Proof Reflection in Coq

We formalize natural deduction for first-order logic in the proof assistant Coq, using de Bruijn indices for variable binding. The main judgment we model is of the form d[:], stating that d is a proof term of formula under hypotheses it can be viewed as a typing relation by the Curry–Howard isomorphism. This relation is proved sound with respect to Coq's native logic and is amenable to the manipulation of formulas and of derivations. As an illustration, we define a reduction relation on proof terms with permutative conversions and prove the property of subject reduction.     

On the minimal number of trajectories determining a multidimensional system

The minimal number(S) of generators of a multidimensional systemS is constructively determined. Such anS is the solution space of a linear system of partial differential or difference equations with constant coefficients. The main theorem generalizes recent results of Heij and Zampieri who calculated the number(S) in the one- (resp. two-) dimensional discrete case. There is also a direct connection with Macaulay's inverse systems in the multidimensional discrete situation, in particular with his principal systems characterized by the relation(S)1. It is surprising that, for dimensions greater than one, very many large systems are principal in this sense.     

Generating Boolean \mu-expressions

In this paper, we consider the class of Boolean -functions, which are the Boolean functions definable by -expressions (Boolean expressions in which no variable occurs more than once). We present an algorithm which transforms a Boolean formulaE into an equivalent -expression-if possible-in time linear in E times , where E is the size ofE andn _m is the number of variables that occur more than once inE. As an application, we obtain a polynomial time algorithm for Mundici's problem of recognizing -functions fromk-formulas [17]. Furthermore, we show that recognizing Boolean -functions is co-NP-complete for functions essentially dependent on all variables and we give a bound close to co-NP for the general case.     

Deep X-ray lithography using mask with integrated electrothermal actuator

We present a deep X-ray mask with integrated bent-beam electrothermal actuator for the fabrication of 3D microstructures with curved surface. The mask absorber is electroplated on the shuttle mass, which is supported by a pair of 20-m-thick single crystal silicon bent-beam electrothermal actuators and oscillated in a rectilinear direction due to the thermal expansion of the bent-beams. The width of each bent-beam is 10 m or 20 m and the length and bending angle are 1 mm and 0.1 rad, respectively, and the shuttle mass size is 1 mm × 1 mm. For 10-m-wide bent-beams, the shuttle mass displacement is around 15 m at 180 mW (3.6 V) dc input power. For 20-m-wide bent-beams, the shuttle mass displacement is around 19 m at 336 mW (4.2 V) dc input power. Sinusoidal cross-sectional PMMA microstructures with a pitch of 40 m and a height of 20 m are fabricated by 0.5 Hz, 20-m-amplitude sinusoidal shuttle mass oscillation.This research, under the contract project code MS-02-338-01, has been supported by the Intelligent Microsystem Center, which carries out one of the 21st centurys Frontier R & D Projects sponsored by the Korea Ministry of Science & Technology. Experiments at PLS were supported in part by MOST and POSCO.     

Three-dimensional micro-structures consisting of high aspect ratio inclined micro-pillars fabricated by simple photolithography

This paper presents a fabrication method of three-dimensional micro-structures consisting of high aspect ratio inclined micro-pillars using simple photolithography. The width and height of micro-pillars were 10 m and 200 m (the aspect ratio was about 20). The SU-8 coated on the Cr patterned Pyrex glass substrate was exposed from the backside with an angle to fabricate inclined micro-pillars. The 3-D micro-structures were fabricated by repeating the backside exposure with different angles. The shape of the micro-structure was defined by the number of exposures and the UV irradiation angles. The complicated micro-structures were fabricated by multi-angle exposures around two axes, as well as around one axis.This work was supported by: the Japanese Ministry of Education, Culture, Sport, Science and Technology Grant-in-Aids for COE Research of Waseda University, Scientific Research Priority Area (B) No. 13124209, Japan Society for the Promotion Science Grant-in-Aids for Creative Scientific Research No. 13BS0024, Nanotechnology Support Project of the Ministry of Education, Culture, Sports, Science and Technology (MEXT) Japan, 21COE Practical Nano-Chemistry from MEXT Japan and Waseda University Grant for Special Research Project Individual Research No. 2002A-865.     

A variotherm mold for micro metal injection molding

In this paper, a variotherm mold was designed and fabricated for the production of 316L stainless steel microstructures by micro metal injection molding (MIM). The variotherm mold incorporated a rapid heating/cooling system, vacuum unit, hot sprue and cavity pressure transducer. The design of the variotherm mold and the process cycle of MIM using the variotherm mold were described. Experiments were conducted to evaluate the molded microstructures produced using variotherm mold and conventional mold. The experiments showed that microstructures of higher aspect ratio such as 60 m × height 191 m and 40 m × height 174 m microstructures could be injection molded with complete filling and demolded successfully using the variotherm mold. Molded microstructures with dimensions of 60 m × height 191 m were successfully debound and sintered without visual defects.     

A Stylometric Analysis of Ya?ar Kemal’s ? nce Memed Tetralogy

We analyze four nce Memed novels of Yaar Kemal using six style markers: most frequent words, syllable counts, word type – or part of speech – information, sentence length in terms of words, word length in text, and word length in vocabulary. For analysis we divide each novel into five thousand word text blocks and count the frequencies of each style marker in these blocks. The style markers showing the best separation are most frequent words and sentence lengths. We use stepwise discriminant analysis to determine the best discriminators of each style marker. We then use these markers in cross validation based discriminant analysis. Further investigation based on multiple analysis of variance (MANOVA) reveals how the attributes of each style marker group distinguish among the volumes.     

Almost surely continuous solutions of a nonlinear stochastic integral equation

A nonlinear stochastic integral equation of the Hammerstein type in the formx(t; ) = h(t, x(t; )) + _s k(t, s; )f(s, x(s; ); )d(s) is studied wheret S, a measure space with certain properties, , the supporting set of a probability measure space (,A, P), and the integral is a Bochner integral. A random solution of the equation is defined to be an almost surely continuousm-dimensional vector-valued stochastic process onS which is bounded with probability one for eacht S and which satisfies the equation almost surely. Several theorems are proved which give conditions such that a unique random solution exists. AMS (MOS) subject classifications (1970): Primary; 60H20, 45G99. Secondary: 60G99.     

On the Quadratic Convergence of the Levenberg-Marquardt Method without Nonsingularity Assumption

Recently, Yamashita and Fukushima [11] established an interesting quadratic convergence result for the Levenberg-Marquardt method without the nonsingularity assumption. This paper extends the result of Yamashita and Fukushima by using _k=||F(x_k)||, where [1,2], instead of _k=||F(x_k)||² as the Levenberg-Marquardt parameter. If ||F(x)|| provides a local error bound for the system of nonlinear equations F(x)=0, it is shown that the sequence {x_k} generated by the new method converges to a solution quadratically, which is stronger than dist(x_k,X^*)0 given by Yamashita and Fukushima. Numerical results show that the method performs well for singular problems.     

Fuzzy measurement in the Mishnah and the Talmud

I discuss the attitude of Jewish law sources from the 2nd–:5th centuries to the imprecision of measurement. I review a problem that the Talmud refers to, somewhat obscurely, as impossible reduction. This problem arises when a legal rule specifies an object by referring to a maximized (or minimized) measurement function, e.g., when a rule applies to the largest part of a divided whole, or to the first incidence that occurs, etc. A problem that is often mentioned is whether there might be hypothetical situations involving more than one maximal (or minimal) value of the relevant measurement and, given such situations, what is the pertinent legal rule. Presumption of simultaneous occurrences or equally measured values are also a source of embarrassment to modern legal systems, in situations exemplified in the paper, where law determines a preference based on measured values. I contend that the Talmudic sources discussing the problem of impossible reduction were guided by primitive insights compatible with fuzzy logic presentation of the inevitable uncertainty involved in measurement. I maintain that fuzzy models of data are compatible with a positivistic epistemology, which refuses to assume any precision in the extra-conscious world that may not be captured by observation and measurement. I therefore propose this view as the preferred interpretation of the Talmudic notion of impossible reduction. Attributing a fuzzy world view to the Talmudic authorities is meant not only to increase our understanding of the Talmud but, in so doing, also to demonstrate that fuzzy notions are entrenched in our practical reasoning. If Talmudic sages did indeed conceive the results of measurements in terms of fuzzy numbers, then equality between the results of measurements had to be more complicated than crisp equations. The problem of impossible reduction could lie in fuzzy sets with an empty core or whose membership functions were only partly congruent. Reduction is impossible may thus be reconstructed as there is no core to the intersection of two measures. I describe Dirichlet maps for fuzzy measurements of distance as a rough partition of the universe, where for any region A there may be a non-empty set of - _A (upper approximation minus lower approximation), where the problem of impossible reduction applies. This model may easily be combined with probabilistic extention. The possibility of adopting practical decision standards based on -cuts (and therefore applying interval analysis to fuzzy equations) is discussed in this context. I propose to characterize the uncertainty that was presumably capped by the old sages as U-uncertainty, defined, for a non-empty fuzzy set A on the set of real numbers, whose -cuts are intervals of real numbers, as U(A) = 1/h(A) ₀ ^h(A) log [1+(A)]d, where h(A) is the largest membership value obtained by any element of A and (A) is the measure of the -cut of A defined by the Lebesge integral of its characteristic function.     

Computable processes and bisimulation equivalence

A process is calledcomputable if it can be modelled by a transition system that has a recursive structure—implying finite branching. The equivalence relation between transition systems considered is strong bisimulation equivalence. The transition systems studied in this paper can be associated to processes specified in common specification languages such as CCS, LOTOS, ACP and PSF. As a means for defining transition systems up to bisimulation equivalence, the specification languageCRL is used. Two simple fragments of,CRL are singled out, yielding universal expressivity with respect to recursive and primitive recursive transition systems. For both these domains the following properties are classified in the arithmetical hierarchy:bisimilarity, perpetuity (both ₁ ⁰ ),regularity (having a bisimilar, finite representation, ₂ ⁰ ),acyclic regularity ( ₁ ⁰ ), anddeadlock freedom (distinguishing deadlock from successful termination, ₁ ⁰ ). Finally, it is shown that in the domain of primitive recursive transition systems over a fixed, finite label set, a genuine hierarchy in bisimilarity can be defined by the complexity of the witnessing relations, which extends r.e. bisimilarity. Hence, primitive recursive transition systems already form an interesting class.     

On a Stroboscopic Approach to Quantum Tomography of Qudits Governed by Gaussian Semigroups

In this paper, we discuss the minimal number of observables Q ₁, ..., Q , where expectation values at some time instants t ₁, ..., t _r determine the trajectory of a d-level quantum system (qudit) governed by the Gaussian semigroup . We assume that the macroscopic information about the system in question is given by the mean values E _j(Q _i) = tr(Q _i(t _j)) of n selfadjoint operators Q ₁, ..., Q _n at some time instants t ₁ < t ₂ < ... < t _r, where n < d ²– 1 and r deg (, ). Here (, ) stands for the minimal polynomial of the generator of the Gaussian flow (t).     

A New Implementation of Automath

This paper presents aut, a modern Automath checker. It is a straightforward re-implementation of the Zandleven Automath checker from the seventies. It was implemented about five years ago, in the programming language C. It accepts both the AUT-68 and AUT-QE dialects of Automath. This program was written to restore a damaged version of Jutting's translation of Landau's Grundlagen. Some notable features: It is fast. On a 1 GHz machine it will check the full Jutting formalization (736 K of nonwhitespace Automath source) in 0.6 seconds. Its implementation of -terms does not use named variables or de Bruijn indices (the two common approaches) but instead uses a graph representation. In this representation variables are represented by pointers to a binder. The program can compile an Automath text into one big Automath single line-style -term. It outputs such a term using de Bruijn indices. (These -terms cannot be checked by modern systems like Coq or Agda, because the -typed -calculi of de Bruijn are different from the -typed -calculi of modern type theory.)The source of aut is freely available on the Web at the address .     

One problem of mathematical optimal control theory

The necessary conditions obtained by the author in a previous study for the extremum of a functional that depends on the control function on the compact set and on a -measurable subset in (where is the ordinary Lebesgue measure) subject to functional equality and inequality constraints are generalized here to an arbitrary continuous Radon measure.Translated from Kibernetika, No. 4, pp. 69–73, July–August, 1990.     

Minimization of norms and logarithmic norms by diagonal similarities

It is a commonly occurring problem to find good norms · or logarithmic norms (·) for a given matrix in the sense that they should be close to respectively the spectral radius (A) and the spectral abscissa (A). Examples may be the certification thatA is convergent, i.e. (A)A<1 or stable, i.e. (A)(A)<0. Often the ordinary norms do not suffice and one would like to try simple modifications of them such as using an ordinary norm for a diagonally transformed matrix. This paper treats this problem for some of the ordinary norms.

---

Minimisierung von Normen und Logarithmischen Normen durch Diagonale Transformationen

Zusammenfassung Ein oft vorkommendes praktisches Problem ist die Konstruktion von guten Normen · und logarithmischen Normen (·) für eine gegebene MatrixA. Mit gut wird dann verstanden, daß A den Spektralradius (A)=max |₁| und (A) die Spektralabszisse (A)=max Re _i gut approximieren. Beispiele findet man für konvergente Matrizen wo (A)A<1 gewünscht ist, und für stabile Matrizen wo (A)(A)<0 zu zeigen ist. Wir untersuchen hier, wie weit man mit Diagonaltransformationen und dengewöhnlichsten Normen kommen kann.

     

Three-valued representative systems

A representative system defined onn voters or propositionsi = 1,,n is a functionF: {1,0, -1} ⁿ {1,0, -1} which is monotonic (D E F(D) F(E)), unanimous (F(1,, 1) = 1), dual (F(-D) = -F(D)), and satisfies a positivity property which says that the set of all non-zero vectors in {1, 0, -1} ⁿ for whichF(D) = 0 can be partitioned into two dual subsets each of which has the property that ifD andE are in the subset thenD _i+E _i > 0 for somei. Representative systems can be defined recursively from the coordinate projectionsS _i (D) = D _i using sign functions, and in this format they are interpreted as hierarchical voting systems in which outcomes of votes in lower levels act as votes in higher levels of the system. For each positive integern, (n) is defined as the smallest positive integer such that all representative systems defined on {1, 0, -1} ⁿ can be characterized by(n) or fewer hierarchical levels. The function is nondecreasing inn, unbounded above, and satisfies(n) n–1 for alln. In addition,(n) = n–1 forn {1, 2, 3, 4}, and it is conjectured that does not continue to grow linearly asn increases.     

Conditions for the Light-Traffic Insensitivity to Loss Probability in a GI/G/m/0 Queueing System

A loss queueing system GI/G/m/0 is considered. Let a(x) be a p.d.f. of interarrival intervals. Assume that this function behaves like cx^-1 for small x. Further let B(x) be a d.f. of service time; (1/) be the mean service time. Conditions are derived for the light-traffic insensitivity of the loss probability to the form of B(x) as (/ ) 0. In particular, the condition = 1 is necessary. Estimates for the loss probability are obtained.     

Formalizing Strong Normalization Proofs of Explicit Substitution Calculi in ALF

The past decade has given rise to a number of explicit substitution calculi. An important question of explicit substitution calculi is that of the termination of the underlying calculus of substitution. Proofs of termination of substitutions fall in two categories: those that are easy because a decreasing measure can be established and those that are difficult because such a decreasing measure is not easy to establish. This paper considers two styles of explicit substitution: and s, for which different termination proof methods apply. The termination of s is guaranteed by a decreasing weight, while a decreasing weight for showing the termination of has not yet been found. These termination methods for and s are formalized in the proof checker ALF. During our process of formally checking the termination of and s we comment on what is needed to make a proof formally checkable.     

Linear Interval Tolerance Problem and Linear Programming Techniques

In this paper, we consider the linear interval tolerance problem, which consists of finding the largest interval vector included in ([A], [b]) = {x R ⁿ | A [A], b [b], Ax = b}. We describe two different polyhedrons that represent subsets of all possible interval vectors in ([A], [b]), and we provide a new definition of the optimality of an interval vector included in ([A], [b]). Finally, we show how the Simplex algorithm can be applied to find an optimal interval vector in ([A], [b]).     

Local determinacy of abstract local dynamical systems

O. Hájek proved in his book Dynamical Systems in the Plane (Chapter III) that there isat most one abstract local dynamical system which is locally equivalent to, or equivalently an extension of, a given elementary dynamical system, and suggested a question of finding reasonable conditions on the latter for the existence ofat least one such abstract local dynamical system. An elementary dynamical system is said to satisfy the No-Intersection Axiom and is called an abstract germ if(x ₁, t) = (x ₂,t) impliesx ₁ =x ₂. We show that is (uniquely) extendable to an abstract local dynamical system if and only if is an abstract germ, and hence the question is completely answered. After introducing various kinds of isomorphisms of abstract germs and abstract local dynamical systems corresponding to those of continuous germs and continuous local dynamical systems, we obtain some sufficient conditions for extendability of isomorphisms and possibility of restriction of them, and thus establish the local determinacy of abstract local dynamical systems up to isomorphisms in some wider categories.Dedicated to Professor Yusuke HAGIHARA in Commemoration of His Seventy-Seventh Anniversary