Optimised methodology for carboxymethylation of (1→3)‐β‐d‐glucan from Yeast (Saccharomyces cerevisiae) and promotion of mechanical activation

With a view to utilise yeast (1→3)‐β‐d ‐glucan as biological response modifiers with better water solubility, carboxymethylation was carried out by a two‐step alkalisation and etherification with monochloroacetic acid. Four technological parameters of carboxymethylation were investigated by orthogonal experiments for obtaining the maximum degree of substitution (DS), apparent viscosity (η) and solubility of carboxymethyl derivatives. In view of the orthogonal analysis, the optimal technological parameters were reaction temperature 50 °C, total reaction time 5 h, 3 mL of 50% sodium hydroxide as the second alkali dosage and 15 mL of 4 m chloroacetic acid. In addition, it was found that ball milling pretreatment for original (1→3)‐β‐d ‐glucan can be an advantage for carboxymethylation. By contrast, DS, η and solubility of carboxymethyl product increased 24%, 6% and 22%, respectively, suggesting the effect of ball milling pretreatment could not be neglected on improvement of DS, η and solubility for carboxymethyl products.     

Simultaneous Analysis of Nε‐(Carboxymethyl)Lysine and Nε‐(Carboxyethyl)Lysine in Foods by Ultra‐Performance Liquid Chromatography‐Mass Spectrometry with Derivatization by 9‐Fluorenylmethyl Chloroformate

Isotope dilution ultra‐performance liquid chromatography–electrospray tandem mass spectrometry with derivatization by 9‐fluorenylmethyl chloroformate was successfully applied to quantify N^ε‐(carboxymethyl)lysine (CML) and N^ε‐(carboxyethyl)lysine (CEL) in processed foods. We demonstrate that this analytical method is well validated for the determination of CML and CEL contents in processed foods. Relative standard deviations (RSD) indicate repeatability (RSD < 6% for CML and CEL) and reproducibility (RSD < 6% for CML and < 7% for CEL) in this method. Percent recovery is also good. We obtain recoveries of 102% to 112% for CML and 86% to 114% for CEL. CML levels detected in the samples vary from 2.29 to 480 mg/kg food, whereas CEL is detected in significantly lower concentrations ranging from 0.56 to 107 mg/kg food. These data could help consumers make better food choices by monitoring intake of advanced glycation end‐products, which may pose a risk to human health.     

α‐(1,4)‐Amylase,but not α‐ and β‐(1,3)‐glucanases,may be responsible for the impaired growth and morphogenesis of Paracoccidioides brasiliensis induced by N‐glycosylation inhibition

The cell wall of Paracoccidioides brasiliensis, which consists of a network of polysaccharides and glycoproteins, is essential for fungal pathogenesis. We have previously reported that N‐glycosylation of proteins such as N‐acetyl‐β‐d ‐glucosaminidase is required for the growth and morphogenesis of P. brasiliensis. In the present study, we investigated the influence of tunycamicin (TM)‐mediated inhibition of N‐linked glycosylation on α‐ and β‐(1,3)‐glucanases and on α‐(1,4)‐amylase in P. brasiliensis yeast and mycelium cells. The addition of 15 µg/ml TM to the fungal cultures did not interfere with either α‐ or β‐(1,3)‐glucanase production and secretion. Moreover, incubation with TM did not alter α‐ and β‐(1,3)‐glucanase activity in yeast and mycelium cell extracts. In contrast, α‐(1,4)‐amylase activity was significantly reduced in underglycosylated yeast and mycelium extracts after exposure to TM. In spite of its importance for fungal growth and morphogenesis, N‐glycosylation was not required for glucanase activities. This is surprising because these activities are directed to wall components that are crucial for fungal morphogenesis. On the other hand, N‐glycans were essential for α‐(1,4)‐amylase activity involved in the production of malto‐oligosaccharides that act as primer molecules for the biosynthesis of α‐(1,3)‐glucan. Our results suggest that reduced fungal α‐(1,4)‐amylase activity affects cell wall composition and may account for the impaired growth of underglycosylated yeast and mycelium cells. © 2013 The Authors. Yeast published by John Wiley & Sons Ltd.     

Amino Acids Inhibitory Effects and Mechanism on 2‐Amino‐1‐Methyl‐6‐Phenylimidazo [4,5‐b]Pyridine (PhIP) Formation in the Maillard Reaction Model Systems

This study was to investigate the inhibitory effects of amino acids (AAs) on the formation of 2‐amino‐1‐methyl‐6‐phenylimidazo [4,5‐b]pyridine (PhIP) and to evaluate the inhibition mechanism of PhIP in Maillard model systems. Different AAs were individually added into model systems heat‐treated at 180 °C/1 h. The PhIP, phenylacetaldehyde (PheAce), and pyrazines derivatives were determined using HPLC and GC‐MS. AAs significantly reduced (P < 0.05) PhIP levels in a dose‐dependent response, ranking as: Trp = Lys > Pro > Leu > Met > Val > Ile > Thr > Phe > Asp, at the highest molar ratio. The PheAce content was gradually reduced with increasing AAs levels, suggesting that AAs may inhibit PhIP formation through scavenging the available PheAce. A correlation between PhIP inhibition and PheAce‐scavenging activity of AAs was observed when PheAce and AAs were heated. The variety and quantity of pyrazines formed are highly depending on the type of AAs.     

N,N‐Bis(2‐hydroxyethyl)formamide as a New Plasticizer for Thermoplastic Starch

N,N‐Bis(2‐hydroxyethyl)formamide (BHF) was synthesized efficiently and used as a new plasticizer for corn starch to prepare thermoplastic starch (TPS). The hydrogen bond interaction between BHF and starch was proven by Fourier‐transform infrared (FT‐IR) spectroscopy. As detected by scanning electron microscopy (SEM), starch granules were completely disrupted and a continuous phase was obtained. The crystallinity of corn starch and BHF‐plasticized TPS (BTPS) was characterized by X‐ray diffraction (XRD). The thermal behavior of glycerol‐plasticized TPS (GTPS) and BTPS was investigated by differential scanning calorimetry (DSC). The water resistance of BTPS was better than that of GTPS. Generally, at low relative humidity (RH), the tensile strength of BTPS was higher than that of GTPS. At high RH, the elongation at break of BTPS was higher than that of GTPS.     

Partial characterization of β‐ d‐xylosidase from wheat malts

Arabinoxylans (AXs) from wheat malts potentially affect beer quality and production. β‐ d ‐Xylosidase is a key enzyme that degrades the main chains of AXs to produce xylose. This study performed a partial characterization of β‐ d ‐xylosidase from wheat malts. The optimal temperature was 70 °C and the enzyme exhibited excellent thermostability, that is, residual activities were 92.6% at 60 °C for 1 h. The enzyme was stable over a pH range of 3.0–6.0 and showed optimum activity at pH 3.5 and 4.5. Kinetic parameters K_m and V_max of wheat malt β‐ d ‐xylosidase against p‐nitrophenyl‐xyloside were 1.74 mmol L⁻¹ and 0.76 m m min⁻¹, respectively. The enzyme activity was severely inhibited by Cu²⁺, moderately inhibited by Mn²⁺, Mg²⁺, Al³⁺, Ca²⁺, Ba²⁺ and Na⁺ and mildly inhibited by Fe³⁺ and Fe²⁺. The partial enzymatic characterization achieved in this study can be used as a theoretical basis for purifying β‐ d ‐xylosidase from wheat malts. Copyright © 2015 The Institute of Brewing & Distilling     

Effects of oxidised linoleic acid on the formation of Nε‐carboxymethyl‐lysine and Nε‐carboxyethyl‐lysine in Maillard reaction system

This study investigated the effects of oxidised linoleic acid (18:2) on N^ε‐carboxymethyl‐lysine (CML) and N^ε‐carboxyethyl‐lysine (CEL) formation in Maillard reaction systems. Model systems of lysine/glucose (L/G), lysine/18:2 (L/18:2), lysine/18:2/glucose (L/18:2/G), myofibrillar protein/glucose (MFP/G), MFP/18:2 and MFP/18:2/G were maintained at 37 °C for 6 weeks. The results showed that CML/CEL contents in L/G (6.99 and 0.96 mmol mol^?1 lysine, respectively) were significantly higher than those in L/18:2/G (1.43 and 0.41 mmol mol^?1 lysine, respectively), and there is a small amount of CML/CEL generation in L/18:2. However, the CML/CEL levels in MFP/G (197.2 and 83.8 ng mg^?1 protein, respectively) were markedly lower than those in MFP/18:2/G (283.2 and 118.5 ng mg^?1 protein, respectively). 18:2 favours the formation of CML/CEL in MFP/18:2/G, not in L/18:2/G. All these findings indicated that the role of 18:2 on CML/CEL formation in Maillard reaction system was complex, and depended on CML/CEL formation rate and substrate types (lysine or lysine residue in protein).     

Influence of Maillard reaction conditions on the antigenicity of bovine α‐lactalbumin using response surface methodology

BACKGROUND: Maillard reaction can modify functional properties of proteins. Bovine α‐lactalbumin (α‐LA) is often supplemented to the new generation of infant formulae, but it is considered to be a main allergen. However, there is little information on the effect of Maillard reaction on α‐LA antigenicity. The objective of this study was to investigate the influence of Maillard reaction on the antigenicity of α‐LA in conjugates of whey protein isolate (WPI) with glucose under different conditions of protein/sugar weight ratio (0.17–7.83), temperature (40–60 °C) and time (24–120 h) using response surface methodology. RESULTS: Conjugation of WPI with glucose markedly reduced the antigenicity of α‐LA. This reduction in antigenicity could be controlled by regulating the three independent variables weight ratio, temperature and time. A model of optimal reaction conditions for lower antigenicity of α‐LA was established. According to the model, the minimum antigenicity of α‐LA was achieved at 52.8 °C, 78 h and 5.96:1 WPI/glucose weight ratio. WPI/glucose weight ratio had the greatest effect on the antigenicity of α‐LA, while reaction temperature influenced α‐LA antigenicity to a lesser extent. CONCLUSION: Well‐controlled Maillard reaction between WPI and glucose is an efficient method to reduce α‐LA antigencity. Copyright © 2009 Society of Chemical Industry     

Maintaining quality and bioactive compounds of broccoli by combined treatment with 1‐methylcyclopropene and 6‐benzylaminopurine

BACKGOUND: Broccoli deteriorates very quickly after harvest at ambient temperature due to the loss of green colour and the consequent yellowing of florets. To search for an effective method to control quality deterioration, the effect of 1‐methylcyclopropene (1‐MCP) combined with 6‐benzylaminopurine (6‐BA) treatment on visual quality, antioxidant enzymes and bioactive compounds in broccoli florets were investigated. RESULTS: A combined treatment of 2.5 µL L^?1 1‐MCP and 200 mg L^?1 6‐BA significantly reduced the increase of lightness (L*) value, and retained a high level for the hue value (H) and chlorophyll content. Superoxide dismutase, ascobate peroxidase and catalase activities increased while the activity of peroxidase decreased during storage in treated samples in comparison with the controls. The combined treatment enhanced the biosynthesis of glucosinolate and the formation of the anticarcinogen sulforaphane, which improved the health benefit of broccoli. CONCLUSION: These results indicate that a combined treatment of 1‐MCP and 6‐BA could be a good candidate for maintaining the visual quality and enhancing the nutritional value in broccoli during storage at 15 °C. © 2012 Society of Chemical Industry