应用电阻率层析成像探测采空区、斜风井巷道稳定性计算

采用电阻率层析成像二维测量的方法,对河南省义马市义马煤业(集团)2×50MW跃进电厂采空区和斜风井巷道进行了勘探,获取了采空区、影响区以及斜风井巷道的准确位置.说明,电阻率层析成像二维测量的方法在采空区和斜风井巷道的探测中是行之有效的;煤矿采空区和斜风井巷道内在没有水体存在时,电阻率层析成像二维测量成果图中反映的一般都是高阻异常封闭圈.如果有水体存在,其异常则表现为低阻异常封闭圈.同时,根据该区的地质构造、地层结构、地面建筑的有关参数等资料,分析和计算了斜风井巷道的稳定性和安全性.结果表明,①主控楼受斜风井巷道的影响较大,是不稳定的,也是不安全的,必须采取妥善的加固措施;②主厂房不受斜风井巷道的影响,是稳定的,可以不采取加固措施.     

高密度电阻率二维层析成像在郯庐断裂带山东潍坊段试验结果的初步分析

在城市活断层调查中,利用电阻率二维层析成像测量方法,对郯庐断裂带山东潍坊段的地震活断层进行了探测试验,取得了较理想的勘探效果。沂水-汤头断裂、刘家庄断裂的二维电阻率反演结果表明,断裂带两侧的电性结构呈现出整体性的差异,正断层的上盘为低阻区和局部高、低阻扰动区;而断层下盘多为均匀的高阻区;断层为高角度断层。试验探测表明:在城市活断层调查中,选用合适的电极装置类型,电阻率层析成像是一种有效的勘探方法     

乌鲁木齐碗窑沟断层电阻率成像探测与探槽剖面的对比研究

利用电阻率二维层析成像方法对碗窑沟断层进行了试验探测,获得了该断层典型的电阻率成像异常特征:地层电性结构存在强间断面,呈现明显的"二分"现象,高、低阻间的梯度界线倾向低阻区。在对乌鲁木齐地区其它具有类似构造特征的断层进行探测时,电阻率成像剖面呈现出相似的异常特征,说明这一异常特征可以作为乌鲁木齐地区判定断层的重要标志和依据。乌鲁木齐地区多为高角度的逆冲断层,此类构造电阻率成像剖面中高、低阻之间的界线与断层并不重合,断层处于高阻区域,倾向与视电阻率衰减梯度线倾向相反,断层的真实位置与图像最上部高、低电阻转折的拐点部位最接近     

基于边界积分方程的“准三极”法阻率层析成像

基于边界积分方程 ,提出了依据二极采样数据、但利用电位差的某种线性组合的“准三极”电阻率层析成像方法 .研究表明 ,该方法不仅较好地解决了对高阻异常体的成像问题 ,而且使低阻异常体的成像质量获得了明显改善和提高 ,因此增强了电阻率层析成像技术的实用性 .     

基于边界积分方程的"准三极"法电阻率层析成像

基于边界积分方程,提出了依据二极采样数据、但利用电位差的某种线性组合的"准三极"电阻率层析成像方法.研究表明,该方法不仅较好地解决了对高阻异常体的成像问题,而且使低阻异常体的成像质量获得了明显改善和提高,因此增强了电阻率层析成像技术的实用性.     

CSAMT测深和重力测量技术在哈密白山钼矿深部找矿和远景评价中的应用

针对隐伏金属矿产勘查的深度逐渐加大、勘查区逐渐向工作程度相对较低、情况更加复杂的山区转移,常规的单一的物探方法在勘探深度及精度等方面都已经无法满足目前勘查的需要.本文提出可控源音频大地电磁测深法(CSAMT)与重力测量(GS)的技术组合,并将其运用于新疆哈密白山钼矿勘查实践中.哈密白山钼矿深孔在1400m以下的深部验证了隐伏花岗岩体的存在,证实白山钼矿属于斑岩型钼矿.岩体顶盖碎裂角岩化带是热接触变质的产物,含矿物质来源于深部岩浆热液.CSAMT测深和重力测量能较好地反映隐伏花岗岩体的就位空间和大致的侵入界线,深部隐伏花岗岩显示高阻高重力异常,中低阻异常围绕高阻高重异常周边分布,钻探验证在高阻异常顶部200～2500Ωm中低阻异常区间对应的是钼矿层位.依据钻探工程对隐伏花岗岩和钼矿层的控制,对应CSAMT测深剖面似电阻率等值线区间,大致推断隐伏花岗岩的侵入顶界和定位预测深部的钼矿赋存空间.白山钼矿的预测远景资源量可达200万吨以上.     

大地电磁局部畸变异常特征三维数值模拟研究

局部畸变问题曾经困扰大地电磁资料反演解释几十年,大地电磁三维数值模拟技术的发展为剖析局部畸变特点和得到可靠的反演成像结果提供了技术基础。本文采用三维数值模拟成像方法对典型三维局部畸变模型进行模拟分析。三维数值模拟结果显示:电场分量垂直电性分界面的极化模式视电阻率曲线(对应二维情况下TM模式)在穿越低阻异常体界面时,曲线会先上移后下移,而在穿越高阻异常体界面时,曲线会先下移后上移,这与电性分界面处积累面电荷产生的二次电场有关。三维模型中XY模式、YX模式视电阻率和相位在三维异常体附近的水平变化是呈现近似垂向对称的,该现象与电场垂直跨越电性界面时视电阻率的变化规律是吻合的,当测线分别沿X方向和Y方向展布时,三维情况下的XY和YX模式分别对应二维情况下的TM模式。低阻小异常体对区域构造响应的畸变影响比高阻小异常体要严重。低阻小异常体对二维区域响应的两种极化模式视电阻率和相位都有非常明显的畸变影响,相比较而言对TE模式的畸变要大于TM模式,因此我们在做二维反演解释时,可优先考虑拟合TM模式数据。位于小异常体中心上方测点的三维畸变响应虽然与对应真实二维区域响应的差异比较大,但可以等效于某种二维模型响应,这种由局部畸变造成的假二维响应在实际野外数据的解释中是需要注意的。      

基于航空大地电磁倾子特征的二维大地结构探测方法

倾子是航空大地电磁方法的主要参数,在地下异常体的探测中有着重要的作用和显著优势.本文简要概括了倾子测量的基本原理;基于有限单元法进行了二维大地结构的倾子建模仿真,分析了影响倾子响应特征的主要因素,包括空间性参数以及地下介质参数.通过对倾子响应特征影响因素的分析,提出了一种利用倾子及其梯度的异常位置和异常幅度,对地下二维异常体的电性特征、水平位置、埋深以及电阻率进行快速、定量识别的方法.最后,利用已知模型的倾子响应对异常体参数进行了试算,通过对试算结果和已知模型参数的对比,验证了该方法的可行性.     

电阻率图像中的地下水和断层

目的：将电阻率层析成像应用于探测潜伏断层的研究中，本文发现了断层和地下水的一些基本电阻率分布特征，这对于工程物探意义重大，一般情况下，断层两侧具有不同的电阻率特征，但是，根据电阻率层析图像中的电阻率分布，通常难以区分断层和地下水层，这是因为两者不仅都具有低电阻率值，而且还具有非常相似的电阻率异常特征。资料和方法：运用电阻率层析图像的数据，电阻率层析图像中的断层会呈现如下特征：1）由于孔隙度的加大和地下水的存在，使得断层表现出高角度的低阻线性结构。它们既可以出现在浅部盖层中，也可以存在于深部基岩中，特别是在深部区域，它们尤为明显；2）它们还呈现出高角度的线性梯度带，在该梯度带两边的电阻率结构出现整体性的差异，通常情况下，正断层的上盘表现出低阻或／和班驳状的高阻和低阻扰动区，而下盘则为完整的高阻区，这与逆冲断层正好相反；3）与断层有关的电阻率异常区常常具有良好的大尺度水平连续性，并且可以追瞎异常区附近的精细电性结构。而地下水的电阻率特征为：1）如果没有裂隙，地表水所引起的低阻区非常浅，即使存在丰富的水源以及高孔隙度的砾岩和中粗砂。一般情况下，其底端深度不超过强风化区；2）地下水的电阻率值非常低，特别在高矿化度的地区。地下水，包括岩溶水和砂岩水，的电阻率总显示出局部水平延伸或／和面团状特征；3）地下水层的深度朝某个固定方向逐渐增加，并且其电阻率图像会随季节而变；4）一般情况下，在水下渗的地区，会出现降水漏斗，其上部为高阻，而下部为低阻，从而便形成了“Y”或“V”字型的典型结构。结果：利用上述的基本特征一般可以区分断层和地下水。结论：仅依靠电阻率层析图像，可能极难准确地区分断层和裂隙水，这是因为裂隙水不但可能具有高角度的低阻线性结构，而且在一定尺度上具有很好的水平连续性，还有，由于电阻率层析成像较差的垂直分辨率，难以精确确定断层的上端点位置，所以结合其它的物探手段如钻探和浅层地震勘探是非常必要的。     

基于边界积分方程的2维电阻率层析成像

提出了一种新的二维电阻率层析成像方案。与国内外已有成像方法相比,该方法无需计算雅可比矩阵,不必要作线性化近似,这不仅节省了计算时间,而且使成像迭代过程,稳定,可以对实际上广泛存在的大一对比度介质获得满意的成像效果,因而大大提高了电阻率层析成像技术的这用性。中给出的数值模拟结果显示了该方法的有效性。     

基于三维正演的音频大地电磁阻抗相位不变量校正技术

复杂地形、地质条件的大地电磁数据解释容易出现假象,采用三维正演技术模拟地形和地表不均匀体的背景响应,对实测数据阻抗相位不变量进行校正,实现更准确的定性分析;对三维异常体模型的合成数据进行一维、二维多参数反演试算,以确定地形剧变区选择反演技术的最佳方案.合成数据的试反演结果显示一维反演水平切片假异常较多,二维反演能压制测向假异常,但不能压制走向的假异常,水平切片多出现测向条带.使用本文提出的阻抗相位不变量校正法扣除地形、地表背景响应,结合一维、二维反演,能使实际资料解释成果更加可靠.     

Geophysical investigation of tumuli by means of surface 3D Electrical Resistivity Tomography

Tumuli are artificially erected small hills that cover monumental tombs or graves. In this work, the surface three-dimensional (3D) Electrical Resistivity Tomography (ERT) method, composed of dense parallel two-dimensional (2D) tomographies, was used to investigate the properties of the tumuli filling material and to resolve buried archaeological structures inside the tumuli.The effectiveness of the method was investigated by numerical modeling and through 3D inversion of synthetic apparent resistivity data. A resistivity model that simulates the inhomogeneous tumulus material and the tombs that are buried inside the tumulus was assumed. The Dipole–Dipole (DD), Pole–Dipole (PD), Pole–Pole (PP), Gradient (GRAD), Midpoint-Potential-Referred (MPR) and Schlumberger Reciprocal (SCR) arrays, which are suitable for multichannel resistivity instruments, were tested. The tumulus topography (pyramid or capsized cup) was incorporated into the inversion procedure through a distorted finite element mesh. The inversion procedure was based on a smoothness constrained Gauss–Newton algorithm in which the Active Constraint Balancing (ACB) method was also applied in order to enhance the least-squares resolving power and stability.Synthetic modeling showed that the different tumulus layers and the horizontal contact of the artificial tumulus material with the natural background soil were reconstructed by all of the tested electrode arrays. Generally, PD and the GRAD arrays comprise the optimum choices to investigate the subsurface properties of a tumulus and locate buried tombs. The MPR model was inferior to the GRAD model, while the DD, PP and SCR models had the poorest resolution. It was also shown that the inversion models are practically independent from the survey direction and the topography shape of the tumulus.The real field data collected employing the PD array along a small tumulus from the archaeological site of Vergina in northern Greece enhanced the synthetic modeling results. The inversion model outlined a number of archaeological structures that exhibit a high possibility to correlate with graves. Overall, this work signifies that the surface 3D ERT method can provide a valuable tool in the non-destructive archaeological exploration of tumuli.     

APPLICATION OF 3D HIGH PRECISION GRAVITY METHOD TO THE EXPLORATION OF DEEP BURIED HILL

Due to the influence of volcanic rock or weathering crust coverage, the quality of deep seismic data is often not reliable and it is difficult to identify small deep buried hill structure beneath the cover. However, the gravity exploration technology can use the remarkable density differences between the object and the overlying strata to identify this special geological reservoir. Although recently several rounds of seismic exploration have been carried out in Raoyang depression, Huabei Oilfield, North China to determine the existence of Hu 8 north deep buried hill, whether the buried hill really exists or not as well as its scale is still in controversial. In this paper, based on the information of seismic data and formation density, deep processing of 3D high precision ground gravity data has been carried out for 3D forward and inversion computation. The dimensional gravity forward calculation results show that the density of the deep anomaly body forms a relatively low gravity anomaly in the earth's surface. By using the potential processing method of vertical second derivative, and sliding filtering, the residual anomaly is separated from regional or background field, which illustrates the existence of a local high gravity anomaly at Hu 8 north area. According to the amplitude of residual gravity anomaly and formation density difference modeling, through a number of 3D forward calculations and 3D inversion of gravity data, the existence of Hu 8 north buried hill and its possible scale are basically determined. The results prove that the 3D high precision gravity method is effective in determining the deep buried hill structure in case that seismic data is not reliable.     

高密度电阻率法在果香峪溶洞勘查中的应用效果分析

地下岩溶的发育影响着地面基础工程的安全使用,所以,我们要对岩溶地区发育特征进行全面的了解,以采取相应的措施保证该地区地面建筑的安全。溶洞的空间赋存状态一般是不规则的三维地质体,它的发育与地下水系及该地区的地质构造有紧密联系,造成溶洞的洞室可能含有高阻或低阻填充物,导致溶洞与围岩之间存在物性差异。高密度电阻率法正是利用物...     

地下衬砌洞室对Rayleigh波的放大作用

本文利用波函数展开法,给出了半空间中圆形衬砌洞室引起的Rayle igh波散射问题的一个级数解,并通过对求解技术的改进,获得了高频解答。论文通过入射波长、洞室直径、衬砌刚度和埋置深度等参数分析,研究了地下洞室对Rayle igh波的放大作用。数值结果表明,地下洞室情况下地表位移幅值可以达到无洞室情况的2.6倍以上;多数情况下,柔性衬砌洞室情况地表位移幅值最大,无衬砌洞室情况次之,刚性衬砌情况最小。     

Mohr圆分析方法在川西-藏东MT剖面资料解释中的应用

用Mohr圆分析法对川西—藏东全测区 76个大地电磁测深点的资料进行了分析 ,结果表明 :测区以 2D区域构造为主要特征 ,横向各向异性不太强 ;区域构造走向大致呈近SN向 ,最大偏离不超过± 30°。文中介绍了 4个测点的分析结果     

Geophysical characterisation of Carlo's V Castle (Crotone, Italy)

The Carlo's V Castle, located in Crotone Town, on the Ionian coast of the Calabria Region (Italy), date back to the 13th century d.C. (Fig. 1). During its long life, the building changed several owners and sustained the damages and the consequent reconstructions due to the innumerable naval battles. Moreover, the castle suffered the action of the earthquakes which always afflict the region.With the principal aim of detecting the location, depth and geometry of the rests of destroyed structures, a systematic Ground Penetrating Radar (GPR) survey was carried out in the area inside the boundary walls. The results are sixty-two one-meter-spaced, filtered and migrated radargrams arranged in four 3D data-sets. From each data-set, the most significant time-slice was extracted.To reduce the ambiguity in the GPR data interpretation, additional geophysical techniques, such as Magnetic (M), and Electrical Resistivity Tomography (ERT), were carried out with a partial superimposition with the GPR data. A comparison and a joint interpretation amongst different geophysical data pointed out some very remarkable features associated to buried remains and possible buried cannonballs.With the secondary aim to check the presence of an old military walkway linking two bastions a GPR profile was carried out on the sea side boundary wall. The GPR results are in agreement with an ERT survey carried out on the same profile and consistent with the presence of an underground passage.     

采空区地震与电法探测数据的联合反演研究及应用

综合地球物理技术在采空区的探测中发挥了重要作用.目前通常采用单方法反演、仅对不同方法反演结果进行对比解释的综合勘探方式,单方法反演的多解性严重降低了其探测精度.如何提高采空区的探测精度,对采空区进行有效探测一直被认为是地球物理技术面临的首要难题.为了提高地震与电法技术的探测精度,基于交叉梯度联合反演理论,设计了地震初至折射走时数据和高密度电法数据的联合反演算法流程,对采空区理论模型和野外实际数据进行了联合反演处理.结果发现通过两者的联合反演,不仅可以提高采空区电阻率反演模型的成像效果,而且能够获得地震单方法反演难以成像的采空区低速异常体,从而提高了地震与电法技术对采空区的探测精度.表明地震与电法探测数据联合反演是一种提高采空区探测精度的有效方法.     

Application of various methods for 2D inverse modeling of residual gravity anomalies

This paper presents a neural network approach to determine 2D inverse modeling of a buried structure from gravity anomaly profile. The results of the applied neural network method are compared with the results of two other methods, least-squares minimization and the simple method. Sphere, horizontal cylinder and vertical cylinder and their gravity effects are considered as the synthetic models and the synthetic data, respectively. The synthetic data are also corrupted with noise to evaluate the capability of the methods. Then the Dehloran bitumen map in Iran is chosen as a real data application. Anomaly value of the cross-section, which is taken from the gravity anomaly map of Dehloran bitumen, is very close to those obtained from these methods.