Characteristics of Rofecoxib-Polyethylene Glycol 4000 Solid Dispersions and Tablets Based on Solid Dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion–based rofecoxib tablets by the direct compression method. Solid dispersion–based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion–based oral tablets.     

非诺贝特固体分散片的试制

以PEG4000和十二烷基硫酸钠为载体，采用溶剂—熔融法制备了非诺贝特固体分散体，再与适当辅料混合压片制得非诺贝特固体分散片。用正交设计表L9(3^4)筛选处方。溶出度实验表明自制片较市售两种制剂溶出快。     

Characteristics of rofecoxib-polyethylene glycol 4000 solid dispersions and tablets based on solid dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion-based rofecoxib tablets by the direct compression method. Solid dispersion-based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion-based oral tablets.     

Designing an extended release waxy matrix tablet containing nicardipine–hydroxy propyl β cyclodextrin complex

Aim

The current study aimed to prepare a sustained release tablet for a drug which has poor solubility in alkaline medium using complexation with cyclodextrin. Nicardipine hydrochloride (NC) a weak basic drug was chosen as a model drug for this study.

Method

Firstly the most suitable binary system NC-HPβCD was selected in order to improve drug solubility in the intestinal media and then embedding the complexed drug into a plastic matrix, by fusion method, consists of glycerol monostearate (GMS) as an inert waxy substance and polyethylene glycol 4000 (PEG4000) as a channeling agent, after that the final solid dispersion [(NC:HPβCD):GMS:PEG4000] which was prepared at different ratios was mixed with other excipients, avicel PH101, lactose, and talc, to get a tablet owning dissolution profile complying with the FDA and USP requirements for the extended release solid dosage forms.

Results

Infrared spectroscopy (IR), differential scanning colorimetry (DSC), polarized microscopy and X-ray diffractometry proved that the coevaporation technique was effective in preparing amorphous cyclodextrin complexes with NC and trapping of NC within the HPβCD cavity by dissolving both in ethanol and evaporate the solvent using a rotavapor at 65 °C. Dissolution profile of NC enhanced significantly in pH 6.8 from NC:HPβCD inclusion complex prepared by the rotavapor (t-test Student p < 0.05). The release of NC from tablet containing [(NC:HPβCD):GMS:PEG4000] [(1):0.75:0.5] (w/w/w) solid dispersion (F8) was complying with the FDA dissolution requirements for extended release dosage forms, and studying the kinetics of the release showed that the diffusional contribution is the major factor controlling the drug release from that formula.

Conclusion

The prepared waxy matrix tablet containing NC complexes with CD shows promising results as extended release tablets.     

尼群地平固体分散片的制备及体外评价

目的 制备尼群地平固体分散片.方法 采用溶剂法、熔融法制备尼群地平固体分散体,再与适当辅料混合压片制备分散片.结果 采用固体分散法制备的分散片较原料药直接制备的分散片溶出更快,且聚乙二醇(PEG)为载体制备的分散片较聚乙烯吡咯烷酮(PVP)溶出更快.结论 先制备固体分散体再制备分散片,有助于提高难溶性药物的溶出速度和程度.     

Preparation and characterization of emulsified solid dispersions containing docetaxel

An emulsified solid dispersion of docetaxel was prepared and characterized in vitro. In contrast to conventional solid dispersions, emulsifying pharmaceutical excipients and hydroxypropyl methylcellulose (HPMC) as a supersaturation promoter were introduced into the PEG6000-based solid dispersion to further improve its solubilizing capability. The solubility, dissolution in vitro and stability of the prepared emulsified solid dispersions were studied taking into consideration of the effects of different emulsifying excipients, preparation methods and the media. Results of the emulsified solid dispersion of docetaxel showed that the solubility and dissolution at 2 h were 34.2- and 12.7-fold higher than the crude powder. The type of emulsifying excipient used had a significant influence on the dissolution of the emulsified solid dispersion. The dissolution of the emulsified solid dispersion prepared by the solvent-melting method or the solvent method was higher than the melting method. There were no apparent differences among the dissolution media utilized. The status of the drug in the emulsified solid dispersion was observed in an amorphous or a molecular dispersion state by differential thermal analysis and powder Xray diffraction. In conclusion, the incorporation of emulsifying pharmaceutical excipients and HPMC with polymers into a solid dispersion could be a new and useful tool to greatly increase the solubility and dissolution of poorly water-soluble drugs.     

Physicochemical Characterization and Dissolution Study of Solid Dispersions of Lovastatin with Polyethylene Glycol 4000 and Polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to‐carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile of Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Physicochemical characterization and dissolution study of solid dispersions of Lovastatin with polyethylene glycol 4000 and polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Preparation and Evaluation of Fast Dissolving Ibuprofen-Polyethylene Glycol 6000 Solid Dispersions

To improve its oral absorption, rapidly dissolving ibuprofen solid dispersions (SD) were prepared in a relatively easy, simple, quick, inexpensive, and reproducible manner, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). They were evaluated for solubility, in vitro release, and oral bioavailability of ibuprofen in rats. Loss of individual surface properties during melting and resolidification as revealed by SEM indicated the formation of effective SDs. Absence or shifting toward the lower melting temperature of the drug peak in SDs and physical mixtures in DSC study indicated the possibilities of drug-polymer interactions. However, no such interactions in the solid state were confirmed by FTIR spectra that showed the presence of drug crystalline in SDs. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C_max, and a significant decrease in T_max over pure ibuprofen. Preliminary results from this study suggested that the preparation of fast-dissolving ibuprofen SDs by low temperature melting method using PEG 6000 as a meltable hydrophilic polymer carrier could be a promising approach to improve solubility, dissolution, and absorption rate of ibuprofen.     

Fast disintegrating tablets of nisoldipine for intra-oral administration

Abstract

Nisoldipine is a calcium channel blocker with low and variable oral bioavailability. This was attributed to slow dissolution and presystemic metabolism. Accordingly, the objective of this work was to enhance the dissolution rate of nisoldipine to formulate fast disintegrating tablets with rapid dissolution. Binary solid dispersions (SD) were prepared for the drug with hydroxypropyl methyl cellulose E5 (HPMC), polyvinylpyrrolidone (PVP), Pluronic F68 or polyethylene glycol 6000 (PEG 6000). SD formation increased the dissolution rate compared to pure drug with the corresponding physical mixtures failing to provide the same dissolution enhancement. This indicates that the SD enhanced dissolution is not due to the solubilizing effect of the polymer and can be due to physical change in the drug crystal which was confirmed by thermal analysis. SD with HPMC and PVP were selected for preparation of fast disintegrating tablets as they liberated most of the drug in the first 5?min. HPMC-based tablets disintegrated rapidly and released most of the drug in the first 2?min which correlated with the corresponding SD. In contrast, PVP-based tablets disintegrated slowly with gradual dissolution. This can be attributed to the binding effect of PVP. The study developed fast disintegrating tablet for intra-oral administration.     

替硝唑固体分散体的制备及其体外释放特性研究

目的:利用固体分散技术制备替硝唑固体分散体,增加替硝唑溶解度和溶出速度。方法:以聚乙二醇(PEG)为载体材料,采用溶剂-熔融法制成固体分散体,测定表观溶解度,进行体外溶出试验,并采用差示扫描量热(DSC)法鉴别药物在固体分散体中的存在状态。结果:替硝唑的溶出度和表观溶解度随PEG的比例不同而不同,且溶出度随载体用量增加而增加。固体分散体的DSC曲线中替硝唑药物的特征熔融峰消失。结论:所制得的固体分散体能明显提高替硝唑的溶出度和表观溶解度。     

Preparation of esomeprazole zinc solid dispersion and study on its pharmacokinetics

Esomeprazole zinc (EZ) is a poorly water-soluble substance. In order to increase its dissolution rate and bioavailability, solid dispersions of esomeprazole zinc (SDEZ) in polyethylene glycol 4000 (PEG4000) with different EZ to PEG4000 ratios were prepared by solvent method. Our studies showed that dissolution rate of EZ were distinctively increased in the solid dispersion system compared to that in pure EZ or physical mixtures. The increase of dissolution rate was obviously related to the ratio of EZ to PEG4000. The solid dispersion system (EZ/PEG4000=1/8, w/w) gave the highest dissolution rate: about 14.7-fold higher than that of the pure EZ. EZ was proved to be in amorphous state in this solid dispersion by using differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) techniques. In vivo administration studies, SDEZ in enteric capsule (SDEZ-EC) has a lower Cmax and a longer Tmax than that of esomeprazole magnesium enteric-coated tablet (Nexium), and the differences of Cmax and Tmax between SDEZ-EC and Nexium are significant. This result suggests SDEZ-EC has a lower absorption rate than Nexium and corresponds with the in vitro dissolution.     

尼莫地平固体分散物的制备及其片剂溶出度的研究

目的：提高难溶性药物尼莫地平的溶出速率。方法：选用PVP－k30和PEG6000为载体制备了不同晶型尼莫地平固体分散物和机械混合物，比较了它们片剂体外的溶出速率。结果：尼莫地平固体分散物的片剂溶出度高于机械混合物的，低熔点机械混合物片剂溶出度高于高熔点的，不同晶型尼莫地平PEG6000固体分散物片剂体外的溶出速率无显著性差异，低熔点尼莫地平PVK－k30固体分散物的片剂的90min累积溶出量比高熔点的高。结论：不同晶型尼莫地平制备成PVP-k30和PEG6000固体分散物都可以提高其片剂体外的溶出度。     

Improvement of solubility and dissolution rate of indomethacin by solid dispersions in Gelucire 50/13 and PEG4000

The aim of this study was to prepare and characterize solid dispersions of water insoluble non-steroidal anti-inflammatory drug, indomethacin (IND), with polyethylene glycol 4000 (PEG4000) and Gelucire 50/13 (Gelu.) for enhancing the dissolution rate of the drug. The solid dispersions (SDs) were prepared by hot melting method at 1:1, 1:2 and 1:4 drug to polymer ratios. Scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) were used to examine the physical state of the drug. Furthermore, the solubility and the dissolution rate of the drug in its different systems were explored. The data from the XRD showed that the drug was still detectable in its solid state in all SDs of IND–Gelu. and disappeared in case of higher ratio of IND–PEG4000. DSC thermograms showed the significant change in melting peak of the IND when prepared as SDs suggesting the change in crystallinity of IND. The highest ratio of the polymer (1:4) enhanced the drug solubility about 4-folds or 3.5-folds in case of SDs of IND–PEG or IND–Gelu., respectively. An increased dissolution rate of IND at pH 1.2 and 7.4 was observed when the drug was dispersed in these carriers in form of physical mixtures (PMs) or SDs. IND released faster from the SDs than from the pure crystalline drug or the PMs. The dissolution rate of IND from its PMs or SDs increased with an increasing amount of polymer.     

Preparation and evaluation of immediate release ibuprofen solid dispersions using polyethylene glycol 4000

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared in a relatively easy and simple manner, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR), and evaluated for solubility, in-vitro drug release and oral bioavailability of ibuprofen in rats. Loss of individual surface properties during melting and resolidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting towards the lower melting temperature of the drug peak in SDs and physical mixtures in DSC study indicated the possibilities of drug-polymer interactions. FT-IR spectra showed the presence of drug crystalline in SDs. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and Cmax, and a significant decrease in Tmax over pure ibuprofen. Preliminary results from this study suggested that the preparation of fast dissolving ibuprofen SDs by low temperature melting method using polyethylene glycol 4000 (PEG 4000) as a meltable hydrophilic polymer carrier could be a promising approach to improve solubility, dissolution and absorption rate of ibuprofen.     

茴三硫-聚乙二醇类固体分散体的研究

目的制备茴三硫固体分散体,提高其溶解度和溶出速率。方法以不同分子量不同比例的聚乙二醇为载体,以熔融法制备固体分散体,并进行体外溶出度研究和DSC扫描。结果茴三硫与聚乙二醇可形成低共熔物,并使溶出度大大增加,载体比例越大,药物溶出愈快。结论本试验所制茴三硫固体分散体能加速体外溶出,体外溶出与载体分子量无关,但与固体分散体载体比例有关。     

Preparation and characterization of solid dispersions of Quercetin with PEG4000

Objective To enhance the solubility,quicken the speed of digesting and absorption,and increase the bioavailability of quercetin(3,3',4',5,7-pentahydroxyflavone).Methods A series of Quercetin-PEG4000 solid dispersions were prepared by fusion method.The configuration and property of solid dispersion were characterized by solubility tests,dissolution tests,FTIR spectra,differential scanning calorimetry(DSC)and microphotograph.Results 1.According to solubility tests the the mass ratio of quercetin to PEG4000 affected strongly on the solubility of solid dispersions,on the whole,the relation of the solubility of solid dispersions to the mass ratio presented linear relationship.The preparation temperature had little effect on the solubility of solid dispersions.The surface-active agent,polysorbate80 increased strongly the solubility of solid dispersions.2.According to the dissolution tests,the mass ratio of quercetin to PEG4000 affected strongly on the dissolution of solid dispersions,the preparation temperature had little effect on the dissolution of solid dispersions.The surface-active agent,polysorbate80 increased strongly the dissolution of solid dispersions,and after addition polysorbate80,the dissolution of solid dispersions was two times of the dissolution of solid dispersions without polysorbate80.3.According to the DSC results,except that a little of quercetin molecular existed as crystalline state in the solid dispersion with the mass ratio was qu:PEG=1:2,quercetin existed as amorphous phase in other mass ratio solid dispersion.4.According to the FTIR spectra and microphotograph results,the relation of quercetin and PEG4000 was mainly physical mixing in quercetin-PEG4000 solid dispersion.Quercetin was just like solute in solution,and PEG4000 was just like solvent in solution.The force between quercetin and PEG4000 was mainly hydrogen bonding,so the biological activity of quercetin would not be influenced greatly after the formation solid dispersion.Conclusions These results suggest that quercetin existed mainly as amorphous phase in solid dispersion;the solubility and the dissolution in water were increased obviously after formation the solid dispersion.     

茴三硫-聚乙二醇类固体分散体的研究

目的 制备茴三硫固体分散体，提高其溶解度和溶出速率.方法 以不同分子量不同比例的聚乙二醇为载体，以熔融法制备固体分散体，并进行体外溶出度研究和DSC扫描.结果 茴三硫与聚乙二醇可形成低共熔物，并使溶出度大大增加，载体比例越大，药物溶出愈快.结论 本试验所制茴三硫固体分散体能加速体外溶出，体外溶出与载体分子量无关，但与固体分散体载体比例有关。     

A calorimetric investigation into the interaction between paracetamol and polyethlene glycol 4000 in physical mixes and solid dispersions.

The solubility, heat of solution and dissolution rate of paracetamol and polyethyelene glycol 4000 (PEG 4000) systems have been studied in order to clarify the nature of the interaction between the two components during dissolution of solid dispersions. The logarithmic solubility of paracetamol demonstrated a non-linear increase with concentration of PEG 4000, while linear relationships between heat of solution in water and concentration were seen for both individual components. However, the heat of solution of paracetamol was found to decrease with increasing concentrations of PEG 4000. Similarly, the heats of solution in water of physical mixes and solid dispersions prepared using two manufacturing protocols were found to be lower than the theoretical values calculated from those corresponding to the individual components. Drug release studies showed a marked increase in paracetamol dissolution rate when prepared as a solid dispersion, with behaviour consistent with carrier controlled dissolution observed at low drug contents which was ascribed to enhanced dissolution of the drug into the diffusion layer of the PEG 4000. The implications of the understanding of this mechanism for the choice of carrier and manufacturing protocol for solid dispersion products is discussed.     

Implication of inclusion complexation of glimepiride in cyclodextrin-polymer systems on its dissolution, stability and therapeutic efficacy

The effect of complexation of glimepiride, a poorly water-soluble antidiabetic drug, with β-cyclodextrin and its derivatives (HP-β-CyD and SBE-β-CyD) in presence of different concentrations of water-soluble polymers (HPMC, PVP, PEG 4000 and PEG 6000) on the dissolution rate of the drug has been investigated. The results revealed that the dissolution rate of the drug from these ternary systems is highly dependent on polymer type and concentration. The dissolution rate of the drug from ternary systems containing PEG 4000 or PEG 6000 seems to be generally higher than from systems containing HPMC or PVP. An optimum increase in the dissolution rate of the drug was observed at a polymer concentration of 5% for PEG 4000 or PEG 6000 and at 20% concentration of HPMC or PVP. The dissolution rate of the drug from the ternary system glimepiride–HP-β-CyD–5% PEG 4000 was high compared to the other systems. Tablets containing the drug or its equivalent amount of this ternary system were prepared and subjected to accelerated stability testing at 40 °C/75% R.H. to investigate the effect of storage on the chemical stability as well as therapeutic efficacy of the tablets. The results revealed stability of the tablets and consistent therapeutic efficacy on storage.