阳性,自发分化克隆细胞阳性程度明显减弱;人胚胎干细胞形成的拟胚体碱性磷酸酶染色弱阳性,过碘酸-雪夫反应、α-醋酸萘酚酯酶染色阳性.结论 小鼠胚胎成纤维细胞能支持人胚胎干细胞传代培养,细胞化学染色结果能初步鉴别人胚胎干细胞未分化特性.     

5个品系小鼠胚胎干细胞系建立的方法学比较

以70％的大鼠心脏细胞条件培养基(RH-CM)为培养液,以小鼠胚胎成纤维细胞(PMEF)为饲养层,采用添加1％鸡血清的消化液和“连续离散法”作为小鼠Es细胞建系的改进方法,比较了5个品系小鼠ES细胞系建立的特点。与常规方法相比,3个近交系小鼠129／ter、C57BL/6J、BALB／c的ES细胞建系率分别由11．8％、3．7％和2．9％提高到33．3％、13．3％和19．4％,差异十分显著;直接采用改进的方法建立KM和ICR小鼠ES细胞系,建系率分别达12％和42．1％。讨论了ICM增殖的时间,即离散时机对ES集落形成及建系率的影响,结果显示：129／ter、C57BL/6J、BALB／c、KM和ICR小鼠品系ICM适宜的离散时机分别为增殖4～6d、3～3．5d、4d、4～5d和4～5d;同时,讨论了不同ES细胞建系所需最适宜的消化液浓度,其中BALB／c小鼠的ES细胞对高浓度的消化液十分敏感,0．05％Trypsin-0．008％EDTA是其比较理想的离散浓度。设计了两种离散方法,即“一次离散法”和“连续离散法”,用来离散增殖的ICM和ICM离散后出现的ES集落,结果表明：后者在建系过程中的作用明显优于前者。RH-CM与添加uF的常规ES细胞培养基相比,不但具有显著抑制小鼠ES细胞分化、维持其二倍体核型的作用,而且明显促进ES细胞的贴壁生长。新建细胞系鉴定结果表明,这一改进方法有效地维持了其作为多能性胚胎干细胞的一系列特征。     

昆明小鼠胚胎干细胞的体外分离培养

利用昆明小鼠13.5dpc的胚胎制备小鼠胚胎成纤维细胞,并以小鼠胚胎成纤维细胞作为饲养层;收集3.5dICR小鼠的囊胚和桑椹胚进行体外培养,筛选纯化ES细胞集落,使其稳定传代后,对其形态学和生物学性状进行初步鉴定,获得阳性细胞集落。     

Production of mouse by inter-strain inner cell mass replacement

The developmental ability of reconstructed blastocysts from C57BL/6 strain mouse inner cell masses (ICMs) and Kunming strain mouse trophoblasts was assessed. The procedure of ICM replacement was as follows: C57BL/6 ICMs were separated from the blastocysts using immunosurgery. A slit was made in the zona pellucida of a Kunming blastocyst to allow its ICM to extrude. The C57BL/6 ICM was injected into the Kunming blastocoele, and the extruded Kunming ICM was cut off. The reconstructed blastocysts were able to re-expand (77%) and hatch (27.3%) in vitro. A total of 64 reconstructed blastocysts and 124 Kunming blastocysts were co-transferred into the uteri of 11 pseudopregnant Kunming mice, and an ICM replacement offspring was born. The results indicate that reconstructed embryos obtained by inter-strain ICM replacement have the ability to develop to term. This technique may provide a method to solve the pregnancy failure in interspecific cloning.     

远交系小鼠胚胎干细胞系的建立及嵌合鼠的获得

ＥＳ细胞（ＥｍｂｒｙｏｎｉｃＳｔｅｍＣｅｌｌｓ）是来源于小鼠早期胚胎的多潜能干细胞,它可以在体外大量培养。并以单细胞的形式注射到早期胚胎里,发育为嵌合体。到目前为止,通常使用的１２９小鼠品系是来源于近交系（ｉｎｂｒｅｄ）小鼠的胚胎．与之相比,远交系小鼠应当具有较强的生命力和抗病能力。曾有人报道过建成了远交系小鼠胚胎干细胞系,但是尚没有见到获得嵌合鼠的报道。有人甚至认为：由于不同品系小鼠所具有的遗传背景不同,有的小鼠不能建成ＥＳ细胞系。最近,本实验室在这方面做了有益的探索,成功地建成了远交系小鼠胚胎干细胞系,并在这里报导首例用远交系小鼠胚胎干细胞系培育成功嵌合体小鼠。采用源于Ｓｗｉｓｓ小鼠远交群的昆明（ＫＭ）品系小鼠囊胚建成了三个小鼠胚胎干细胞系（ＫＥ１．ＫＥ２．ＫＥ５）。核型正常率均达到７０％以上。自第八代起分批冻存,复苏后,培养至第１２代,消化成单细胞,通过囊胚显微注射,将其注射到６１５品系小鼠胚胎。在幸存的幼鼠中获得了一只来源于ＫＥ１细胞的嵌合鼠（Ｔａｂｌｅ１）．其毛色表现为受体鼠（６１５）的白色中嵌合有供体鼠（ＫＭ）的黑褐色（ＰｌａｔｅＩ－Ａ）．嵌合鼠与受体鼠的杂交后代鼠中仍然出现了受体鼠的毛色类型（     

品系对小鼠胚胎干细胞分离效率的影响

为了充分利用小鼠胚胎干(ES)细胞,就必须从众多小鼠品系中分离ES细胞系。本研究通过传统的成纤维细胞饲养层法,从CD-1、129/Sv、C57BL/6J和129/Sv×C57BL/6J四种不同遗传背景的小鼠中分离得到12个ES细胞系,而从KM小鼠没有得到ES细胞系。所有的ES细胞系都具有典型的ES细胞特征,AKP染色呈阳性。从四种不同遗传背景的ES细胞系得到了包含多种组织的畸胎瘤;与桑椹胚聚合后,都得到了生殖系嵌合体。结果表明:品系对小鼠ES细胞的分离有显著影响,利用129小鼠以及包含129小鼠遗传背景的杂交小鼠都较容易分离ES细胞,由ES细胞得到生殖系嵌合体的效率在不同品系间有显著差异,从杂交ES细胞比近交ES细胞中更容易得到生殖系嵌合体。     

Easy assessment of ES cell clone potency for chimeric development and germ-line competency by an optimized aggregation method.

Production of germ-line competent chimeric mice from embryonic stem (ES) cells is an inevitable step in establishing gene-manipulated mouse lineages. A common method used for creating chimeric mice is the injection of ES cells into the blastocoelic cavity (blastocyst injection). The aggregation method is an alternative way to introduce ES cells to the host embryo which is less difficult than blastocyst injection. Here we re-examined the condition of embryo-ES cell coculture on the aggregation method and found improvement of germ-line competent chimeric production by a simple modification of the coculture medium. Moreover, R1 ES cell and its 10 gene-manipulated subclones were tested by this method. Although all ES cell clones showed good morphology and a normal karyotype, the efficiency of chimeric development and germ-line transmission varied among clones and were classified into three grades according to germ-line competency. In the first group (class A), both the incidence of chimera with high ES cell contribution and the rate of germ-line transmission were fairly high. Germ-line competent chimeras were obtained but with rather low efficiency in the second group (class B), while another group (class C) showed an absence of high ES cell-contributed chimeras and no germ-line transmission. These results suggest the usefulness of this modified aggregation method to predict the potency of ES cell clones for germ-line competency.     

Isolation of embryonic stem (ES) cells in media supplemented with recombinant leukemia inhibitory factor (LIF)

The isolation of pluripotent murine embryonic stem (ES) cells has previously been achieved by coculturing the ES cells with fibroblast feeder cells. In this report we demonstrate that ES cell lines can be isolated from murine 129/Sv He blastocysts in the absence of feeder cells in culture medium supplemented with recombinant leukemia inhibitory factor (LIF). Three of the ES cell lines (MBL-1, MBL-2, and MBL-3) were isolated by directly explanting blastocysts, whilst two ES cell lines (MBL-4 and MBL-5) were isolated from blastocysts pretreated by immunosurgery. Three of the ES cell lines contained the Y chromosome (MBL-1, MBL-2, and MBL-5) with a high proportion of the cells displaying a normal diploid karyotype with a modal chromosome number of 40. All of the ES cell lines tested expressed the stem cell markers ECMA-7 and alkaline phosphatase, which were lost on removal of LIF when the ES cells differentiated into a variety of cell types. The full developmental potential of the ES cells was determined by injecting cells from two of the independently derived ES cell lines, MBL-1 and MBL-5, into C57BL/6J blastocysts. A high proportion of the pups born were chimeric as judged by coat pigmentation. Subsequent breeding established that the ES cells had contributed to the germ line. These results demonstrate that feeder cells are not essential for the isolation of pluripotent ES cell lines.     

Pluripotent Embryonal Stem Cell Lines Can Be Established from Disaggregated Mouse Morulae

Mouse pluripotent embryonal stem ( ES ) cell lines hitherto have been conventionally isolated from the 'inner cell mass' of mouse blastocysts. In this report, I describe a new and simplified method for establishing pluripotent cell lines from mouse morulae of the 16- to 20-cell stage, which were disaggregated by the use of EDTA. From 17 cell lines established in such a way, 7 were characterized with respect to their differentiation potential:
(i) When injected into syngeneic mice, the cells gave rise to solid, fully differentiated teratomas representing derivatives of all three germ layers. (ii) When cultured in suspension in vitro, the cells were able to differentiate into complex organized 'embryoid bodies' analogous to mouse early postimplantation embryos. These results strongly imply that embryonal stem cell lines isolated from mouse morulae are highly homologous to conventionally isolated ES cells.
In addition, my results indicate that murine pluripotent embryonal stem ( ES ) cell lines can be derived with more ease and higher efficiency from disaggregated morulae than from the 'inner cell mass' of blastocysts.     

Three inhibitors of FGF receptor,ERK, and GSK3 establishes germline‐competent embryonic stem cells of C57BL/6N mouse strain with high efficiency and stability

C57BL/6 mouse is the most standard strain in mouse genetics. The strain does, however, have several disadvantages; one being the difficulty in establishing embryonic stem (ES) cells. No reliable C57BL/6 ES cell line is widely available for creating mutant mice through gene targeting. It also greatly favors mouse genetics if one can routinely make multiple mutations by stably culturing germline‐competent C57BL/6 ES cells or if one can routinely establish ES cells from C57BL/6‐derived mutant mice to make multiple mutations. Recently, an ES culture method with three inhibitors (3i: SU5402 for FGFR, PD184352 for ERK, and CHIR99021 for GSK3) has been reported. Here we show that this 3i method is extremely instrumental in establishing and culturing germline‐competent ES cells in the C57BL/6N strain. genesis 48:317–327, 2010. © 2010 Wiley‐Liss, Inc.