恶臭气体的治理技术及其进展

本文对近十年来国内外在治理恶臭气体方面的研究、应用治理技术及正在发展中的新技术作了较为全面的介绍,主要方法有物理法、化学法和生物法,如掩蔽法、稀释扩散法、燃烧法、化学氧化法、光催化氧化法、吸收法、吸附法、生物法和其它新的方法。预测了新技术发展趋势和应用前景。     

润湿力法可焊性试验方法简介

在1979年出版的国际标准中,有焊槽法、焊球法和烙铁法等三种可焊性试验方法.焊槽法和烙铁法都是目测法,焊球法是简单的定量可焊性测试方法.目前,国内外正在起草测量润湿力的可焊性试验法(或叫润湿称量法).几年来的实践表明,它比焊球法更完善,提供了一个精确的润湿能力的数字表达方法.本文介绍这一方法的简单原理、特点和有关问题.     

有机溶剂回收技术的研究

本文对有机溶剂的回收方法，如吸附法、吸收法、冷凝法和膜分离法等的研究进展与应用进行了综述。其中，吸附法在工业上的应用最为广泛，本文着重介绍了吸附法的工艺以及吸附剂的研究。而膜分离法作为最有发展前景的一种回收方法，主要问题为提高膜的通量和选择性。     

硫化氢的危害与防治

对硫化氢在油气田中的存在状况和危害性的研究结果表明,其主要危害是引起人员中毒以及氢脆作用造成的油田设备腐蚀。详细介绍了防治硫化氢的方法和措施,包括沉淀法、物理吸收法、钾碱法和氨水法、氧化法、金属氧化物吸收法、高压静电法等。对各种方法的防治机理及其应用状况进行了论述。     

高级氧化技术处理垃圾渗滤液的研究进展

本文介绍了包括化学氧化法、电化学氧化法、光催化氧化法、超声氧化法、辐照氧化法和催化湿式氧化法等在内的高级氧化技术的机理和运用于垃圾渗滤液处理的研究进展,并提出高级氧化技术与生物处理联合运用和各种高级氧化工艺之间的优化组合将是实现高级氧化技术在垃圾渗滤液处理中工程化运用的发展方向.     

水中铅的测定方法比较

由于水中铅的含量较低,常用的测定方法是石墨炉原子吸收法和氢化物发生-原子荧光法。通过对干扰的消除方法、检出限实验、加标回收实验以及检测消耗时间和涉及药品试剂等方面的比较,得出石墨炉原子吸收法和氢化物发生-原子荧光法检测水中铅的优劣:石墨炉原子吸收法前处理较为简单,所涉及药品较少,成本较低,适合大批量样品检测;氢化物发生-原子荧光法的精密度高于石墨炉原子吸收法,适合于科研型实验研究。     

VOCs恶臭污染物质的污染状况和一般处理方法

VOCs恶臭污染物质是一些既有异味且具有挥发性的有机气态污染物质，对人体健康和生态环境造成很大危害。VOCs恶臭物质来源于生活和工业生产等方面。常用的处理方法有吸附法、吸收法、燃烧法、冷凝法、生物法、膜分离法等。其中，生物法处理有机废气具有运行费用低、维护管理方便、没有二次污染等优点，成为今后治理VOCs恶臭污染物质的清洁型生物方法。     

小流域水质评价方法对比研究

为分析小流域水质评价方法的准确度和适应度,以小安溪流域2017年和2018年的监测数据为基础,利用单因子评价法、综合指数评价法、内梅罗污染指数法和加拿大水质指数法进行水质评价,利用等标水质分析的思想对比了四种方法的评价准确度。评价结果显示:单因子评价法更适合评价水质分布较均匀的流域,内梅罗污染指数法要更为客观一些,加拿大水质指数法更适合较大的、评价指标较多的流域。综合指数评价法是最适合小流域水质评价的。其结果为小流域水质评价方法选择提供了借鉴。     

不同含碳量天然气脱碳方案选择

分析国内外常用脱碳方法和各油气田不同含碳量天然气脱碳实例,比较各种脱碳方案的操作条件、适用范围以及优缺点,给出不同含碳量天然气的脱碳方案:当含碳量为2%～10%时可选用常规醇胺法、热碳酸钾法、物理-化学吸收法、变压吸附法;当含碳量为10%～30%时可选用活化MDEA法、热碳酸钾法、物理吸收法、物理-化学吸收法;当含碳量为30%～70%时可选用改良热碳酸钾法、物理吸收法、物理-化学吸收法、膜分离法+常规醇胺法、膜分离法+热碳酸钾法;当含碳量大于70%时可选用低温分离法、膜分离法+化学吸收法。     

MPS法高精度自由表面识别方法研究

为了提高粒子法即移动粒子半隐式法(MovingParticleSemi-implicitmethod,MPS法)中自由表面粒子的识别精度,降低由粒子误判引起的非物理压力振荡,对MPS法的自由表面识别方法进行了改进。在原始自由表面判别标准的基础上增加辅助判别条件,提出2种新的自由表面判别法即压力判别法和填充率判别法。利用对静水问题和溃坝流问题的模拟计算,对比分析选用不同自由表面判别法得到的数值计算结果,揭示粒子识别精度对压力计算的重要影响。研究结果表明:新提出的压力判别法和填充率判别法可以有效地提高自由表面粒子的识别精度,减轻压力计算中的非物理压力振荡现象,从而提高压力计算的稳定性以及整体数值计算的模拟精度。     

垃圾焚烧——国外垃圾处理技术的新进展

伴随城市的发展,城市垃圾已成为危害城市环境的一大公害,有效处理城市垃圾是衡量一个国家或城市文明程度的显著标志。垃圾焚烧供热和发电是一种被广泛采用的处理方式。作者介绍了目前国外一些垃圾焚烧供热发电的情况,特别从燃烧系统、炉膛设计、通风系统及过热器、空气洁净系统等几方面详细介绍了里斯本垃圾发电厂所采用的工艺技术和设计特点。     

Study of boron behaviour in two Spanish coal combustion power plants

A full-scale field study was carried out at two Spanish coal-fired power plants equipped with electrostatic precipitator (ESP) and wet flue gas desulfurisation (FGD) systems to investigate the distribution of boron in coals, solid by-products, wastewater streams and flue gases. The results were obtained from the simultaneous sampling of solid, liquid and gaseous streams and their subsequent analysis in two different laboratories for purposes of comparison. Although the final aim of this study was to evaluate the partitioning of boron in a (co-)combustion power plant, special attention was paid to the analytical procedure for boron determination. A sample preparation procedure was optimised for coal and combustion by-products to overcome some specific shortcomings of the currently used acid digestion methods. In addition boron mass balances and removal efficiencies in ESP and FGD devices were calculated. Mass balance closures between 83 and 149% were obtained. During coal combustion, 95% of the incoming boron was collected in the fly ashes. The use of petroleum coke as co-combustible produced a decrease in the removal efficiency of the ESP (87%). Nevertheless, more than 90% of the remaining gaseous boron was eliminated via the FGD in the wastewater discharged from the scrubber, thereby causing environmental problems.     

利用循环流化床锅炉燃烧技术处理造纸亚铵黑液

循环流化床燃烧技术是一种低温(900℃)流化态燃烧技术,可以燃烧低发热值的生物质燃料.采用循环流化床低温燃烧和分段燃烧技术,通过锅炉尾部凝汽换热设备将黑液加热浓缩,这样既可满足循环流化床锅炉燃烧的条件,又使得脱硫效率提高,SO2的生成量降低,且使各项排放指标均能达到环保排放标准.对比国内外造纸黑液处理办法,我们得出了利用循环流化床锅炉燃烧技术处理亚铵黑液的可行性.对于我国现阶段的小型造纸厂,该技术具有一定的推广应用价值.     

160 h of chemical-looping combustion in a 10 kW reactor system with a NiO-based oxygen carrier

Chemical-looping combustion, CLC, is a technology with inherent separation of the greenhouse gas CO₂. The technique uses an oxygen carrier made up of particulate metal oxide to transfer oxygen from combustion air to fuel. In this work, an oxygen carrier consisting of 60% NiO and 40% NiAl₂O₄ was used in a 10 kW CLC reactor system for 160 h of operation with fuel. The first 3 h of fuel operation excepted, the test series was accomplished with the same batch of oxygen carrier particles. The fuel used in the experiments was natural gas, and a fuel conversion to CO₂ of approximately 99% was accomplished. Combustion conditions were very stable during the test period, except for the operation at sub-stoichiometric conditions. It was shown that the methane fraction in the fuel reactor exit gas was dependent upon the rate of solids circulation, with higher circulation leading to more unconverted methane. The carbon monoxide fraction was found to follow the thermodynamical equilibrium for all investigated fuel reactor temperatures, 660–950 °C. Thermal analysis of the fuel reactor at stable conditions enabled calculation of the particle circulation which was found to be approximately 4 kg/s, MW. The loss of fines, i.e. the amount of elutriated oxygen carrier particles with diameter <45 μm, decreased during the entire test period. After 160 h of operation the fractional loss of fines was 0.00022 h⁻¹, corresponding to a particle life time of 4500 h.     

分解炉分级燃烧降氮脱硝技术的研究与应用

低NOx高温燃烧技术与大容积分解炉系统有机结合，具有热效率高、分解炉温度分布均匀、降氮脱硝、NOx排放浓度低等特点。文章介绍了高温分级燃烧技术在水泥窑中的应用，重点分析了分级燃烧、降氮脱硝在分解炉系统中的应用原理，以及推广的价值。     

对一次高炉煤气燃烧放散过程可吸入颗粒物浓度变化情况的分析

通过对环境空气中可吸入颗粒物浓度监测数据在一次高炉煤气燃烧放散过程中变化情况的分析,得出特殊的局地地形条件和局部地面气象条件可能造成污染物汇集和积累的结论,并就此提出高炉煤气燃烧放散时污染控制的建议。     

燃煤二氧化硫控制技术应用概况

由燃煤引起的二氧化硫污染已成为大气环境中最主要的污染因子。为解决这个问题，我国结合国外的技术成果，进行了各种脱硫技术的研究。介绍了各种治理技术应用情况，并结合实际经验对其中应注意的问题给予评述。     

Review of efficiencies of cogeneration units using internal combustion engines

The most frequently used technology in cogeneration units up to 10 MWe are internal combustion engines and the majority of the models are up to 500 kWe. There are dozens of reciprocating internal combustion engine–based cogeneration unit manufacturers and more than hundred suppliers in the market. In the article, data from supplier technical specifications of 583 units (34 manufacturers) is collected and analyzed. The authors proposed mathematical relations that show dependence of efficiencies on electric power that can be used for initial feasibility studies. Authors also have showed that value of 0.75 for power-to-heat ratio (proposed by EU Directive 2004/8/EC) does not always correspond to current market situation.     

我国石化企业电站石油焦燃烧方式研究

定量分析了高硫石油焦燃烧中SO2排放浓度以及必需的脱硫深度，指出石油焦与煤在循环流化床锅炉中混烧是适合我国国情的方案。     

A Novel Solar Thermal Cycle with Chemical Looping Combustion

In this paper, we have proposed a thermal cycle with the integration of chemical-looping combustion and solar thermal energy with the temperature of about 500-600°C. Chemical-looping combustion may be carried out in two successive reactions between a reduction of hydrocarbon fuel with metal oxides and a reduced metal with oxygen in the air. This loop of chemical reactions is substituted for conventional combustion of fuel. Methane as a fuel and nickel oxides as an oxygen carrier were employed in this cycle. Collected high-temperature solar thermal energy is provided for the endothermic reduction reaction. The feature of the proposed cycle is investigated through Energy-Utilization Diagram methodology. As a result, at the turbine inlet temperature of 1200°C, the exergy efficiency of the proposed cycle would be expected to be about 4 percentage points higher than that of a conventional gas turbine combined cycle. Compared to the previous study of chemical-looping combustion energy systems, the proposed cycle with the integration of green energy and traditional hydrocarbon fuels will offer the possibility of both greenhouse gas mitigation, with green energy, and a new approach to the efficient use of solar energy.