Designing Nonfullerene Acceptors with Oligo(Ethylene Glycol) Side Chains: Unraveling the Origin of Increased Open-Circuit Voltage and Balanced Charge Carrier Mobilities

Despite the recent rapid development of organic solar cells (OSCs), the low dielectric constant (ϵ_r=3–4) of organic semiconducting materials limits their performance lower than inorganic and perovskite solar cells. In this work, we introduce oligo(ethylene glycol) (OEG) side chains into the dicyanodistyrylbenzene-based non-fullerene acceptors (NIDCS) to increase its ϵ_r up to 5.4. In particular, a NIDCS acceptor bearing two triethylene glycol chains (NIDCS-EO3) shows V_OC as high as 1.12 V in an OSC device with a polymer donor PTB7, which is attributed to reduced exciton binding energy of the blend film. Also, the larger size grain formation with well-ordered stacking structure of the NIDCS-EO3 blend film leads to the increased charge mobility and thus to the improved charge mobility balance, resulting in higher J_SC, FF, and PCE in the OSC device compared to those of a device using the hexyl chain-based NIDCS acceptor (NIDCS-HO). Finally, we fabricate NIDCS-EO3 devices with various commercial donors including P3HT, DTS-F, and PCE11 to show higher photovoltaic performance than the NIDCS-HO devices, suggesting versatility of NIDCS-EO3.     

The Effect of Oligo(Ethylene Oxide) Side Chains: A Strategy to Improve Contrast and Switching Speed in Electrochromic Polymers

Solution-processable electrochromic polymers (ECPs) with high performance are urgently needed for extensive applications. Nevertheless, they suffer from slow switching speed because of low ionic conductivities. Herein, we present an effective strategy to improve the contrast and switching speed in ECPs via facile side-chain engineering. A novel electrochromic thieno[3,2-b]thiophene-based polymer (PmOTTBTD) is designed and successfully synthesized by introducing oligo(ethylene oxide) side chains with high ionic conductivity. Compared to the counterpart POTTBTD without modification by oligo(ethylene oxide) chains, PmOTTBTD demonstrates nearly double contrast (42 % vs. 24 %) with a fast oxidation switching process that just takes half of the time when detected under 400 nm, as well as much higher coloration efficiencies (e. g. 239.04 cm² C⁻¹ vs. 226.26 cm² C⁻¹ @ 400 nm and 314.04 cm² C⁻¹ vs. 174.00 cm² C⁻¹ @ 650∼700 nm). Besides, PmOTTBTD exhibits excellent stability with negligible decay after 3000 cycles. Our work suggests a facile strategy that could be adopted to realize high-performance ECPs via molecular design tuning.     

Multifunctional Conjugated Polymers with Main‐Chain Donors and Side‐Chain Acceptors for Dye Sensitized Solar Cells (DSSCs) and Organic Photovoltaic Cells (OPVs)

A novel multifunctional conjugated polymer (RCP‐1) composed of an electron‐donating backbone (carbazole) and an electron‐accepting side chain (cyanoacetic acid) connected through conjugated vinylene and terthiophene has been synthesized and tested as a photosensitizer in two major molecule‐based solar cells, namely dye sensitized solar cells (DSSCs) and organic photovoltaic cells (OPVs). Promising initial results on overall power conversion efficiencies of 4.11% and 1.04% are obtained from the basic structure of DSSCs and OPVs based on RCP‐1, respectively. The well‐defined donor (D)‐acceptor (A) structure of RCP‐1 has made it possible, for the first time, to reach over 4% of power conversion efficiency in DSSCs with an organic polymer sensitizer and good operation stability.     

Thienopyrazine‐Based Low‐Bandgap Poly(heteroaryleneethynylene)s for Photovoltaic Devices

Summary: Low‐bandgap π‐conjugated polymers that consist of alkyl thiophene/alkoxy phenylene and 2,3‐diphenylthieno[3,4‐b]pyrazine units have been prepared in high yields by a Sonogashira polycondensation. The copolymers are characterized by NMR, IR, UV, GPC, and elemental analysis. Thin films of the polymers P1 , P2 , and P3 exhibit an optical bandgap of ≈1.57–1.60 eV. Under simulated AM 1.5 conditions P2/PCBM devices on polyester foil provide a short circuit current of I_SC = 10.72 mA · cm⁻², an open circuit voltage of V_oc = 0.67 V, and a power conversion efficiency of 2.37%.

Schematic of the photovoltaic device made from the polymers synthesized here.     

Thermosensitivity of Bile Acid‐Based Oligo(ethylene glycol) Stars in Aqueous Solutions

Amphiphilic star‐shaped oligo(ethylene glycol)s with a hydrophobic bile acid core and varying number of hydrophilic arms have been made. Their thermal behavior in aqueous solutions depends on the number rather than the length of the arms. The two‐armed lithocholate derivative showed the strongest tendency for association and exhibited the lowest cloud point (79 °C) of the oligomers made, as well as another phase separation at a lower temperature (31 °C). The “double thermosensitivity” arising both from the salt‐dependent LCST of the oligo(ethylene glycol) segments and the temperature‐responsive self‐assembly of amphiphilic bile acid derivative provides an interesting path in the design of bile acid‐based smart materials.

     

Synthesis of Degradable Poly[(Ethylene Glycol)‐co‐(Glycolic Acid)] via the Post‐Polymerization Oxyfunctionalization of Poly(Ethylene Glycol)

To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)‐co‐(glycolic acid)] (P(EG‐co‐GA)) via a ruthenium‐catalyzed, post‐polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG‐co‐GA) copolymers are shown to undergo hydrolysis under mild conditions.

     

Planar Conjugated Polymers Containing 9,10‐Disubstituted Phenanthrene Units for Efficient Polymer Solar Cells

Four novel conjugated polymers ( P1‐4 ) with 9,10‐disubstituted phenanthrene (PhA) as the donor unit and 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit are synthesized and characterized. These polymers are of medium bandgaps (2.0 eV), low‐lying HOMO energy levels (below −5.3 eV), and high hole mobilities (in the range of 3.6 × 10⁻³ to 0.02 cm² V⁻¹ s⁻¹). Bulk heterojunction (BHJ) polymer solar cells (PSCs) with P1‐4 :PC₇₁BM blends as the active layer and an alcohol‐soluble fullerene derivative (FN‐C60) as the interfacial layer between the active layer and cathode give the best power conversion efficiency (PCE) of 4.24%, indicating that 9,10‐disubstituted PhA are potential donor materials for high‐efficiency BHJ PSCs.

     

Crystalline Conjugated Polymers for Organic Solar Cells: From Donor,Acceptor to Single‐Component

Organic solar cells have made rapid progress in the last two decades due to the innovation of conjugated materials and photovoltaic devices. Microphase separation that connects with materials and devices plays a crucial role in the charge generation process. In this account, we summary our recent works of developing new crystalline conjugated polymers to control the microphase separation in thin films in order to realize high performance in solar cells, including crystalline diketopyrrolopyrrole‐based donor polymers, perylene bisimide‐based electron acceptors, and “double‐cable” conjugated polymers that contain covalently‐linked crystalline donor and acceptor in one material for single‐component organic solar cells.     

Thermally Driven Structural Order of Oligo(Ethylene Glycol)-Terminated Alkanethiol Monolayers on Au(111) Prepared by Vapor Deposition

To probe the effects of deposition temperature on the formation and structural order of self-assembled monolayers (SAMs) on Au(111) prepared by vapor deposition of 2-(2-methoxyethoxy)ethanethiol (CH₃O(CH₂)₂O(CH₂)₂SH, EG2) for 24 h, we examined the surface structure and electrochemical behavior of the resulting EG2 SAMs using scanning tunneling microscopy (STM) and cyclic voltammetry (CV). STM observations clearly revealed that EG2 SAMs vapor-deposited on Au(111) at 298 K were composed of a disordered phase on the entire Au surface, whereas those formed at 323 K showed improved structural order, showing a mixed phase of ordered and disordered phases. Moreover, at 348 K, uniform and highly ordered EG2 SAMs on Au(111) were formed with a (2 × 3√3) packing structure. CV measurements showed sharp reductive desorption (RD) peaks at −0.818, −0.861, and −0.880 V for EG2 SAM-modified Au electrodes formed at 298, 323, and 348 K, respectively. More negative potential shifts of RD peaks with increasing deposition temperature are attributed to an increase in van der Waals interactions between EG2 molecular backbones resulting from the improved structural quality of EG2 SAMs. Our results obtained herein provide new insights into the formation and thermally driven structural order of oligo(ethylene glycol)-terminated SAMs vapor-deposited on Au(111).     

Enhanced Performance of Organic Photovoltaic Cells Fabricated with a Methyl Thiophene‐3‐Carboxylate‐Containing Alternating Conjugated Copolymer

A new donor‐acceptor copolymer, containing benzodithiophene (BDT) and methyl thiophene‐3‐carboxylate (3MT) units, is designed and synthesized for polymer solar cells (PSCs). The 3MT unit is used as an electron acceptor unit in this copolymer to provide a lower highest occupied molecular orbital (HOMO) level for obtaining polymer solar cells with a higher open‐circuit voltage (V_OC). The resulting bulk heterojunction PSC made of the copolymer and [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) exhibits a power conversion efficiency (PCE) up to 4.52%, a short circuit current (J_SC) of 10.5 mA·cm‐², and a V_OC of 0.86 V.     

Synthesis and Photovoltaic Properties of Two‐Dimensional Low‐Bandgap Copolymers Based on New Benzothiadiazole Derivatives with Different Conjugated Arylvinylene Side Chains

A new series of 2,1,3‐benzothiadiazole (BT) acceptors with different conjugated aryl‐vinylene side chains have been designed and used to build efficient low‐bandgap (LBG) photovoltaic copolymers. Based on benzo[1,2‐b:3,4‐b′]dithiophene and the resulting new BT derivatives, three two‐dimensional (2D)‐like donor (D)–acceptor (A) conjugated copolymers have been synthesised by Stille coupling polymerisation. These copolymers were characterised by NMR spectroscopy, gel‐permeation chromatography, thermogravimetric analysis and differential scanning calorimetry. UV/Vis absorption and cyclic voltammetry measurements indicated that their optical and electrochemical properties can be facilely modified by changing the structures of the conjugated aryl‐vinylene side chains. The copolymer with phenyl‐vinylene side chains exhibited the best light harvesting and smallest bandgap of the three copolymers. The basic electronic structures of D–A model compounds of these copolymers were also studied by DFT calculations at the B3LYP/6‐31G* level of theory. Polymer solar cells (PSCs) with a typical structure of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/copolymer:[6,6]‐phenyl‐C₆₁(C₇₁)‐butyric acid‐methyl ester (PCBM)/calcium (Ca)/aluminum (Al) were fabricated and measured under the illumination of AM1.5G at 100 mW cm^?2. The results showed that the device based on the copolymer with phenyl‐vinylene side chains had the highest efficiency of 2.17 % with PC₇₁BM as acceptor. The results presented herein indicate that all the prepared copolymers are promising candidates for roll‐to‐roll manufacturing of efficient PSCs. Suitable electronic, optical and photovoltaic properties of BT‐based copolymers can also be achieved by fine‐tuning the structures of the aryl‐vinylene side chains for photovoltaic application.     

Enhanced Cellular Activity in Gelatin‐Poly(Ethylene Glycol) Hydrogels without Compromising Gel Stiffness

Adhesion and proliferation of cells are often suppressed in rigid hydrogels as gel stiffness induces mechanical stress to embedded cells. Herein, the composite hydrogel systems to facilitate high cellular activities are described, while maintaining relatively high gel stiffness. This unusual property is obtained by harmonizing gelatin‐poly(ethylene glycol)‐tyramine (GPT, semisynthetic polymer) and gelatin‐hydroxyphenyl propionic acid conjugates (GH, natural polymer) into hydrogels. A minimum GH concentration of 50% is necessary for cells to be proliferative. GPT is utilized to improve biological stability (>1 week) and gelation time (<20 s) of the hydrogels. These results suggest that deficiency in cellular activity driven by gel stiffness could be overcome by finely tuning the material properties in the microenvironments.

     

Poly(ethylene glycol)‐block‐Poly(glycidyl methacrylate) with Oligoamine Side Chains as Efficient Gene Vectors

Well‐defined diblock copolymers, poly(ethylene glycol)‐block‐poly(glycidyl methacrylate)s (PEG‐b‐PGMAs), with different poly(glycidyl methacrylate) (PGMA) chains, were prepared via atom transfer radical polymerization (ATRP) from the same macromolecular initiator 2‐bromoisobutyryl‐terminated poly(ethylene glycol) (PEG). Ethyldiamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA), and polyethyleneimine (PEI) with an of 400 (PEI₄₀₀) were used to decorate PEG‐b‐PGMAs to get the cationic polymers PEG‐b‐PGMA‐ oligoamines. These cationic polymers possessed high buffer capability and could condense plasmid DNA (pDNA) into nanoscaled complexes of 125–530 nm. These complexes showed the positive zeta potential of 20–35 mV at N/P ratios of 10–50. Most of them exhibited very low cytotoxicity and good transfection efficiency in 293T cells. The presence of the serum medium did not decrease the transfection efficiency due to the steric stabilization of the PEG chains.

     

Conjugated Polymers Via Direct Arylation Polymerization in Continuous Flow: Minimizing the Cost and Batch‐to‐Batch Variations for High‐Throughput Energy Conversion

Continuous flow methods are utilized in conjunction with direct arylation polymerization (DArP) for the scaled synthesis of the roll‐to‐roll compatible polymer, poly[(2,5‐bis(2‐hexyldecyloxy)phenylene)‐alt‐(4,7‐di(thiophen‐2‐yl)‐benzo[c][1,2,5]thiadiazole)] (PPDTBT). PPDTBT is based on simple, inexpensive, and scalable monomers using thienyl‐flanked benzothiadiazole as the acceptor, which is the first β‐unprotected substrate to be used in continuous flow via DArP, enabling critical evaluation of the suitability of this emerging synthetic method for minimizing defects and for the scaled synthesis of high‐performance materials. To demonstrate the usefulness of the method, DArP‐prepared PPDTBT via continuous flow synthesis is employed for the preparation of indium tin oxide (ITO)‐free and flexible roll‐coated solar cells to achieve a power conversion efficiency of 3.5% for 1 cm² devices, which is comparable to the performance of PPDTBT polymerized through Stille cross coupling. These efforts demonstrate the distinct advantages of the continuous flow protocol with DArP avoiding use of toxic tin chemicals, reducing the associated costs of polymer upscaling, and minimizing batch‐to‐batch variations for high‐quality material.     

Poly(diindenonaphthalene) and Poly(indenofluorene) – Tuning the Absorption Properties of Low Bandgap Cross‐Conjugated Polymers

Summary: Semiconducting polymers with moderate HOMO–LUMO energy gaps between 1.5 and 2.0 eV are of increasing attraction as donor components of bulk heterojunction‐type organic solar cells. The synthesis and characterization of a novel cross‐conjugated, aromatic polymer, poly(diindenonaphthalene) PDIN, with a HOMO‐LUMO gap of ca. 1.6 eV (λ_max: 724 nm) in comparison to poly(indenofluorene) PIF, a previously described, structurally related polymer, is presented. The replacement of the central benzene ring of PIF by a naphthalene moiety in PDIN leads to an increase of the optical bandgap energy of ca. 0.16 eV.

Chemical structure of PIF and PDIN.     

Pd‐Catalysed Direct Arylation Polymerisation for Synthesis of Low‐Bandgap Conjugated Polymers and Photovoltaic Performance

Low‐bandgap conjugated copolymers based on a donor–acceptor structure have been synthesised via palladium‐complex catalysed direct arylation polymerisation. Initially, we report the optimisation of the synthesis of poly(cyclopentadithiophene‐alt‐benzothiadiazole) (PCPDTBT) formed between cyclopentadithiophene and dibromobenzothiadiazole units. The polymerisation condition has been optimised, which affords high‐molecular‐weight polymers of up to M _n = 70 k using N‐methylpyrrolidone as a solvent. The polymers are used to fabricate organic photovoltaic devices and the best performing PCPDTBT device exhibits a moderate improvement over devices fabricated using the related polymer via Suzuki coupling. Similar polymerisation conditions have also been applied for other monomer units.