A grid based clustering and routing algorithm for solving hot spot problem in wireless sensor networks

Energy conservation of the sensor nodes is the most important issue that has been studied extensively in the design of wireless sensor networks (WSNs). In many applications, the nodes closer to the sink are overburdened with huge traffic load as the data from the entire region are forwarded through them to reach the sink. As a result, their energy gets exhausted quickly and the network is partitioned. This is commonly known as hot spot problem. Moreover, sensor nodes are prone to failure due to several factors such as environmental hazards, battery exhaustion, hardware damage and so on. However, failure of cluster heads (CHs) in a two tire WSN is more perilous. Therefore, apart from energy efficiency, any clustering or routing algorithm has to cope with fault tolerance of CHs. In this paper, we address the hot spot problem and propose grid based clustering and routing algorithms, combinedly called GFTCRA (grid based fault tolerant clustering and routing algorithms) which takes care the failure of the CHs. The algorithms follow distributed approach. We also present a distributed run time management for all member sensor nodes of any cluster in case of failure of their CHs. The routing algorithm is also shown to tolerate the sudden failure of the CHs. The algorithms are tested through simulation with various scenarios of WSN and the simulation results show that the proposed method performs better than two other grid based algorithms in terms of network lifetime, energy consumption and number of dead sensor nodes.     

A cluster‐based fault‐tolerant routing protocol for wireless sensor networks

Energy conservation and fault tolerance are two critical issues in the deployment of wireless sensor networks (WSNs). Many cluster‐based fault‐tolerant routing protocols have been proposed for energy conservation and network lifetime maximization in WSNs. However, these protocols suffer from high frequency of re‐clustering as well as extra energy consumption to tolerate failures and consider only some very normal parameters to form clusters without any verification of the energy sufficiency for data routing. Therefore, this paper proposes a cluster‐based fault‐tolerant routing protocol referred as CFTR. This protocol allows higher energy nodes to become Cluster Heads (CHs) and operate multiple rounds to diminish the frequency of re‐clustering. Additionally, for the sake to get better energy efficiency and balancing, we introduce a cost function that considers during cluster formation energy cost from sensor node to CH, energy cost from CH to sink, and another significant parameter, namely, number of cluster members in previous round. Further, the proposed CFTR takes care of nodes, which have no CH in their communication range. Also, it introduces a routing algorithm in which the decision of next hop CH selection is based on a cost function conceived to select routes with sufficient energy for data transfer and distribute uniformly the overall data‐relaying load among the CHs. As well, a low‐overhead algorithm to tolerate the sudden failure of CHs is proposed. We perform extensive simulations on CFTR and compare their results with those of two recent existing protocols to demonstrate its superiority in terms of different metrics.     

Trusted Neighbors Based Secured Routing Scheme in Wireless Sensor Networks Using Agents

In Wireless Sensor Network (WSN) applications, nodes are deployed in public domains that are prone to be attacked by various types of attacks wherein the data confidentiality, integrity and authentication are compromised. In this paper, we propose Agent based SEcured Routing using Trusted neighbors (ASERT) in WSN. ASERT selects trustworthy neighbors and establishes secured routes using software agents. ASERT operates in following phases. (1) Defining Safeguard Agency (SA) and Routing Agency (RA), both consisting of static and mobile agents and a knowledge base. (2) Identification of trustworthy neighbor nodes by SA with trust model that consists of probability and Message Authentication Codes (MAC) model. (3) Probability model estimates the trustworthy channel and trustworthy nodes whereas MAC model ensures them. (4) MAC’s are dynamically computed by agents by generating the keys with the help of Random Oracle Extractor (ROE). (5) RA establishes secured routes from source to the sink node using agents. (6) Agents effectively identify possible security threats on wireless channel and node. (7) An improvement in packet delivery ratio, packet delivery latency, route maintenance overhead, memory overhead and energy consumption is achieved in ASERT as compared to two protocols, namely, Bio-inspired Trust and Reputation model in WSN (BTRM-WSN) using ant colony based approach and Ambient Trust Sensor Routing that uses trust combined with location information for routing.     

Tree‐based channel assignment schemes for multi‐channel wireless sensor networks

Many sensor node platforms used for establishing wireless sensor networks (WSNs) can support multiple radio channels for wireless communication. Therefore, rather than using a single radio channel for whole network, multiple channels can be utilized in a sensor network simultaneously to decrease overall network interference, which may help increase the aggregate network throughput and decrease packet collisions and delays. This method, however, requires appropriate schemes to be used for assigning channels to nodes for multi‐channel communication in the network. Because data generated by sensor nodes are usually delivered to the sink node using routing trees, a tree‐based channel assignment scheme is a natural approach for assigning channels in a WSN. We present two fast tree‐based channel assignment schemes (called bottom up channel assignment and neighbor count‐based channel assignment) for multi‐channel WSNs. We also propose a new interference metric that is used by our algorithms in making decisions. We validated and evaluated our proposed schemes via extensive simulation experiments. Our simulation results show that our algorithms can decrease interference in a network, thereby increasing performance, and that our algorithms are good alternatives for static channel assignment in WSNs. Copyright © 2015 John Wiley & Sons, Ltd.     

基于仿人体血管路径WSN故障容错路由算法研究

为提高无线传感器网络(WSN)故障容错性和传输稳定性,实现网络负载均衡,提出了一种仿人体血管路径的WSN故障容错路由算法.通过研究人体血管路径特性,将其引入到WSN故障容错路由设计中,在对网络节点分区域进行等级标定的基础上实行能耗均衡的静态分簇;运用改进的蚁群算法生成节点路径并计算各路径信息素值,以确定传输路径选择概率并建立仿血管拓扑结构路由.理论与仿真结果表明,此算法具有良好的性能.     

基于位置感知和代理的WSN多径路由方案

针对无线传感器网络(WSN)中多径路由的可靠性和能量效率问题,提出了一种基于代理和位置感知的多径路由发现方案(LABMR).事件节点根据位置信息,动态寻找其到Sink节点之间的特殊中间节点,来构建多径路由.利用移动代理来收集多径路由的局部拓扑结构信息,Sink节点根据代理收集的路由参数来计算路径权值,以此选择最优不相交路径.同时,对于信息的重要性差异,Sink节点选择单条或多条路径来传输数据,在保证传输可靠性的同时减少能耗.与现有的基于代理的多径路由(ABMR)方法相比,LABMP在数据包投递率、能量消耗、额外开销和延迟方面具有更好的性能.     

An optimized forwarding protocol for lifetime extension of wireless sensor networks

Optimized routing (from source to sink) in wireless sensor networks (WSN) constitutes one of the key design issues in prolonging the lifetime of battery‐limited sensor nodes. In this paper, we explore this optimization problem by considering different cost functions such as distance, remaining battery power, and link usage in selecting the next hop node among multiple candidates. Optimized selection is carried out through fuzzy inference system (FIS). Two differing algorithms are presented, namely optimized forwarding by fuzzy inference systems (OFFIS), and two‐layer OFFIS (2L‐OFFIS), that have been developed for flat and hierarchical networks, respectively. The proposed algorithms are compared with popular routing protocols that are considered as the closest counterparts such as minimum transmit energy (MTE) and low energy adaptive clustering hierarchy (LEACH). Simulation results demonstrate the superiority of the proposed algorithms in extending the WSN lifetime. Copyright © 2008 John Wiley & Sons, Ltd.     

Fish bone structure based data aggregation and routing in wireless sensor network: multi-agent based approach

Wireless sensor networks (WSNs) are constrained by limited node (device) energy, low network bandwidth, high communication overhead and latency. Data aggregation alleviates the constraints of WSN. In this paper, we propose a multi-agent based homogeneous temporal data aggregation and routing scheme based on fish bone structure of WSN nodes by employing a set of static and mobile agents. The primary components of fishbone structure are backbone and ribs connected to both sides of a backbone. A backbone connects a sink node and one of the sensor nodes on the boundary of WSN through intermediate sensor nodes. Our aggregation scheme operates in the following steps. (1) Backbone creation and identifying master centers (or nodes) on it by using a mobile agent based on parameters such as Euclidean distance, residual energy, backbone angle and connectivity. (2) Selection of local centers (or nodes) along the rib of a backbone connecting a master center by using a mobile agent. (3) Local aggregation process at local centers by considering nodes along and besides the rib, and delivering to a connected master center. (4) Master aggregation process along the backbone from boundary sensor node to the sink node by using a mobile agent generated by a boundary sensor node. The mobile agent aggregates data at visited master centers and delivers to the sink node. (5) Maintenance of fish bone structure of WSN nodes. The performance of the scheme is simulated in various WSN scenarios to evaluate the effectiveness of the approach by analyzing the performance parameters such as master center selection time, local center selection time, aggregation time, aggregation ratio, number of local and master centers involved in the aggregation process, number of isolated nodes, network lifetime and aggregation energy. We observed that our scheme outperforms zonal based aggregation scheme.     

Froms: A failure tolerant and mobility enabled multicast routing paradigm with reinforcement learning for WSNs

A growing class of wireless sensor network (WSN) applications require the use of sensed data inside the network at multiple, possibly mobile base stations. Standard WSN routing techniques that move data from multiple sources to a single, fixed base station are not applicable, motivating new solutions that efficiently achieve multicast and handle mobility. This paper explores in depth the requirements of this set of application scenarios and proposes Froms, a machine learning-based multicast routing paradigm. Its primary benefits are flexibility to optimize routing over a variety of properties such as route length, battery levels, ease of recovery after node failures, and native support for sink mobility. We provide theoretical, simulation and experimentation results supporting these claims, showing the benefits of Froms in terms of low routing overhead, extended network lifetime, and other key metrics for the WSN environment.     

基于内容的无线传感器网络路由协议

针对无线传感器网络环境下低功耗路由问题,根据无线传感器网络是一种以数据为中心的网络的特点,提出了一种基于内容的低功耗路由协议CBP。其基本思想是:Sink节点根据上层应用构造谓词,并对谓词进行广播,网络中所有传感节点以Sink节点的谓词为依据建立路由表,实现数据路由。与现有无线传感器网络路由协议相比较,此路由协议具有低功耗,占用节点资源少,网络容错能力强等特点。仿真结果表明,在节点数量大于100的大规模网络中,基于内容的无线传感器网络路由协议功耗比定向扩散协议功耗降低19%。     

A frequency‐aware data‐centric mechanism for wireless sensor networks

Wireless sensor networks (WSNs) are characterized by their low bandwidth, limited energy, and largely distributed deployment. To reduce the flooding overhead raised by transmitting query and data information, several data‐centric storage (DCS) mechanisms are proposed. However, the locations of these data‐centric nodes significantly impact the power consumption and efficiency for information queries and storage capabilities, especially in a multi‐sink environment. This paper proposes a novel dissemination approach, which is namely the dynamic data‐centric routing and storage mechanism (DDCRS), to dynamically determine locations of data‐centric nodes according to sink nodes' location and data collecting rate and automatically construct shared paths from data‐centric nodes to multiple sinks. To save the power consumption, the data‐centric node is changed when new sink nodes participate when the WSNs or some queries change their frequencies. The simulation results reveal that the proposed protocol outperforms existing protocols in terms of power conservation and power balancing. Copyright © 2009 John Wiley & Sons, Ltd.     

基于传输距离和Sink移动的扩延网络寿命算法

在无线传感网络WSN(Wireless Sensor Network)中,传感节点通常以多跳方式向信宿Sink传输感测数据.由于邻近信宿Sink的传感节点需要承担数据转发的任务,比其他节点消耗更多的能量,缩短了网络寿命.为此,提出一种扩延网络寿命的新算法,记为NLTA(Network LifeTime Augmentation).NLTA算法采用了节点传输距离自适应调整和信宿Sink移动两个策略.节点依据能量情况,调整传输距离,减少能量消耗,然后根据路径容量值,调整Sink的位置,平衡网内的节点能量消耗,避免信宿Sink的周围节点能量过度消耗.仿真结果表明,提出的NLTA方案能够有效地提高网络寿命.     

A novel residual energy‐based distributed clustering and routing approach for performance study of wireless sensor network

Non‐uniform energy consumption during operation of a cluster‐based routing protocol for large‐scale wireless sensor networks (WSN) is major area of concern. Unbalanced energy consumption in the wireless network results in early node death and reduces the network lifetime. This is because nodes near the sink are overloaded in terms of data traffic compared with the far away nodes resulting in node deaths. In this work, a novel residual energy–based distributed clustering and routing (REDCR) protocol has been proposed, which allows multi‐hop communication based on cuckoo‐search (CS) algorithm and low‐energy adaptive‐clustering–hierarchy (LEACH) protocol. LEACH protocol allows choice of possible cluster heads by rotation at every round of data transmission by a newly developed objective function based on residual energy of the nodes. The information about the location and energy of the nodes is forwarded to the sink node where CS algorithm is implemented to choose optimal number of cluster heads and their positions in the network. This approach helps in uniform distribution of the cluster heads throughout the network and enhances the network stability. Several case studies have been performed by varying the position of the base stations and by changing the number of nodes in the area of application. The proposed REDCR protocol shows significant improvement by an average of 15% for network throughput, 25% for network scalability, 30% for network stability, 33% for residual energy conservation, and 60% for network lifetime proving this approach to be more acceptable one in near future.     

Assimilation of fuzzy clustering approach and EHO‐Greedy algorithm for efficient routing in WSN

The problems related to energy consumption and improvement of the network lifetime of WSN (wireless sensor network) have been considered. The base station (BS) location is the main concern in WSN. BSs are fixed, yet, they have the ability to move in some situations to collect the information from sensor nodes (SNs). Recently, introducing mobile sinks to WSNs has been proved to be an efficient way to extend the lifespan of the network. This paper proposes the assimilation of the fuzzy clustering approach and the Elephant Herding Optimization (EHO)‐Greedy algorithm for efficient routing in WSN. This work considers the separate sink nodes of a fixed sink and movable sink to decrease the utilization of energy. A fixed node is deployed randomly across the network, and the movable sink node moves to different locations across the network for collecting the data. Initially, the number of nodes is formed into the multiple clusters using the enhanced expectation maximization algorithm. After that, the cluster head (CH) selection done through a fuzzy approach by taking the account of three factors of residual energy, node centrality, and neighborhood overlap. A suitable collection of CH can extremely reduce the utilization of energy and also enhancing the lifespan. Finally, the routing protocol of the hybrid EHO‐Greedy algorithm is used for efficient data transmission. Simulation results display that the proposed technique is better to other existing approaches in regard to energy utilization and the system lifetime.     

A distributed,multi‐hop,adaptive, tree‐based energy‐balanced routing approach

To accomplish the primary objective of data sensing and collection of wireless sensor networks (WSN), the design of an energy efficient routing algorithm is very important. However, the energy constrained sensing nodes along with the intrinsic properties of the (WSN) environment makes the routing a challenging task. To overcome this routing dilemma, an improved distributed, multi‐hop, adaptive, tree‐based energy‐balanced (DMATEB) routing scheme is proposed in this paper. In this scheme, a relay node is selected in view of minimum distance and high energy from a current sensing node. Further, the parent node is chosen among the selected relay nodes on the basis of high residual energy and less power consumption with due consideration of its associated child nodes. As each sensing node itself selects its parent among the available alternatives, the proposed scheme offers a distributive and adaptive approach. Moreover, the proposed system does not overload any selected parent of a particular branch as it starts acting as a child whenever its energy lowers among the other available relay nodes. This leads to uniform energy utilization of nodes that offers a better energy balance mechanism and improves the network lifespan by 20% to 30% as compared with its predecessors.     

Clustering Based Two Dimensional Motion of Sink Node in Wireless Sensor Networks

The wireless sensor network (WSN) is always known for its limited-energy issues and finding a good solution for energy minimization in WSNs is still a concern for researchers. Implementing mobility to the sink node is used widely for energy conservation or minimization in WSNs which reduces the distance between sink and communicating nodes. In this paper, with the intention to conserve energy from the sensor nodes, we designed a clustering based routing protocol implementing a mobile sink called ‘two dimensional motion of sink node (TDMS)’. In TDMS, each normal sensor node collects data and send it to their respective leader node called cluster head (CH). The sink moves in the two dimensional direction to collect final data from all CH nodes, particularly it moves in the direction to that CH which has the minimum remaining energy. The proposed protocol is validated through rigorous simulation using MATLAB and comparisons have been made with WSN’s existing static sink and mobile sink routing protocols over two different geographical square dimensions of the network. Here, we found that TDMS model gives the optimal result on energy dissipation per round and increased network lifetime.

     

A location‐aware peer‐to‐peer overlay network

This work describes a novel location‐aware, self‐organizing, fault‐tolerant peer‐to‐peer (P2P) overlay network, referred to as Laptop. Network locality‐aware considerations are a very important metric for designing a P2P overlay network. Several network proximity schemes have been proposed to enhance the routing efficiency of existing DHT‐based overlay networks. However, these schemes have some drawbacks such as high overlay network and routing table maintenance overhead, or not being completely self‐organizing. As a result, they may result in poor scalability as the number of nodes in the system grows. Laptop constructs a location‐aware overlay network without pre‐determined landmarks and adopts a routing cache scheme to avoid maintaining the routing table periodically. In addition, Laptop significantly reduces the overlay maintenance overhead by making each node maintain only the connectivity between parent and itself. Mathematical analysis and simulations are conducted to evaluate the efficiency, scalability, and robustness of Laptop. Our mathematical analysis shows that the routing path length is bounded by log_d N, and the joining and leaving overhead is bounded by d log_d N, where N is the number of nodes in the system, and d is the maximum degree of each node on the overlay tree. Our simulation results show that the average latency stretch is 1.6 and the average routing path length is only about three in 10 000 Laptop nodes, and the maximum degree of a node is bounded by 32. Copyright © 2006 John Wiley & Sons, Ltd.     

Path selection algorithms for fault tolerance in wireless mesh networks

Recently Wireless Mesh Networks (WMNs) have emerged as a key technology for providing high-bandwidth networking among peer nodes over a specific coverage area. Features such as low cost, ease of deployment, self-configuration and self-healing make them one of the most promising global telecommunication systems. Despite their advantages, however, several research challenges remain in all protocol layers. In this paper, we address the main challenging issues related to the routing aspects in a WMN. Routing in such networks is performed through multi-hop paths where intermediate nodes cooperatively make forwarding decisions based on their knowledge regarding the network topology. However, in an unideal dynamic environment due to frequent or rare node failures/misbehavior, traditional ad-hoc routing protocols suffer from high routing overhead or energy consumption. Motivated by this, we propose several path selection algorithms which adapt to such topology dynamics. The main objective of these routing schemes is to provide fault tolerance without sacrificing the energy and computational complexity efficiency. Numerical investigations, based on extensive simulations, validate the effectiveness of our proposals even when faulty nodes subsist in the environment.     

无线传感器网络动态分簇路由BWAS的算法研究

为加快无线传感器网络(WSN)路径搜索速度,减少了路径寻优能量消耗,提出了基于最优-最差蚂蚁系统(BWAS)算法的无线传感器网络动态分簇路由算法。该算法是基于WSN动态分簇能量管理模式,在簇头节点间运用BWAS算法搜寻从簇头节点到汇聚节点的多跳最优路径,以多跳接力方式将数据发送至汇聚节点。BWAS算法在路径搜寻过程中评价出最优-最差蚂蚁,引入奖惩机制,加强搜寻过程的指导性。结合动态分簇能量管理,避免网络连续过度使用某个节点,均衡了网络节点能量消耗。通过与基于蚁群算法(ACS)路由算法仿真比较,本算法减缓了网络节点的能量消耗,延长了网络寿命,在相同时间里具有较少的死亡节点,具有较强的鲁棒性。