Replication origin mutations affecting binding of pSC101 plasmid-encoded Rep initiator protein.

To investigate the role of binding sites for Rep initiation protein in the replication of pSC101, a series of plasmids was constructed which carried different combinations of mutations in three binding sites within the minimal origin of replication. Mutation of all three sites reduced the affinity of purified Rep protein for the origin by 100-fold, as measured by a competition binding assay. Mutations in individual binding sites prevented binding of Rep protein to the mutant site but not to adjacent wild-type sites. Transformation efficiency, copy number, and stability over 150 generations were measured for each of the mutant plasmids. Unlike other similar plasmids related to pSC101, the Rep binding sites were found not to be equivalent. A mutation in the site RS1, proximal to repeated sequences which serve as DnaB helicase entry sites in oriC, had a severe effect on replication activity. A similar mutation in the distal site RS3 caused a reduction in copy number, but the mutant plasmid was stably maintained despite a broadened distribution of copy number within the population. A mutation in the middle RS2 site had no significant effect on pSC101 replication.     

A new system for amplifying 2 μm plasmid copy number in Saccharomyces cerevisiae

The yeast 2 microns plasmid is found in the nucleus of almost all Saccharomyces cerevisiae strains. Its replication is very similar to that of chromosomal DNA. Although the plasmid does not encode essential genes it is stably maintained in the yeast population and exhibits only a small, though detectable, loss rate. This stability is achieved by a plasmid-encoded copy-number control system which ensures constant plasmid levels. For the investigation of 2 microns replication, a yeast strain that is absolutely dependent on this plasmid was constructed. This was achieved by disruption of the chromosomal CDC9 gene, coding for DNA ligase and providing this essential gene on a 2 microns-derived plasmid. This plasmid is absolutely stable under all growth conditions tested. Using the temperature-sensitive mutant allele cdc9-1 we have developed an artificial control system which allows one to change the copy number of 2 microns-derived plasmids solely by changing the incubation temperature.     

Plasmid models for bacteriophage T4 DNA replication: requirements for fork proteins.

Bacteriophage T4 DNA replication initiates from origins at early times of infection and from recombinational intermediates as the infection progresses. Plasmids containing cloned T4 origins replicate during T4 infection, providing a model system for studying origin-dependent replication. In addition, recombination-dependent replication can be analyzed by using cloned nonorigin fragments of T4 DNA, which direct plasmid replication that requires phage-encoded recombination proteins. We have tested in vivo requirements for both plasmid replication model systems by infecting plasmid-containing cells with mutant phage. Replication of origin and nonorigin plasmids strictly required components of the T4 DNA polymerase holoenzyme complex. Recombination-dependent plasmid replication also strictly required the T4 single-stranded DNA-binding protein (gene product 32 [gp32]), and replication of origin-containing plasmids was greatly reduced by 32 amber mutations. gp32 is therefore important in both modes of replication. An amber mutation in gene 41, which encodes the replicative helicase of T4, reduced but did not eliminate both recombination- and origin-dependent plasmid replication. Therefore, gp41 may normally be utilized for replication of both plasmids but is apparently not required for either. An amber mutation in gene 61, which encodes the T4 RNA primase, did not eliminate either recombination- or origin-dependent plasmid replication. However, plasmid replication was severely delayed by the 61 amber mutation, suggesting that the protein may normally play an important, though nonessential, role in replication. We deleted gene 61 from the T4 genome to test whether the observed replication was due to residual gp61 in the amber mutant infection. The replication phenotype of the deletion mutant was identical to that of the amber mutant. Therefore, gp61 is not required for in vivo T4 replication. Furthermore, the deletion mutant is viable, demonstrating that the gp61 primase is not an essential T4 protein.     

Mutations of temperature sensitivity in R plasmid pSC101.

Temperature-sensitive (Ts) mutant plasmids isolated from tetracycline resistance R plasmid pSC101 were investigated for their segregation kinetics and deoxyribonucleic acid (DNA) replication. The results fit well with the hypothesis that multiple copies of a plasmid are distributed to daughter cells in a random fashion and are thus diluted out when a new round of plasmid DNA replication is blocked. When cells harboring type I mutant plasmids were grown at 43 degrees C in the absence of tetracycline, antibiotic-sensitive cells were segregated after a certain lag time. This lag most likely corresponds to a dilution of plasmids existing prior to the temperature shift. The synthesis of plasmid DNA in cells harboring type I mutant plasmids was almost completely blocked at 43 degrees C. It seems that these plasmids have mutations in the gene(s) necessary for plasmid DNA replication. Cells haboring a type II mutant plasmid exhibited neither segregation due to antibiotic sensitivity nor inhibition of plasmid DNA replication throughout cultivation at high temperature. It is likely that the type II mutant plasmid has a temperature-sensitive mutation in the tetracycline resistance gene. Antibiotic-sensitive cells haboring type III mutant plasmids appeared at high frequency after a certain lag time, and the plasmid DNA synthesis was partially suppressed at the nonpermissive temperature. They exhibited also a pleiotrophic phenotype, such as an increase of drug resistance level at 30 degrees C and a decrease in the number of plasmid genomes in a cell.     

New mutations in cloned Escherichia coli umuDC genes: novel phenotypes of strains carrying a umuC125 plasmid

The umuDC locus of Escherichia coli is required for most mutagenesis by UV and many chemicals. Mutations in E. coli umuDC genes cloned on pBR322-derived plasmids wer e isolated by two methods. First, spontaneously-arising mutant umuDC plasmids that failed to confe cold-sensitive growth on a lexA51(Def) strain were isolated by selection. Second, mutant umuDC plasmids that affected apparent mutant yield after UV-irradiation in a strain carrying umuD⁺C⁺ in the chromosome were isolated by screening hydroxylamine-mutagenized umuD⁺C⁺ plasmids. pBR322-derived umuD⁺C⁺ plasmids inhibited the induction of the SOS response of lexA⁺ strains as measured by expression of din::Mu dl(lac) Ap) fusionsbut most mutant plasmids did not. Mutant plasmids defective in complementation of chromosomal umuD44, umuC36, or both were found among those selected for failure to confer cold-sensitivity, whereas those identified by the screening procedure yielded mostly mutant plasmids with more complex phenotypes. We studied in greater detail a plasmid pLM109, carrying the umuC125 mutation. This plasmid increased the sensitivity of lexA⁺ strainsto killing by UV-irradiation but was able to complement the deficiencies of umuC mutants in UV mutagenesis. pLM109 failed to confer cold-sensitive growth on lexA(Def) strains but inhibited SOS induction in lexA⁺ strains. The effect of pLM109 on the UV sensitivity of lexA(Def)strains was similar to that of the parental umuD⁺C⁺ plasmid. The mutation responsible for the phenotypes of pLM109 was localized to a 615-bp fragment. DNA sequencing revealed that the umuC125 mutation was a G:C → A:T transition that changed codon 39 of umuC from GCC → GTC thus changing Ala39 to Val39. The implications of the umuC125 mutation for umuDC-dependent effects on UV-mutagenesis and cell survival after UV damage are discussed.     

Role of the cgtA gene function in DNA replication of extrachromosomal elements in Escherichia coli

The cgtA gene codes for a common GTP-binding protein whose homologues were found in all prokaryotic and eukaryotic organisms investigated so far. Although cgtA is an essential gene in most bacterial species, its precise functions in the regulation of cellular processes are largely unknown. In Escherichia coli, dysfunction or overexpression of the cgtA gene causes problems in various chromosomal functions, like synchronization of DNA replication initiation and partitioning of daughter chromosomes after a replication round. It is not know how the cgtA gene product regulates these processes. Here we investigated effects of cgtA dysfunction on replication of plasmid and phage replicons. We found that replication of some plasmids (e.g., ColE1-like) is not affected in the cgtA mutant. On the other hand, dysfunction of the cgtA gene caused a strong inhibition of lambda plasmid DNA replication. Bacteriophage lambda development was severely impaired in the cgtA mutant. Replication of other plasmid replicons (derivatives of F, R1, R6K, and RK2) was influenced by the cgtA mutation moderately. It seems that DNA synthesis per se is not affected by CgtA, and that this protein might control replication initiation indirectly, by regulation of function(s) or production of one or more replication factors. In fact, we found that level of the host-encoded replication protein DnaA is significantly decreased in the cgtA mutant. This indicates that CgtA is involved in the regulation of dnaA gene expression.     

DNA primase of plasmid ColIb is involved in conjugal DnA synthesis in donor and recipient bacteria.

The sog gene of the IncI alpha group plasmid ColIb is known to encode a DNA primase that can substitute for defective host primase in dnaG mutants of Escherichia coli during discontinuous DNA replication. The biological significance of this enzyme was investigated by using sog mutants, constructed from a derivative of ColIb by in vivo recombination of previously defined mutations in a cloned sog gene. The resultant Sog- plasmids failed to specify detectable primase activity and were unable to suppress a dnaG lesion. These mutants were maintained stably in E. coli, implying that the enzyme is not involved in vegetative replication of ColIb. However, the Sog- plasmids were partially transfer deficient in E. coli and Salmonella typhimurium matings, consistent with the hypothesis that the normal physiological role of this enzyme is in conjugation. This was confirmed by measurements of conjugal DNA synthesis. Studies of recipient cells have indicated that plasmid primase is required to initiate efficient synthesis of DNA complementary to the transferred strand, with the protein being supplied by the donor parent and probably transmitted between the mating cells. Primase specified by the dnaG gene of the recipient can substitute partially for the mutant enzyme, thus providing an explanation for the partial transfer proficiency of the mutant plasmids. Conjugal DNA synthesis in dnaB donor cells was deficient in the absence of plasmid primase, implying that the enzyme also initiates synthesis of DNA to replace the transferred material.     

Multiple roles for DNA polymerase I in establishment and replication of the promiscuous plasmid pLS1

The polymerase activity of DNA polymerase I is important for the establishment of the pLS1 replicon by reconstitutive assembly in Streptococcus pneumoniae after uptake of exogenous pLS1 plasmid DNA. In polA mutants lacking the polymerase domain, such establishment was reduced at least 10-fold in frequency. Chromosomally facilitated establishment of pLS1-based plasmids carrying DNA homologous to the host chromosome was not so affected. However, both types of plasmid transfer gave mostly small colonies on initial selection, which was indicative of a defect in replication and filling of the plasmid pool. Once established, the pLS1-based plasmids replicated in polA mutants, but they showed segregational instability. This defect was not observed in strains with the wild-type enzyme or in an S. pneumoniae strain that encodes the polymerase and exonuclease domains of the enzyme on separate fragments. The role of DNA polymerase I in stably maintaining the plasmids depends on its polymerizing function in three separate steps of rolling-circle replication, as indicated by the accumulation of different replication intermediate forms in polA mutants. Furthermore, examination of the segregational stability of the pLS1 replicon in an Escherichia coli mutant system indicated that both the polymerase and the 5′-to-3′ exonuclease activities of DNA polymerase I function in plasmid replication.     

Integrative and free Spiroplasma citri oriC plasmids: expression of the Spiroplasma phoeniceum spiralin in Spiroplasma citri.

The replication region (oriC) of the Spiroplasma citri chromosome has been recently sequenced, and a 2-kbp DNA fragment was characterized as an autonomously replicating sequence (F. Ye, J. Renaudin, J. M. Bové, and F. Laigret, Curr. Microbiol. 29:23-29, 1994). In the present studies, we have combined this DNA fragment, containing the dnaA gene and the flanking dnaA boxes, with a ColE1-derived Escherichia coli replicon and the Tet M determinant, which confers resistance to tetracycline. The recombinant plasmid, named pBOT1, was introduced into S. citri cells, in which it replicated. Plasmid pBOT1 was shuttled from E. coli to S. citri and back to E. coli. In S. citri, replication of pBOT1 did not require the presence of a functional dnaA gene on the plasmid. However, the dnaA box region downstream of the dnaA gene was essential. Upon passaging of the S. citri transformants, the plasmid integrated into the spiroplasmal host chromosome by recombination at the replication origin. The integration process led to duplication of the oriC sequences. In contrast to the integrative pBOT1, plasmid pOT1, which does not contain the E. coli replicon, was stably maintained as a free extrachromosomal element. Plasmid pOT1 was used as a vector to introduce into S. citri the G fragment of the cytadhesin P1 gene of Mycoplasma pneumoniae and the spiralin gene of Spiroplasma phoeniceum. The recombinant plasmids, pOTPG with the G fragment and pOTPS with the spiralin gene, were stably maintained in spiroplasmal transformants. Expression of the heterologous S. phoeniceum spiralin in S. citri was demonstrated by Western immunoblotting.     

Construction and characterization of a highly efficient Francisella shuttle plasmid

Francisella tularensis is a facultative intracellular pathogen that infects a wide variety of mammals and causes tularemia in humans. It is recognized as a potential agent of bioterrorism due to its low infectious dose and multiple routes of transmission. To date, genetic manipulation in Francisella spp. has been limited due to the inefficiency of DNA transformation, the relative lack of useful selective markers, and the lack of stably replicating plasmids. Therefore, the goal of this study was to develop an enhanced shuttle plasmid that could be utilized for a variety of genetic procedures in both Francisella and Escherichia coli. A hybrid plasmid, pFNLTP1, was isolated that was transformed by electroporation at frequencies of >1 x 10(7) CFU mug of DNA(-1) in F. tularensis LVS, Francisella novicida U112, and E. coli DH5alpha. Furthermore, this plasmid was stably maintained in F. tularensis LVS after passage in the absence of antibiotic selection in vitro and after 3 days of growth in J774A.1 macrophages. Importantly, F. tularensis LVS derivatives carrying pFNLTP1 were unaltered in their growth characteristics in laboratory medium and macrophages compared to wild-type LVS. We also constructed derivatives of pFNLTP1 containing expanded multiple cloning sites or temperature-sensitive mutations that failed to allow plasmid replication in F. tularensis LVS at the nonpermissive temperature. In addition, the utility of pFNLTP1 as a vehicle for gene expression, as well as complementation, was demonstrated. In summary, we describe construction of a Francisella shuttle plasmid that is transformed at high efficiency, is stably maintained, and does not alter the growth of Francisella in macrophages. This new tool should significantly enhance genetic manipulation and characterization of F. tularensis and other Francisella biotypes.     

Analysis of a recessive plasmid copy number mutant: evidence for negative control of Col E1 replication.

The Col E1-derivative copy number mutant plasmid pOP1Δ6 has been used to investigate the control of plasmid replication. pOP1Δ6 normally exists at about 200 copies per chromosome, while the wild-type plasmid from which it was derived (pBGP120) exists at about 15 copies per chromosome. We have observed that in E. coli containing both pOP1Δ6 and pBGP120, the copy number of pOP1Δ6 is lowered to 4–6 copies per chromosome. Thus the mutation in pOP1Δ6 is recessive. The association between the two plasmids is stable in E. coli, indicating that incompatibility properties as well as replication control characteristics have been altered in pOP1Δ6. Co-residence of the unrelated plasmid pSC101 with pOP1Δ6 has no detectable effect on pOP1Δ6 copy number. These results suggest that a plasmid-specific, diffusible repressor may act negatively to control plasmid copy number, and that pOP1Δ6 produces a defective repressor or is altered in repressor synthesis. We have constructed in vitro a plasmid which is identical in size to pQP1Δ6 but contains a replication origin region derived from pBGP120. Since this plasmid, pNOP1, exists stably (like pBGP120) at 10–15 copies per chromosome, the high copy number of pOP1Δ6 is not related to its reduced size relative to pBGP120. To localize the mutation in pOP1Δ6 responsible for DNA overproduction, we have cloned fragments of pBGP120 into pOP1Δ6 and selected for plasmids with wild-type copy number. We find that a 2.0 kb region of pBGP120 DNA surrounding the origin of plasmid DNA replication is capable of suppressing the DNA overproducer phenotype of pOP1Δ6. The 2.0 kb fragment is capable of independent self-replication or can integrate into pOP1Δ6 in vivo to form a composite plasmid with two origins of replication. The overproducer phenotype of pOP1Δ6 is suppressed in either configuration.     

The Mode of Replication Is a Major Factor in Segregational Plasmid Instability in Lactococcus lactis

The effects of the rolling-circle and theta modes of replication on the maintenance of recombinant plasmids in Lactococcus lactis were studied. Heterologous Escherichia coli or bacteriophage λ DNA fragments of various sizes were inserted into vectors based on either the rolling-circle-type plasmid pWV01 or the theta-type plasmid pAMβ1. All pAMβ1 derivatives were stably maintained. pWV01 derivatives, however, showed size-dependent segregational instability, in particular when large DNA fragments were inserted. All recombinant pWV01 derivatives generated high-molecular-weight plasmid multimers (HMW) in amounts that were positively correlated with plasmid size and inversely correlated with the copy numbers of the monomeric plasmid forms. Formation of HMW or reductions in copy numbers were not observed with pAMβ1 derivatives. The results indicate that HMW formation and/or reduction in plasmid copy numbers is an important factor in the maintenance of pWV01 derivatives. It is concluded that theta-type plasmids are superior to rolling-circle-type plasmids for cloning in lactococci.     

A binary-BAC system for plant transformation with high-molecular-weight DNA

A binary-BAC (BIBAC) vector suitable for Agrobacterium-mediated plant transformation with high-molecular-weight DNA was constructed. A BIBAC vector is based on the bacterial artificial chromosome (BAC) library vector and is also a binary vector for Agrobacterium-mediated plant transformation. The BIBAC vector has the minimal origin region of the Escherichia coli F plasmid and the minimal origin of replication of the Agrobacterium rhizogenes Ri plasmid, and thus replicates as a single-copy plasmid in both E. coli and in A. tumefaciens. The T-DNA of the BIBAC vector can be transferred into the plant nuclear genome. As examples, a 30-kb yeast genomic DNA fragment and a 150-kb human genomic DNA fragment were inserted into the BIBAC vector; these constructs were maintained in both E. coli and A. tumefaciens. In order to increase the efficiency of transfer of unusually large BIBAC T-DNAs, helper plasmids that carry additional copies of A. tumefaciens virulence genes virG and virE were constructed. These helper plasmids are compatible with, and can be present in addition to, the BIBAC vector in the A. tumefaciens host. This report details the components of the BIBAC system, providing information essential to the general understanding and the application of this new technology.     

Temperature-sensitive replication of plasmid pKM101

A mutant of Escherichia coli K-12, IB10 carrying the ts10 mutation has been isolated. The mutation affects replication and inheritance of pKM101 plasmid. Incubation of the mutant under non-selective conditions of 42 degrees C resulted in the formation of R-cell population. The frequency of temperature-independent clones was 2,1 X 10(-5). The defect of pKM101 replication was shown to result in growth inhibition of host cells at a non-permissive temperature. The host growth only started after elimination of the plasmid. The mechanisms are likely to exist governing the participation of plasmid gene products in processes related to host growth. The influence of ts10 mutation on replication of other plasmids was studied. It was established that ts10 did not affect replication of R6K, RP4 and Flac+ plasmids. However, replication of R15, R205 as well as of pKM101 plasmid stopped under conditions of non-permissive temperature in IB10 mutant. Obviously, ts10 mutation results in defective replication of plasmids only belonging to the N-incompatibility group (IncPN). It is shown that R6K, RP4, Flac+ plasmids are not able to correct pKM101 replication in the mutant at 42 degrees C.     

Control of Plasmid R1 Replication: Functions Involved in Replication, Copy Number Control, Incompatibility, and Switch-off of Replication

A small derivative of plasmid R1 was used to integratively suppress a chromosomal dnaA(Ts) mutation. The strain obtained grew normally at 42°C. The integratively suppressed strain was used as recipient for various plasmid R1 derivatives. Plasmid R1 and miniplasmid derivatives of R1 could be established in the strain that carried an integrated R1 replicon, but they were rapidly lost during growth. However, plasmids also carrying ColE1 replication functions were almost completely stably inherited. The integratively suppressed strain therefore allows the establishment of bacteria diploid with respect to plasmid R1 and forms a useful and sensitive system for studies of interaction between plasmid R1 replication functions. Several of the chimeric plasmids caused inhibition of growth at high temperatures. All plasmids that inhibited growth carried one particular PstI fragment from plasmid R1 (the PstI F fragment), and in all cases the growth inhibition could be ascribed to repression of initiation of chromosome replication at 42°C, i.e., they carry a trans-acting switch-off function. Furthermore, the analogous PstI fragments from different copy mutants of plasmid R1 were analyzed similarly, and one mutant was found to lack the switch-off function. The different chimeric plasmids were also tested for their incompatibility properties. All plasmids that carried the switch-off function (and no other plasmids) also carried R1 incompatibility gene(s). Since the PstI F fragment, which is present on all these plasmids, is very small (0.35 × 10⁶), it is suggested that the switch-off regulation of replication (by an inhibitor), incompatibility, and copy number control are governed by the same gene.     

Isolation and characterization of lambda phages carrying the basic replicon of the resistance plasmid R1

Summary Specialized transducing lambda phages, oriR1, harboring DNA from the resistance plasmid R1drd-19 and its copy mutant pKN103 were isolated. From measurements of CCC-DNA content it is concluded that upon infection the phages can establish themselves as self-replicating plasmids in recA hosts lysogenic for lambda. It is thought that this bypassing of lambda immunity is due to the presence of the R1 origin of replication. The plasmids are sensitive to the incompatibility expressed by plasmid R1. This has been shown mainly by transduction of oriR1 into recipients containing R1 plasmids or plasmid pBR322 carrying the basic replicon. We were able to demonstrate that a copy mutant of plasmid R1 was insensitive to copA ⁺, but sensitive to the conserted action of Pst1 fragments F₁ and F₂. This mutant was previously assumed to be of the dominant type. Physical mapping of the oriR1 derivatives verified that they carry the basic replicon of plasmid R1. The plasmids are not stably maintained, but are lost in a frequency of 1%–2% per cell generation, which is consistent with their lack of the R1par region.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Escherichia coli PriA protein is essential for inducible and constitutive stable DNA replication.

Under certain conditions, Escherichia coli cells exhibit either of two altered modes of chromosomal DNA replication. These are inducible stable DNA replication (iSDR), seen in SOS-induced cells, and constitutive stable DNA replication (cSDR), seen in rnhA mutants. Both iSDR and cSDR can continue to occur in the absence of protein synthesis. They are dependent on RecA protein, but do not require DnaA protein or the oriC site. Here we report the requirement for PriA, a protein essential for assembly of the phi X174-type primosome, for both iSDR and cSDR. In priA1(Null)::kan mutant cells, iSDR is not observed after induction by thymine starvation. Replication from one of the origins (oriM1) specific to iSDR is greatly reduced by the priA1::kan mutation. cSDR in rnhA224 mutant cells deficient in RNase HI is also completely abolished by the same priA mutation. In both cases, SDR is restored by introduction of a plasmid carrying a wild-type priA gene. Furthermore, the viability of an rnhA::cat dnaA46 strain is lost at 42 degrees C upon inactivation of the priA gene, indicating the lethal effect of priA inactivation on those cells whose viability depends on cSDR. These results demonstrate that a function of PriA protein is essential for iSDR and cSDR and suggest the involvement of the PriA-dependent phi X174-type primosome in these DnaA/oriC-independent pathways of chromosome replication. Whereas ColE1-type plasmids, known to be independent of DnaA, absolutely require PriA function for replication, DnaA-dependent plasmid replicons such as pSC101, F, R6K, Rts1 and RK2 are able to transform and to be maintained in the priA1::kan strain.(ABSTRACT TRUNCATED AT 250 WORDS)     

A DNA polymerase mutation that suppresses the segregation bias of an ARS plasmid in Saccharomyces cerevisiae.

Yeast autonomously replicating sequence (ARS) plasmids exhibit an unusual segregation pattern during mitosis. While the nucleus divides equally into mother and daughter cells, all copies of the ARS plasmid will often remain in the mother cell. A screen was designed to isolate mutations that suppress this segregation bias. A plasmid with a weak ARS (wARS) that displayed an extremely high segregation bias was constructed. When cells were grown under selection for the wARS plasmid, the resulting colonies grew slowly and had abnormal morphology. A spontaneous recessive mutation that restored normal colony morphology was identified. This mutation suppressed plasmid segregation bias, as indicated by the increased stability of the wARS plasmid in the mutant cells even though the plasmid was present at a lower copy number. An ARS1 plasmid was also more stable in mutant cells than in wild-type cells. The wild-type allele for this mutant gene was cloned and identified as POL delta (CDC2). This gene encodes DNA polymerase delta, which is essential for DNA replication. These results indicate that DNA polymerase delta plays some role in causing the segregation bias of ARS plasmids.