Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Synthesis and characterization of novel poly(phenylene sulfide) containing a chromophore in the main chain

A kind of novel poly(phenylene sulfide)s (PPSs) containing a chromophore group were synthesized by the reaction of dihalogenated monomer and sodium sulfide (Na₂S.xH₂O) via nucleophilic substitution polymerization under high pressure. The polymers were characterized by Fourier transform infrared spectroscopy, ultraviolet spectroscopy, fluorescence spectroscopy, XRD, DSC, TGA, mechanical testing and dissolvability experiments. The intrinsic viscosity of the polymers obtained with optimum synthesis conditions was 0.22 ? 0.38 dl g^?1 (measured in 1‐chloronaphthalene at 208 °C). These polymers were found to have good thermal performance with a glass transition temperature (T_g) of 90.5 ? 94.6 °C and initial degradation temperature (T_d) of 475–489 °C, showing improved thermal properties compared with homo‐PPS. At the same time the resultant resins had a high tensile strength of 67.5 ? 74.1 MPa and compressive strength of 70.7 ? 85.4 MPa. Additionally, these polymers exhibited a weak UV ? visible reflectivity minimum at 450–570 nm, and the fluorescence spectra of the polymers showed maximum emission around nearly 370 nm. Also they showed excellent chemical resistance and another special property ? bright shiny colors changed into different colors in acid solution. © 2014 Society of Chemical Industry     

Preparation and characterization of poly(vinylidene fluoride)/sulfonated poly(phthalazinone ether sulfone ketone) blends for proton exchange membrane

Poly(vinylidene fluoride)/sulfonated poly(phthalazinone ether sulfone ketone) (PVdF/SPPESK) blend membranes are successfully prepared by solution blending method for novel proton exchange membrane (PEM). PVdF crystallinity, FTIR‐ATR spectroscopy, thermal stability, morphology, water uptake, dimension stability, and proton conductivity are investigated on PVdF/SPPESK blends with different PVdF contents. XRD and DSC analysis reveal that the PVdF crystallinity in the blends depends on PVdF content. The FTIR‐ATR spectra indicate that SPPESK remains proton‐conducting function in the blends due to the intactness of ? SO₃H group. Thermal analysis results show a very high thermal stability (T_d1 = 246–261°C) of the blends. PVdF crystallinity and morphology study demonstrate that with lower PVdF content, PVdF are very compatible with SPPESK. Also, with lower PVdF content, PVdF/SPPESK blends possess high water uptake, e.g., P/S 10/90 and P/S 15/85 have water uptake of 135 and 99% at 95°C, respectively. The blend membranes also have good dimension stability because the swelling ratios are at a fairly low level (e.g., 8–22%, 80°C). PVdF/SPPESK blends with low PVdF content exhibit very high proton conductivity, e.g., at 80°C, P/S 15/85 and P/S 10/90 reach 2.6 × 10^?2 and 3.6 × 10^?2 S cm^?1, respectively, which are close to or even higher than that (3.4 × 10^?2 S cm^?1) of Nafion115 under the same test condition. All above properties indicate that the PVdF/SPPESK blend membranes (particularly, with 10–20% of PVdF content) are very promising for use in PEM field. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of poly(aryl ether ketone ketone)/poly(aryl ether ether ketone ketone) copolymers with pendant cyano groups

2,6‐Diphenoxybenzonitrile (DPOBN) was synthesized by reaction of phenol with 2,6‐difluorobenzonitrile in N‐methyl‐2‐pyrrolidone in the presence of KOH and K₂CO₃. Poly(aryl ether ketone ketone)/poly(aryl ether ether ketone ketone) copolymers with pendant cyano groups were prepared by the Friedel–Crafts electrophilic substitution reaction of terephthaloyl chloride with varying mole proportions of diphenyl ether and DPOBN using 1,2‐dichloroethane as solvent and N‐methyl‐2‐pyrrolidone as Lewis base in the presence of anhydrous AlCl₃. The resulting polymers were characterized by various analytical techniques, such as FT‐IR, differential scanning calorimeter, thermal gravimetric analysis, and wide‐angle X‐ray diffraction. The crystallinity and melting temperature of the polymers were found to decrease with increase in concentration of the DPOBN units in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 514°C in N₂ atmosphere. The glass transition temperature was found to increase with increase in concentration of the DPOBN units in the polymer when the molar ratios of DPOBN to DPE ranged from 10/90 to 30/70. The copolymers containing 30–40 mol % of the DPOBN units exhibit excellent thermostability at (350 ± 10)°C and have good resistance to acidity, alkali, and organic solvents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3601–3606, 2007     

Synthesis,properties, and gas permeation performance of cardo poly(arylene ether sulfone)s containing phthalimide side groups

Novel bisphenol monomers ( 1a‐d ) containing phthalimide groups were synthesized by the reaction of phenolphthalein with ammonia, methylamine, aniline, and 4‐tert‐butylanilne, respectively. A series of cardo poly(arylene ether sulfone)s was synthesized via aromatic nucleophilic substitution of 1a‐d with dichlorodiphenylsulfone, and characterized in terms of thermal, mechanical and gas transport properties to H₂, O₂, N₂, and CO₂. The polymers showed high glass transition temperature in the range 230–296°C, good solubility in polar solvents as well as excellent thermal stability with 5% weight loss above 410°C. The most permeable membrane studied showed permeability coefficients of 1.78 barrers to O₂ and 13.80 barrers to CO₂, with ideal selectivity factors of 4.24 for O₂/N₂ pair and 28.75 for CO₂/CH₄ pair. Furthermore, the structure–property relationship among these cardo poly(arylene ether sulfone)s had been discussed on solubility, thermal stability, mechanical, and gas permeation properties. The results indicated that introducing 4‐tert‐butylphenyl group improved the gas permeability of polymers evidently. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of poly(ester‐ether‐imide)s derived from 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene

A series of novel aromatic poly(ester‐ether‐imide)s with inherent viscosity values of 0.44–0.74 dL g^?1 were prepared by the diphenylchlorophosphate‐activated direct polycondensation of an imide ring‐containing diacid namely 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene ( 1 ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. Owing to comparison of the characterization data, an ester‐containing model compound ( 2 ) was also synthesized by the reaction of 1 with phenol. The model compound 2 and the resulted polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(ester‐ether‐imide)s were also determined. The resulting polymers exhibited an excellent organosolubility in a variety of high polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, and N‐methyl‐2‐pyrrolidone. They were soluble even in common less polar organic solvents such as pyridine, m‐cresol, and tetrahydrofuran on heating. Crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resulted polymers exhibited nearly an amorphous nature. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 221 and 245°C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(ester‐ether‐imide)s were found to be over 410°C in nitrogen. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of new aromatic poly(ester‐imide)s derived from 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl) pyridine and various dihydroxy compounds

A novel class of wholly aromatic poly(ester‐imide)s, having a biphenylene pendant group, with inherent viscosities of 0.32–0.49 dL g^?1 was prepared by the diphenylchlorophosphate‐activated direct polyesterification of the preformed imide‐ring‐containing diacid, 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine (1) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A reference diacid, 2,6‐bis(trimellitimido)pyridine (2) without a biphenylene pendant group and two phenylene rings in the backbone, was also synthesized for comparison purposes. At first, with due attention to structural similarity and to compare the characterization data, a model compound (3) was synthesized by the reaction of compound 1 with two mole equivalents of phenol. Moreover, the optimum condition of polymerization reactions was obtained via a study of the model compound synthesis. All of the resulting polymers were characterized by Fourier transform infrared and ¹H NMR spectroscopy and elemental analysis. The ultraviolet λ_max values of the poly(ester‐imide)s were also determined. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, chloroform, tetrahydrofuran, and m‐cresol, as well as in polar organic solvents, such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The crystalline nature of the polymers obtained was evaluated by means of wide‐angle X‐ray diffraction. The resulting poly(ester‐imide)s showed nearly an amorphous nature, except poly(ester‐imide) derived from 4,4′‐dihydroxy biphenyl. The glass transition temperatures (T_g) of the polymers determined by differential scanning calorimetry thermograms were in the range 298–342 °C. The 10% weight loss temperatures (T_10%) from thermogravimetric analysis curves were found to be in the range 433–471 °C in nitrogen. Films of the polymers were also prepared by casting the solutions. Copyright © 2006 Society of Chemical Industry     

Preparation and properties of bisphenol A‐based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirmed by Fourier transform infrared spectra and ¹H NMR analysis. The series of sulfonated copolymers based membranes were prepared and evaluated for proton exchange membranes (PEM). The membranes showed good thermal stability and mechanical property. Transmission electron microscopy was used to obtain the microstructures of the synthesized polymers. The membranes exhibit increased water uptake from 8% to 66%, ion exchange capacities from 0.41 to 2.18 meq/g and proton conductivities (25°C) from 0.012 to 0.102 S/cm with the degree of sulfonation increasing. The proton conductivities of bi A‐SPAES‐6 membrane (0.10–0.15 S/cm) with high‐sulfonated degree are higher than that of Nafion 117 membrane (0.095–0.117 S/cm) at all temperatures (20–100°C). Especially, the methanol diffusion coefficients of membranes (1.7 × 10^?8 cm²/s–8.5 × 10^?7 cm²/s) are much lower than that of Nafion 117 membrane (2.1 × 10^?6 cm²/s). The new synthesized copolymer was therefore proposed as a candidate of material for PEM in direct methanol fuel cell. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of new poly(amide‐imide)s based on 2,5‐bis(trimellitimido)chlorobenzene

A series of new aromatic poly(amide‐imide)s were synthesized by the triphenyl phosphite‐activated polycondensation of the diimide‐diacid, 2,5‐bis(trimellitimido)chlorobenzene (I) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The poly(amide‐imide)s had inherent viscosities of 0.76–1.42 dL g⁻¹. The diimide‐diacid monomer (I) was prepared from 2‐chloro‐p‐phenylenediamine with trimellitic anhydride. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents, including NMP and N,N‐dimethylacetamide. Transparent, flexible, and tough films of these polymers could be cast from N,N‐dimethylacetamide or NMP solutions. Their cast films had tensile strengths ranging from 74 to 95 MPa, elongations at break from 7 to 11%, and initial moduli from 1.38 to 3.25 GPa. The glass transition temperatures of these polymers were in the range of 233°–260°C, and the 10% weight loss temperatures were above 450°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1691–1701, 1999     

Synthesis and characterization of novel poly(arylene ether)s based on 9,10‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) anthracene and 2,7‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) fluorene

Two new bisfluoro monomers 9,10‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) anthracene and 2,7‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) fluorene have been synthesized by the cross‐coupling reaction of 2‐fluoro‐3‐trifluoromethyl phenyl boronic acid with 9,10‐dibromo anthracene and 2,7‐dibromo fluorine, respectively. These two bisfluoro compounds were used to prepare several poly(arylene ether)s by aromatic nucleophilic displacement of fluorine with various bisphenols; such as bisphenol‐A, bisphenol‐6F, bishydroxy biphenyl, and 9,9‐bis‐(4‐hydroxyphenyl)‐fluorene. The products obtained by displacement of the fluorine atoms exhibits weight‐average molar masses up to 1.5 ×10⁵ g mol^?1 and number average molecular weight up to 6.8 × 10⁴ g mol^?1 in GPC. These poly(arylene ether)s show very high thermal stability even up to 490°C for 5% weight loss occurring at this temperature in TGA in synthetic air and showed glass transition temperature observed up to 310°C. All the polymers are soluble in a wide range of organic solvents, e.g., CHCl₃, THF, NMP, and DMF. Films cast from DMF solution are brittle in nature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of poly(dihalophenylene oxide)s by solid-state thermal-decomposition of manganese phenolate complexes with tetramethylethylenediamine

The characterization of poly(dihalophenylene oxide)s synthesized by solid-state thermal decomposition of manganese phenolate complexes with tetramethylethylenediamine (TMEN) ligand is reported. The complexes prepared with 2,4,6-trichlorophenol (TCP) and 2,4,6-tribromophenol (TBP) have been characterized by FTIR spectroscopy, elemental analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The dependence of the polymerization yield on temperature and decomposition time of the complexes has been investigated. Maximum polymerization yield is obtained at 220°C and 48 h. The polymers synthesized from the complexes have been characterized by ¹H-NMR and FTIR spectroscopy, DSC, and viscometric measurements. All polymers have a branched structure, a high T_g and low intrinsic viscosity. © 1999 Society of Chemical Industry     

Preparation and characterization of poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones

The two poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones have been prepared via polycondensation reaction of di‐tert‐butyl adipate and di‐tert‐butyl fumarate with 2,2‐bis(p‐chloro dimethylsiloxy‐phenyl)propane to give tert‐butyl chloride as the condensate. The polymerizations were performed under nitrogen at 110°C for 24 h without addition of solvents and catalysts to obtain the poly(silyl ester)s with weight average molecular weights typically ranging from 5000 to 10,000 g/mol. Characterization of the poly(silyl ester)s included ¹H NMR and ¹³C NMR spectroscopies, infrared spectroscopy, ultraviolet spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), gel permeation chromatography, and Ubbelohde viscometer. The glass transition temperatures (T_g) of the obtained polymers were above zero because of the introducing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones. The TGA/DTG results showed that the obtained poly(silyl ester)s were stable up to 180°C and the residual weight percent at 800°C were 18 and 9%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1937–1942, 2006     

Synthesis and characterization of novel aromatic poly(amide‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl or 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic diamines

New aromatic diimide‐dicarboxylic acids having kinked and cranked structures, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b), were synthesized by the reaction of trimellitic anhydride with 2,2′‐bis(4‐aminophenoxy)biphenyl (1a) and 2,2′‐bis(4‐aminophenoxy)‐1,1′‐binaphthyl (1b), respectively. Compounds 2a and 2b were characterized by FT‐IR and NMR spectroscopy and elemental analyses. Then, a series of novel aromatic poly(amide‐imide)s were prepared by the phosphorylation polycondensation of the synthesized monomers with various aromatic diamines. Owing to structural similarity, and a comparison of the characterization data, a model compound was synthesized by the reaction of 2b with aniline. The resulting polymers with inherent viscosities of 0.58–0.97 dl g^?1 were obtained in high yield. The polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(amide‐imide)s were also determined. The polymers were readily soluble in polar aprotic solvents. They exhibited excellent thermal stabilities and had 10% weight loss at temperatures above 500 °C under a nitrogen atmosphere. Copyright © 2003 Society of Chemical Industry     

Synthesis and properties of novel aromatic poly(ester–amide)s derived from 1,5‐bis(3‐aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene‐ring‐containing bis(ester–amine), 1,5‐bis(3‐aminobenzoyloxy)naphthalene, was prepared from the condensation of 1,5‐dihydroxynaphthalene with 3‐nitrobenzoyl chloride followed by catalytic hydrogenation. A series of novel naphthalene‐containing poly(ester–amide)s was synthesized by direct phosphorylation polyamidation from this bis(ester–amine) with various aromatic dicarboxylic acids. The polymers were produced in high yields and had moderate inherent viscosities of 0.47–0.81 dL g^?1. The poly(ester–amide) derived from terephthalic acid was semicrystalline and showed less solubility. Other polymers derived from less rigid and symmetrical diacids were amorphous and readily soluble in most polar organic solvents and could be solution‐cast into transparent, flexible and tough films with good mechanical properties. The amorphous poly(ester–amide)s displayed well‐defined glass transition temperatures of between 179 and 225 °C from differential scanning calorimetry and softening temperatures of between 178 and 211 °C from thermomechanical analysis. These poly(ester–amide)s did not show significant decomposition below 400 °C in nitrogen or air. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of poly(ethylene oxide)‐based glycopolymers and their biocompatibility with osteoblast cells

Poly(ethylene oxide)‐block‐poly(methacryl‐d ‐glucopyranoside) (PEO‐GP) and poly(methacryl‐d ‐glucopyranoside) (H‐GP) glycopolymers were synthesized by deacetylation of acetylated polymers which were synthesized via atom transfer radical polymerization. The synthesized glycopolymers were characterized using ¹H NMR, ¹³C NMR and Fourier transform infrared (FTIR) spectroscopies, gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The deacetylated polymers exhibited onset decomposition temperatures about 60 °C lower compared to the polymers having acetyl pendants. The glass transition temperature (T_g) of the acetylated homopolymer was 133 °C and that of the PEO‐based block copolymer was 124 °C. The deacetylated polymers H‐GP and PEO‐GP exhibited T_g values of about ?30 °C. Biocompatibility of the H‐GP and PEO‐GP glycopolymers was obtained by studying osteoblast cell adhesion, viability and proliferation in vitro. The cell viability showed an increase with increasing concentration of H‐GP from 0.1 to 1 µmol L^?1 and then decreased with further increase in its concentration (10–1000 µmol L^?1). PEO‐GP did not show a significant variation in cell viability on variation of its concentration from 0.1 to 1000 µmol L^?1. The significant improvement in biocompatibility with osteoblast cells in the presence of PEO‐GP was considered as due to the covalently bonded PEO segment of the methacrylate glycopolymer block. © 2014 Society of Chemical Industry     

Poly(amide‐ester)s derived from dicarboxylic acid and aminoalcohol

A series of alternating aliphatic poly(amide‐ester)s, derived from dicarboxylic acid and aminoalcohols, were obtained by polycondensation in melt. All poly(amide‐ester)s were characterized by FTIR and ¹H/¹³C‐NMR spectroscopies. The synthesized polymers showed an inherent viscosity ranging from 0.4 to 1.0 dL g^?1. Thermal analysis showed melting points within the range 100–115°C and glass transition within the range 30–60°C. Decomposition temperatures were more than 200°C higher than the corresponding melting temperatures. The polymers can thus be processed from the melt. The processed polymers were partially crystalline with good thermal stability. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 362–368, 2005     

Synthesis and properties of aromatic polyimide,poly(benzoxazole imide), and poly(benzoxazole amide imide)

Two series of heterocyclic aromatic polymers were synthesized from 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthaltic anhydride) and 2,2′‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride by two‐step method. The inherent viscosities were in the range of 24–45 cm³/g. The effects of the rigid benzoxazole group in the backbone of copolymer on the thermal, mechanical, and physical properties were investigated. These polymers exhibit good thermal stability. The temperatures of 5% weight loss (T₅) of these polymers are in the range of 403–530°C in air and 425–539°C in nitrogen. The chard yields of these polymers are in the range of 15–24% in air and 54–61% in nitrogen. These polymers also have high glass‐transition temperatures and a low coefficient of thermal expansion and good mechanical properties. The poly(benzoxazol imide) has a higher tensile strength and modulus than those of neat polyimide. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of biodegradable aliphatic copolyesters with poly(tetramethylene oxide) soft segments

A series of aliphatic poly(ether–ester)s based on flexible poly(tetramethylene oxide) (PTMO) and hard poly (butylene succinate) (PBS) segments were synthesized by the catalyzed two‐step transesterification reaction of dimethyl succinate, 1,4‐butanediol, and α,ω‐hydroxy‐terminated PTMO (M_n = 1000 g/mol) in the bulk. The content of soft PTMO segments in the polymer chains was varied from 10 to 50 mass %. The effect of the introduction of the soft segments on the structure, thermal, and physical properties, as well as on the biodegradation properties was investigated. The composition and structure of the aliphatic segmented copolyesters were determined by ¹H NMR spectroscopy. The molecular weights of the polyesters were verified by viscometry of dilute solutions and polymer melts. The thermal properties were investigated using DSC. The degree of crystallinity was determined by means of DSC and WAXS. Biodegradation of the synthesized copolyesters, estimated in enzymatic degradation tests on polymer films in phosphate buffer solution with Candida rugosa lipase at 37°C, was compared with hydrolytic degradation in the buffer solution. Viscosity measurements confirmed that there was no change in molecular weight of the copolyesters leading to the conclusion that the degradation mechanism of poly(ester–ether)s based on PTMO segments occurs through the surface erosion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Microwave promoted synthesis and characterization of isomeric poly(ether ether ketone)s

A series of isomeric poly(ether ether ketone)s were synthesized using microwave‐assisted method by nucleophilic substitution reaction of hydroquinone and 4,4′‐biphenol with 4,4′‐difluorobenzophenone (DFBP) or 2,4′‐DFBP in the presence of anhydrous K₂CO₃. The polymers with inherent viscosities in the range of 0.20–0.71 dlg^?1 were obtained in quantitative yields and had excellent thermal stability as shown by the temperature of 5% weight loss in nitrogen above 410°C. X‐ray diffraction patterns confirmed the semicrystalline character of some of the polymers. The results also indicate that the reaction time was shortened remarkably and the reaction temperature could be controlled easily. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Synthesis and characterizations of poly(4‐alkylthiazole vinylene)

Two poly(thiazole vinylene) derivatives, poly(4‐hexylthiazole vinylene) (P4HTzV) and poly(4‐nonylthiazole vinylene) (P4NTzV), were synthesized by Pd‐catalyzed Stille coupling method. The polymers are soluble in common organic solvents such as o‐dichlorobenzene and chloroform, and possess good thermal stability. P4HTzV and P4NTzV films exhibit broad absorption bands at 400–720 nm with an optical bandgap of 1.77 eV and 1.74 eV, respectively. The HOMO (the highest occupied molecular orbital) energy levels of P4HTzV and P4NTzV are ?5.11 and ?5.12 eV, respectively, measured by cyclic voltammetry. Preliminary results of the polymer solar cells based on P4HTzV : PC₆₁BM ([6,6]‐phenyl‐C‐61‐butyric acid methyl ester) (1 : 1, w/w) show a power conversion efficiency of 0.21% with an open‐circuit voltage of 0.55 V and a short circuit current density of 1.11 mA cm^?2, under the illumination of AM1.5G, 100 mW cm^?2. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012