Well‐controlled ATRP of 2‐(2‐(2‐azidoethyoxy)ethoxy)ethyl methacrylate for high‐density click functionalization of polymers and metallic substrates

The combination of atom transfer radical polymerization (ATRP) and click chemistry has created unprecedented opportunities for controlled syntheses of functional polymers. ATRP of azido‐bearing methacrylate monomers (e.g., 2‐(2‐(2‐azidoethyoxy)ethoxy)ethyl methacrylate, AzTEGMA), however, proceeded with poor control at commonly adopted temperature of 50 °C, resulting in significant side reactions. By lowering reaction temperature and monomer concentrations, well‐defined pAzTEGMA with significantly reduced polydispersity were prepared within a reasonable timeframe. Upon subsequent functionalization of the side chains of pAzTEGMA via Cu(I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) click chemistry, functional polymers with number‐average molecular weights (M_n) up to 22 kDa with narrow polydispersity (PDI < 1.30) were obtained. Applying the optimized polymerization condition, we also grafted pAzTEGMA brushes from Ti6Al4 substrates by surface‐initiated ATRP (SI‐ATRP), and effectively functionalized the azide‐terminated side chains with hydrophobic and hydrophilic alkynes by CuAAC. The well‐controlled ATRP of azido‐bearing methacrylates and subsequent facile high‐density functionalization of the side chains of the polymethacrylates via CuAAC offers a useful tool for engineering functional polymers or surfaces for diverse applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1268–1277     

Insertion Homo‐ and Copolymerization of Diallyl Ether

The previously unresolved issue of polymerization of allyl monomers CH₂?CHCH₂X is overcome by a palladium‐catalyzed insertion polymerization of diallyl ether as a monomer. An enhanced 2,1‐insertion of diallyl ether as compared to mono‐allyl ether retards the formation of an unreactive five‐membered cyclic O‐chelate (after 1,2‐insertion) that otherwise hinders further polymerization, and also enhances incorporation in ethylene polymers (20.4 mol %). Cyclic ether repeat units are formed selectively (96 %–99 %) by an intramolecular insertion of the second allyl moiety of the monomer. These features even enable a homopolymerization to yield polymers (poly‐diallyl ether) with degrees of polymerization of DP_n≈44.     

Facile synthesis of soluble aromatic poly(amide amine)s via C–N coupling reaction: Characterization,thermal, and optical properties

Aromatic poly(amide amine)s (APAAs), as novel high‐performance polymers, have been obtained by the condensation polymerization of N,N'‐bis(4‐bromobenzoyl)‐p‐phenylenediamine with two different primary aromatic diamines via palladium‐catalyzed aryl amination reaction. The structures of the polymers are characterized by means of FTIR, ¹H NMR spectroscopy, and elemental analysis, the results show a good agreement with the proposed structures. DSC and TGA measurements exhibit that polymers possess high glass transition temperature (T_g > 240 °C) and good thermal stability with high decomposition temperatures (T₅ > 400 °C). These novel polymers also display good solubility. In addition, due to its special structure, APAA‐2 is endowed with significantly strong photonic luminescence in N,N‐dimethylformamide and good electroactivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4845–4852     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aqueous solution behavior of comb‐shaped poly(2‐ethyl‐2‐oxazoline)

A series of comb polymers consisting of a methacrylate backbone and poly(2‐ethyl‐2‐oxazoline) (PEtOx) side chains was synthesized by a combination of cationic ring‐opening polymerization and reversible addition–fragmentation chain transfer polymerization. Small‐angle neutron scattering (SANS) studies revealed a transition from an ellipsoidal to a cylindrical conformation in D₂O around a backbone degree of polymerization of 30. Comb‐shaped PEtOx has lowered T_g values but a similar elution behavior in liquid chromatography under critical conditions in comparison to its linear analog was observed. The lower critical solution temperature behavior of the polymers was investigated by turbidimetry, dynamic light scattering, transmission electron microscopy, and SANS revealing decreasing T_cp in aqueous solution with increasing molar mass, the presence of very few aggregated structures below T_cp, a contraction of the macromolecules at temperatures 5 °C above T_cp but no severe conformational change of the cylindrical structure. In addition, the phase diagram including cloud point and coexistence curve was developed showing an LCST of 75 °C of the binary mixture poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]/water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cuso4‐amine redox‐initiated radical polymerization of methyl methacrylate mediated by a CuCl2 complex: Homogeneous reverse ATRP

Kinetic results of CuSO₄/2,2'‐bipyridine(bPy)‐amine redox initiated radical polymerization of methyl methacrylate (MMA) at 70 to 90 °C in dimethylsulfoxide suggest that such initiation is characteristic of a slow rate and a low initiator efficiency, but tertiary amines exhibit a relatively higher rate. UV‐Vis spectroscopy confirms the alpha‐amino functionality of PMMA chains. CuCl₂/bPy successfully mediates the redox‐initiated radical polymerization of MMA with aliphatic tertiary amines in a fashion of slow‐initiated reverse atom transfer radical polymerization (ATRP), i.e. both the initiator efficiency of aliphatic tertiary amines and the average molecular weight of PMMA increase gradually, while the molecular weight distribution remains narrow but become broader with the conversions. As the PMMA chains contain alpha amino and omega C‐Cl moieties, UV‐induced benzophenone‐initiated radical polymerization and Cu^ICl/bPy‐catalyzed ATRP initiated from PMMA lead to block copolymers from terminal functionalities. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2562‐2578     

Synthesis of poly(ether ketone amide)s containing 4‐aryl‐2,6‐ diphenylpyridine moieties by a heterogeneous palladium‐catalyzed polycondensation of aromatic diiodides,aromatic diamines,and carbon monoxide

New aromatic poly(ether ketone amide)s containing 4‐aryl‐2,6‐diphenylpyridine units were prepared by the heterogeneous palladium‐catalyzed carbonylative polymerization of aromatic diiodides with ether ketone units, aromatic diamines bearing pyridine groups, and carbon monoxide. Polymerizations were performed in N,N‐dimethyl‐ acetamide (DMAc) at 120°C in the presence of a magnetic nanoparticles‐supported bidentate phosphine palladium complex [Fe₃O₄@SiO₂‐2P‐PdCl₂] as catalyst with 1,8‐diazabicycle[5,4,0]‐7‐undecene (DBU) as base and generated poly(ether ketone amide)s with inherent viscosities up to 0.79 dL/g. All the polymers were soluble in many organic solvents. These polymers showed glass transition temperatures between 219°C and 257°C and 10% weight loss temperatures ranging from 467°C to 508°C in nitrogen. These polyamides could be cast into transparent, flexible, and strong films from DMAc solution with tensile strengths of 86.4 to 113.7 MPa, tensile moduli of 2.34 to 3.19 GPa, and elongations at break of 5.2% to 6.9%. These polymers also exhibited good optical transparency with an ultraviolet‐visible absorption cut‐off wavelength in the 371 to 384‐nm range. Importantly, the new heterogeneous palladium catalyst can easily be recovered from the reaction mixture by simply applying an external magnet and recycled at least 8 times without significant loss of activity. Our catalytic system not only avoids the use of an excess of PPh₃ and prevents the formation of palladium black, but also solves the basic problems of palladium catalyst recovery and reuse.     

Melt polycondensation approach for reduction degradable helical polyester based on l‐cystine

Melt polycondensation approach is developed for new classes of reduction responsive disulfide containing functional polyesters based on l ‐cystine amino acid resources under solvent free process. l ‐Cystine was converted into multi‐functional ester‐urethane monomer and subjected to thermoselective transesterification at 120 °C with commercial diols in the presence of Ti(OBu)₄ to produce polyesters with urethane side chains. The polymers were produced in moderate to high molecular weights and the polymers were found to be thermally stable up to 250 °C. The β‐sheet hydrogen bonding interaction among the side chain urethane unit facilitated the self‐assembly of the polyester into amyloid‐like fibrils. The deprotection of urethane unit into amine functionality modified the polymers into water soluble cationic polyester spherical nanoparticles. The reduction degradation of disulfide bond was studied using DTT as a reducing agent and the high molecular weight polymers chains were found be chopped into low molecular weight oligomers. The cytotoxicity of cationic disulfide nanoparticle was studied in MCF‐7 cells and they were found to be biocompatible and non‐toxic to cells upto 50 μg/mL. The custom designed reduction degradable and highly biocompatible disulfide polyesters from l ‐cystine are useful for futuristic biomedical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2864–2875     

PNIPAM‐b‐(PEA‐g‐PDMAEA) double‐hydrophilic graft copolymer: Synthesis and its application for preparation of gold nanoparticles in aqueous media

A series of well‐defined double‐hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐(dimethylamino)ethyl acrylate) (PDMAEA) side chains, were synthesized by the combination of single‐electron‐transfer living radical polymerization (SET‐LRP) and atom‐transfer radical polymerization (ATRP). PNIPAM‐b‐PEA backbone was first prepared by sequential SET‐LRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system followed by the transformation into the macroinitiator by treating the pendant hydroxyls with 2‐chloropropionyl chloride. The final graft copolymers with narrow molecular weight distributions were synthesized by ATRP of 2‐(dimethylamino)ethyl acrylate initiated by the macroinitiator at 40 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system via the grafting‐from strategy. These copolymers were employed to prepare stable colloidal gold nanoparticles with controlled size in aqueous solution without any external reducing agent. The morphology and size of the nanoparticles were affected by the length of PDMAEA side chains, pH value, and the feed ratio of the graft copolymer to HAuCl₄. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1811–1824, 2009     

Straightforward preparation of polymers based on oligodimethylsiloxane and alkylamine

Novel oligodimethylsiloxane‐based polymers with alkyl side chain were synthesized in bulk by step‐growth polymerization between α,ω‐glycidyl ether oligodimethylsiloxanes and a monoalkylamine in the absence of catalyst and at temperatures ranging between 80 and 180 °C. Matrix assisted laser desorption ionization time of flight results attested for the high reactivity of the amine functions with the glycidyl groups and revealed that the main polymer structure was (A₂B₂)_n type with alkyl moieties as dangling chains. No etherification was observed during the reaction even at high temperatures and the nature of the end groups strongly depended on the molar ratio between glycidyl and amine functions. Polymerization reactions were followed by ¹H NMR and the kinetics of the glycidyl‐amine reaction pointed out the dependence of temperature, molar ratio, and the molar mass of the oligodimethylsiloxane. High conversion rates were obtained, especially with the lowest molecular weight oligodimethylsiloxane. An optimized kinetic model derived from the Horie's model was discussed and permitted to correctly fit the experimental data. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Poly(arylene ether amine)s from a Monomer Containing an Electron‐Donating Amine Group in a Nucleophilic Aromatic Substitution Reaction

Summary: Poly(arylene ether amine)s were synthesized by a nucleophilic aromatic substitution polycondensation of bis[4‐fluoro‐3‐(trifluoromethyl)phenyl]amine with several bisphenols. Even though the monomer has an electron‐donating diphenylamine moiety, which normally deactivates a nucleophilic aromatic substitution (S_NAr) reaction, the polymerization proceeded by a S_NAr reaction to give high‐molecular‐weight polymers. The polymers show good solubility in common organic solvents and have T_gs in the range of 123 °C to 177 °C.

High‐molecular‐weight poly(arylene ether amine)s synthesized by a S_NAr reaction with the monomer containing an electron‐donating diphenylamine moiety.     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Facile Synthesis of Well‐Defined Branched Sulfur‐Containing Copolymers: One‐Pot Copolymerization of Carbonyl Sulfide and Epoxide

Topological polymers possess many advantages over linear polymers. However, when it comes to the poly(monothiocarbonate)s, no topological polymers have been reported. Described herein is a facile and efficient approach for synthesizing well‐defined branched poly(monothiocarbonate)s in a “grafting through” manner by copolymerizing carbonyl sulfide (COS) with epichlorohydrin (ECH), where the side‐chain forms in situ. The lengths of the side‐chains are tunable based on reaction temperatures. More importantly, enhancement in thermal properties of the branched copolymer was observed, as the T_g value increased by 22 °C, compared to the linear analogues. When chiral ECH was utilized, semicrystalline branched poly(monothiocarbonate)s were accessible with a T_m value of 112 °C, which is 40 °C higher than that of the corresponding linear poly(monothiocarbonate)s. The strategy presented herein for synthesizing branched polymers provides efficient and concise access to topological polymers.     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

Novel active ester‐bridged copolynorbornene materials containing terminal functional hydroxyl,amino, methacryloyl,or ammonium groups via ring‐opening metathesis polymerization

Several random and block copolynorbornenes with side chains containing terminal hydroxyl, amino, methacryloyl or ammonium groups were derived from the functional alkyl ester‐containing norbornenes by ring‐opening metathesis polymerization (ROMP). The main chain of ROMP‐type polynorbornene had a more important role for glass‐transition temperature in comparison with vinyl addition polymerization. There is little effect on glass‐transition temperature (about ?39 °C) of polynorbornenes with different length of alkyl side chain. The organosoluble copolynorbornenes with active crosslinkable methylacryloyl side chains derived from functional hydroxyl group were prepared to improve the thermal stability of poly(methyl methacrylate) [decomposition temperature (T_d)^10% = 325 °C in nitrogen] by forming networked AB crosslinked polymer (T = 367 °C in nitrogen). The sizes of nanometer‐scale polymeric micelles of block copolymers having hydrophobic alkyl ester and hydrophilic ammonium groups were measured in the range of 11–25 nm by scanning electron microscopy. These polymeric materials with various functional groups or amphiphilic architectures are accessible by ROMP, whose topology makes them particularly attractive for application potential such as biomedical and photoelectric materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4233–4247, 2005     

Anionic synthesis and detection of fluorescence‐labeled polymers with a terminal anhydride group

To monitor polymer–polymer coupling reactions between two different monofunctional polymers in dilute polymer blends, fluorescence‐labeled anhydride‐functional polystyrene (PS) and poly(methyl methacrylate) (PMMA) were prepared by conventional anionic polymerization. Sequential trapping of lithiopolystyrene by 1‐(2‐anthryl)‐1‐phenylethylene (APE) and then di‐t‐butyl maleate (4) provided, after pyrolysis, anhydride‐functional fluorescent PS. Fluorescent PMMA anhydride (8) was synthesized with sec‐butyllithium/APE as an initiator for the anionic polymerization of methyl methacrylate, trapping by 4, and pyrolysis. These polymers could be reacted with amine‐functional polymers by melt blending, and the reaction progress could be monitored by gel permeation chromatography coupled with fluorescence detection. This technique not only allows monitoring of the coupling reaction with high sensitivity (ca. 100 times more sensitive than refractive index detection) but also permits selective detection because unlabeled polymers are invisible to fluorescence detection. This highly sensitive and selective detection methodology was also used to monitor the coupling reaction of 8 with PS‐NH₂ at a thin‐film interface, which was otherwise difficult to detect by conventional methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2177–2185, 2000     

Synthesis of norbornenes containing cationic mono‐ and di(cyclopentadienyliron)arene complexes and their ring‐opening metathesis polymerization

A number of classes of polynorbornenes containing cationic iron moieties within their side chains were prepared via ring‐opening metathesis polymerization with a ruthenium‐based catalyst. The iron‐containing polymers displayed excellent solubility in polar organic solvents. The weight‐average molecular weights of these polymeric materials were estimated to be in the range of 18,000–48,000. Thermogravimetric analysis of these polymers showed two distinct weight losses. The first weight loss was in the range of 204–260 °C and was due to the loss of the metallic moieties, whereas the second weight loss was observed at 368–512 °C and was due to the degradation of the polymer backbone. Cyclic voltammetry studies of the iron‐containing polymers showed that the 18 e^? cationic iron centers underwent a reduction to give the neutral 19 e^? complexes at half‐wave potential (E_1/2) = ?1.105 V. Photolysis of the metallated polymers led to the isolation of the norbornene polymers in very good yields. Differential scanning calorimetry studies showed a sharp increase in the glass‐transition temperatures up to 91 °C when rigid aromatic side chains were incorporated into the norbornene polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3053–3070, 2006