“Living”/controlled polymerization of methyl acrylate mediated by dithiocarbamates under γ‐ray irradiation

γ‐Ray initiated reversible addition–fragmentation chain transfer (RAFT) polymerizations of methyl acrylate (MA) were investigated in bulk using five different dithiocarbamate structures, 2‐phenyl‐benzoimidazole‐1‐carbodithioic acid benzyl ester ( 1b ), 2‐methyl‐benzoimidazole‐1‐carbodithioic acid benzyl ester ( 1c ), 2‐pheny‐indole‐1‐cardithioic acid benzyl ester ( 1d ), 2‐(carbazole‐9‐carbothioylsulfanyl)‐2‐methyl‐propionic acid ester ( 1e ), and carbazole‐9‐carbodithioic acid naphthalene‐1‐ylmethyl ester ( 1f ), as RAFT agents. The experiment results showed that MA polymerized in a controlled way under a low irradiation dose rate, i.e., first‐order kinetic plots, the experimental molecular weights increased linearly with monomer conversions. The polydispersity indices of polymers generally remained at a relatively low value (lower than 1.4). The effect of irradiation dose on the polymerization results was investigated. The obtained polymers were characterized with ¹H NMR and GPC. Chain‐extension reaction was also successfully carried out using the obtained polymer as the macro‐RAFT agent and styrene as the second monomer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1769–1775, 2007     

Reversible addition–fragmentation chain transfer polymerization of styrene with benzoimidazole dithiocarbamate as a reversible addition–fragmentation chain transfer agent

Two novel dithiocarbamates [2‐Y‐benzoimidazole‐1‐carbodithioic acid benzyl esters: Y = methyl (1b) or phenyl (1c)] were synthesized and successfully used in the reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene in bulk with thermal initiation. The effects of the temperatures and concentration ratios of the styrene and RAFT agents on the polymerization were investigated. The results showed that the polymerization of styrene could be well controlled in the presence of 1b or 1c. The linear relationships between ln([M]₀/[M]) and the polymerization time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) indicated that the polymerizations were first‐order reactions with respect to the monomer concentration. The molecular weights increased linearly with the monomer conversion and were close to the theoretical values. The molecular weight distributions [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] were very narrow from 5.3% conversion up to 94% conversion (M_w/M_n < 1.3). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 560–564, 2006     

2‐oxo‐tetrahydrofuran‐3‐yl 9H‐carbazole‐9‐carbodithioate mediated reversible addition‐fragmentation chain transfer (RAFT) polymerization

The 2‐oxo‐tetrahydrofuran‐3‐yl 9H‐carbazole‐9‐carbodithioate (OTCC) mediated reversible addition‐fragmentation chain transfer (RAFT) polymerizations of styrene and methyl acrylate were investigated. The results showed that OTCC was an effective RAFT agent for the polymerizations of styrene and methyl acrylate. The polymerizations exhibited “living”/controlled characters. The resulting carbazole and 2‐oxo‐tetrahydrofuran‐3‐yl groups end‐labeled polymer exhibited stronger fluorescence in N, N‐dimethyl formamide, compared with those of OTCC under the same conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene using novel heterocycle‐containing chain transfer agents

BACKGROUND: Controlled/‘living’ radical polymerization is a new and robust method to synthesize polymers with predetermined molecular weight, narrow polydispersity and tailored architecture. Several methods have been developed but reversible addition‐fragmentation chain transfer (RAFT) has several advantages over the other methods. It has been reported that the effectiveness of RAFT agents depends strongly on the nature of the Z and R groups. RESULTS: Three new dithiocarbamates, namely (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrrole‐1‐carbodithioate (CTA‐A), (1‐phenyl ethyl)‐pyrazole‐1‐carbodithioate (CTA‐B) and (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrazole‐1‐carbodithioate (CTA‐C), were synthesized for studying the effect of the Z and R group of a chain transfer agent on the RAFT polymerization of styrene, initiated by 2,2′‐azobisisobutyronitrile. Well‐controlled molecular weight with narrow polydispersity (1.10–1.46) was achieved. The increase in molecular weight with conversion is linear and follows first‐order kinetics. CONCLUSION: The detailed kinetic results show that the structure of the activating (Z) group of dithiocarbamates has significant effects on the reactivity of dithiocarbamates towards the polymerization of styrene. In the homopolymerization of styrene it was found that, from the polydispersity index of polystyrenes obtained and the kinetic results, the pyrazole‐based dithiocarbamates (CTA‐B and CTA‐C) are very effective compared to the pyrrole‐based dithiocarbamate (CTA‐A). All the polymerizations show controlled living characters. Copyright © 2007 Society of Chemical Industry     

Synthesis and Characterizations of Triphenylamine End-Functionalized Polymers via Reversible Addition-Fragmentation Chain Transfer Polymerization

A novel reversible addition-fragmentation chain transfer (RAFT) reagent bearing triphenylamine (TPA) group, 4-diphenylamino-dithiobenzoic acid benzyl ester (DDABE), was designed and synthesized. It was used in the RAFT polymerizations of styrene (St) and methyl acrylate (MA) to prepare end-functionalized polymers. The results of the polymerization showed that the RAFT polymerizations could be well controlled using DDABE as the RAFT agent. Number-average molecular weight (M_n,GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow (PDI< 1.50). The results of chain-extension reaction, ¹H NMR spectra and UV/Vis spectra confirmed that most of the polymers chains were end-capped by the functional triphenylamine (TPA) groups. The effect of feed molar ratios of St/DDABE/AIBN on polymerization was investigated.     

Synthesis of 1,3‐benzodioxole end‐functionalized polymers via reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene was carried out in the presence of a novel RAFT reagent, bearing 1,3‐benzodioxole group, benzo [1,3]dioxole‐5‐carbodithioic acid benzo [1,3]dioxol‐5‐ylmethyl ester (BDCB), to prepare end‐functionalized polystyrene. The polymerization results showed that RAFT polymerization of styrene could be well controlled. Number–average molecular weight (M_n(GPC)) increased linearly with monomer conversion, and molecular weight distributions were narrow (M_w/M_n < 1.4). The successful reaction of chain extension and analysis of ¹H NMR spectra confirmed the existence of the functional 1,3‐benzodioxole group at the chain‐end of polystyrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3535–3539, 2006     

4‐Halogeno‐3,5‐dimethyl‐1H‐pyrazole‐1‐carbodithioates: versatile reversible addition fragmentation chain transfer agents with broad applicability

Pyrazole‐based dithiocarbamates are versatile reversible addition fragmentation chain transfer (RAFT) agents that provide molar mass and dispersity (? ) control over the radical polymerization of both more and less activated monomers (MAMs and LAMs). In this paper we report on theoretical and experimental findings demonstrating that their activity as RAFT agents can be significantly enhanced by introducing electron‐withdrawing substituents to the pyrazole ring. This enhancement is most noticeable in methyl methacrylate polymerization where product molar masses are more accurately predicted by the RAFT agent concentration, and significantly lower ? values, with respect to those seen with the parent RAFT agent under similar conditions, are observed. Thus, use of 4‐chloro‐3,5‐dimethyl‐1H ‐pyrazole‐1‐carbodithioate provides a poly(methyl methacrylate) with the anticipated molar mass and ? as low as 1.3 at high monomer conversion. Good control is retained for monosubstituted MAMs, styrene, methyl acrylate and N ,N ‐dimethylacrylamide. Low dispersities and less molar mass control are also achieved for homo‐ and copolymerizations with the LAM vinyl acetate, albeit with some retardation. © 2017 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Urotropine as a highly effective and versatile promoter for atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) is a transition metal complex‐catalyzed controlled/‘living’ radical process. Recently, there has been a lot of interest focused on decreasing the catalyst loading and reducing the cost of post‐polymerization purification for ATRP. In this work, urotropine was found to significantly enhance the ATRP of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St) catalyzed by CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) and CuBr/tris(2‐(dimethylamino)ethylamine) (Me₆TREN). With the addition of 25 times the amount of urotropine relative to CuBr, well‐controlled polymerizations of MA, MMA and St were obtained at catalyst‐to‐initiator ratios of 0.01, 0.05 and 0.05, respectively, producing the corresponding polymers with molecular weights close to theoretical values and low polydispersities. The catalyst concentration could even be reduced to ppm level at a catalyst‐to‐initiator ratio as low as 0.001 in the polymerization of MA. These results indicate that urotropine is a very effective and versatile promoter for both CuBr/PMDETA and CuBr/Me₆TREN. In the presence of urotropine, the catalyst loading could be reduced by as much as 1000 times. As PMDETA is one of the cheapest ATRP ligands, the combination of urotropine with CuBr/PMDETA could substantially reduce the catalyst loading and the cost of post‐polymerization purification at the industrial scale and thus is promising for potential industrial applications. © 2014 Society of Chemical Industry     

Synthesis of well‐defined polystyrene‐graft‐poly(methyl methacrylate)

A well‐defined graft copolymer, polystyrene‐graft‐poly(methyl methacrylate), was synthesized in two steps. In the first step, styrene and p‐vinyl benzene sulfonyl chloride were copolymerized via reversible addition–fragmentation chain transfer polymerization (RAFT) in benzene at 60 °C with 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as a chain transfer agent and 2,2′‐azobis(isobutyronitrile) as an initiator. In the second step, poly[styrene‐co‐p‐(vinyl benzene sulfonyl chloride)] was used as a macroinitiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in toluene at 80 °C with CuCl as a catalyst and 2,2′‐bipyridine as a ligand. With sulfonyl chloride groups as the initiating sites for the ATRP of MMA, high initiation efficiencies were obtained. Copyright © 2006 Society of Chemical Industry     

Preparation and Characterization of Anthracene End-Capped Polystyrene via Reversible Addition-Fragmentation Chain Transfer Polymerization

Summary A novel benzodithioate compound with an anthracene structure (anthracen-9-ylmethyl benzodithioate, AMB) was synthesized. Using AMB as the chain transfer agent, the RAFT polymerizations of styrene with AIBN as an initiator were carried out in difference reaction conditions. The polymerization results showed that AMB was an effective RAFT agent for the RAFT polymerizations of styrene with the characteristics of “living”/controlled free radical polymerization. The structure of the obtained polymers was characterized by ¹H NMR. The results showed that the polymers contained an anthrancene moiety of AMB in the end and showed enhanced fluorescence property than AMB in DMF solution. The chain extension experiments of the obtained polymer with two different monomers (styrene and methyl acrylate) were successfully carried out.     

Substituent effects on trithiocarbonates‐mediated polymerization of styrene

In the present work, the effectiveness of five trithiocarbonates (TTCs) as mediating agents in the reversible addition fragmentation chain transfer (RAFT) polymerization and photopolymerization of styrene (St) were investigated. The five TTCs including S,S′‐bis(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate (TTC1), bis(2‐oxo‐2‐phenyl‐ethyl) trithiocarbonate (TTC2), 3‐(2‐carboxyethylsulfanylthiocarbonylsulfanyl)‐propionic acid (TTC3), 2‐(2‐carboxyethylsulfanylthiocarbonylsulfanyl)propionic acid (TTC4), and 2‐(2‐carboxyethylsulfanylthiocarbonylsulfanyl)‐2‐methylpropionic acid (TTC5) were synthesized, in which the substitution patterns (groups Z and R) of the TTCs were varied. The dynamic behavior of TTC1, TTC2, TTC4, and TTC5‐mediated polymerization of St was well described by pseudo first‐order kinetics. In the presence of TTC1, TTC2, TTC4, and TTC5, the polydispersity indices changed with increasing conversion in the range of 1.10–1.25 typical for RAFT‐prepared (co)polymers, and were well below the theoretical lower limit of 1.50 for a normal free radical polymerization. Transfer coefficients of TTCs in St polymerization at 70°C were estimated by using the Mayo method. Density functional theory calculations successfully predicted the effect of the structure of TTCs on the activity of RAFT agents in a qualitative manner. The calculated results for RAFT agents agreed well with the experimental results. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

RAFT polymerization of styrene mediated by naphthalene-containing RAFT agents and optical properties of the polymers

In this paper, we designed and synthesized five novel reversible addition–fragmentation chain transfer (RAFT) agents bearing naphthyl moieties in the Z or R groups, including 3,4,5-trimethoxy-benzyl dithio-2-naphthalenoate (TOBDN), 4-nitrobenzyl dithio-2-naphthalenoate (NBDN), 1-menaphthyl 4-cyanodithiobenzoate (NCDB), 1-menaphthyl dithiobenzoate (NDB) and 1-menaphthyl dithio-2-naphthalenoate (NDN). The RAFT polymerizations of styrene mediated by these RAFT agents with AIBN as the initiator at 80 °C were conducted and evaluated. Except for NCDB, the RAFT agents showed good control over the polymerization at different RAFT agent concentrations: the M_n,GPC increased linearly with the monomer conversion, and the PDIs of the polymers were relatively low (PDI = 1.20–1.50). The structure of RAFT agents bearing three different R groups with naphthyl as the Z group showed less effects on the polymerization rate, while those bearing different Z groups with 1-menaphthyl as the R group presented significant effects on the polymerization rates. The polymerization rate with phenyl as the Z group was higher than that with 2-naphthyl as the Z group, and it decreased significantly when using 4-cycno phenyl as the Z group. Retardation effects were observed with all the RAFT agents. ¹H NMR spectra and chain extension results confirmed that most of the polymer chains were “living”. Ultraviolet (UV) absorption of naphthyl moieties at the R group showed blue shifts compared with those of naphthyl at the Z group. The UV absorption intensity of PS was uniformly lower than that of the corresponding RAFT agent, while the fluorescence intensity of PS was higher than that of the corresponding RAFT agent.     

Morphological studies in thermally initiated emulsion (co)polymerization without conventional initiators

Poly(methyl methacrylate‐co‐styrene) composite latices were prepared by thermally initiated seed emulsion (co)polymerization of styrene (ST), methyl methacrylate (MMA), or ST and MMA employing a PST or PMMA seed in the absence of conventional initiators. The changes of particle morphology, observed by transmission electron microscopy (TEM), were investigated by varying seed particle component, the weight ratio of monomer to seed polymer, monomer composition, and employing preswelling of the seed particles. The size distribution of polymer particles obtained from thermally initiated emulsion (co)polymerization was improved by employing the seed process. Hemisphere‐like, sandwich‐like, core‐shell, and inverted core‐shell particle morphologies were observed depending upon the polymerization conditions. The preswelling of seed particles did not affect the morphology of final particles. The particle morphologies, obtained from the thermal process, were compared with those obtained from conventional seed emulsion polymerization. The incorporation of an initiator fragment SO to polymer chain ends seemed to allow the PST chains to gain some hydrophilicity. From the observation of particle morphology, the hydrophilicity of involved polymers were in the following order: PMMA with ionic (? SO) chain ends > PMMA with no ionic ends > PST with ionic ends > 60% MMA P(MMA‐co‐ST) with no polar ends > 40% MMA P(MMA‐co‐ST) with no polar ends > PST with no polar ends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1737–1748, 2002; DOI 10.1002/app.10581     

Atom transfer radical polymerizations of methyl methacrylate and styrene with an iniferter reagent as the initiator

Three novel iniferter reagents were synthesized and used as initiators for the polymerizations of methyl methacrylate (MMA) and styrene (St) in the presence of copper(I) bromide and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 90 and 115°C, respectively. All the polymerizations were well controlled, with a linear increase in the number‐average molecular weights during increased monomer conversions and relatively narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.36) throughout the polymerization processes. The polymerization rate of MMA was faster in bulk than that in solution and was influenced by the different polarities of the solvents. A slight change in the chemical structures of the initiators had no obvious effect on the polymerization rates of MMA and St. The initiator efficiency toward MMA was lower than that toward St. The results of ¹H‐NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrum analysis, and chain‐extension experiments demonstrated that well‐defined poly(methyl methacrylate) and polystyrene bearing photolabile groups could be obtained via atom transfer radical polymerization (ATRP) with three iniferter reagents as initiators. The polymerization mechanism for this novel initiation system was a common ATRP process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of α,ω‐isocyanate telechelic polymethacrylate soft segments with activated ester side functionalities and their use for polyurethane synthesis

The synthetic route for the preparation of α,ω‐isocyanate‐telechelic poly(methyl methacrylate‐co‐acryloxysuccinimide) and α,ω‐ isocyanate‐telechelic poly(methyl methacrylate‐co‐acrylamidohexanoic succinimide) soft segments is presented. The strategy includes reversible addition fragmentation chain transfer (RAFT) copolymerization and two post polymerization modification steps. The RAFT polymerizations result in copolymers with an activated ester proportion within the polymer chains of 8% N‐acryloxysuccinimide and 5% 6‐acrylamidohexanoic succinimide. The reactivity ratios of the monomer pairs were determined. In a first post polymerization reaction carboxylic acid homo telechelic polymers were prepared by reacting the ω‐dithiobenzoate end‐group with an excess of azobis(cyanovaleric acid). In a second modification step the α‐ and ω‐carboxylic acid end‐groups were reacted with hexamethylene diisocyanate and 100% isocyanate telechelic copolymers were obtained. Finally segmented polyurethanes were prepared by coupling hexamethylene diisocyanate (HDI) end capped soft segments with hard segments composed of 1,4‐butanediol and HDI. © 2013 Society of Chemical Industry     

Synthesis of Gemini‐Like Methyl Acrylate‐Acrylic Acid‐Methyl Acrylate Triblock Copolymers Surfactants by RAFT Polymerization in Solution and Investigation of their Behavior at the Air–Water Interface

A series of methyl acrylate‐acrylic acid amphiphilic triblock copolymers (PMA‐PAA‐PMA) were prepared by solution polymerization using S,S′‐bis (α,α‐dimethy1acetic acid) trithiocarbonate (BDAT) as a reversible addition fragmentation chain transfer (RAFT) agent and methyl acrylate (MA) as the first monomer. The triblock copolymers and their common MA homopolymer precursors were characterized in terms of their compositions, molecular weights and behavior at the air–water interface using ¹H‐NMR spectroscopy, thermogravimetric analysis, gel permeation chromatography, surface tension, transmission electron microscopy (TEM) and dynamic light scattering respectively. The results indicated that PMA‐PAA‐PMA was successfully synthesized through RAFT polymerization. The polydispersity index (PDI) decreased when the molar ratio [n(MA)/n(AA)] increased, the lowest PDI was obtained at 5.23 wt% RAFT and the molecular weights were consistent with the theoretical value as the RAFT agent percentage varied. The polymer neutralized by sodium hydroxide solution shows a low critical micelle concentration (CMC), which was <10^?2 mol L^?1 in water. The A_min values increased and showed a maximum with decreased AA chain length. TEM showed that the neutralized polymer formed a special vesicle structure with large pore structure which led to a low CMC and surface tension of water.     

Controlled/living free-radical copolymerization of allyl glycidyl ether with methyl acrylate under Co γ-ray irradiation

An investigation on the copolymerization of allyl glycidyl ether (AGE), an epoxy-functional monomer, with methyl acrylate (MA) was performed in the presence of benzyl 1H-imidazole-1-carbodithioate (BICDT) under ⁶⁰Co γ-ray irradiation. The polymerizations revealed good characteristics of RAFT process. The content of AGE incorporation into the copolymer increased with higher monomer conversion and higher molar fraction of the AGE in the monomer feed. However, the polymerization could slow down when the fraction of AGE increased in the monomer feed, which might be attributed to the low activity of AGE. Taking advantage of RAFT process, functional block copolymer poly(AGE/MA)-block-poly(styrene) was prepared in the presence of poly(styrene) macroRAFT agent, and the copolymer was characterized by ¹H NMR spectra and GPC.     

Rapid ambient temperature living radical polymerization of methyl methacrylate and styrene utilizing sodium hypophosphite as reducing agent

A facile, safe, and inexpensive reducing agent, sodium hypophosphite (NaH₂PO₂·H₂O), has been successfully used to perform ambient temperature living radical polymerizations of methyl methacrylate (MMA) and styrene (St). The rapid radical polymerizations were readily obtained at 25°C, i.e., MMA reached a conversion of ca 90% after 2.5 h, and St reached a conversion of ca 80% after 40 h. The polymerizations of MMA and St exhibited excellent living/controlled nature, as evidenced by pseudo first‐order kinetics of polymerization, linear evolution of molecular weights with increasing monomer conversions, and narrow molecular weight distributions. The various experimental parameters—ligand, solvent, and molar ratio of NaH₂PO₂·H₂O to CuSO₄·5H₂O—were varied to improve the control of polymerization, molecular weight, and molecular weight distribution. ¹H NMR analyses and chain‐extension reactions confirm the high chain‐end functionality of the resultant poly(methyl methacrylate) and polystyrene. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42123.     

Photografting of PVC containing N,N‐diethyldithiocarbamate groups with vinyl monomers

Poly(vinyl chloride) (PVC) with pendent N,N‐diethyldithiocarbamate groups (PVC–SR) was prepared through the reaction of PVC with sodium N,N‐diethyldithiocarbamate (NaSR) in butanone and used as a photoinitiator for the grafting polymerization of three vinyl monomers [styrene (St), methyl methacrylate (MMA), and acrylamide (Am)]. The effects of ultraviolet (UV) irradiation time, PVC–SR amount, and the monomer amount on grafting and grafting efficiency were investigated. The results showed that PVC–SR could initiate the polymerization of three vinyl monomers effectively and obtained crosslinked copolymers. The grafting and grafting efficiency of styrene and methyl methacrylate were higher than those of acrylamide. The polymerization activity of three monomers was acrylamide > methyl methacrylate > styrene. By analyzing the UV spectrum of PVC–SR with a different irradiation time, it was confirmed that PVC–SR was dissociated mainly into macromolecular the sulfur radical PVC–S · and the small molecular carbon radical · C(S)N(C₂H₅)₂; the grafting polymerization mechanism was discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2569–2574, 2000     

Synthesis of 9H-fluoren-9-yl benzodithioates and their application as reversible addition–fragmentation chain transfer agents in living radical polymerization of styrene

The reversible addition–fragmentation chain transfer (RAFT) polymerization is one of living radical polymerizations. In this study, four different 9H-fluoren-9-yl benzodithiolates (FBDTs) were synthesized, and used along with azobis(isobutyronitrile) (AIBN), a radical initiator, in polymerization of styrene (ST) at the molar ratio of 3:1. This new transfer agent exhibited the typical characteristic living free radical polymerization behaviors such as good control of molecule weight and narrow molecule weight distribution. It was concluded that the FBDTs can be used as the RAFT agents in free radical polymerization of vinyl monomers.