o-Phenylenediamine adsorbed onto silica gel modified with niobium oxide for electrocatalytic NADH oxidation

A study of a modified carbon paste electrode employing o-phenylenediamine (PDA) adsorbed onto silica gel modified with niobium oxide (SN) for electrocatalytic oxidation of nicotinamide adenine dinucleotide (NADH) is described. The species adsorbed on SN was used to prepare a modified carbon paste electrode to investigate its electrochemical properties. The formal potential (E^0′) of the adsorbed PDA was −140 mV vs. SCE (saturated calomel electrode). The electrochemical behavior of the adsorbed PDA, compared to that of PDA dissolved in aqueous solution, was completely different. In solution, pH between 3.0 and 8.0, E^0′ remained almost constant and the response was very stable. A linear response range for NADH between 4.0×10⁻⁵ and 8.0×10⁻⁴ mol l⁻¹, at pH 7.0, was observed for the electrode, with an applied potential of −50 mV vs. SCE. The formation of an intermediate charge transfer complex is proposed for the charge transfer reaction between NADH and adsorbed PDA. The heterogeneous electron transfer rate, k_obs, was 5480 mol⁻¹ l s⁻¹ and the apparent Michaelis-Menten constant, 1.04×10⁻⁴ mol l⁻¹ at pH 7.0, evaluated with rotating disk electrode (RDE) experiments with an electrode with a coverage of PDA of 5.7×10⁻⁹ mol cm⁻². The slight increase in the reaction rate with the solution pH was assigned to the thermodynamic driving force.     

Poly-phenothiazine derivative-modified glassy carbon electrode for NADH electrocatalytic oxidation

Electropolymerization of a new phenothiazine derivative (bis-phenothiazin-3-yl methane; BPhM) on glassy carbon (GC) electrode generates a conducting film of poly-BPhM, in stable contact with the electrode surface. The heterogeneous electron-transfer process corresponding to the modified electrode is characterized by a high rate constant (50.4 s⁻¹, pH 7). The GC/poly-BPhM electrode shows excellent electrocatalytic activity toward NADH oxidation. The rate constant for catalytic NADH oxidation, estimated from rotating disk electrode (RDE) measurements and extrapolated to zero concentration of NADH, was found to be 9.4 × 10⁴ M⁻¹ s⁻¹ (pH 7). The amperometric detection of NADH, at +200 mV vs. SCE, is described by the following electroanalytical parameters: a sensitivity of 1.82 mA M⁻¹, a detection limit of 2 μM and a linear domain up to 0.1 mM NADH.     

Electrosynthesis and efficient electrocatalytic performance of poly(neutral red)/ordered mesoporous carbon composite

A novel composite film which contains ordered mesoporous carbon (OMC) along with the incorporation of poly(neutral red) (PNR) has been synthesized on glassy carbon electrode by potentiostatic method. This composite film was characterized by scanning electron microscope (SEM) and cyclic voltammetry (CV). Two pairs of the redox peaks appear at formal potential E^0′ = +0.045 V (peak I) and E^0′ = −0.49 V (peak II) at the PNR/OMC/GC electrode. And it is found that only the redox waves (peak I) exhibits good electrocatalytic activity towards nicotinamide adenine dinucleotide (NADH) and 2-mercaptoethanol (2-ME). Under a lower operation potential of +0.07 V, amperometry method was used to determine the concentration of NADH and 2-ME, respectively. In pH 7.0, sensors for two molecules under their corresponding optimized conditions were developed with acceptable sensitivity and low detection limits in large determination ranges. In addition, these sensors have good reproducibility and stability.     

Electrocatalytic activity of oxidation products of guanine and 5′-GMP towards the oxidation of NADH

We have studied the potential electrocatalytic activity towards the oxidation of NADH of several oxidation products of guanine and its derivative guanosine-5′-monophosphate (5′-GMP) on pyrolytic graphite electrodes (PGE). The distribution of products generated strongly depends on the experimental conditions. Our investigations focused on the oxidation products that are adsorbed on the electrode surface, are redox active and, exhibited electrocatalytic activity toward the oxidation of NADH. These compounds were electrochemically and kinetically characterized in terms of dependence of the formal potential on pH and electron transfer rate constant (k_s). The voltammetric and catalytic behavior of both guanine and 5′-GMP oxidation products was compared with that of other guanine derivatives we have previously studied. Some mechanistic aspects concerning the generation of the catalysts are also discussed.     

An electrochemical DNA biosensor developed on novel multinuclear nickel(II) salicylaldimine metallodendrimer platform

An electrochemical DNA biosensor (EDB) was prepared using an oligonucleotide of 21 bases with sequence NH₂-5′-GAGGAGTTGGGGGAGCACATT-3′ (probe DNA) immobilized on a novel multinuclear nickel(II) salicylaldimine metallodendrimer on glassy carbon electrode (GCE). The metallodendrimer was synthesized from amino functionalized polypropylene imine dendrimer, DAB-(NH₂)₈. The EDB was prepared by depositing probe DNA on a dendrimer-modified GCE surface and left to immobilize for 1 h. Voltammetric and electrochemical impedance spectroscopic (EIS) studies were carried out to characterize the novel metallodendrimer, the EDB and its hybridization response in PBS using [Fe(CN)₆]^3−/4− as a redox probe at pH 7.2. The metallodendrimer was electroactive in PBS with two reversible redox couples at E°′ = +200 mV and E°′ = +434 mV; catalytic by reducing the E_pa of [Fe(CN)₆]^3−/4− by 22 mV; conducting and has diffusion coefficient of 8.597 × 10⁻⁸ cm² s⁻¹. From the EIS circuit fitting results, the EDB responded to 5 nM target DNA by exhibiting a decrease in charge transfer resistance (R_ct) in PBS and increase in R_ct in [Fe(CN)₆]^3−/4− redox probe; while in voltammetry, increase in peak anodic current was observed in PBS after hybridization, thus giving the EDB a dual probe advantage.     

Study and determination of the herbicide cyclosulfamuron by square wave stripping voltammetry

The voltammeric behavior of the herbicide cyclosulfamuron has been studied by square wave stripping voltammetry (SWSV). Cyclosulfamuron was reduced on a static mercury drop electrode (SMDE) and gave a well-defined peak in the pH range of 3.0-7.0. The peak potential (E_p) shifts to a more negative potential with increasing pH. The ratio ΔE_p/ΔpH over the pH range studied was 59.5 mV/pH. A systematic study of the various experimental parameters that affect the stripping response was studied by SWV. The square wave parameters used were a frequency of 150 Hz, an amplitude of −60 mV and a staircase step of 6.0 mV. The quantifications were performed by the standard addition method, from the SW voltammetric peak obtained at −1348 mV. Calibration curves were linear in the range of 10-350 μg L⁻¹ with a detection limit of 3.5 μg L⁻¹ under the conditions used (pH 6.0 buffer solution, E_acc = −400 mV vs. Ag/AgCl, t_acc = 75 s). The validity of the developed methodology was assessed by recovery experiments at the 25-100 μg L⁻¹ level. The mean results for 3 determinations were 49.7 ± 3.3 μg L⁻¹, which is very close to the amount of cyclosulfamuron added to soil (50 μg L⁻¹), with a recovery of 99.4%. The sufficiently good recoveries and low relative standard deviation (RSD) data reflects the high accuracy and precision of the proposed SW voltammetric method. The possible influences of various inorganic species and other pesticides were also investigated.     

Photoelectrocatalytic determination of NADH in a flow injection system with electropolymerized methylene blue

It was firstly described that a glassy carbon electrode electropolymerized with methylene blue shows an efficient photoelectrocatalytic activity towards NADH oxidation in a phosphate buffer solution (pH 7.0). In order to perform the photoelectrocatalytic determination of NADH in a flow injection analysis (FIA) system, a home-made flow electrochemical cell with a suitable transparent window for the irradiation of the electrode surface was constructed. The currents obtained from the photoamperometric measurements in the FIA system at optimum conditions (flow rate of carrier solution, 1.3 mL min⁻¹; transmission tubing length, 10 cm; injection volume, 100 μL; and constant applied potential, +150 mV vs. Ag/AgCl) were linearly dependent on the NADH concentration and linear calibration curves were obtained in the range of 1.0 × 10⁻⁷–2.0 × 10⁻⁴ M. The detection limit was found to be 4.0 × 10⁻⁸ M for photoamperometric determination of NADH.     

Theory for double potential step chronoamperometry for any potential values at spherical electrodes: Simultaneous determination of the diffusion coefficients of the electroactive species

We present a general and explicit analytical solution for double potential step chronoamperometry with any applied potential values (E₁, E₂) corresponding to a reversible charge transfer process at spherical electrode. This solution is essential to analyze double pulse electrochemical techniques such as RPV and DPV. We consider unequal diffusion coefficients, initial presence of both electroactive species and that the reaction product can dissolve in the electrolytic solution or in the electrode.From the analytical equation obtained it is possible to deduce interesting simplified expressions for some particular cases: both species soluble in the electrolytic solution with equal diffusion coefficients, planar electrodes, ultramicroelectrodes when both species are soluble in the electrolytic solution, and double potential step chronoamperometry with limit current potentials (E₁−E^°′→−∞, E₂−E^°′→+∞). In this last case, when reaction product is not initially present it is pointed that planar electrodes and ultramicroelectrodes cannot be used for determining both diffusion coefficients. This interesting practical consequence can be demonstrated by means of the analytical expression deduced here, which represents a notable advantage in front of numerical results.     

Preparation of polypyrrole/ferrocyanide films modified carbon paste electrode and its application on the electrocatalytic determination of ascorbic acid

Functionalized polypyrrole film were prepared by incorporation of (Fe(CN)₆)⁴⁻ as doping anion, during the electropolymerization of pyrrole onto a carbon paste electrode (CPE) in aqueous solution by using potentiostatic method. The electrochemical behavior of the (Fe(CN)₆)³⁻/(Fe(CN)₆)⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry and double step potential chronoamperometry methods. In this study, an obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole/ferrocyanide films modified carbon paste electrode (Ppy/FCNMCPEs) was demonstrated by oxidation of ascorbic acid. It has been found that under optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such electrode occurs at a potential about 540 mV less positive than unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α and catalytic reaction rate constant, k_h′, were also determined by using various electrochemical approaches.The catalytic oxidation peak current showed a linear dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 4.5×10⁻⁴ to 9.62×10⁻³ M of ascorbic acid with a correlation coefficient of 0.9999. The detection limit (2σ) was determined as 5.82×10⁻⁵ M.     

Electrooxidation of sulfide by cobalt pentacyanonitrosylferrate film on glassy carbon electrode by cyclic voltammetry

A glassy carbon (GC) electrode was modified with cobalt pentacyanonitrosylferrate (CoPCNF) film. Cyclic voltammetry (CV) of the CoPCNF onto the GC (CoPCNF/GC) shows a redox couple (Fe^III/Fe^II) with a standard potential (E^0′) of 580 mV. The current ratio I_pa/I_pc remains almost 1, and a peak separation (ΔE_p) of 106 mV is observed in 0.5 M KNO₃ as the supporting electrolyte. Anodic peak currents were found to be linearly proportional to the scan rate between 10 and 200 mV s⁻¹, indicating an adsorption-controlled process. The redox couple of the CoPCNF film presents an electrocatalytic response to sulfide in aqueous solution. The analytical curve was linear in the concentration range of 7.5 × 10⁻⁵ to 7.7 × 10⁻⁴ M with a detection limit of 4.6 × 10⁻⁵ M for sulfide ions in 0.5 M KNO₃ solution.     

Immobilization, direct electrochemistry and electrocatalysis of hemoglobin on colloidal silver nanoparticles-chitosan film

This paper reports on the fabrication and characterization of hemoglobin (Hb)-colloidal silver nanoparticles (CSNs)-chitosan film on the glassy carbon electrode and its application on electrochemical biosensing. CSNs could greatly enhance the electron transfer reactivity of Hb as a bridge. In the phosphate buffer solution with pH value of 7.0, Hb showed a pair of well-defined redox peaks with the formal potential (E^0′) of −0.325 V (vs. SCE). The immobilized Hb in the film maintained its biological activity, showing a surface-controlled process with the heterogeneous electron transfer rate constant (k_s) of 1.83 s⁻¹ and displayed the same features of a peroxidase in the electrocatalytic reduction of oxygen and hydrogen peroxide (H₂O₂). The linear range for the determination of H₂O₂ was from 0.75 μM to 0.216 mM with a detection limit of 0.5 μM (S/N = 3). Such a simple assemble method could offer a promising platform for further study on the direct electrochemistry of other redox proteins and the development of the third-generation electrochemical biosensors.     

Co (II) porphyrin adsorbed on SiO2/SnO2/phosphate prepared by the sol-gel method: Application in electroreduction of dissolved dioxygen

This paper describes the immobilization procedure of 5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21-H,23-H-porphyrin ion on SiO₂/SnO₂/phosphate, obtained by the sol-gel processing method. P 2p X-ray photoelectron and the ³¹P MAS NMR spectra revealed that dihydrogen phosphate is the species present on the surface. The porphyrin was adsorbed on the surface of the modified material and furthermore metallized in situ with Co (II) ion. The porphyrin metallation process was followed with UV-vis spectroscopy by inspecting the Q bands of the free and metallated porphyrin. The free porphyrin presented four Q bands associated to a D_2h local symmetry and the metallated one, two bands related to a D_4h local symmetry. The amount of electroactive species adsorbed on the material was estimated by integrating the area under the peak of Co (II) → Co (I) reduction by using the pulse differential voltammetric technique. The amount of the metallated porphyrin was 2.3 × 10⁻¹⁰ mol cm⁻². A carbon paste electrode of the modified material containing metallated porphyrin was used to study the electrocatalytic reduction of dissolved dioxygen by means of cyclic voltammetry, chronoamperometry and linear sweeping voltammetry. The modified electrode was very stable and exhibited the electrocatalytic reduction of dissolved dioxygen at −180 mV versus SCE by a two-electron mechanism, producing hydrogen peroxide at pH 5.4. The electroactive species was strongly retained on the material surface, presumably inside the pores of the material, since in a test of various oxidation-reduction cycles no significant decrease of the current densities was detected, indicating that it was not leached off during the experiment.     

Electrochemical and spectroscopic properties of dendritic cobalto-salicylaldiimine DNA biosensor

A metallodendrimer-based electrochemical DNA biosensor was constructed by a layer-by-layer assembly of cobalt(II) salicylaldiimine metallodendrimer (SDD-Co(II)) and a 21 bases oligonucleotide NH₂-5′-GAGGAGTTGGGGGAGCACATT-3′ (pDNA) on a gold electrode. The complementary oligonucleotide was 5′-AATGTGCTCCCCCAACTCCTC-3′ (tDNA). UV-visible spectra of SDD-Co(II) in 1:1 (v/v) acetone-ethanol solution showed absorption bands at 325 nm and 365-420 nm related to π-π* intra-dendrimer transitions and d-π* metal-dendrimer charge transfer transitions, respectively. Square-wave voltammetry (SWV) characterisation of the Au|SDD-Co(II)|pDNA biosensor system in phosphate buffer saline solution of pH 7.4, indicated a reversible one-electron electrochemical process with a formal potential, E°′, value of +210 mV. Electrochemical impedance spectroscopy (EIS) data confirmed that the hybridisation of the biosensor's pDNA with the tDNA to form double-stranded DNA (dsDNA) resulted in an increase of the impedimetric charge transfer resistance, R_ct, value from 6.52 to 12.85 kΩ. The limit of detection (LOD), calculated as 3σ of the background noise, and sensitivity of the sensor were 1.29 kΩ/nmol L⁻¹ and 0.34 pmol L⁻¹, respectively.     

Electrochemical studies with a Cu-5wt.%Ni alloy in 0.5 M H2SO4

The electrochemical behavior of the annealed Cu-5wt.%Ni alloy in 0.5 M H₂SO₄ was studied by means of open-circuit potential (E_OCP) measurements, cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and quasi-stationary linear potential sweep. The hydrodynamics of the system was also studied. This material is constituted by a single α₁ phase. The anodic behavior of a Cu-Ni alloy in H₂SO₄ consists fundamentally on the electrodissolution of Cu, its main component, and the formation of a sulfur-containing passive layer. The presence of Ni decreases the rate of Cu oxidation, mostly at high positive potentials. The impedance spectra, obtained for the unrotating electrode, can be interpreted in terms of a simple charge-transfer reaction across a surface layer. When the electrode is rotated, the occurrence of an inductive loop evidenced the existence of an adsorbed layer. All the resistance estimated from the proposed equivalent circuits diminished with the electrode rotation rate, emphasizing the influence of ion transport in the overall electrode process. The system presented two anodic Tafel slopes: 40 mV dec⁻¹ for E<255 mV and 67 mV dec⁻¹ for E>275 mV. A Tafel slope of 40 mV dec⁻¹ evidences that copper dissolution can be interpreted in terms of the mechanism proposed by Mattsson and Bockris. The second Tafel suggests that at potentials more positive than 275 mV, copper dissolves according to a mechanism that considers the disproportionation of adsorbed Cu(I) species.     

Direct electron transfer from glucose oxidase immobilized on a nano-porous glassy carbon electrode

A pair of well-defined and reversible redox peaks was observed for the direct electron transfer (DET) reaction of an immobilized glucose oxidase (GOx) on the surface of a nano-porous glassy carbon electrode at the formal potential (E°′) of −0.439 V versus Ag/AgCl/saturated KCl. The electron transfer rate constant (k_s) was calculated to be 5.27 s⁻¹. The dependence of E°′ on pH indicated that the direct electron transfer of the GOx was a two-electron transfer process, coupled with two-proton transfer. The results clearly demonstrate that the nano-porous glassy carbon electrode is a cost-effective and ready-to-use scaffold for the fabrication of a glucose biosensor.     

Electrochemistry and electrocatalysis of hemoglobin on multi-walled carbon nanotubes modified carbon ionic liquid electrode with hydrophilic EMIMBF4 as modifier

The direct electrochemistry of hemoglobin (Hb) on multi-walled carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was achieved in this paper. By using a hydrophilic ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) as the modifier, a new CILE was fabricated and further modified with MWCNTs to get the MWCNTs/CILE. Hb molecules were immobilized on the surface of MWCNTs/CILE with polyvinyl alcohol (PVA) film by a step-by-step method and the modified electrode was denoted as PVA/Hb/MWCNTs/CILE. UV-vis and FT-IR spectra indicated that Hb remained its native structure in the composite film. Cyclic voltammogram of PVA/Hb/MWCNTs/CILE showed a pair of well-defined and quasi-reversible redox peaks with the formal potential (E^0′) of −0.370 V (vs. SCE) in 0.1 mol/L pH 7.0 phosphate buffer solution (PBS), which was the characteristic of the Hb heme Fe^III/Fe^II redox couples. The redox peak currents increased linearly with the scan rate, indicating the direct electron transfer was a surface-controlled process. The electrochemical parameters of Hb in the film were calculated with the results of the electron transfer coefficient (α) and the apparent heterogeneous electron transfer rate constant (k_s) as 0.49 and 1.054 s⁻¹, respectively. The immobilized Hb in the PVA/MWCNTs composite film modified CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and hydrogen peroxide. So the proposed electrode showed the potential application in the third generation reagentless biosensor.     

Enhancement of electrocatalytic properties of carbonized polyaniline nanoparticles upon a hydrothermal treatment in alkaline medium

The electrocatalytic activity of carbonized polyaniline nanostructures (Carb-nanoPANI) towards oxygen reduction reaction (ORR), estimated in 0.1 mol dm⁻³ KOH solution, was significantly improved upon a hydrothermal treatment in 1 mol dm⁻³ KOH solution. Namely, the onset of ORR was shifted by ∼70 mV to more positive potentials, and the number of electrons consumed per O₂ molecule was enhanced in comparison to the original material. The number of electrons involved in ORR depended on loading, and with a loading of 0.5 mg cm⁻², for the potentials lower than −0.5 V vs SCE, the number of electrons approached 4. For this material, high stability of electrochemical behavior and resistance to the poisoning by ethanol was evidenced by potentiodynamic cycling.     

Electrocatalytic properties of new active ternary ferrite film anodes for O2 evolution in alkaline medium

Some ternary ferrites with molecular formula, CoFe_2−xCr_xO₄ (0≤x≤1.0) have been synthesized at 70 °C by a precipitation method and were transformed into the film form at the pretreated Ni support (1.5×1.0 cm²) using an oxide-slurry painting technique. The study showed that Cr-substitution from 0.2 to 1.0 mol increased the electrocatalytic activity of the oxide towards the oxygen evolution reaction (OER), the optimum improvement in apparent electrocatalytic activity being with 0.8 mol Cr. At E=600 mV versus Hg/HgO in 1 M KOH (25 °C), the apparent oxygen evolution current density (j_a) with the catalyst, CoFe_1.2Cr_0.8O₄, was ∼80 times greater than that observed with the base oxide (i.e. CoFe₂O₄). The OER on Cr-substituted oxides showed two Tafel slopes, one (b=42±1 mV per decade) at low overpotential and the other (b=66±6 mV per decade) at higher potential. The reaction order with respect to OH⁻ concentration was ∼1.3±0.1 for each electrocatalyst. The thermodynamic parameters for the OER, namely, standard apparent electrochemical enthalpy of activation (ΔH°_el^#), standard enthalpy of activation (ΔH°^#) and standard entropy of activation (ΔS°^#) have also been determined. It was observed that values of the ΔH°_el^# and ΔH°^# decreased with Cr-substitution in the CoFe₂O₄ lattice; the decrement, however, being the greatest with 0.8 mol Cr. The ΔS°^# values were largely negative varying between ∼−61 and −126 J deg⁻¹ mol⁻¹.     

Electrocatalytic activity of 2,3,5,6-tetrachloro-1,4-benzoquinone/multi-walled carbon nanotubes immobilized on edge plane pyrolytic graphite electrode for NADH oxidation

This work reports the electrocatalytic activity of 2,3,5,6-tetrachloro-1,4-benzoquinone (TCBQ)/multi-walled carbon nanotubes (MWCNT) immobilized on an edge plane pyrolytic graphite electrode for nicotinamide adenine dinucleotide (NADH) oxidation. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS) were used to confirms the presence of chloro after the nanotube modification with 2,3,5,6-tetrachloro-1,4-benzoquinone. The surface charge transfer constant, k_s, and the charge transfer coefficient for the modified electrode, α, were estimated as 98.5 (±0.6) s⁻¹ and 0.5, respectively. With this modified electrode the oxidation potential of the NADH was shifted about 300 mV toward a less positive value, presenting a peak current much higher than those measured on an unmodified edge plane pyrolytic graphite electrode (EPPG). Cyclic voltammetry and rotating disk electrode (RDE) experiments indicated that the NADH oxidation reaction involves 2 electrons and a heterogenous rate constant (k_obs) of 3.1 × 10⁵ mol⁻¹ l s⁻¹. The detection limit, repeatability, long-term stability, time of response and linear response range were also investigated.