Cooperative inclusion of sodium 1-pyrenesulfonate by γ-cyclodextrin

Summary The interaction of -cyclodextrin(-CD) with sodium 1-pyrenesulfonate(PS) was studied spectrophotometrically. -CD was found to cause much larger decrease in the absorption maxima of PS than -CD. The fluorescence spectra of PS in the presence of -CD showed excimer emission, while those of PS with -CD showed only monomer emission, indicating that -CD forms 12 (-CDPS) complexes in which two PS molecules are included in the -CD cavity in a face-to-face fashion. The binding isotherm showed a sigmoidal curve. The association constants were estimated by computer simulation of the binding curve. The 12 (CDPS) complex was found to be much more stable (K=10⁶ M^–1) than the 11 complex (K=1 M^–1). At high concentration of -CD another -CD cooperates in binding two PS molecules, resulting in the formation of a 22 complex.     

Synergistic Catalysis of Carbon Dioxide Hydrogenation into Methanol by Yttria-Doped Ceria/γ-Alumina-Supported Copper Oxide Catalysts: Effect of Support and Dopant

Methanol synthesis from carbon dioxide hydrogenation was studied over ceria/-alumina- and yttria-doped ceria (YDC)/-alumina-supported copper oxide catalysts to seek insight into the catalysis at metal–support interfaces. It was found that, in comparison with Cu/-Al₂O₃, the Cu/CeO₂/-Al₂O₃ and Cu/YDC/-Al₂O₃ catalysts exhibited substantial enhancement in activity and selectivity toward methanol formation. The extent of enhancement was augmented by increased ceria loading on -alumina and with increased yttria doping into ceria. The enhancement is inferred to result from the synergistic effect between copper oxide and surface oxygen vacancies of ceria.     

Lean NOx catalysis over alumina‐supported catalysts

aluminasupported catalysts show promise as lean NO_x catalysts. The role of alumina in influencing the structural and chemical properties of the active phase supported on it is discussed using some effective aluminabased lean NO_x catalysts. These include Ag/Al₂O₃, CoO_x/Al₂O₃ and SnO₂/Al₂O₃. Alumina plays an important role in stabilizing Ag in the oxidic phase and cobalt in the 2+ oxidation state. For SnO₂/Al₂O₃, alumina increases the SnO₂ surface area. On both Ag/Al₂O₃ and SnO₂/Al₂O₃, alumina also participates actively in the NO_x reduction reaction. An active organic intermediate is formed on Ag or Sn oxide which reacts with NO_x subsequently on alumina to form N₂.     

Theoretical conformational analysis of poly(val-pro-gly-gly) with cis peptide bond at val-pro portion

Summary Theoretical conformational analysis was carried out for Ac-(Val-Pro-Gly-Gly) ₆-NHMe with cis peptide bond at Val-Pro portion. A right-handed ^11.6-helix was found as the lowest-energy helical conformation for this polypeptide with cis peptide bond. The energy difference between ^11.6-helix and -helix, which is the lowest-energy helical conformation with trans peptide bond, is 3.08 kcal/mol per repeating unit(Val-Pro-Gly-Gly sequence). This value almost corresponds to the energy difference between the most stable cis and trans conformations of Ac-Val-Pro-Gly-Gly-NHMe (2.75 kcal/mol). Obtained results indicate that -helix is the most stable helical conformation of poly(Val-Pro-Gly-Gly) which is a model polypeptide of elastin, and also that relative stabilities of trans and cis conformations of polypeptide are essentially estimated by short-range interactions.     

Catalytic oxidation of methanol to methyl formate over silver – a new purpose of a traditional catalysis system

Catalytic reaction was performed in the unregarded temperature region over silver catalysts with long catalytic lifetime for the conversion of methanol to methyl formate. O-saturated or O-saturated silver catalysts were studied individually to identify the roles of O, O in the oxidative esterification of methanol over an unsupported polycrystalline silver catalyst. A synergic process is proposed based on the coexistence of -oxygen species and -oxygen species on the surface of polycrystalline silver at about 573 K.     

Dynamic mechanical properties of crosslinked polyisoprene under deformation

Summary Molecular motions of elastomers under deformations were observed through dynamic mechanical measurements. Composite master curves of dynamic moduli E and E and loss tangent tan over a wide range of frequency and in a state of elongation were obtained by the time-temperature superposition procedure. It is found that both moduli increase with strain, . The slope of the dispersion curve of E become more gradual with the increase in , while that of E is almost unchanged. The increment of E is generally larger than that of E, which does not agree with the N. W. Tschoegl prediction, E ^* ()=f() E _o ^* (), where E ^* () and E _o ^* () are complex moduli at the strain of and O, respectively, and f() is the function of only . The difference in the strain dependence of E from E was found to correspond to the strain dependence of the equilibrium modulus.     

Corrosion inhibition of copper in near neutral aqueous solutions by gamma-pyrodiphenone

The inhibition effect of gamma-pyrodiphenone (PD) on copper corrosion in near neutral sulphate solutions was investigated. Weight loss and polarization measurements show a high inhibition efficiency (>96%) of PD on copper corrosion at extremely low concentrations. PD suppresses active copper dissolution and oxygen reduction. The potentiodynamic cathodic reduction measurements showed an inhibition of oxide formation and stabilization of the Cu2O oxide in the presence of PD. XPS measurements suggested that the high inhibition effect of PD on copper corrosion is due to the adsorption of PD molecules, as a first stage, and the formation of a film with a polymer-like structure by coordination of PD with Cu2O on prolonged exposure.     

The photochromism of nitrospiropyran included in γ-cyclodextrin

Summary The inclusion compounds of 1, 3, 3-trimethyl-6-nitrospiro-[2H, 1-benzo-pyran-2, 2-indoline] (NSP) with -cyclodextrin (-CD), 2,3,6,0-permethylated -CD (-MCD), and naphthyl modified -CD (-NCD) showed normal photochromism in the solid state with high light sensitivity comparable with that of NSP dispersed in polymer matrices. This is in sharp contrast with NSP in the crystalline state, which is much less photosensitive. These results suggest that the host cavity offers a sufficient free volume for phototransformation of the guest molecule. The colored form of the inclusion compounds were found to be more stable both chemically upon prolonged UV irradiation and thermally in the dark as compared with that in a PMMA film.     

Textural and structural studies on nickel hydroxide electrodes. II. Turbostratic nickel (II) hydroxide submitted to electrochemical redox cycling

The textural and structural modifications involved in electrochemical redox cycling of turbostratic nickel (II) hydroxide has been investigated using X-ray diffraction and electron microscopy methods. It was found that during the first cycles, different phenomena compete: redox reactions which occur in the solid state, and ageing reactions via the solution. For the first galvanostatic charge performed at the C/5 rate in 4.5 N KOH, the direct oxidation of (II) to (III) and the ageing of (II) to (II) via the solution followed by the oxidation to (III) are in competition. The study of the discharge mechanism shows that the direct reduction (III)(II) is parallel to the reduction (III)(II) and the ageing of the turbostratic hydroxide via the solution. After the first cycle it was established that the alpha-generated (II) active phase consisted of a mixture of two kinds of particles, the oxidation of which follows two paths: (II)/(III) for the thicker particles and for the thinner (II)/(III), but these latter (II) particles aged via the solution by Oswald ripening and the (II)/(III) couples swung to (II)/(III).     

Reduction of NO by H2 and CO on PdO-MoO3/γ-Al2O3 of low molybdena loading

The activity and selectivity in the catalytic reduction of NO by a mixture of CO and H₂ of three PdO-MoO₃/-Al₂O₃ catalysts are compared in the presence of varying amounts of oxygen at reaction temperatures from 100 to 550°C. The catalysts were prepared by different methods and contain about 2% Mo and 2% Pd. Results are compared with those for PdO/-Al₂O₃, PdO-MoO₃/-Al₂O₃ containing 2% Pd and 20% Mo, and a commercial Pt-Rh catalyst. The PdO-MoO₃/-Al₂O₃ catalysts are more active for the selective reduction of NO to N₂ and N₂O than PdO/-Al₂O₃ under slightly oxidizing conditions at temperatures from 300 to 550°C. At these reaction conditions, the fresh PdO-MoO₃/-Al₂O₃ catalysts are comparable with a commercial Pt-Rh catalyst. The improved activity of PdO-MoO₃/-Al₂O₃ relative to PdO/-Al₂O₃ is believed to be due to the interaction between Pd and Mo. The effect of O₂ on the activity and selectivity of these catalysts is different in the reduction of NO by H₂, by CO, and by a mixture of H₂ and CO. The results using the mixture of reductants cannot be inferred from the results with the single reductants.     

Biosynthesis and chemical modification of poly(γ-glutamic acid)

Summary The water soluble poly(-glutamic acid) (-PGA) was synthetized by bacteria. A series of new, less water soluble -esters were prepared by repeated esterification.The characterization of the resulted polymers was performed by 200 MHz ¹H and 75.4 MHz ¹³C NMR spectroscopy.     

High resolution transmission electron microscopic (HRTEM) determination of the preferentially exposed faces onγ-Al2O3 andη-Al2O3

High resolution transmission electron microscopy has been used to examine the crystallites in -Al₂O₃ and -Al₂O₃. -Al₂O₃ has been found to be nearly hexagonally shaped crystallites whose identity distances and angles of fringe patterns indicate that (110) planes are preferentially exposed. -Al₂O₃ showed preferentially exposed surfaces of (100), (110) and super imposed (111)/(211). This information is valuable to the catalyst researcher trying to model the surfaces of these two supports.     

Molecular mechanics studies of model polysilanes

A molecular mechanics study of a homologous series of di-substituted polysilane model compounds investigates the effect ofn-alkyl side-chain substituent length on overall polymer conformation. Using the recently released MM3 program to probe backbone and side-chain energetics, the results suggest that an off-trans (160°) backbone structure is optimal in both longer-side chain (i.e., di-n-hexyl) and shorter-side chain (di-ethyl) polysilanes. Also a chair-like conformation for side-chain dihedral angles is preferred.This paper is from the Second International Topical Workshop, Advances in Silicon-Based Polymer Science.     

The influence of sulfur dioxide on propane oxidation activity over supported platinum and palladium

Earlier studies have shown that sulfur dioxide and metal-support interaction can strongly influence propane oxidation over platinum. In particular, oxidation activity is enhanced when platinum is supported on sulfated -alumina or zirconia compared to -alumina. Therefore, it is of interest to compare the performance of palladium under the same experimental conditions. Four model catalysts were examined: Pt/-alumina, Pt/zirconia, Pd/-alumina and Pd/zirconia. The metal loading was kept at or below 0.05 wt% to emphasize changes in activity attributable to metal-support interaction. Reaction rates were measured with and without sulfur dioxide. Surface sulfation was analyzed by measuring acid strength and evaluating spectra obtained by Fourier-transform infrared spectroscopy. In contrast to platinum, sulfation does not promote propane oxidation on Pd/-alumina, and Pd/zirconia is less active than Pd/-alumina.     

Highly active rare earth catalysts for the solution polymerization of ε-caprolactone

Summary By using -butyrolactone (-BL) as the reaction media, highly active catalysts--light rare earth chloride-epoxidy---BL-for the solution polymerization of -caprolactone, have been obtained for the first time. With these catalyst, PCL with molecular weight as his as 40x10⁴(Mv) can be prepared at 60°C for 1.5 hr. The amount of epoxide in catalyst solution, catalyst aging temperature and time affect the catalyst activity significantly. The mechanism study shows that in -BL, the weakening of Ln-Cl bonds by the donation of coordinated -BL with Ln³⁺ and the homogenous effect promote the reaction between light rare earth chloride and epoxide. The produced rare earth alkoxide initiates CL polymerization via a coordination-insertion mechanism with Acyl-oxygen bond cleavage.     

Electrochemical behaviour of viologen-cyclodextrin inclusion complexes. The case of non-alkyl group substituted viologen

The electrochemical behavior of non-alkyl substituted viologen, 4,4-dibenzyl bipyridinium (BzV), 4,4-dicyanophenyl bipyridinium (CyV) and -,-,-cyclodextrin (, , -CD) was studied using cyclic voltammetry and a spectroelectrochemical method. It was found that BzV and Fe(CN) ₆ ^4– formed a charge-transfer (CT) complex with a ratio of 21 and the colour of the solution faded with the addition of an electrolyte. This behaviour is the same as in then-heptyl viologen and ferrocyanide system [1]. BzV, -CD and -CD formed an inclusion complex only in the reduced state, whilst BzV and -CD formed an inclusion complex in both the oxidized and the reduced state. An EC scheme in which a chemical reaction follows an electrochemical reaction was considered to predominate in the BzV and -, -CD systems, while a CE scheme in which a chemical reaction preceded an electrochemical reaction predominated in the BzV and -CD system. On the other hand, CyV was found to form an inclusion complex with -, -, -CD in both the oxidized and the reduced states. therefore a CE scheme was considered to predominate in the CyV--, -, -CD systems.     

Synthesis and characterization of three-branched star-like poly(γ-benzyl-l-glutamate)

Summary Three branched star-like poly(-benzyl-l-glutamate) was synthesized using three functional amine as an initiator, and characterized through light-scattering, ORD and intrinsic viscosity measurements. Experimental results suggest that the synthesized star-like poly(-benzyl-l-glutamate)s are composed of three branches of equal length.     

Temperature programmed oxidation of Cu/ZnO catalysts with N2O: an attempt for characterization of copper catalysts

For characterization of the surface structure of metallic copper formed on the support, temperature programmed oxidation (TPO) with N₂O was carried out over various Cu/ZnO catalysts. Four peaks of the N₂ formation (, , and ) were observed at 223, 400, 545 and 600 K in the TPO runs. The average copper crystallite size estimated from the sum of the amount of - and -peaks agreed fairly with those determined by X-ray diffraction and transmission electron microscopy. It was concluded that - and -peaks resulted from the oxidation of metallic copper atoms on the steps, corners and/ or defect sites, and on the flat sites of the surface of copper crystallites, respectively, while - and -peaks resulted from the bulk oxidation of copper.     

Surface interaction model ofγ-alumina-supported metal oxides

An incorporation model has been proposed and used to discuss the interaction between various metal oxides and -alumina. The dispersion capacities of various metal oxides are predicted and the surface hydroxyl group density on -alumina estimated, based on the assumption that the (110) plane is preferentially exposed on the surface of -alumina. These results are in good agreement with the available experimental data.     

Molybdenum nitride for the direct decomposition of NO

The physico-chemical properties of passivated -Mo₂N have been investigated. The material showed high activities for NO direct decomposition: nearly 100% NO conversion and 95% N₂ selectivity were achieved at 450C. The amount of O₂ taken up by -Mo₂N increased with temperature rise and reached 3133.9 molg^–1 at 450C; we conclude that there formation of Mo₂O_xN_y occurred. This oxygen-saturated -Mo₂N material was catalytically active: NO conversion and N₂ selectivity were 89 and 92% at 450C. We found that by means of H₂ reduction at 450C, Mo₂O_xN_y could be reduced back to -Mo₂N and the oxidation/reduction cycle is repeatable; such a behaviour and the high oxygen capacity (3133.9 molg^–1) of -Mo₂N suggest that -Mo₂N is a promising catalytic material for automobile exhaust purification.