Effects of interfacial adhesion on properties of polypropylene/Wollastonite composites

Wollastonite reinforced polypropylene (PP/CaSiO₃) composites were prepared by melt extrusion. A silane coupling agent and a maleic anhydride grafted PP (PP‐g‐MA) were used to increase the interfacial adhesion between the filler and the matrix. The increased adhesion observed by scanning electron microscopy (SEM) resulted in improved mechanical properties. A model was applied to describe the relationship between the interfacial adhesion and tensile properties of PP/CaSiO₃ composites. There is stronger interfacial adhesion between silane‐treated CaSiO₃ and polymer matrix containing PP‐g‐MA as a modifier. Results of dynamic mechanical thermal analysis (DMTA) showed that stronger interfacial adhesion led to higher storage modulus. The influence of CaSiO₃ particles on the crystallization of PP was studied by using differential scanning calorimetry (DSC). The introduction of CaSiO₃ particles does not affect the crystallization temperature and crystallinity of PP matrix significantly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Overall crystallization behavior of polypropylene–clay nanocomposites; Effect of clay content and polymer/clay compatibility on the bulk crystallization and spherulitic growth

The effect of clay nanoparticles on the overall crystallization (isothermal crystallization, spherulitic growth, and nonisothermal crystallization) behavior of polypropylene (PP) was studied by means of differential scanning calorimetry and polarized light optical microscopy. In addition, the changes produced by the compatibility between the filler and the matrix were analyzed by using more hydrophobic clays or incorporating PP grafted with maleic anhydride (PP‐g‐MA). Different models were used to predict the relative degree of crystallinity and several parameters were analyzed. A clear nucleating effect of clay nanoparticles was found on the experimental behavior (induction time, half‐crystallization time, and overall crystallization time) and also deducted from the models parameters (Avrami exponent, rate constant, nucleation activity, activation energy). The effect was also related with the matrix/clay compatibility. In addition, the polarized light optical microscopy showed that the number of spherulites increased and their size decreased when clay was incorporated, which is also an indication of the heterogeneous nucleating behavior of such particles. We also noted faster spherulitic growth and increasing K_g (the model parameter). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of ZnO nanoparticles on the cure characteristics and mechanical properties of carboxylated nitrile rubber

Zinc oxide (ZnO) nanoparticles assembled in one dimension to give rod‐shaped morphology were synthesized. The effect of these ZnO nanoparticles (average particle size ～ 50 nm) as the curing agent for carboxylated nitrile rubber was studied with special attention to cure characteristics, mechanical properties, dynamic mechanical properties, and swelling. These results were compared with those of the conventional rubber grade ZnO. The study confirmed that the ZnO nanoparticles gave a better state of cure and higher maximum torque with a marginal decrease in optimum cure time and scorch time. The mechanical properties also showed an improvement. There was an increase in tensile strength by ～ 120%, elongation at break by ～ 20%, and modulus at 300% elongation by ～ 30% for the vulcanizate cured with ZnO nanoparticles, as compared with the one containing rubber grade ZnO. Dynamic mechanical analysis revealed that the vulcanizates exhibited two transitions—one occurring at lower temperature due to the T_g of the polymer, while the second at higher temperature corresponding to the hard phase arising due to the ionic structures. The second transition showed a peak broadening because of an increase in the points of interaction of ZnO nanoparticles with the matrix. The tan δ peak showed a shift towards higher T_g in the case of ZnO nanoparticle‐cured vulcanizate, indicating higher crosslinking density. This was further confirmed by volume fraction of rubber in the swollen gel and infrared spectroscopic studies. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Evaluation of toughening mechanisms of polypropylene/ethylene–octene copolymer/maleic anhydride‐grafted poly(ethylene‐co‐octene)/clay nanocomposite

The toughness of a polypropylene (PP)/ethylene‐octene copolymer (EOC)/maleic anhydride‐grafted poly(ethylene‐co‐octene) (EOC‐g‐MA)/clay nanocomposite and blends of PP/EOC and PP/EOC/EOC‐g‐MA was investigated using Charpy impact and single‐edge‐notch tensile (SENT) tests. In order to understand the toughening mechanisms, impact fracture surfaces and damage zones of single‐edge‐notch samples were studied with scanning electron microscopy and transmission optical microscopy, respectively. It was observed that the addition of EOC‐g‐MA to PP/EOC blend led to improvements in both impact strength and fracture energy of SENT tests because of the enhanced compatibility of the blend, which resulted from reduced EOC particle size and improved interfacial adhesion, and the decreased crystallinity of PP. The incorporation of clay to PP/EOC/EOC‐g‐MA blend caused a further increase of the toughness, owing to the greater decrease in the size of elastomer particles, to the presence of clay tactoids inside the elastomer phase and presumably to debonding of clay layers during the low‐speed SENT tests. The results of microscopic observations showed that the main toughening mechanism in PP/EOC/EOC‐g‐MA blend and PP/EOC/EOC‐g‐MA/clay nanocomposite is crazing. Copyright © 2012 Society of Chemical Industry     

Fabrication of poly(lactic acid) nano‐ and microparticles using a nanomixer via nanoprecipitation or emulsion diffusion

In order to investigate the influence of mixing flow condition on particle generation, poly(lactic acid) (PLA) particles were fabricated at different mixing velocities (10–50 m s^?1) using a nanomixer through either the nanoprecipitation or the emulsion diffusion method. With a nanomixer (Couette–Taylor mixing geometry modified with cavitations), particles became smaller as the mixing velocity increased as long as the temperature was kept below the glass transition temperature (T_g) of PLA. Even in the emulsion diffusion method, it led to the formation of PLA nanoparticles in a short emulsification time (～1 min) and the mean diameter was less than 100 nm with deviation less than 10% (100 nm ± 10%). However, at high mixing velocity, the particle size was rapidly increased which was enhanced as mixing time increased. Dissipation rapidly increased the temperature inside the mixer above T_g of PLA, which caused smaller particles to agglomerate to form larger micron‐sized particles. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46199.     

Structure and properties of polypropylene/hydrotalcite nanocomposites

This article presents the study of the modification of the particle/matrix interface region and its effects on the structure and dynamic mechanical behavior of polypropylene (PP)/hydrotalcite nanocomposites prepared by melt extrusion. The interface modification was promoted by combinying the organophillization of the hydrotalcite particles with blending the PP with a maleic anhydride‐grafted‐PP (PP‐g‐MAH) or a maleic anhydride‐grafted‐poly(styrene‐co‐ethylenebutylene‐co‐styrene) (SEBS‐g‐MAH). Sodium dodecyl sulphate was used to promote the organophillization of the hydrotalcite particles. X‐ray diffraction (XRD) and transmission electron microscopy (TEM) showed a partially exfoliated hydrotalcite structure, with an increasing exfoliation being achieved by adding a compatibilizer and organo‐modifying the particles. Values of the Young's modulus (E), storage modulus (E′), maximum tensile strength (σ_max), neck propagation strength (σ_neck), and elongation at break (ε_b) were found to depend both on the nature of the particle matrix interface as well as on the type of compatibilizer. Also, nanocomposites prepared with the organophillized particles showed lower T_g and loss factor values. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Coincorporation of nano‐silica and nano‐calcium carbonate in polypropylene

In this study, various polypropylene (PP) nanocomposites were prepared by melt blending method. The effects of different spherical nanofillers, such as 50 nm CaCO₃ and 20 nm SiO₂, on the linear viscoelastic property, crystallization behavior, morphology and mechanical property of the resulting PP nanocomposites were examined. Rheological study indicated that coincorporation of nano‐SiO₂ and nano‐CaCO₃ favored the uniform dispersion of nanoparticles in the PP matrix. Differential scanning calorimeter (DSC) and polarizing optical microscopy (POM) studies revealed that the coincorporation of SiO₂ and CaCO₃ nanoparticles could effectively improve PP crystallizability, which gave rise to a lower supercooling temperature (ΔT), a shorter crystallization half‐life (t_1/2) and a smaller spherulite size in comparison with those nanocomposites incorporating only one type of CaCO₃ or SiO₂ nanoparticles. The mechanical analysis results also showed that addition of two types of nanoparticles into PP matrix gave rise to enhanced performance than the nanocomposites containing CaCO₃ or SiO₂ individually. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of composition and component structure on thermal behavior and miscibility of polypropylene catalloys

The thermal behavior and the miscibility of an in‐situ polypropylene blend named polypropylene catalloys (PP‐cats) were investigated by using modulated differential scanning calorimeter (MDSC). It is found that all PP‐cats samples present two glass transitions, one of which is ascribed to the ethylene‐propylene random copolymer (EPR), and the other, to isotactic polypropylene (PP). However, no glass transition of ethylene‐propylene block copolymer (E‐b‐P) responsible for a third component in PP‐cats could be found. With the increase of EPR, the glass transition temperatures responding to PP and EPR components, T_g, _PP and T_g, _EPR, shift to low temperature, because of the enhancement of the interaction between PP and EPR component and the increase of ethylene content in EPR, respectively. Furthermore, the difference between T_g, _PP and T_g, _EPR remarkably decreases with the increase of the total ethylene content in PP‐cats, which indicates that the miscibility of PP‐cats is strongly dependent on the composition. Comparing the T_g, _PP and T_g, _EPR with T_g of fractionated PP and EPR, we ascribe the T_g change of PP fraction to the increase of EPR content; while that of EPR, to the increase of ethylene content in EPR. These experimental results suggest that the existence of E‐b‐P plays an important role in improving the miscibility between propylene homopolymer and EPR in PP‐cats. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

New synthesis methods for polypropylene‐co‐ethylene‐propylene rubber

In this research, the reinforcement of polypropylene (PP) was studied using a new method that is more practical for synthesizing polypropylene‐block‐poly(ethylene‐propylene) copolymer (PP‐co‐EP), which can be used as a rubber toughening agent. This copolymer (PP‐co‐EP) could be synthesized by varying the feed condition and changing the feed gas in the batch reactor system using Ziegler–Natta catalysts system at a copolymerization temperature of 10°C. The ¹³C‐NMR tested by a 21.61‐ppm resonance peak indicated the incorporation of ethylene to propylene chains that could build up the microstructure of the block copolymer chain. Differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and dynamic mechanical analysis (DMA) results also confirmed these conclusions. Under these conditions, the morphology of copolymer trapped in PP matrix could be observed and the copolymer T_g would decrease when the amount of PP‐co‐EP was increased. DMA study also showed that PP‐co‐EP is good for the polypropylene reinforcement at low temperature. Moreover, the PP‐co‐EP content has an effect on the crystallinity and morphology of polymer blend, i.e., the crystallinity of polymer decreased when the PP‐co‐EP content increased, but tougher mechanical properties at low temperature were observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3609–3616, 2007     

Effect of weakly interacting nanofiller on the morphology and viscoelastic response of polyolefins

Effect of silica nanofiller on the deformation response and morphology of low‐ and high‐density polyethylene (HDPE, LDPE) and isotactic polypropylene (PP) modified with fumed silica was investigated. The dynamic‐mechanical thermal spectroscopy, differential scanning calorimetry, optical microscopy, and density measurements were carried out to determine the temperature dependence of storage and loss moduli as well as nanocomposite morphology. It was demonstrated that the degree of matrix reinforcement is considerably affected by the extent of matrix crystallinity, especially, in the temperature range from (T_m–130°C) to T_m. Based on experimental evidence and literature review, it is proposed that this phenomenon may be attributed to the alpha‐mechanical relaxation process occurring above matrix T_g. As a result of adding silica into the melted matrix, mobility of chains in contact with silica particles became reduced. This caused substantial changes in morphology of these semicrystalline nanocomposites. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Influence of oil contents in dynamically cured natural rubber and polypropylene blends

Mechanical, dynamic, thermal, and morphological properties of dynamically cured 60/40 NR/PP TPVs with various loading levels of paraffinic oil were investigated. It was found that stiffness, hardness, tensile strength, storage shear modulus, complex viscosity, glass transition temperature (T_g) of the vulcanized rubber phase, degree of crystallinity and crystalline melting temperature (T_m) of the polypropylene (PP) phase decreased with increasing loading levels of oil. This is attributed to distribution of oil into the PP and vulcanized rubber domains causing oil‐swollen amorphous phase and vulcanized rubber domains. An increasing trend of elastic response in terms of tension set and damping factor was observed in the TPVs with loading levels of oil in a range of 0–20 phr. It is supposed that a major proportion of oil was first preferably migrated into the PP phase and caused an abrupt decreasing trend of degree of crystallinity and T_m of the PP phase. The dispersed vulcanized rubber domains remained small as particles with a low degree of swelling. Increasing loading levels of oil higher than 20 phr caused a decreasing trend of elongation at break and elastomeric properties. Saturation of oil in the PP phase was expected and the excess oil was transferred to the rubber phase which thereafter caused larger swollen vulcanized rubber domains. The remaining amount of oil was able to separate as submicron pools distributed in the PP matrix. This caused lowering of T_g, T_m, crystallinity of PP phase as well as strength, elastomeric, and dynamic properties of the TPVs. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Supermolecular morphology of polypropylene filled with nanosized silica

The supermolecular morphology of injection‐molded SiO₂/polypropylene (PP) nanocomposites was investigated via thin sections analyzed under polarized light and the systematic development of an appropriate etching technique, which allowed the study of the supermolecular morphologies with light microscopy (LM) and high‐resolution field emission scanning electron microscopy (FESEM). In parallel, information regarding the dispersion, distribution state, and morphology of SiO₂ particles was investigated via transmission electron microscopy (TEM) and scanning electron microscopy (SEM) of the ion‐polished and fractured surfaces of SiO₂‐filled PP. The TEM/SEM results demonstrated an almost homogeneous dispersion and distribution of SiO₂ particle agglomerates in the PP matrix. With polarized transmitting LM, reflecting LM, and FESEM, the spherulitic structure of the nanocomposites could be visualized to obtain information on the nanoparticle influence on the crystallization and structural behavior. The size and size distribution of the spherulites analyzed with transmitting light (thin sections) and reflecting light (etched specimens) showed an excellent correlation. With increasing filler loading, the mean size of the spherulites decrease as did the degree of crystallinity. This was a clear indication that the particles acted as nucleation agents and, on the other hand, hindered the arrangement of the molecules during the crystallization. As a result, the particles were most likely located in three areas: the center of the spherulites, the areas between the highly crystalline branches, and the spherulite boundaries. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39655.     

PET/PP blending by using PP‐g‐MA synthesized by solid phase

In attempts to improve the compatibility of polypropylene (PP) with polyethylene terephthalate (PET), a maleic anhydride grafted PP (PP‐g‐MA) was evaluated as a compatibilizer in a blend of 30/70 wt % PP/PET. PP‐g‐MA was produced from isotactic homopolymer PP utilizing the technique of solid phase graft copolymerization. Qualitative confirmations of the grafting were made by Fourier transform infrared spectroscopy (FTIR). Three different weight percent of compatibilizer, PP‐g‐MA, i.e., 5, 10, and 15 wt % have been used in PP/PET blends. The compatibilizing efficiency for PP/PET blend was examined using differential scanning calorimetry (DSC), optical microscopy (OM), scanning electron microscopy (SEM) of crycrofractured surfaces, and energy dispersive X‐ray spectrum (EDAX). The results show that the grafted PP promotes a fine dispersed phase morphology, improves processability, and modifies the crystallization behavior of the polyester component. These effects are attributed to enhance phase interaction resulting in reduced interfacial tension. Also, the results show that the compatibilizing effects of the three amounts of grafted PP in blend are different and dependent on the amount used. Adding 10 wt % of compatibilizer into blend produced the finest dispersed morphology. Elemental analysis results show that PP is matrix. DSC determination revealed that the melting temperature (T_m) of the PET component declined to some extent by comparison with neat PET. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 3986–3993, 2007     

Thermal and mechanical properties of a polypropylene nanocomposite

An experimental polypropylene (PP) nanocomposite, containing approximately 4 wt % of an organophilic montmorillonite clay, was prepared and characterized, and its properties were compared with those of talc‐filled (20–40 wt %) compositions. Weight reduction, with maintained or even improved flexural and tensile moduli, especially at temperatures up to 70°C, was a major driving force behind this work. By a comparison with the analytical data from a nylon 6 (PA‐6) nanocomposite, it was found that the PP nanocomposite contained well‐dispersed, intercalated clay particles; however, X‐ray diffraction, transmission electron microscopy, dynamic mechanical analysis, and permeability measurements confirmed that exfoliation of the clay in PP was largely absent. The increased glass‐transition temperature (T_g) of a PA‐6 nanocomposite, which possessed fully exfoliated particles, indicated the molecular character of the matrix–particle interaction, whereas the PP nanocomposite exhibited simple matrix–filler interactions with no increase in T_g. The PP nanocomposite exhibited a weight reduction of approximately 12% in comparison with the 20% talc‐filled PP, while maintaining comparable stiffness. Undoubtedly, considerable advantages may be available if a fully exfoliated PP nanocomposite is fabricated; however, with the materials available, a combination of talc, or alternative reinforcements, and nanocomposite filler particles may provide optimum performance. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1639–1647, 2003     

Does morphology stick? Tailored particle morphologies by swelling polymerization process

Structured dispersion particles suitable for pressure sensitive adhesives (PSA) were synthesized via swelling polymerization technique (EP 359562). Particles consisting of poly(n‐butyl acrylate) copolymerized with different types of carboxylic acids were used as seeds. The final particles were synthesized by swelling polymerization process, using 6 wt % styrene or 6 wt % methyl methacylate. The resulting particle morphology was analyzed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). From previous works (Coll Surf A 2001, 183–185, 725–737; J Appl Polym Sci 2004, 91, 2610–2623) where two‐step emulsion polymerization was used on similar particles, it is expected that the particle morphology is affected by the polarity of the monomer used for swelling polymerization because of the phase compatibility (thermodynamic parameter). In this work, the seed particles used were always of a glass transition temperature (T_g) below polymerization temperature. The diffusion of the growing polymer chains from the swelling polymerization is therefore mainly affected by their own T_g and the influence of the carboxy groups on the chain length of the entering radicals (kinetic parameter). The different morphologies of the single particles are discussed qualitatively. The effects of reaction parameters are compared with the results given in the previous work. The structure of the corresponding dispersion films was characterized using AFM. Correlations to macroscopic properties such as the cohesive strength and peel adhesion to different substrates are discussed. The results are also compared with the application properties of the corresponding unmodified particles, statistical copolymers, and to blends with small sized PMMA or PS particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1444–1455, 2006     

The influence of the compatibilizer on the morphology and thermal properties of polypropylene‐layered double hydroxide composites

Polypropylene (PP)/layered double hydroxide (LDH) composites were prepared via melt‐compounding using both a carbonate‐LDH and an organo‐LDH (dodecyl benzene sulfonate DBS‐LDH) in different concentrations. Transmission electron microscopy and X‐ray diffraction analysis were used to investigate the morphology. The results showed that only by using DBS‐LDH the intercalation of polymer chains and a partial delamination were obtained. However, the introduction of maleic anhydride‐grafted polypropylene (PP‐g‐MAH), as coupling agent, favored the aggregation of the particles generating localized domains of aggregates. The thermo‐gravimetric analysis showed that PP/DBS‐LDH composites have a higher thermal stability than the pure matrix. Differential scanning calorimetry evidenced that both LDH and DBS‐LDH particles acted as nucleating agents increasing the crystallization temperature, even if, in the case of LDH the effect was observed only with the addition of the compatibilizer. The results collected by dynamic mechanical thermal analysis, beyond showing a significant increase of the matrix stiffness by incorporation of DBS‐LDH, evidenced an increase of the PP glass transition temperature (T_g) indicating a restriction of PP chain segment mobility due to the strong polymer‐particle interactions. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Optimization of Dielectric Constant of Polycarbonate/Polystyrene Modified Blend by Ceramic Metal Oxide

We modified a polycarbonate (PC)/polystyrene (PS) blend by loading alumina (Al₂O₃) into the blend. X-ray diffraction (XRD) shows a decrease in crystallinity. The optical microscopy and atomic force microscopy (AFM) confirms the homogeneous dispersion of alumina. The differential scanning calorimetry (DSC) data shows improved results in glass transition (T_g) and melting temperature (T_m) of blend systems. The electrical properties of polymer blends modified by Al₂O₃ were studied as a function of frequency (50 Hz–35 MHz) at 323 K. The alumina showed a significant effect in resulting in a high dielectric constant with low dielectric loss and dissipation factor.     

Synthesis and properties of polystyrene‐g‐mSiO2 filled polypropylene nanocomposites

Hydrophobically modified nanosilica was prepared from tetraethoxysilane (TEOS) and γ‐methacryloxypropyltrimethoxysilane (MPS) by a two step sol‐gel process. The polystyrene‐grafted‐modified nanosilica (PS‐g‐mSiO₂) hybrid particles were prepared by grafting polystyrene onto the resulting hydrophobically modified nanosilica by dispersion polymerization. The hybrid nanoparticles were subsequently used as the filler to fabricate polypropyrene (PP) nanocomposites. The crystallization kinetics, crystal morphology and crystallization phase component of PS‐g‐mSiO₂/PP nanocomposite were studied using a differential scanning calorimeter (DSC), polarizing optical microscopy (POM) and X‐ray diffraction (XRD). Crystallization half life (t_1/2) decreased, while the Arami exponent (n) of PS‐g‐mSiO₂/PP nanocomposite increased compared with that of virgin PP. A rheological study allowed the unambiguous characterization of the dispersibility of nanosilicas in PS‐g‐mSiO₂/PP nanocomposite. The storage modulus, melt viscosity and the elongation to break of the PS‐g‐mSiO₂/PP nanocomposite were found to be strongly dependent on the grafting of PS on nanosilicas. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Control of monodisperse particle size of styrenic–acrylate copolymers in dispersion copolymerization

Syntheses of monodisperse poly[(styrene)‐co‐(n‐butyl acrylate)] and poly[(styrene)‐co‐(2‐ethylhexyl acrylate)] were carried out by dispersion polymerization. The reactions were performed in the mixed solvent of ethanol–water in the presence of azo‐bisisobutyronitrile and poly(N‐vinylpyrrolidone) as the initiator and dispersant, respectively. The effects of reaction parameters, that is the type and concentration of dispersant, ratio of the mixed solvent, reaction temperature, agitation rate, monomer composition between styrene and n‐butyl acrylate or 2‐ethylhexyl acrylate, crosslinking agent and reaction time on the particle size, size distribution and average molecular weights of the resulting copolymer were thoroughly investigated. The resulting copolymer particles were smooth on their spherical surface and the sizes were in the range 0.6–1.8 µm with a narrow size distribution. In most cases, a correlation between small particle sizes with high average molecular weights was observed. The average particle size generally increased with increasing reaction temperature, time and acrylate monomer content. In contrast, the particle size decreased as the molecular weight, concentration of dispersant, polarity of the medium or agitation rate was increased. The glass transition temperature (T_g) of the copolymers can be controlled by the mole ratio of the comonomer. The T_g values decreased when the content of acrylate monomers in the copolymer increased, and T_g values of the synthesized copolymer were in the range 66–102 °C. Instead of using n‐butyl acrylate monomer in the copolymerization, 2‐ethylhexyl acrylate copolymerization with styrene resulted in insignificant changes in the particle sizes but there were significant decreases in T_g values. In this study, the monodisperse particles can be obtained by monitoring the appropriate conditions regarding PVP K‐30 (2–8 wt%), ethanol/water (90/10 wt%), the reaction temperature (70 °C) and the agitation rate (100 rpm). © 2000 Society of Chemical Industry     

Effect of silica nanoparticle size on toughening mechanisms of filled epoxy

The addition of silica nanoparticles (23 nm, 74 nm, and 170 nm) to a lightly crosslinked, model epoxy resin, was studied. The effect of silica nanoparticle content and particle size on glass transition temperature (T_g), coefficient of thermal expansion (CTE), Young's modulus (E), yield stress (σ), fracture energy (G_IC) and fracture toughness (K_IC), were investigated. The toughening mechanisms were determined using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and transmission optical microscopy (TOM). The experimental results revealed that the addition of silica nanoparticles did not have a significant effect on T_g or the yield stress of epoxy resin, i.e. the yield stress and T_g remained constant regardless of silica nanoparticle size. As expected, the addition of silica nanoparticles had a significant impact on CTE, modulus and fracture toughness. The CTE values of nanosilica-filled epoxies were found to decrease with increasing silica nanoparticle content, which can be attributed to the much lower CTE of the silica nanoparticles. Interestingly, the decreases in CTE showed strong particle size dependence. The Young's modulus was also found to significantly improve with addition of silica nanoparticles and increase with increasing filler content. However, the particle size did not exhibit any effect on the Young's modulus. Finally, the fracture toughness and fracture energy showed significant improvements with the addition of silica nanoparticles, and increased with increasing filler content. The effect of particle size on fracture toughness was negligible. Observation of the fracture surfaces using SEM and TOM showed evidence of debonding of silica nanoparticles, matrix void growth, and matrix shear banding, which are credited for the increases in toughness for nanosilica-filled epoxy systems. Shear banding mechanism was the dominant mechanism while the particle debonding and plastic void growth were the minor mechanisms.