CCSD主孔100-2950m榴辉岩类和片麻岩类叶理及微断层产状特征

CCSD主孔100~2950m榴辉岩、退变榴辉岩类岩石叶理倾角明显较片麻岩类岩石叶理倾角陡,前者总体倾角55°左右,后者28°左右,局部可见片麻岩类叶理切割榴辉岩类叶理,因此两者叶理可能形成于不同时期;两类岩石之间现部分为韧性剪切带接触关系,韧性剪切带形成于苏鲁地体折返主期自SEE向NWW的韧性剪切作用。榴辉岩、退变榴辉岩类岩石叶理产状对发育于该类岩石内的微断层产状有一定控制作用,而片麻岩类岩石叶理产状对发育于该类岩石内的微断层产状控制作用相对较弱。孔区脆性变形主要反映白垩纪以来SEE-NWW向伸展构造应力场的变形特征,主孔100~1620m倾伏向以SEE向占绝对优势的微正滑断层擦痕即为该期变形的产物。     

江苏东海CCSD主孔超高压变形与折返变形的叠加关系

位于苏鲁超高压变质地体南部的中国大陆科学钻探工程（CCSD）主孔岩石经历了超高压变形及多期折返变形。第一期折返变形为伸展折返变形,榴辉岩发生角闪岩相退变质作用,没有新生面理或线理的发育,基本保留了超高压阶段的S-L组构,并有显示熔融体特征的强退变榴辉岩发育。第二期折返变形为SEE-NWW向挤压折返变形,超高压变形期形成的不同岩石类型在本期变形中表现出不同的叠加变形现象,榴辉岩类岩石早期形成的S倾面理主体部分转为SEE倾,但拉伸线理产状与超高压变形期的近SN走向基本一致,反映早期面理沿NNE轴向的重褶作用,局部又被向SEE缓倾的韧性剪切带切割;而片麻岩类岩石在超高压变形期形成的S-L组构的主体部分已被新生成的总体向SEE缓倾的S-L组构置换,反映早期面理不仅重褶,而且大部分再度发生韧性剪切变形,具SEE向NWW的逆冲剪切指向,矿物普遍重新定向。第三期折返变形发育具NWW向SEE正滑剪切指向的韧性剪切带,并伴随大量“Z”型褶皱构造的发育。第四期折返变形以NWW向SEE正滑的张性或张扭性脆性断裂活动为主。探讨了苏鲁超高压变质地体折返变形的力学机制及CCSD主孔岩石面理变化的形成机制。     

大别山超高压变质岩的变形特征及其地质意义

大别山超高压变质岩至少经过５期变形。第１期产生于榴辉岩相变质前；第２期大致与榴辉岩相变质作用同步．岩石产生紧密同斜褶皱及榴辉岩相糜棱岩；第３期产生于超高压变质岩向中地壳折返的过程中，以榴辉岩的布丁化及基质的透入性剪切为特征；第４期主要形成剪切条带及伸展沿劈理．是大别山碰撞后差异隆升，岩层向南滑脱的结果；最后一期为脆性变形，岩层沿北东向断层产生左行平移。通过超高压变质岩的变形分析，可以了解超高压变质岩形成和折返的构造运动过程。     

江苏东海CCSD主孔超高压变形与折返变形的叠加关系

1 超高压变形期 形成榴辉岩及榴辉岩相韧性剪切带,面理化榴辉岩内面理向南陡倾,倾角平均55°(图1),拉伸线理近南北走向.     

剪切指向转换的韧性剪切带——中国大陆科学钻探工程(CCSD)主孔中韧性剪切带(深度2010～2145m)的EBSD特征及运动学研究

位于苏鲁超高压变质地体南部的中国大陆科学钻探工程(CCSD)主孔深度1596～2038m的榴辉岩段和2038～2500m的片麻岩段之间存在一条厚一百余米的韧性剪切带(深度2010～2145m)。韧性剪切带由糜棱岩化退变榴辉岩、花岗质糜棱岩等强应变岩石组成,韧性剪切带的面理倾向SEE,倾角由上部平均52°向中、下部平均32°转变,拉伸线理产状与面理倾向近一致,是220～200Ma期间折返应变的产物。糜棱岩化退变榴辉岩和花岗质糜棱岩的显微构造与石英晶格优选方位显示了折返阶段早期自SEE向NWW逆冲剪切指向以及后期自NWW向SEE正滑剪切指向转化的应变行为。CCSD主孔2010～2145m韧性剪切带的形成与它位于以榴辉岩为主的岩性-构造单元与其下以片麻岩为主的岩性-构造单元的界线附近有密切联系。第一期超高压阶段南北向韧性剪切作用形成的叶理、拉伸线理产状及相关的岩石类型与第二期、第三期阶段SEE- NWW向折返变形明显不同。     

恒山中段新太古代高压麻粒岩区的构造特征

恒山中段高压麻粒岩区是华北克拉通新太古代高压麻粒岩最好的露头区之一，北部为强烈重熔的灰色片麻岩区，构造样式以穹窿、近水平韧性剪切带为主，中部以近东西向的右旋走滑剪切带与南部变形变质程度相对较低的岩石单元相接，后者主要的岩石类型为均匀的英云闪长质片麻岩和变质辉绿岩墙。高压麻粒岩以透镜体形式出现在北部。本文通过对恒山高压麻粒岩区构造特征和构造样式的分析，认为高压麻粒岩区主要经历了4期构造变形：①高压麻粒岩透镜体里的逆冲型韧性剪切变形和走滑剪切变形；②向南或南西的伸展变形；③右行走滑剪切；④向东或南东伸展变形。对恒山地区的高压麻粒岩的出露起决定作用的是两次伸展构造运动。     

瑞士中阿尔卑斯地区Tambo推覆体的基底一盖层间关系：几何学、构造学和运动学特征

在中阿尔卑斯Ｐｅｎｎｉｎｅ带中，Ｔａｍｂｏ推覆体形成薄的、嵌埋于中生代盖层中的结晶岩片。发现第三纪有四期阿尔卑斯式变形。Ｄ＿１韧性变形与始新世推覆体向北西方向递进推叠作用有关。Ｄ＿１期间，基底变形受叠瓦状构造影响，而盖层是薄片状的，并且被强烈褶皱。这些不同的构造反映了基底和盖层间最初为强烈流动的接触关系。在Ｄ＿２非均匀和韧性变形期间，基底和盖层的特性变得相似。Ｄ＿２强烈的垂直缩短作用，伴有“顶向东”剪切，导致先前ＳＥ倾的构造面发生褶皱作用，发育了褶皱轴及Ｌ＿２拉伸线理近Ｅ—Ｗ向而轴面向ＳＥ倾的褶皱。Ｄ＿１，变形期间地壳加厚之后，Ｄ＿２变形对应于碰撞后的地壳变薄作用。Ｄ＿３和Ｄ＿４变形发生于退变质条件下，分别与Ｉｎｓｕｂｒｉｃ线的上升和后期的右旋运动有关。     

内蒙古大青山高级变质岩韧性剪切带及其流变机制

大青山高级变质岩不仅记录华北克拉通早期大陆形成演化历史,也保留了中下部地壳岩石流变信息,它们经历了下部地壳构造层次高角闪岩相-麻粒岩相条件变质变形、深熔作用改造,形成了复杂构造样式和构造要素组合.韧性剪切带是高级变质岩中主要构造形迹,控制着早前寒武纪高级变质岩主体构造格架.依据野外地质产状、变形特征与构造要素叠加改造关系,韧性剪切带划分为早期近水平顺层伸展型和晚期陡倾韧性剪切带.近水平顺层伸展韧性剪切带呈残留状保留在后期变形改造较弱部位上,主要沿着不同地质单元或者岩性层界面上发育,是在伸展变形体制下形成的.晚期陡倾韧性剪切带呈近东西方向展布,规模较大,叠加和改造早期构造形迹,形成于晚期造山挤压构造环境中,以左行滑移为主.这两种韧性剪切带都形成于地壳中深部构造层次高角闪岩相-麻粒岩相条件下,变形机制主要为熔体增强颗粒边界扩散和颗粒流动,使岩石发生大规模的塑性流动.在宏观上形成了不对称流动组构、条纹条带构造、熔融线理、层内流动褶皱等构造形迹,在微观上矿物晶体没有发生明显塑性变形,均匀消光,晶体为三边平衡结构,与静态变质结构相似,形成了地壳深部构造层次上变质构造岩-构造片麻岩.      

鲁西地区韧性剪切带岩石磁组构分析及其构造意义

岩石磁组构分析可用来研究岩石的组构特征及构造变形。鲁西地区韧性剪切带岩石磁组构具有磁各异性度Ｐ和磁百分率各向异性值Ｈ高、磁化率量值椭球呈压扁状、磁面理发育而磁线理不发育的特点。区内韧性剪切带变形强烈,以压扁作用为主,最大主压应力方向近ＮＥ和Ｓ－Ｎ向,以右旋运动为主。韧性剪切带形成以后,区内主要经历了热蚀变和脆性变形,韧性变形很弱     

鲁西地区韧性剪切带岩磁组构分析及其构造意义

岩石磁组构分析了可用来研究岩石的组构特征及构造变形。鲁西地区韧性剪切带岩石磁组构具有磁各异性度Ｐ和磁百分率各向异性值Ｈ高、磁化率量值椭球呈压扁状、磁面理发育而磁线理不发育的特点。区内韧性剪切带变形强烈,以压扁作用为主,最大主压应力方向近ＮＥ和Ｓ－Ｎ向,以右旋运动为主。韧性剪切带形成以后,区内主要经历了热蚀变和脆性变形,韧性变形很弱。     

Evolution of Caledonian deformation fabrics under eclogite and amphibolite facies at Vårdalsneset, Western Gneiss Region, Norway

The Vårdalsneset eclogite situated in the Western Gneiss Region, SW Norway, is a well preserved tectonite giving information about the deformation regimes active in the lower crust during crustal thickening and subsequent exhumation. The eclogite constitutes layers and lenses variably retrograded to amphibolite and is composed of garnet and omphacite with varying amounts of barroisite, actinolite, clinozoisite, kyanite, quartz, paragonite, phengite and rutile. The rocks record a five‐stage evolution connected to Caledonian burial and subsequent exhumation. (1) A prograde evolution through amphibolite facies (T =490±63 °C) is inferred from garnet cores with amphibole inclusions and bell‐shaped Mn profile. (2) Formation of L>S‐tectonite eclogite (T =680±20 °C, P=16±2 kbar) related to the subduction of continental crust during the Caledonian orogeny. Lack of asymmetrical fabrics and orientation of eclogite facies extensional veins indicate that the deformation regime during formation of the L>S fabric was coaxial. (3) Formation of sub‐horizontal eclogite facies foliation in which the finite stretching direction had changed by approximately 90°. Disruption of eclogite lenses and layers between symmetric shear zones characterizes the dominantly coaxial deformation regime of stage 3. Locally occurring mylonitic eclogites (T =690±20 °C, P=15±1.5 kbar) with top‐W kinematics may indicate, however, that non‐coaxial deformation was also active at eclogite facies conditions. (4) Development of a widespread regional amphibolite facies foliation (T =564±44 °C, P<10.3–8.1 kbar), quartz veins and development of conjugate shear zones indicate that coaxial vertical shortening and sub‐horizontal stretching were active during exhumation from eclogite to amphibolite facies conditions. (5) Amphibolite facies mylonites mainly formed under non‐coaxial top‐W movement are related to large‐scale movement on the extensional detachments active during the late‐orogenic extension of the Caledonides. The structural and metamorphic evolution of the Vårdalsneset eclogite and related areas support the exhumation model, including an extensional detachment in the upper crust and overall coaxial deformation in the lower crust.     

AMS record of brittle dilation,viscous-stretching and gravity-driven magma ascent in area of magma-rich crustal extension (Vosges Mts., NE France)

Orogenic compression-related fabrics (~340–335 Ma) were reworked during regional extensional deformation (~328–325 Ma) in a large anatectic crustal domain of the Central Vosges (NE France). The extension was first accommodated by brittle dilation affecting vertically anisotropic high-grade rocks associated with emplacement of subvertical granitic sheets. The AMS fabric of granitoids is consistent with highly partitioned transtensional deformation marked by alternations of flat and steep foliations and development of orthogonal lineations. This deformation passes to top-to-the-southwest ductile shearing expressed in southerly migmatitic middle crust. The AMS fabric revealed moderately west-dipping foliations bearing subhorizontal NNW–SSE-trending lineations and predominantly plane strain to prolate shapes. This fabric pattern is interpreted as a viscous response of stretched partially molten crust during continuous ductile extension. Vertical ascent of voluminous granites and stoping of the upper crust occurs further south. This gravity ascent triggered by extension leads to development of south-dipping AMS foliations, south-plunging lineations and oblate fabrics in various crustal granites. Vertical shortening related to ascent of these (~325 Ma) granitoids and persistent N–S stretching is responsible for reworking and remelting of originally vertical compression-related fabric in roof supracrustal granites (~340 Ma) and development of highly prolate fabrics in these rocks. This work shows that the finite shape of AMS fabric ellipsoid is highly sensitive to both strain regime and superpositions of orthogonal deformation events.     

大别-苏鲁超高压和高压变质带构造演化

大别—苏鲁是世界上超高压 (UHP) ( >2 .7GPa)和高压 (HP)变质岩石出露最为广泛的地区。通过区域研究 ,尤其是在选择的 30多个关键位置上不同尺度构造记录的深入观察 ,结合已有的可利用的变质、热事件及同位素年代学资料分析 ,揭示出它们曾遭受过一个复杂的从深俯冲到折返构造演化历程 ,识别出 5个主要的构造变质事件 :( 1)由块状榴辉岩中发育的微弱面理和线理所代表的第 1期变形变质事件 (D1) ;( 2 )面状榴辉岩中发育的含拉伸线理的透入性主面理、中小型鞘状褶皱及网络状韧性剪切带 ,代表第 2期构造变质事件 (D2 ) ;( 3)第 3期变形事件主体发生于麻粒岩 /角闪岩相后成合晶形成之后 ,主要构造记录是区域性陡倾斜面理及不均一置换的成分层、榴辉岩透镜体及布丁群、面理内褶皱、网状韧性剪切带系统以及减压部分熔融作用形成的混合岩和含榴花岗质岩石组构 ;( 4)区域性的碰撞期后地壳韧性薄化及剪张作用 (D4)形成缓倾斜角闪岩相主面理及线理、穹状及弧形构造和多层韧性拆离带 ,它们主导了现今观察到的大别—苏鲁超高压和高压变质带的区域构造几何图像 ;( 5 )第 5期构造热事件 (D5)表现为不均一断块抬升、红色沉积盆地发育及大规模的岩体和岩脉就位 ,代表造山晚期的构造揭顶及坍陷作用 ,该期构造控制着造山带     

Triassic Collisional Structures and Post—Collisional Deformation of Bixiling UHP Rock Stack： Insights for Tectonic Evolution of UHP Metamorphic Belt in Dabie Massif, Central China

Detailed three-dimensional structural studies indicate that the Bixiling area,Dabie massif,central Chian shows the deepest exposed levels of the orogenic wedge formed during the Triassic Yangtze0Sino-Korean continental collision.New1:10000 scale structural mapping,combined with detailed petrological analysis in this area,has enabled us to accurately distinguish structures related to the Trias-sic continental collision from those related to post-collisional deformation in the ultrahigh pressure (UHP) metamorphic unit.The collisional or compressional structures include the massive eclogite with a weak foliation,foliated eclogite or UHP ductile shear zones,as well as upper amphibolite facies shear zones,whereas the post-collisional deformation is characterized by a regionally,flat-lying foliation con-taining stretching lineations and common reclined folds .The former is present exclusively in the eclogite lenses and their margins,representing orogenic thickening or syn-collisional events,while the latter was best occurred on variable scales under amphibolite facies conditions,showing sub-vertical,extreme short-ening and ductile thinning of the metamorphic rock stack.The eclogite facies tectonites that have a marked fabric discordance to the penetrative amphibolite facies extension flow fabric are common.It is emphasized that an extensional tectonic setting following the collision-orogenic thickening stage was,at least partly,responsible for exhumation of the UHP metamorphic rocks in the Dabie massif.A new tec-tionic evolution model is proposed for the UHP metamorphic belt on the scale of the Dabie massif.The Bixiling area thus provides a window,from which the dynamic processes concerning the formation and exhumation of the UHP rocks can be observed.Regional studies in the Dabie Mountains have confirmed this interpretation.     

Compressional origin of the Aegean Orogeny,Greece

The Aegean Sea area is thought to be an actively extending back-arc region, north of the present day Hellenic volcanic arc and north-dipping subduction zone in the Eastern Mediterranean. The area shows extensive normal faulting, ductile ‘extensional’ shear zones and extensional S-C fabrics throughout the islands that have previously been related to regional Aegean extension associated with slab rollback on the Hellenic Subduction Zone. In this paper, we question this interpretation, and suggest the Cenozoic geodynamic evolution of the Aegean region is associated with a Late Cretaceous–Eocene NE-dipping subduction zone that was responsible for continent-continent collision between Eurasia and Adria-Apulia/Cyclades. Exhumation of eclogite and blueschist facies rocks in the Cyclades and kyanite-sillimanite grade gneisses in the Naxos core complex have pressures that are far greater than could be accounted for purely by lithospheric extension and isostatic uplift. We identify four stages of crustal shortening that affected the region prior to regional lithospheric extension, herein called the Aegean Orogeny. This orogeny followed a classic Wilson cycle from early ophiolite obduction (ca. 74 Ma) onto a previously passive continental margin, to attempted crustal subduction with HP eclogite and blueschist facies metamorphism (ca. 54–45 ?Ma), through crustal thickening and regional kyanite – sillimanite grade Barrovian-type metamorphism (ca. 22–14 ?Ma), to orogenic collapse (<14 ?Ma). At least three periods of ‘extensional’ fabrics relate to: (1) Exhumation of blueschists and eclogite facies rocks showing tight-isoclinal folds and top-NE, base-SW fabrics, recording return flow along a subduction channel in a compressional tectonic setting (ca. 50–35 ?Ma). (2) Extensional fabrics within the core complexes formed by exhumation of kyanite- and sillimanite gneisses showing thrust-related fabrics at the base and ‘extensional’ fabrics along the top (ca. 18.5–14 ?Ma). (3) Regional ductile-brittle ‘extensional’ fabrics and low-angle normal faulting related to the North Cycladic Detachment (NCD) and the South(West) Cycladic Detachment (WCD) during regional extension along the flanks of a major NW–SE anticlinal fold along the middle of the Cyclades. Major low-angle normal faults and ductile shear zones show symmetry about the area, with the NE chain of islands (Andros, Tinos, Mykonos, Ikaria) exposing the NE-dipping NCD with consistent top-NE ductile fabrics along 200 ?km of strike. In contrast, from the Greek mainland (Attica) along the SE chain of islands (Kea, Kythnos, Serifos) a SW-dipping low-angle normal fault and ductile shear zone, the WCD is inferred for at least 100 ?km along strike. Islands in the middle of the Cyclades show deeper structural levels including kyanite- and sillimanite-grade metamorphic core complexes (Naxos, Paros) as well as Variscan basement rocks (Naxos, Ios). The overall structure is an ~100 ?km wavelength NW–SE trending dome with low-angle extensional faults along each flank, dipping away from the anticline axis to the NE and SW. Many individual islands show post-extensional large-scale folding of the low-angle normal faults around the domes (Naxos, Paros, Ios, Sifnos) indicating a post-Miocene late phase of E–W shortening.     

剥离断层、板块内近水平的剪切带与伸展构造

地壳的水平伸展作用是形成大陆板块内部断陷盆地的重要因素.在山区的基底岩石中,这种伸展在上部层次表现为一系列低角度的剥离断层;在中深部层次表现为近水平的韧性剪切带。本文中阐明了它们的鉴别特征.据此,在北京西山新生代以前的地层中,已发现了多期的伸展与挤压作用交替所造成的复杂的构造.     

Superposition of extensional detachments during the Neogene in the internal zones of the Betic cordilleras

 In the internal zones of the Betic cordilleras, extensional structures have developed from the Upper Oligocene to the present day; they are contemporaneous with compressional structures (folds and thrusts) in the external zones. From the Upper Oligocene to the Aquitanian, extension occurred in the Maláguide/Alpujárride detachment, and related structures show varying kinematics in different sectors. Younger deformations with a top-to-the-N sense of movement have affected Nevado-Filábride (ductile shear zones), Alpujárride (ductile and brittle shear zones) and Maláguide rocks (normal faults). At least from the Late Burdigalian up to the Lower Tortonian, displacements have occurred in the Alpujárride/Nevado-Filábride detachment. Deformations have been generally non-coaxial, with a top-to-the-W sense of movement. Stretching lineation trends in the Nevado-Filábride rocks curve from E to W suggesting a progressive variation of the ductile-shear-zone kinematics related to the Alpujárride/Nevado-Filábride detachment between the Aquitanian and Lower Tortonian stages. Deformations from the Lower Tortonian to the present day are normal faults, formed in extensional settings in the upper part of the crust, and folds and strike-slip faults which indicate N–S to NNW–SSE shortening directions and E–W to ENE–WSW extension directions. Received: 26 December 1995 / Accepted: 26 January 1996     

贺兰山北段古元古代结晶基底变形特征及其区域构造意义

贺兰山北段结晶基底中保留有不同程度的韧性变形剪切带.通过详细的野外考察和室内显微构造研究,明确贺兰山北段的古元古代基底经历了4期韧性剪切变形:(1)早期顺层剪切带表现出中下部地壳层次的变形样式,运动学特征一致反映了近南北向的伸展;(2)麻粒岩相变质的糜棱片麻岩剪切带为南北向挤压的产物,导致经历高温高压变质的孔兹岩系从下地壳向中部地壳抬升;(3)高级糜棱岩(低角闪岩相-高绿片岩相)剪切带涉及的2次伸展运动(北西-南东向伸展和北东-南西向伸展)使得基底进一步向中部地壳抬升,可能发生在形成孔兹岩系的同一造山运动的晚期伸展垮塌过程中;(4)北东-近东西向左行逆冲绿片岩相糜棱岩剪切带则将结晶基底抬升到中上部地壳层次,其运动学特征与高级糜棱岩剪切带明显不同,可能是另一造山运动的产物.贺兰山北段与大青山-乌拉山地区有相似的韧性剪切带和构造变形,表明华北克拉通西部北缘存在一致的近东西走向的古元古代碰撞造山运动以及随后另一造山运动的改造.     

胶东半岛乳山地区低角度韧性剪切带几何学、运动学特征:对中国东部岩石圈减薄作用的启示

大规模伸展构造是华北克拉通东部岩石圈减薄的重要表现形式。部分低角度韧性剪切带是地壳伸展变形后所展现的构造形式。本文研究了王格庄韧性剪切带的岩石学、几何学、运动学等特征显示:韧性剪切带走向近南北向,剪切带断层面倾向多变(倾向西、西南、西北方向)。大部分区域面理低角度倾向西,矿物拉伸线理近东西向,不对称旋转碎斑及S-C组构指示顶端指向西的剪切特征。结合研究区西侧与伸展构造相匹配的半地堑伸展盆地证据:本研究认为伸展构造的形成可能与西太平洋板块的后撤相关,即大规模伸展构造作用引发了华北克拉通东部的地壳减薄作用。     

大别山超高压变质岩的变形历史及折返过程

大别山南部的超高压变质岩在其形成及折返过程中经过5期变形。D₁变形为榴辉岩相前变形,形成于扬子板块北缘陆壳基底的俯冲过程中;D₂变形形成于折返初期(220-210Ma)即超高压变质岩在浮力驱动下折返至下地壳底部的过程中,变形以块状榴辉岩的糜棱岩化及层状榴辉岩和基质的紧密-同斜褶皱为特征;D₃变形发生在折返中期(200-180Ma)即超高压变质岩在南北陆块持续碰撞作用下被挤出并向北逆冲折返至中地壳的过程中,变形以榴辉岩的布丁化和基质的强烈韧性剪切变形为特征;D₄变形是折返晚期(130-110Ma)超高压变质岩在地壳浅部伸展体制下向南滑脱所致;在折返至近地表时,超高压变质岩受到NE向断层(D₅)的切割。