Methylene bromide chemistry and photochemistry on rutile TiO2(110)

The chemistry and photochemistry of methylene bromide (CD₂Br₂) on the rutile TiO₂(110) surface was probed using temperature programmed desorption (TPD). CD₂Br₂ desorbed in three desorption states at 145, 160 and 250 K tentatively assigned to desorption from the multilayer, from an η¹-CD₂Br₂ species and a bridging η²-CD₂Br₂ species, respectively. The latter two TPD states presumably involve binding of CD₂Br₂ molecules to the surface through Br coordination at five-coordinate Ti⁴⁺ surface sites. The 160 and 250 K TPD states saturated at coverages of 1.0 and 0.33 ML, respectively, where 1 ML is equivalent to the surface Ti⁴⁺ site density (5.2 × 10¹⁴ cm^? 2). No thermal decomposition of CD₂Br₂ was observed on either the clean surface or with preadsorbed O₂. UV irradiation of CD₂Br₂ on TiO₂(110) resulted in predominately photodesorption, with trace amounts of photodecomposition evidenced in TPD. The rate of CD₂Br₂ photodesorption from TiO₂(110) occurred with a low cross section (~ 2 × 10^? 21 cm²) similar to that expected from direct optical excitation of CD₂Br₂. This observation suggests that charge carriers generated in TiO₂(110) were no more effective in activating adsorbed CD₂Br₂ molecules than would be expected through direct molecular excitation. These findings suggest that photocatalytic destruction of halocarbons such as CD₂Br₂ on TiO₂ may preferentially occur though indirect processes (such as OH radical attack) as opposed to direct electron transfer processes involving charge carriers generated in TiO₂ by bandgap excitation.     

Adsorption and reaction of glycine on the rutile TiO2(011) single crystal surface

The adsorption and reaction of glycine on the surface of a rutile TiO₂(011) single crystal has been studied by X-ray Photoelectron Spectroscopy (XPS) and Temperature Programmed Desorption (TPD) techniques. Special attention was given to the formation and stability of the zwitterion structure (⁺NH₃–CH₂–COO^?) in comparison to that of the dissociated structure (NH₂–CH₂–COO^?). Both species have been observed on the surface at 300 K. The zwitterion structure was found less stable than the dissociated structure. This is in line with other experimental results related to proline on rutile TiO₂(110) single crystal [13, 14], glycine on rutile TiO₂(110) single crystal [17, 24] and computational results related to glycine on rutile TiO₂(110) single crystal [25]. By 500 K most of the zwitterion structure has been converted to the dissociated one. TPD results indicated that glycine reacts in a similar way to carboxylic acids on this surface with the main decomposition products being ketene (CH₂=C=O). Other masses left unassigned for were also observed during TPD. The most intense being m/e 55 that might be due to =CH–C(O)N=or C(O)N=CH fragments.     

Acetaldehyde photochemistry on TiO2(1 1 0)

The ultraviolet (UV) photon induced decomposition of acetaldehyde adsorbed on the oxidized rutile TiO₂(1 1 0) surface was studied with photon stimulated desorption (PSD) and thermal programmed desorption (TPD). Acetaldehyde desorbs molecularly from TiO₂(1 1 0) with minor decomposition channels yielding butene on the reduced TiO₂ surface and acetate on the oxidized TiO₂ surface. Acetaldehyde adsorbed on oxidized TiO₂(1 1 0) undergoes a facile thermal reaction to form a photoactive acetaldehyde–oxygen complex. UV irradiation of the acetaldehyde–oxygen complex initiated photofragmentation of the complex resulting in the ejection of methyl radical into gas phase and conversion of the surface bound fragment to formate.     

Surface oxides of Ir(111) prepared by gas-phase oxygen atoms

The Ir(111) surface is oxidized with gas-phase oxygen atoms under vacuum condition to achieve an oxidation level beyond its saturation coverage for chemisorption. Two surface oxides, rutile IrO₂ of (100) domain and corundum Ir₂O₃ of (001) domain, have been grown at 550 K with different oxygen exposure of 3.6 × 10⁵ L and 7.2 × 10⁵ L respectively. The temperature programmed desorption (TPD) experiment of rutile IrO₂(100) shows its desorption curve (at 4 K s^? 1) peaks at 750 K, followed by a long tail of less pronounced desorption features. On the other hand, TPD of corundum Ir₂O₃(001) displays a symmetric trace, peaking at 880 K. Carbon monoxide titration experiments show that adsorbed CO reduces corundum Ir₂O₃(001) at 400 K, but CO does not adsorb on rutile IrO₂(100) and no reduction reaction occurs. Evidently, among the two surface oxides, corundum Ir₂O₃(001) involves in catalysis of carbon monoxide oxidation, while rutile IrO₂(100) does not. The formation of two surface oxides is also compared, we conclude that the atom arrangement favors Ir₂O₃(001) at the oxide/metal interface.     

The interaction between hexahydroxytriphenylene and the rutile TiO2(110)-(1 × 1) surface at UHV conditions

The interaction between 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and the rutile TiO₂(110)–(1 × 1) surface under ultrahigh vacuum (UHV) conditions was investigated using X-ray photoemission spectroscopy (XPS), ultraviolet photoemission spectroscopy (UPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and density functional theory (DFT) calculations. The NEXAFS results showed that HHTP molecules formed a submonolayer and a monolayer that aligned along the [001]-direction with, respectively, a more or less flat downward orientation and a more upright orientation to the TiO₂ surface. The HHTP molecules that aligned along the [001]-direction were most likely grafted onto the TiO₂(110) surface by a bidentate bridge between each of the oxygen atoms of one of the catechol units within the HHTP molecule and two adjacent Ti(5f)⁴⁺ ions on the TiO₂(110) surface. The coordination is non-dissociative in the case of the submonolayer, but dissociative in the monolayer, according to the analysis of the C1s XPS, UPS, C1s NEXAFS data and complementary DFT calculations.     

Low temperature oxidation of Fe2+ surface sites on the (2 × 1) reconstructed surface of α-Fe2O3(011­2)

Temperature programmed desorption (TPD), electron energy loss spectroscopy (ELS) and low energy electron diffraction (LEED) were used to study the interaction of molecular oxygen with the (2 × 1) reconstructed surface of hematite α-Fe₂O₃(011­2) under UHV conditions. The (2 × 1) surface is formed from vacuum annealing of the ‘ideal’ (1 × 1) surface and possesses Fe²⁺ surface sites based on ELS. While O₂ does not stick to the (1 × 1) surface at 120 K, the amount of O₂ that can be reversibly adsorbed at 120 K on the (2 × 1) surface was estimated to be ～ 0.5 ML (where 1 ML is defined as the Fe³⁺ surface coverage on the ideal (1 × 1) surface), with additional O₂ that is irreversibly adsorbed based on subsequent H₂O TPD. Molecularly and dissociatively adsorbed O₂ modifies the surface chemistry of H₂O both in terms of enhanced OH stability (relative to either the (1 × 1) or (2 × 1) surfaces) and in the blocking of H₂O adsorption sites. While O₂ adsorption at 120 to 300 K does not transform the (2 × 1) surface into the (1 × 1) surface, the influence of O₂ on the (2 × 1) surface involves both charge transfer from surface Fe²⁺ sites and formation of an ordered c(2 × 2) structure resulting from O₂ dissociation.     

Oxygen plasma activation of Cr(CO)6 on α-Fe2O3(0001)

The chemistry of Cr(CO)₆ on the Fe₃O₄(111) surface termination of α-Fe₂O₃(0001) was explored using temperature programmed desorption (TPD), Auger electron spectroscopy (AES), static secondary ion mass spectrometry (SSIMS) and low energy electron diffraction (LEED) both with and without activation from an oxygen plasma source. No thermal decomposition of Cr(CO)₆ was detected on the surface in the absence of O₂ plasma treatment, with first layer molecules desorbing in TPD at 215 K from a close-packed overlayer. The interaction of first layer Cr(CO)₆ with the Fe₃O₄(111)-termination was weak, desorbing only ～ 30 K above the leading edge of the multilayer state. Activation of multilayer coverages of Cr(CO)₆ with the O₂ plasma source at 100 K resulted in complete conversion of the outer Cr(CO)₆ layers, presumably to a disordered Cr oxide film, with Cr(CO)₆ molecules near the surface left unaffected. Absence of CO or CO₂ desorption states suggests that all carbonyl ligands are liberated for each Cr(CO)₆ molecule activated by the plasma. AES and SSIMS both show that O₂ plasma activation of Cr(CO)₆ results in a carbon-free surface (after desorption of unreacted Cr(CO)₆). LEED, however, shows that the Cr oxide film was disordered at 600 K and likely O-terminated based on subsequent water TPD. Attempts to order the film at temperatures above 650 K resulted in dissolution of Cr into the α-Fe₂O₃(0001) crystal based on SSIMS, an observation linked to the Fe₃O₄(111) termination of the surface and not to the properties of α-Cr₂O₃/α-Fe₂O₃ corundum interface. Nevertheless, this study shows that O₂ plasma activation of Cr(CO)₆ is an effective means of depositing Cr oxide films on surfaces without accompanying carbon contamination.     

Photochemistry of methyl bromide on the α-Cr2O3(0001) surface

The photochemical properties of the Cr-terminated α-Cr₂O₃(0001) surface were explored using methyl bromide (CH₃Br) as a probe molecule. CH₃Br adsorbed and desorbed molecularly from the Cr-terminated α-Cr₂O₃(0001) surface without detectable thermal decomposition. Temperature programmed desorption (TPD) revealed a CH₃Br desorption state at 240 K for coverages up to 0.5 ML, followed by more weakly bound molecules desorbing at 175 K for coverages up to 1 ML. Multilayer exposures led to desorption at ~ 130 K. The CH₃Br sticking coefficient was unity at 105 K for coverages up to monolayer saturation, but decreased as the multilayer formed. In contrast, pre-oxidation of the surface (using an oxygen plasma source) led to capping of surface Cr³⁺ sites and near complete removal of CH₃Br TPD states above 150 K. The photochemistry of chemisorbed CH₃Br was explored on the Cr-terminated surface using post-irradiation TPD and photon stimulated desorption (PSD). Irradiation of adsorbed CH₃Br with broad band light from a Hg arc lamp resulted in both photodesorption and photodecomposition of the parent molecule at a combined cross section of ~ 10^? 22 cm². Photodissociation of the CH₃–Br bond was evidenced by both CH₃ detected in PSD and Br atoms left on the surface. Use of a 385 nm cut-off filter effectively shut down the photodissociation pathway but not the parent molecule photodesorption process. From these observations it is inferred that d-to-d transitions in α-Cr₂O₃, occurring at photon energies < 3 eV, do not significantly promote photodecomposition of adsorbed CH₃Br. It is unclear to what extent band-to-band versus direct CH₃Br photolysis play in CH₃–Br bond dissociation initiated by more energetic photons.     

Preparation and characterization of Fe3O4(1 1 1) nanoparticles and thin films on Au(1 1 1)

Fe₃O₄ nanoparticles and thin films were prepared on the Au(1 1 1) surface and characterized using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Fe₃O₄ was formed by annealing α-Fe₂O₃(0 0 0 1) structures on Au(1 1 1) at 750 K in ultrahigh vacuum (UHV) for 60 min. Transformation of the α-Fe₂O₃(0 0 0 1) structures into Fe₃O₄ nanoparticles and thin films was supported by XPS. STM images show that during the growth procedure used, Fe₃O₄ initially appears as nanoparticles at low coverages, and forms thin films at ～2 monolayer equivalents (MLE) of iron. Two types of ordered superstructures were observed on the Fe₃O₄ particles with periodicities of ～50 and ～42 Å, respectively. As the Fe₃O₄ particles form more continuous films, the ～50 Å feature was the predominant superstructure observed. The Fe₃O₄ structures at all coverages show a hexagonal unit cell with a ～3 Å periodicity in the atomically resolved STM images.     

TPD and ITPD study of materials used as chemoresistive gas sensors

Temperature-programmed desorption (TPD) and a differential form of it, called intermittent temperature-programmed desorption (ITPD), turned out to be powerful characterising techniques for chemoresistive materials applied to gas sensing. We investigated samples of SnO₂, TiO₂ and solid solutions of them (Ti_xSn_1 ? xO₂). TPD and ITPD experiments were carried out in vacuum, with samples previously treated in pure O₂ (100 Torr, 500 °C, 30 min). Amounts of desorbed O₂ corresponded for all Ti-containing samples to less than 10% of a compact monolayer of ions O^2?. Corresponding values of the apparent activation energy of desorption (E_app) were calculated directly from the Arrhenius plots for each partial TPD and ranged from about 100 to 330 kJ mol^? 1 (1.16 to 3.82 eV).     

Infrared study of triruthenium dodecacarbonyl interactions with gold

We present here a study of the interaction of triruthenium dodecacarbonyl Ru₃(CO)₁₂ with gold surfaces using time-evolved and temperature-programmed infrared reflection absorption spectroscopy (IRAS) and STM. Ru₃(CO)₁₂ exhibits drastically different adsorption/desorption behavior on high-index surfaces of gold in comparison to the smooth Au(111) surface. On the smooth Au(111) surface, the adsorption of Ru₃(CO)₁₂ at 200 K is observed to be molecular and reversible with the molecule's Ru₃-plane oriented essentially perpendicular to the surface in the first and second layer. In the multilayer (> 3 ML), the molecule is oriented parallel (or moderately inclined) to the surface. On high-index gold surfaces, prepared by partial annealing of rough gold films, the molecules dissociate. Vibrational spectra reveal dissociation of carbonyl to Ru and CO at elevated temperature (> 250 K) with the formation of CO covered Ru-islands and the subsequent desorption of CO from Ru-islands. Increasing amounts of CO observed with increasing surface roughness demonstrate that the rate of Ru₃(CO)₁₂ dissociation is related directly to the surface roughness of the gold surface. STM images reveal at low coverage the formation of 2-D islands of carbonyl fragments with lateral sizes of 1 to 1.5 nm and at higher coverage the formation of larger 3-D islands of 1 to 3 layers and lateral sizes above 10 nm.     

A comparative DFT study of adsorption and catalytic performance of Au nanoparticles at anatase and brookite TiO2 surfaces

We have compared the adsorption properties of small Au_n (n = 1–8) nanoparticles on the defect-free (stoichiometric) and defective (partially reduced) brookite TiO₂(210) and anatase TiO₂(101) surfaces using density functional theory calculations. The interaction between Au atoms and anatase TiO₂(101) was determined to be quite weak and small Au_n particles grown at defects (O vacancies) prefer extended 2D structures. By contrast, dispersion and 3D configurations appear to be favored at brookite TiO₂(210) for Au_n nanoparticles due to their strong interaction. Calculations of CO oxidation at Au_n (n = 6–8) particles supported at defective brookite TiO₂(210) show that occurrence of protruding low-coordinated Au atoms is essential for favorable CO adsorption and subsequent reaction with O₂. In particular, the configuration of the Au_n nanoparticles can determine the energetics in the formation of active Au atoms, and their mobility also affects the reaction between CO and O₂ (or O).     

Visible light induced photodesorption of NO from the α-Cr2O3(0001) surface

Nitric oxide chemistry and photochemistry on the Cr-terminated surface of α-Cr₂O₃(0001) were examined using temperature programmed desorption (TPD), sticking coefficient measurements and photodesorption. NO exposed to α-Cr₂O₃(0001) at 100 K binds at surface Cr cation sites forming a strongly bound surface species that thermally desorbs at 320–340 K, depending on coverage. No thermal decomposition was detected in TPD in agreement with previous results in the literature. Sticking probability measurements at 100 K indicated near unity sticking for NO up to coverages of ~ 1.3 ML, with additional adsorption with higher exposures at decreased sticking probability. These results suggest that some Cr cation sites on the α-Cr₂O₃(0001) surface were capable of binding more than one NO molecule, although it is unclear whether this was as separate NO molecules or as dimers. Photodesorption of adsorbed NO was examined for surface coverages below the 1 ML point. Both visible and UV light were shown to photodesorb NO without detectable NO photodecomposition. Visible light photodesorption of NO occurred with a greater cross section than estimated using UV light. The visible light photodesorption event was not associated with bandgap excitation in α-Cr₂O₃(0001), but instead was linked to excitation of a surface Cr^3 +–NO^? charge transfer complex. These results illustrate that localized photoabsorption events at surface sites with unique optical properties (relative to the bulk) can result in unexpected surface photochemistry.     

Adsorption of L-cysteine on rutile TiO2(110)

We have used X-ray photoelectron spectroscopy to study the adsorption of L-cysteine on a rutile TiO₂(110) surface at room temperature and ? 65 °C. For the molecules in direct contact with the surface our results suggest that the molecules bind dissociatively to the fivefold-coordinated Ti atoms of the surface through their deprotonated carboxylic groups. A second, dissociative interaction occurs between the molecular thiol groups and the surface. It is attributed to a dissociative bond to the bridging oxygen vacancies. Most likely, the thiol groups are deprotonated and a bond is formed between the thiolates and defects. In an alternative scenario, the C–S bond is cleaved and atomic sulfur binds to the defects. With regard to the molecular amino groups, they remain neutral at the lowest investigated coverages (0.3–0.5 ML), but already starting from around 0.7 ML nominal coverage protons are being transferred to them. The fraction of protonated amino groups increases with coverage and becomes dominating in multilayers prepared at room temperature and ? 65 °C. In these multilayers the carboxylic groups are deprotonated.     

Atomic surface structures on multi-layered cuprate superconductor Ba2Ca4Cu5O10(O1−xFx)2 observed by STM

We investigate the scanning tunneling microscopy (STM) on the multi-layered cuprate superconductor Ba₂Ca₄Cu₅O₁₀(O_1?xF_x)₂ (F0245, T_c = 79 K, x = 0.72).The STM images show clear atomic lattice structures and large random spot structures. Among the regular square-lattice atomic corrugation with the period of the lattice constant a ～ 0.38 nm, another kind of atomic spots arranged into the fourfold cross shaped clusters is clearly observed along the diagonal direction with the period of 0.26 nm. These clusters are being distributed inhomogeneously, which are due to the charge imbalance associated with the apical O/F rate. The apical O and F sites are also identified from the positions of such clusters in the STM topographic images.     

Fe3O4 surface electronic structures and stability from GGA + U

The electronic structures, stabilities and magnetic properties of the Fe₃O₄(111), (110) and (001) surfaces have been computed at the level of density functional theory by including the Hubbard parameter (U) for describing the on-site Coulomb interaction of iron 3d electrons. Among the six Fe₃O₄(111) terminations, the Fe_tet1 (exposing tetrahedral coordinated iron) and Fe_oct2 (exposing octahedral coordinated iron) terminations are more stable and have metallic character. For the Fe₃O₄(110) surface, strong surface distortion has been found; the A-layer termination (exposing tetrahedral coordinated iron) has metallic character, while the B-layer termination (exposing tetrahedral and octahedral coordinated iron) has half-metal character. For the Fe₃O₄(001) surface, both A-layer (exposing tetrahedral coordinated iron) and B-layer (exposing octahedral coordinated iron) terminations have half-metal character. The surface stability of (111) > (001) > (110) on the basis of the computed surface energies agrees well with the experimental findings, and explains reasonably the observed diversity and complexity of the experiments.     

Interaction of HNCO with Au(111) surfaces

The surface chemistry of isocyanic acid, HNCO, and its dissociation product, NCO, was studied on clean, O-dosed and Ar ion bombarded Au(111) surfaces. The techniques used are high resolution energy loss spectroscopy (HREELS) and temperature-programmed desorption (TPD). The structure of Ar ion etched surface is explored by scanning tunneling microscopy (STM). HNCO adsorbs molecularly on Au(111) surface at 100 K yielding strong losses at 1390, 2270 and 3230 cm^? 1. The weakly adsorbed HNCO desorbs in two peaks characterized by T_p = 130 and 145 K. The dissociation of the chemisorbed HNCO occurs at 150 K to give NCO species characterized by a vibration at 2185 cm^? 1. The dissociation process is facilitated by the presence of preadsorbed O and by defect sites on Au(111) produced by Ar ion bombardment. In the latter case the loss feature of NCO appeared at 2130 cm^? 1. Isocyanate on Au(111) surface was found to be more stable than on the single crystal surfaces of Pt-group metals. Results are compared with those obtained on supported Au catalysts.     

One-dimensional confinement in heterogeneous catalysis: Trapped oxygen on RuO2(110) model catalysts

With temperature programmed reaction (TPR) experiments and kinetic Monte Carlo (kMC) simulations of coadsorbed oxygen and HCl on the RuO₂(110) surface we studied the thermal stabilization of dissociatively adsorbed oxygen. Due to one-dimensional confinement single surface O atoms can be trapped by surface chlorine atoms so that surface oxygen is not able to desorb from the RuO₂(110) surface at the expected temperature of 420 K. Trapped oxygen needs desorption temperatures as high as 700 K where it recombines with bridging O from RuO₂(110) to form O₂. Kinetic modeling of catalytic reactions with dimensional confinement of their reaction intermediates on the catalyst's surface requires the application of kinetic Monte Carlo simulations which are beyond the mean field approach.     

Ultrathin Y2O3(111) films on Pt(111) substrates

The growth of ultrathin films of Y₂O₃(111) on Pt(111) has been studied using scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS), and low energy electron diffraction (LEED). The films were grown by physical vapor deposition of yttrium in a 10^? 6 Torr oxygen atmosphere. Continuous Y₂O₃(111) films were obtained by post-growth annealing at 700 °C. LEED and STM indicate an ordered film with a bulk-truncated Y₂O₃(111)–1 × 1 structure exposed. Furthermore, despite the lattices of the substrate and the oxide film being incommensurate, the two lattices exhibit a strict in-plane orientation relationship with the [11?0] directions of the two cubic lattices aligning parallel to each other. XPS measurements suggest hydroxyls to be easily formed at the Y₂O₃ surface at room temperature even under ultra high vacuum conditions. The hydrogen desorbs from the yttria surface above ~ 200 °C.     

TiO2(110)-(1 × 1) supported Cu particles: An FT-RAIRS investigation

The morphology of TiO₂(110)-(1 × 1) supported Cu particles has been investigated by Fourier Transform Reflection Absorption Infrared Spectroscopy (FT-RAIRS), employing adsorbed CO as a probe molecule sensitive to local surface structure. For Cu coverage (deposited at 300 K) less than 2.85 MLE nucleated Cu particles in the range 2 nm–4 nm are formed, as indicated by a final state shift in the core level Cu(2p_3/2) binding energy and by the existence of only transmission bands in the FT-RAIRS spectra for adsorbed CO. ν_S(CO) indicates that these small particles expose sites similar to those of the stepped Cu surfaces Cu(211), Cu(311), and Cu(755). At Cu coverages in the range of 6 MLE and above, corresponding to particle sizes above 4.6 nm, ν_S(CO) indicates the predominance of (110), (100) and (111) adsorption sites. Annealing the Cu layers to 650 K results in the slight growth of the particle sizes, and transformation of the CO adsorption sites corresponding to the close packed facets. The transformation of the local dielectric from that of titania to that dominated by the Cu particle is shown to take place between 3.7 and 4.2 nm, and this change is also to a smaller extent sensitive to the dispersion of the particles.