Synthesis and characterization of alkali‐modified styrene‐maleic anhydride copolymer for dispersion of TiO2

A copolymer of styrene and maleic anhydride was synthesized by free radical polymerization at 80°C using N,N‐dimethylformamide (DMF) as solvent and benzoylperoxide as initiator. The monomer feed ratio of styrene to maleic anhydride was varied in the range of 1 : 1 : to 3 : 1. The polymer yield was found to decrease with increase in styrene in the feed. The molecular weight of copolymers which were formed by taking styrene to maleic anhydride ratio of 1 : 1, 2 : 1, and 3 : 1, as determined by Ostwald Viscometery were about 1862, 2015, and 2276 respectively. The acid values of abovementioned three copolymers were found to be 480, 357, and 295, respectively. The typical viscosity values of 20% solids in ammonical solution of copolymers formed by taking feed ratios of Sty : MAn as 1 : 1 and 2 : 1 were 26 and 136 cp, respectively. For the feed ratio 3 : 1, a gel was formed. The synthesized copolymers were hydrolyzed by alkalis, namely, NaOH, KOH, and NH₄OH. The dispersing ability of hydrolyzed styrene‐maleic anhydride (SMA) copolymers for dispersion of titanium dioxide was studied. The modified SMA copolymers were found to be effective dispersants for TiO₂. Among the three alkalis studied, the Sodium salts of SMA were found to give better dispersion. The copolymer having a 1 : 1 feed ratio showed the best dispersing ability for TiO₂ particles among the three ratios studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3194–3205, 2007     

Variations of the glass‐transition temperature in the imidization of poly(styrene‐co‐maleic anhydride)

The imidization of poly(styrene‐co‐maleic anhydride) (SMA) was conducted, and the glass‐transition temperatures (T_g's) of the resulting products were measured with differential scanning calorimetry. The contributions from functional groups of maleic anhydride, N‐phenylmaleamic acid, and N‐phenylmaleimide to T_g were examined. T_g increased in the order of SMA < styrene–N‐phenyl maleimide copolymer < styrene–N‐phenyl maleamic acid copolymer and followed the Fox equation. T_g of the imidized products of SMA could be controlled by the conversions of both ring‐opening and ring‐closing reactions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2418–2422, 2007     

Synthesis of ultrafine poly(styrene‐maleic anhydride) and polystyrene fibers by electrospinning

Fiber formation from atactic polystyrene (aPS) and alternating poly(styrene‐maleic anhydride) (PSMA) synthesized by free radical polymerization (AIBN, 90°C, 4 h) were investigated by electrospinning from various solutions. aPS was soluble in dimethylformamide (DMF), tetrahydrofuran (THF), toluene, styrene, and benzene, whereas PSMA was soluble in acetone, DMF, THF, dimethylsulfoxide (DMSO), ethyl acetate, and methanol. aPS fibers could be electrospun from 15 to 20% DMF and 20% THF solutions, but not from styrene nor toluene. PSMA, on the other hand, could be efficiently electrospun into fibers from DMF and DMSO at 20 and 25%, respectively. Few PSMA fibers were, however, produced from acetone, THF, or ethyl acetate solutions. Results showed that solvent properties and polymer–solvent miscibility strongly influenced the fiber formation from electrospinning. The addition of solvents, such as THF, generally improved the fiber uniformity and reduced fiber sizes for both polymers. The nonsolvents, however, had opposing effects on the two polymers, i.e., significantly reducing PSMA fiber diameters to 200 to 300 nm, creating larger and irregularly shaped aPS fibers. The ability to incorporate the styrene monomer and divinylbenzene crosslinker in aPS fibers as well as to hydrolyze PSMA fibers with diluted NaOH solutions demonstrated potential for post‐electrospinning reactions and modification of these ultrafine fibers for reactive support materials. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Comparison of styrene reversible addition–fragmentation chain‐transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene‐alt‐maleic anhydride) and sodium dodecyl sulfate

In this study, we conducted the reversible addition–fragmentation chain‐transfer (RAFT) polymerization of styrene (St) in a miniemulsion system stabilized by two different stabilizers, ammonlysis poly(styrene‐alt‐maleic anhydride) (SMA) and sodium dodecyl sulfate (SDS), with identical reaction conditions. The main objective was to compare the polymerization kinetics, living character, latex stability, and particle morphology. The macro‐RAFT agent used in both systems was SMA, which was obtained by RAFT solution polymerization mediated by 1‐phenylethyl phenyldithioacetate. The experimental results show that the St RAFT miniemulsion polymerization stabilized by SDS exhibited a better living character than that stabilized by ammonlysis SMA. The final latices were very stable in two systems, but different stabilizers had an obvious effect on the polymerization kinetics, living character, and particle morphology. All of the particles obtained by RAFT miniemulsion polymerization stabilized by SDS were solid, but an obvious core–shell structure was observed in the miniemulsion system stabilized by ammonlysis SMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polymer blends of PET–PS compatibilized by SMA and epoxy dual compatibilizers

Poly(ethylene terephthalate) (PET) and polystyrene (PS) are immiscible and incompatible and have been well recognized. In this study, styrene maleic anhydride random copolymer (SMA–8 wt % MA) and tetra-glycidyl ether of diphenyl diamino methane (TGDDM) are employed as reactive dual compatibilizers in the blends of PET–PS. The epoxy functional groups of the TGDDM can react with PET terminal groups ( OH and  COOH) and anhydride groups of SMA at the interface to produce PET-co-TGDDM-co-SMA copolymers. SMA with low MA content is miscible with PS, whereas the PET segments are structurally identical with PET phase. Therefore, these in-situ-formed copolymers tend to anchor at the interface and act as effective compatibilizers of the blends. The compatibilized blends, depending on the amounts of TGDDM and SMA addition, result in smaller phase domain, higher viscosity, and improved mechanical properties. This study demonstrates that SMA and TGDDM dual compatibilizer can be utilized effectively in compatibilizing polymer blends of PET and PS. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2029–2040, 1999     

Preparation and characterization of thermally conductive polystyrene/carbon nanotubes composites

Thermally conductive polystyrene (PS)/multi‐walled carbon nanotubes (MWNTs) nanocomposites was prepared through a simple solution‐evaporation method assisted by ultrasonic irradiation. To enhance the dispersion of MWNTs in PS, MWNTs were chemically functionalized with poly(styrene‐co‐maleic anhydride) (SMA) (MWNT‐g‐SMA), which had benzene group and exhibited strong affinity with PS. The thermal conductive properties of PS increased and the mechanical properties decreased in presence of MWNTs, while by addition of MWNT‐g‐SMA, the properties of the composites can be improved to some extent. The thermal conductivity can reach 0.89 W/m K for the composite with 33.3 vol % MWNT‐g‐SMA, which was four times higher than that of neat PS. A linear increase of the thermal conductivity was observed with increasing MWNTs‐g‐SMA content, and the Maxwell–Eucken model and the Agari model were used for theoretical evaluation. Compared with MWNT‐OH, MWNT‐g‐SMA with larger diameter exhibited diffused boundary with the PS matrix, resulting from the strong interfacial bonding of the two phases. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synergistic effect of dual rubber system in toughening styrene maleic anhydride copolymers

Styrene maleic anhydride (SMA) copolymers were toughened by blending with two distinctly different rubber modifiers: styrene‐butadiene‐styrene (SBS) block copolymer and methacrylated butadiene‐styrene emulsion‐made graft copolymer (MBS). The modifiers were used both individually and in combination for the examination of their roles in toughening SMA. SMA was miscible with poly(methylmethacrylate) shell of MBS, whereas it was partially miscible with the polystyrene (PS) phase of SBS. When 40–50% of SBS was used in blends, the PS phase of SBS became immiscible with SMA. SBS did not improve the Izod impact strength of SMA appreciably. A prominent synergistic toughening effect was experimentally observed when SBS and MBS were used in combination in brittle SMA. This effect may be attributed to the fact that the large SBS particles initiate crazes and small MBS particles with good adhesion to SMA matrix improve the ligament thickness, which may play a critical role in craze growth and termination. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2260–2267, 2003     

Direct polymer reaction of poly(styrene‐co‐maleic anhydride): Polymeric imidization

Using direct polymer reaction of poly(styrene‐co‐maleic anhydride) (SMA), a synthesis of copolymer of styrene and N‐aryl succinimide (SMI) has been investigated. SMI copolymers were synthesized from SMA copolymers by a concerted two‐step reaction, which consisted of the condensation reaction (step 1) of SMA with aromatic amine to prepare a precursor, succinamic acid, for imide formation and the cyclodehydration reaction (step 2) of succinamic acid. In this article, the application of Searle's preparation method of N‐aryl or N‐alkyl maleimide to the direct polymer reaction for SMI was attempted. Compared with synthesis of monomeric imides, the imide formation in polymeric condition appeared to be a little more sensitive to the reaction condition. The optimum condition for maximum conversion was examined in terms of time, temperature, and the amount of reactants. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1187–1196, 1999     

Synthesis and characterization of polystyrene/poly(4‐vinylpyridine) triblock copolymers by reversible addition–fragmentation chain transfer polymerization and their self‐assembled aggregates in water

Reversible addition–fragmentation chain transfer polymerization (RAFT) was developed for the controlled preparation of polystyrene (PS)/poly(4‐vinylpyridine) (P4VP) triblock copolymers. First, PS and P4VP homopolymers were prepared using dibenzyl trithiocarbonate as the chain transfer agent (CTA). Then, PS‐b‐P4VP‐b‐PS and P4VP‐b‐PS‐b‐P4VP triblock copolymers were synthesized using as macro‐CTA the obtained homopolymers PS and P4VP, respectively. The synthesized polymers had relatively narrower molecular weight distributions (M_w/M_n < 1.25), and the polymerization was controlled/living. Furthermore, the polymerization rate appeared to be lower when styrene was polymerized using P4VP as the macro‐CTA, compared with polymerizing 4‐vinylpyridine using PS as the macro‐CTA. This was attributed to the different transfer constants of the P4VP and PS macro‐CTAs to the styrene and the 4‐vinylpyridine, respectively. The aggregates of the triblock copolymers with different compositions and chain architectures in water also were investigated, and the results are presented. Reducing the P4VP block length and keeping the PS block constant favored the formation of rod aggregates. Moreover, the chain architecture in which the P4VP block was in the middle of the copolymer chain was rather favorable to the rod assembly because of the entropic penalty associated with the looping of the middle‐block P4VP to form the aggregate corona and tailing of the end‐block PS into the core of the aggregates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1017–1025, 2003     

Kinetics and simulation of the imidization of poly(styrene‐co‐maleic anhydride) with amines

The imidization of poly(styrene‐co‐maleic anhydride) with amines may improve some of its end‐use properties. The objective of this study was to examine the mechanism and kinetics with aniline (ANL) as an amine of the preparation of poly(styrene‐co‐N‐phenyl maleimide). The reaction was carried out in a tetrahydrofuran solution at 25–55°C and in an ethylbenzene solution at 85–120°C. The extent of the reaction was determined by conductance titration, a new and simple method. Two consecutive reactions were involved in the imidization: ring opening to produce an acido‐amide group and ring closing to form a corresponding imide group. The imidization rate was greatly influenced by the reaction temperature and the molar ratio of ANL to the anhydride. A model for the imidization kinetics over a wide range of reaction temperatures and concentration ranges was developed and validated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2744–2749, 2006     

Poly(N‐hydroxyethyl acrylamide)‐b‐polystyrene by combination of ATRP and aminolysis processes

Block copolymers of very hydrophilic poly(N‐hydroxyethyl acrylamide) (PHEAA) with polystyrene (PS) were successfully synthesized by sequential atom transfer radical polymerization of ethyl acrylate (EA) and styrene monomers and subsequent aminolysis of the acrylic block with ethanolamine. Quantitative aminolysis of poly(ethyl acrylate) (PEA) block yielded poly(N‐hydroxyethyl acrylamide)‐b‐polystyrene in well‐defined structures, as evidenced by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy techniques. Three copolymers with constant chain length of PHEAA (degree of polymerization: 80) and PS blocks with 21, 74, and 121 repeating units were prepared by this method. Among those, the block copolymer with 21 styrene repeating units showed excellent micellation behavior in water without phase inversion below 100°C, as inferred from dynamical light scattering, environmental scanning electron microscopy, and fluorescence measurements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The effect of the incorporation of polystyrene‐based chain extenders on the properties of the shape memory polyurethanes

In this work, the idea of modulating the shape memory properties of polyurethanes by changing their macromolecular architecture through the incorporation of polystyrene‐based moieties was investigated. To study these effects, poly(styrene‐co‐maleic anhydride) (SMA) was incorporated during the synthesis of PU as a potential chain extender. Two sample groups were produced: (i) PU, produced with hydrazine as a chain extender and (ii) PU_SMA, produced with the addition of SMA instead of hydrazine. The results suggest that the SMA incorporation in the PU_SMA chains occurred by the reaction between NCO groups of the PU and maleic anhydride (MA) of the SMA. The presence of SMA was useful in modulating the structure of PU by reducing the soft segment crystallinity and molar mass. These changes in the structure and macromolecular architecture due to the presence of SMA moieties in PU chains led to pronounced improvements in strength, toughness, and the shape recovery ratio. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44471.     

Optimization of the property profile of poly‐L‐lactide by synthesis of PLLA‐polystyrene–block copolymers

Diblock and triblock copolymers of poly‐L ‐lactide (PLLA) and polystyrene (PS) were synthesized and the mechanical properties of these copolymers studied. Free radical polymerization of styrene in the presence of 2‐mercaptoethanol as functional chain transfer agent produced mono‐functionalized PS‐blocks which were used as macroinitiators in the subsequent ring opening polymerization (ROP) of L ‐lactide to produce the diblock copolymers. Furthermore a α‐ω‐bishydroxyl functionalized PS‐block was synthesized by RAFT, which was then engaged as bifunctional initiator for the ROP of L ‐lactide to provide the triblock copolymers PLLA‐PS‐PLLA. Through the copolymerisation and high molar masses, it was possible to achieve an improved mechanical property profile, compared with pure PLLA, or the analogous blends of PLLA and PS. A weight fraction of PS of 10–30% was found to be the optimal range for improving the heat deflection temperature (HDT), as well as mechanical properties such as ultimate tensile strength or elongation at break. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Ab initio reversible addition–fragmentation chain transfer emulsion polymerization of styrene/butyl acrylate mediated by poly(acrylic acid)‐block‐polystyrene trithiocarbonate

Ab initio reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of styrene/butyl acrylate was investigated with the trithiocarbonate macro‐RAFT agent poly(acrylic acid)‐block‐polystyrene (PAA‐b‐PS) as a stabilizer and a RAFT agent. Influences of the amount of ammonium persulfate (APS), the amount of PAA‐b‐PS and the mass ratio of monomers on emulsion polymerization and film properties are discussed. The particle morphology exhibited spherical‐like structure with particles of about 90 nm in diameter and relatively narrow particle size distribution characterized using transmission electron microscopy and dynamic laser scattering. Fourier transform infrared and ¹H NMR spectra showed that the styrene/butyl acrylate emulsion was successfully synthesized. The monomer conversion increased initially with increasing amount of APS, from 0.4 up to 0.8 wt%, and then decreased. The particle size increased and its distribution decreased gradually with increasing amount of APS. The monomer conversion increased from 76.83 to 94.21% as the amount of PAA‐b‐PS increased from 3 to 4 wt%, and then decreased with further increase of PAA‐b‐PS. The particle size decreased and its distribution increased with increasing amount of PAA‐b‐PS. The water resistance and solvent resistance of the polymer films initially increased and then decreased with decreasing mass ratio of butyl acrylate to styrene. © 2014 Society of Chemical Industry     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Synthesis of block copolymers with thermodynamically compatible chain segments: di‐ and triblock copolymers of polystyrene and poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Mono‐ and bifunctional poly(phenylene oxide) (PPO) macroinitiators for atom transfer radical polymerization (ATRP) were prepared by esterification of mono‐ and bishydroxy telechelic PPO with 2‐bromoisobutyryl bromide. The macroinitiators were used for ATRP of styrene to give block copolymers with PPO and polystyrene (PS) segments, namely PPO‐block‐PS and PS‐block‐PPO‐block‐PS. Various ligands were studied in combination with CuBr as ATRP catalysts. Kinetic investigations revealed controlled polymerization processes for certain ligands and temperature ranges. Thermal analysis of the block copolymers by means of DSC revealed only one glass transition temperature as a result of the compatibility of the PS and PPO chain segments and the formation of a single phase; this glass transition temperature can be adjusted over a wide temperature range (ca 100–199 °C), depending on the composition of the block copolymer. Copyright © 2005 Society of Chemical Industry     

Grafting of polystyrene and poly(p‐chlorostyrene) from the surface of ramie fiber via RAFT polymerization

Reversible addition‐fragmentation chain transfer (RAFT) radical polymerization was used for controlled grafting of styrene and p‐chlorostyrene from the surface of ramie fiber. The hydroxyl groups in ramie fiber were first converted to thiocarbonylthio groups as the RAFT chain transfer agent then used to mediate the RAFT polymerization of styrene, and p‐chlorostyrene in tetrahydrofuran using azobis (isobutyronitrile) as initiator at 60°C. The grafted copolymers were analyzed by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetry, and contact angle measurements. The results confirmed that grafting occurred on the surface of the ramie fiber, substantially increasing the water contact angle from 75.31° to 147° for polystyrene grafted ramie fiber (cell‐PS) and 135° for poly(p‐chlorostyrene) (cell‐PSCl), and improving the hydrophobicity of the grafted fiber. The homopolymers formed in the polymerization were analyzed by size exclusion chromatography to estimate the molecular weights and polydispersity indices (PDIs) of chains grafted from the surface of the ramie fiber, as well as showed narrow chain length distributions with a PDI of 1.32–1.70. These materials possess potential applications in many advanced technologies. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Blends of bisphenol A polycarbonate and rubber‐toughened styrene–maleic anhydride copolymers

The morphology and mechanical properties of polycarbonate (PC) blends with rubber‐toughened styrene–maleic anhydride copolymer materials (TSMA) were investigated and compared with the properties of blends of PC with acrylonitrile–butadiene–styrene (ABS) materials. The PC/TSMA blends showed similar composition dependence of properties as the comparable PC/ABS blends. Polycarbonate blends with TSMA exhibited higher notched Izod impact toughness than pure PC under sharp‐notched conditions but the improvements are somewhat less than observed for similar blends with ABS. Since PC is known for its impact toughness except under sharp‐notched conditions, this represents a significant advantage of the rubber‐modified blends. PC blends with styrene–maleic anhydride copolymer (SMA) were compared to those with a styrene–acrylonitrile copolymer (SAN). The trends in blend morphology and mechanical properties were found to be qualitatively similar for the two types of copolymers. PC/SMA blends are nearly transparent or slightly pearlescent. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1508–1515, 1999     

Liquid crystallization of poly(styrene‐co‐maleic anhydride) induced by intermolecular hydrogen bonds

The liquid crystallization of general polymer (GP) with maleic anhydride in the main chain has been realized through molecular recognition and self‐assembly based on intermolecular hydrogen bonds. Poly[styrene‐co‐(N‐4‐carboxylphenyl)maleimide] (SMIBA) was synthesized by imidization and dehydration of Poly(styrene‐co‐maleic anhydride) (SMA) with p‐aminobenzoic acid (ABA) for use as an H‐bonded donor polymer. 4‐Methoxy‐4′‐stilbazole (MSZ) and 4‐nitro‐4′‐stilbazole (SZNO₂) were prepared as an H‐bonded acceptor. SMIBA was complexed with MSZ or SZNO₂ by slow evaporation from pyridine solution to form a self‐assembly, which exhibits the mesophase, while neither of the individual components is mesogenic. The phase diagrams of a variety of mixtures between of SMIBA and stilbazoles have been established using DSC and POM. They show complete miscibility and high thermal stability of the liquid crystalline phase over the whole composition range. The tuning of liquid crystalline properties was achieved by changing the composition of the mixture and involving it with a mixture of SZNO₂ and MSZ. IR measurements strongly support the existence of an H‐bonded complex between the carboxylic acid of SMIBA and the pyridine group of stibazoles. Unlike conventional side‐chain liquid crystalline polymer (SLCP), supramolecular SLCP with a lower molecular weigh polymeric donor has higher thermal stability of the liquid crystalline phase due to the microphase separated in the hydrogen bonding case. Liquid crystallization of GP, such as SMA, induced by hydrogen bonds, offers a new route to prepare functional material with controlled molecular architecture from readily accessible and simpler precursors. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 97–105, 1999     

Preparation of flexible and transparent SMA films by simple composite with MBS potential for negative birefringence compensator

The brittleness of poly(styrene maleic anhydride) (SMA) was improved by compositing with elastic poly(methyl methacrylate‐butadiene‐styrene) (MBS) to develop it into optical film. Transparent and flexible SMA films were prepared, and the flexibility of them was checked by folding endurance test and folding bend. The transparence of SMAMBS films were proved by the transmittance and haze measurements. In actual view, the letters could be clearly observed while they were covered by prepared films. The thermal stability of them was confirmed by DSC and TGA analysis. These physical properties of films are comparable to that of polycarbonate which is widely used as optical film. Besides of these, mechanical and fracture properties of them were found to be also suitable for this purpose. Furthermore, negative birefringence could be obtained by orientationally stretching them. Such results indicate that, films prepared from composites are competent for negative birefringence optical compensator in the field of liquid crystal display. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011