Static fatigue fracture of polyethylene: A morphological analysis

The fracture properties of a number of high-density polyethylenes were evaluated and related to their morphology. The resistance to initiation of fracture is related to the resistance to voiding of the materials and the rate of coalescence of voids. The propensity of the materials to void has been shown to be related to the size of the amorphous region. The resistance to propagation of the fracture is also related to the above factors as well as the ease of stretching and rupture of fibrils. The ease of fibril formation has been shown to be related to the degree of perfection of the crystallites.     

成都经济生态区大气降尘中镉赋存形态的研究

采用Tessier连续提取法对成都经济生态区不同区域的24个大气降尘样中镉的赋存形态进行了研究。研究结果表明,大气降尘中的镉主要以残留态形态存在;各形态镉在总镉中所占百分比含量由大到小排列顺序依次是:残留态,碳酸盐结合态,交换态,铁锰结合态,有机结合态;交换态镉、碳酸盐结合态镉这两种具有较高生物有效性的形态镉在总镉中所占的平均百分比含量分别是6.420%和8.917%;铁锰氧化物结合态、有机结合态、残留态镉这三种形态镉生物有效性很低,分别在总镉中所占的平均百分比含量分别是3.419%、2.365%和78.907%。通过分析可得出,汽油和煤的燃烧以及工厂排放镉能加大城市大气降尘的镉污染。     

Hybridized particle swarm algorithm for adaptive structure training of multilayer feed-forward neural network: QSAR studies of bioactivity of organic compounds

The multilayer feed-forward ANN is an important modeling technique used in QSAR studying. The training of ANN is usually carried out only to optimize the weights of the neural network and without paying attention to the network topology. Some other strategies used to train ANN are, first, to discover an optimum structure of the network, and then to find weights for an already defined structure. These methods tend to converge to local optima, and may also lead to overfitting. In this article, a hybridized particle swarm optimization (PSO) approach was applied to the neural network structure training (HPSONN). The continuous version of PSO was used for the weight training of ANN, and the modified discrete PSO was applied to find appropriate the network architecture. The network structure and connectivity are trained simultaneously. The two versions of PSO can jointly search the global optimal ANN architecture and weights. A new objective function is formulated to determine the appropriate network architecture and optimum value of the weights. The proposed HPSONN algorithm was used to predict carcinogenic potency of aromatic amines and biological activity of a series of distamycin and distamycin-like derivatives. The results were compared to those obtained by PSO and GA training in which the network architecture was kept fixed. The comparison demonstrated that the HPSONN is a useful tool for training ANN, which converges quickly towards the optimal position, and can avoid overfitting in some extent.     

Dosimetric and spectroradiometric investigations of glass filtered solar UV

The aims of this paper were to investigate how glass-filtered UV irradiances vary with glass thickness, lamination of the glass and the effect of solar zenith angle (SZA), and to measure the glass-filtered UV exposures to different receiving planes with a newly developed UVA dosimeter. Spectroradiometric and dosimetric techniques were employed in the experimental approach. The percentage of the glass-filtered solar UV compared to the unfiltered UV ranged from 59% to 70% and was influenced to a small extent by the glass thickness and the SZA. The laminated glass transmitted 11 to 12% and the windscreen glass transmitted 2.5-2.6%. The influence of the SZA was less for the thicker glass than it was for the thinner glass. The change in transmission was less than 14% for the SZA between 48 degrees and 71 degrees. There was negligible influence due to the SZA on the glass-transmitted UV of the laminated and windscreen glass. The influence of the glass thickness in the range of 2-6 mm on the percentage transmission was less than 16%. The influences of the glass thickness and the SZA on the glass-transmitted UV have been incorporated in the use of a UVA dosimeter for the glass-transmitted UV exposures. The UVA dosimeter was employed in the field to measure the glass-filtered UV exposures to different receiving planes. The UVA dosimeter reported has the potential for personal solar UVA exposure measurements.     

Study on the Formation Mechanism of Oxygen-containing Groups on the Surfaces of Hypercrosslinked Polystyrenes

Davankov and Tsyurupa described a new series of hypercrosslinked polymeric networks in 19691. Owing to their high internal surface area, unique porosity, and excellent swelling feature, hypercrosslinked polymers have exhibited a good adsorption affinity t…     

Explicit finite difference simulations for accelerating cross diffusion flow over a perpendicular shield with parabolic motion

The heat transfer phenomenon subject to thermos-diffusion effects convey important applications in the heating processes, extrusion systems, chemical processes and various engineering systems. The objective of current work is to observe the contribution of Soret and Dufour effects in oscillating shield for cross diffusion flow. The perpendicular shield with oscillating motion induced the flow. The magnitude of oscillations is assumed to be small so that laminar flow due to oscillating shield has been resulted. The motivations for addressing the thermos-diffusion phenomenon due to oscillating of shield are due to applications in oscillatory pumps, moving surface, metal detectors, power systems etc. The dimensionless problem is obtained via introducing the appropriate set of variables. The numerical outcomes are suggested by using the most interesting explicit finite difference scheme. The physical illustration for flow parameters is presented. Moreover, the aspect of physical quantities involving the flow are graphically reported.     

铜基催化剂的制备方法对草酸二乙酯加氢反应的影响

草酸二乙酯加氢性成乙二醇的反应过程中，所用的铜基催化剂是由Ｃｕ（ＮＯ３）２与硅溶胶凝法制得的。本文考察了该催化剂的ＴＰＲ特性，结果表明，随着催化剂中Ｃｕ／ＳｉＯ２值的增大，其ＴＰＲ主峰ＴＭ峰温有所升高，这意味着催化剂的还原温度随Ｃｕ／ＳｉＯ２值的增大而提高。用ＸＲＤ和ＸＰＳ等手段对该催化剂还原后铜的含量及价态进行了考察，表明用胶凝法制备的铜基催化剂，还原后存在Ｃｕ＾ｏ和Ｃｕ＾＋两种价态。结合活性评     

Monte Carlo simulations of a coarse grained model for an athermal all-polystyrene nanocomposite system

The structure of a polystyrene matrix filled with tightly cross-linked polystyrene nanoparticles, forming an athermal nanocomposite system, is investigated by means of a Monte Carlo sampling formalism. The polymer chains are represented as random walks and the system is described through a coarse grained Hamiltonian. This approach is related to self-consistent-field theory but does not invoke a saddle point approximation and is suitable for treating large three-dimensional systems. The local structure of the polymer matrix in the vicinity of the nanoparticles is found to be different in many ways from that of the corresponding bulk, both at the segment and the chain level. The local polymer density profile near to the particle displays a maximum and the bonds develop considerable orientation parallel to the nanoparticle surface. The depletion layer thickness is also analyzed. The chains orient with their longest dimension parallel to the surface of the particles. Their intrinsic shape, as characterized by spans and principal moments of inertia, is found to be a strong function of position relative to the interface. The dispersion of many nanoparticles in the polymeric matrix leads to extension of the chains when their size is similar to the radius of the dispersed particles.     

DataCite and DOI names for research data

The publication of research data is still not a widespread practice in many disciplines. The lack of acceptance of data as scientific output equal to scientific articles, and the lack of suitable infrastructures for the storage of data make it difficult to publish and cite data independently. The global consortium DataCite was established in 2009 to overcome the challenges of data citation. The aim of the consortium is to establish easy access to data, to increase the acceptance of data publication and to support data archiving. The use of Digital Object Identifiers (DOI) provides an easy method to access and re-use research data. The DOI facilitates the citation of data and therefore increases the availability and acknowledgement of research data.     

Experimental investigation of contact angle, curvature, and contact line motion in dropwise condensation and evaporation

Image-analyzing interferometry is used to measure the apparent contact angle and the curvature of a drop and a meniscus during condensation and evaporation processes in a constrained vapor bubble (CVB) cell. The apparent contact angle is found to be a function of the interfacial mass flux. The interfacial velocity for the drop during condensation and evaporation is a function of the apparent contact angle and the rate of change of radius of curvature. The dependence of velocity on the apparent contact angle is consistent with Tanner's scaling equation. The results support the hypothesis that evaporation/condensation is an important factor in contact line motion. The main purpose of this article is to present the experimental technique and the data. The equilibrium contact angle for the drop is found experimentally to be higher than that for the corner meniscus. The contact angle is a function of the stress field in the fluid. The equilibrium contact angle is related to the thickness of the thin adsorbed film in the microscopic region and depends on the characteristics of the microscopic region. The excess interfacial free energy and temperature jump were used to calculate the equilibrium thickness of the thin adsorbed film in the microscopic region.     

Catalytic carbophilic activation: catalysis by platinum and gold pi acids

The ability of platinum and gold catalysts to effect powerful atom-economic transformations has led to a marked increase in their utilization. The quite remarkable correlation of their catalytic behavior with the available structural data, coordination chemistry, and organometallic reactivity patterns, including relativistic effects, allows the underlying principles of catalytic carbophilic activation by pi acids to be formulated. The spectrum of reactivity extends beyond their utility as catalytic and benign alternatives to conventional stoichiometric pi acids. The resulting reactivity profile allows this entire field of catalysis to be rationalized, and brings together the apparently disparate electrophilic metal carbene and nonclassical carbocation explanations. The advances in coupling, cycloisomerization, and structural reorganization--from the design of new transformations to the improvement to known reactions--are highlighted in this Review. The application of platinum- and gold-catalyzed transformations in natural product synthesis is also discussed.     

Interaction between polyethylene films and bromhexine HCl in solid dosage form. IV. Prevention of the sorption by addition of magnesium aluminum silicate.

The effects of magnesium aluminum silicate (MAS) addition on the sorption of bromhexine HCl to polyethylene film in tablets were studied. The addition of MAS prevented the sorption of bromhexine HCl to polyethylene film. In order to investigate the mechanism, the interaction between bromhexine HCl and MAS was studied by the powder X-ray diffraction method. It was observed that bromhexine HCl was preferentially adsorbed to the surface of MAS rather than to polyethylene film. The adsorption was accelerated at high temperature and reduced pressure conditions. The sorption of bromhexine base and bromhexine HCl to packaging material were compared using tablet dosage forms. The sorption of bromhexine base to polyethylene film was greater than that of bromhexine HCl.     

Electrochemistry of the bis(1,4,7-triazacyclodecane) cobalt(III) complex and its role in the catalytic reduction of hydrogen

The electrochemistry of the bis(1,4,7-triazacyclodecane) cobalt(III) complex at a mercury electrode, HMDE, in aqueous Britton–Robinson buffer solutions was investigated using cyclic voltammetry, double-potential-step chronoamperometry and chronocoulometry. The cyclic voltammetric data were analyzed by digital simulation to confirm and to measure the heterogeneous and homogeneous parameters for the suggested electrode mechanism. Generally, the complex is electrochemically reduced giving rise to two cyclic voltammetric waves. The first wave is a diffusion-controlled reversible wave. It is assigned to the stable Co(III)/Co(II) redox couple. The second one is found to be irreversible and corresponding to a reduction of Co(II) to Co(I) species. The monovalent cobalt, highly unstable, is rapidly protonated, and then forms cobalt hydride. The hydride decomposes to hydrogen molecules and regenerates Co(II) species following a disproportionation pathway. The overall reduction mechanism is concluded to be an EECC kinetics.     

Studies of the Rate Constant of l-DOPA Oxidation and Decarboxylation by HPLC

The objective of current investigation was to study the degradation behavior of l-DOPA under different conditions by high performance liquid chromatography (HPLC), and to develop and validate a stability-indicating HPLC method. The developed RP-HPLC method was validated with respect to linearity, accuracy, precision and specificity. Oxidation was found to occur in alkaline and to some extent in thermal conditions, while the drug was stable when incubated at acidic conditions and under photolytic stress. The oxidation of l-DOPA was observed to follow first-order kinetics. The degradation rate constants and half-life were calculated. The cytotoxicity and enzymatic degradation of l-DOPA was examined using the human intestinal epithelial Caco-2 cells. The drug was rapidly decarboxylated by aromatic amino acid decarboxylase to dopamine. The conversion of l-DOPA to dopamine was dose- and time-dependent.     

Thermal decomposition of pentacene oxyradicals

The energetics and kinetics of the thermal decomposition of pentacene oxyradicals were studied using a combination of ab initio electronic structure theory and energy-transfer master equation modeling. The rate coefficients of pentacene oxyradical decomposition were computed for the range of 1500-2500 K and 0.01-10 atm and found to be both temperature and pressure dependent. The computational results reveal that oxyradicals with oxygen attached to the inner rings are kinetically more stable than those with oxygen attached to the outer rings. The latter decompose to produce CO at rates comparable to those of phenoxy radical, while CO is unlikely to be produced from oxyradicals with oxygen bonded to the inner rings.     

Use of ring-repeller, double-skimmer electrodes for efficient ion focusing in mass spectrometry.

The design and construction of a new type of time-of-flight mass spectrometer is described. The instrument was designed to improve the ionization efficiency and to efficiently detect ions. The system performance was evaluated using the SIMION software, and was compared with the experimental results. The shapes of the repeller, extraction, and ground electrodes had a strong effect on the trajectory of ions in the processes of ion acceleration and focusing. The major difference between the theory and the experiment can be attributed to space-charge effects.     

The viscosity of aqueous electrolyte solutions and the TTG model

An equation covering the dynamic viscosity from zero to high concentrations has been derived on the basis of the TTG model. The equation is compatible with the Eyring andNMR theories and has a similar form to the Othmer-rule equation. A component of the limiting viscosity slope is shown to be proportional to the Falkenhagen slope. The TTG equation was tested for 20 electrolytes of diverse charge type and found to fit the data within the experimental errors. The equation is simply extended to cover pressure, temperature, and component changes. The viscosities of three multicomponent systems are predicted to within the experimental errors. The derived parameters of the equation were found to be simply related to the TTG volume of the solute.     

Relationship between the transference of a drug from a transdermal patch and the physicochemical properties.

The transferred percentages of 13 drugs to rat skin from transdermal patches were studied to reveal the relationship to their physicochemical properties. The drugs to be tested had melting points of 13.5-234 degrees C, lipophilic indices of 0.475-5.336, and molecular weights of 122.12-392.45. The transferred percentage of drug to intact skin was lower, the higher the melting point, lipophilic index and molecular weight. The same was true in stripped skin, where the transferred percentage of drug was markedly increased. The difference between transferred drug percentages to stripped and intact skin, which could be regarded as the regulatory contribution of the stratum corneum, tended to be larger, the lower the drug's melting point and lipophilic index.     

半夏淀粉的理化特性

研究了不同产地的4种半夏淀粉的理化特性,包括直链淀粉含量、膨胀度、溶解性、持水性、淀粉粒大小和形貌、结晶类型、热特性和糊化特性等。结果表明,这些半夏淀粉中直链淀粉含量为18.60%～23.91%;膨胀度21.53%～23.09%;溶解度11.5%～32.3%;持水性100.3%～119.0%。淀粉粒单粒球形,卵形或圆半球形,直径2～20μm,复粒由2～3个分粒组成,其结晶类型均为C型,结晶度15.0%～37.9%。用差示扫描量热仪测得的转变温度TO、TP和TC分别为71.58～77.75℃、83.03～83.84℃和89.41～90.99℃,热焓为4.316～5.809 J/g。用快速粘度分析仪测定了4种半夏淀粉的糊化特征值:峰值粘度、热糊粘度、冷糊粘度、稀懈值和回复值分别为149.5～226.2、97.7～127.2、141.8～194.3、50.4～99.0和44.2～67.2 RVU。糊化温度77.8～79.9℃,峰值时间8.3～8.7 min。     

Percolation and effective-medium theories for perfluorinated ionomers and polymer composites

Percolation and effective-medium theories are applied to model the transport and elastic properties of perfluorinated ionomers. The composite nature of these polymers is emphasized. The effective-medium theory is generalized to track continuously the evolution from lamellar to fibrillar morphology. The predicted dramatic difference in ion selectivity between lamellar and spherical morphology is verified quantitatively in perfluorinated ionomer blends. The limitations and potential improvements of the effective-medium theory and its relationship to percolation theory are discussed. Applications of these theories to other multiphase polymer systems are also discussed.