Spark plasma sintering of (5RE.2)Ta3O9 high-entropy ceramics and their thermal properties

Six rare-earth tantalate high-entropy ceramics of (5RE_.2)Ta₃O₉ (RE represents any five elements selected from La, Ce, Nd, Sm, Eu, Gd) were designed and prepared by spark plasma sintering process at 1400°C in this study. The (5RE_.2)Ta₃O₉ ceramics only consist of a single-phase solid solution with perovskite structure. Their relative densities are all above 90%, and the average grain size is in the range of 1.47–2.92 μm. The thermal conductivity of (5RE_.2)Ta₃O₉ ceramics is in 2.24–1.90 W m⁻¹ K⁻¹ (25°C–500°C), which is much lower than that of yttria-stabilized zirconia. In six samples, (La_.2Nd_.2Sm_.2Gd_.2Eu_.2)Ta₃O₉ possesses a thermal conductivity of 1.90 W m⁻¹ K⁻¹, a thermal expansion coefficient of 3.47 × 10⁻⁶ K⁻¹ (500°C), a Vickers hardness of about 7.33 GPa, and a fracture toughness of about 5.20 MPa m^1/2, which are suitable for its application as thermal barrier coatings.     

Novel (Sm0.2Lu0.2Yb0.2Y0.2Dy0.2)3TaO7 high-entropy ceramic for thermal barrier coatings

A novel (Sm_0.2Lu_0.2Dy_0.2Yb_0.2Y_0.2)₃TaO₇ (SLT-5RE_0.2) oxide with a single-fluorite structure was synthesized via an optimized sol-gel and sintering method, and its crystal structure, mechanical and thermophysical properties were investigated. The results indicate that the calcined nanoscale powder is of high crystallinity, and bulk sample is of a uniform elemental distribution. Compared to YSZ (6–8 wt.% Y₂O₃ partially stabilized by ZrO₂), SLT-5RE_0.2 exhibits lower Young's modulus, less mean acoustic velocity, and higher Vickers microhardness. Owing to the strengthened anharmonic vibration and phonon scattering, SLT-5RE_0.2 exhibits low thermal conductivity (1.107 W K^?1·m^?1, 900 °C). The high thermal expansion coefficient (11.3 × 10^?6 K^?1, 1200 °C) of SLT-5RE_0.2 ceramic can be ascribed to the reduced lattice energy and ionic spacing as well as the cocktail effect of high-entropy ceramics. The excellent mechanical and thermophysical properties, and excellent phase steadiness during the whole testing temperature cope, indicate that SLT-5RE_0.2 high-entropy ceramic can be a candidate material for thermal barrier coatings.     

High-entropy rare-earth disilicate (Lu0.2Yb0.2Er0.2Tm0.2Sc0.2)2Si2O7: A potential environmental barrier coating material

A new high-entropy ceramic (Lu_0.2Yb_0.2Er_0.2Tm_0.2Sc_0.2)₂Si₂O₇ ((5RE_0.2)₂Si₂O₇) was proposed as a potential environmental barrier coating (EBC) material for ceramics matrix composites in this work. Experimental results showed that the (5RE_0.2)₂Si₂O₇ synthesized by solid-phase sintering was a monoclinic solid solution and had good phase stability proved by no obvious absorption/exothermic peak in the DSC curve from room temperature to 1400 °C. It performed a lower coefficient of thermal expansion (2.08 ×10^?6-4.03 ×10^?6 °C^?1) and thermal conductivity (1.76–2.99 W?m^?1?°C^?1) compared with the five single principal RE₂Si₂O₇. In water vapor corrosion tests, (5RE_0.2)₂Si₂O₇ also exhibited better water vapor corrosion resistance attributed to the multiple doping effects. The weight loss was only 3.1831 × 10^?5 g?cm^?2 after 200 h corrosion at 1500 °C, which was lower than that of each single principal RE₂Si₂O₇. Therefore, (5RE_0.2)₂Si₂O₇ could be regarded as a remarkable candidate for EBCs.     

Solvothermal-derived multicomponent rare-earth cerate ceramics toward remarkable thermophysical properties

The multicomponent rare-earth cerate (Y_0.2La_0.2Nd_0.2Sm_0.2Eu_0.2)₂Ce₂O₇ (5RE₂Ce₂O₇) ceramics were successfully fabricated through solvothermal method and the following calcination process. The microstructure and phase composition of the as-obtained products were systematically characterized via SEM, TEM and XRD techniques. The results showed that the as-synthesised 5RE₂Ce₂O₇ has a single-phase fluorite-type crystal structure with the particle size of approximately 200 nm. Furthermore, the as-synthesised 5RE₂Ce₂O₇ demonstrated lower thermal conductivity (1.9–1.26 W m^?1·K^?1 at 25–1000 °C), higher thermal expansion coefficients (CTEs, 12.48 × 10^?6 K^?1 at 1000 °C), and outstanding mechanical properties including large Young's modulus (248.0 ± 0.35 GPa) and high fracture toughness (2.4 ± 0.21 MPam^1/2). The excellent properties of the as-synthesised 5RE₂Ce₂O₇ demonstrates its potential application as a new type of next-generation TBCs.     

Phase evolution and thermal stability of novel high-entropy (Mo0.2Nb0.2Ta0.2V0.2W0.2)Si2 ceramics

Owing to the high melting points and high-temperature stability, transition-metal disilicides are potential components for aerospace, automotive, and industrial engineering applications. However, unwanted oxidation known as PEST oxidation severely limits their application owing to the formation of volatile transition metal oxides, especially in the temperature range of 500–1000 °C. To overcome this problem, a new class of high-entropy disilicides, (Mo_0.2Nb_0.2Ta_0.2V_0.2W_0.2)Si₂, was selected by first-principles calculations and then successfully fabricated using a hot-pressing sintering technique. Furthermore, the phase evolution, thermal expansion behavior, thermal conductivity, and oxidation behavior were systematically investigated. Compared with MoSi₂, (Mo_0.2Nb_0.2Ta_0.2V_0.2W_0.2)Si₂ possessed a lower thermal conductivity (10.9–14.7 W·m^?1·K^?1) at 25–1000 °C, higher thermal expansion coefficients (8.6 ± 1.3^–6 K^–1) at 50–1200 °C, and especially an excellent thermal stability at 500–1000 °C owing to slow diffusion and selective oxidation. This work provides a strong foundation for the synthesis and application of high-entropy disilicides.     

High-entropy ferroelastic rare-earth tantalite ceramic: (Y0.2Ce0.2Sm0.2Gd0.2Dy0.2)TaO4

In this study, high-entropy rare-earth tantalate ceramics (Y_0.2Ce_0.2Sm_0.2Gd_0.2Dy_0.2)TaO₄ ((5RE_0.2)TaO₄) have been successfully fabricated. The possibility of formation of (5RE_0.2)TaO₄ was verified via first-principles calculations. In addition, the phase structure, ferroelastic toughening mechanism, thermophysical, and mechanical properties were systematically investigated. The (5RE_0.2)TaO₄ ceramics have lower phonon thermal conductivity (1.2–2.6 W·m^–1·K^–1) in the entire temperature range than that of RETaO₄ and YSZ. (5RE_0.2)TaO₄ has a higher fracture toughness and lower brittleness index than YSZ. The thermal expansion coefficients of (5RE_0.2)TaO₄ are as high as 10.3 × 10^-6 K^–1 at 1200°C and Young's modulus is 66–189 GPa, and thus, (5RE_0.2)TaO₄ possesses great potential for application in thermal barrier coatings (TBCs).     

High-entropy yttrium pyrochlore ceramics with glass-like thermal conductivity for thermal barrier coating application

A₂B₂O₇-type oxides with low thermal conductivities are potential candidates for next-generation thermal barrier coatings. The formation of high-entropy ceramics is considered as a newly effective way to further lower their thermal conductivities. High-entropy Y₂(Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)₂O₇ (5HEO) and Y₂(Ti_0.25Zr _0.25Hf_0.25Ta_0.25)₂O₇ (4HEO) ceramics were prepared by in situ solid reaction sintering, considering the important roles of B-site cations on thermal conductivities of the A₂B₂O₇-type oxides. Reaction process, phase structures, microstructures, and thermal conductivities of the as-sintered ceramics were investigated. Lattice distortion effects on their thermal conductivities were also discussed by using the proposed criterion based on the supercell volume difference of the individual compounds. Near fully-dense 5HEO and 4HEO ceramics were obtained after being sintered at 1600°C. The former one had a dual-phase structure containing high-entropy Y₂(Ti_0.227Zr_0.227Hf_0.227Nb_0.136Ta_0.182)₂O_7.318 pyrochlore oxide (5HEO-P) and Y(Nb, Ta)O₄ solid solution, while the latter one was a single-phase pyrochlore oxide (4HEO-P) with homogeneous element distribution. The formed 5HEO-P oxide has larger lattice distortion than 4HEO-P oxide due to the larger total amounts of Nb and Ta cations at B sites in the 5HEO-P oxide. It results in lower thermal conductivity of 5HEO ceramics (keeping at 1.8 W·m^–1·K^–1) than those of 4HEO ceramics (ranging from 1.8 to 2.5 W·m^–1·K^–1) at temperatures from 25°C to 1400°C. Their glass-like thermal conductivities were determined by the selection of B site cations and high-entropy effects. These results provide some useful information for the material design of novel thermal barrier coating materials.     

Highly porous (La1/5Nd1/5Sm1/5Gd1/5Yb1/5)2Zr2O7 ceramics with ultra-low thermal conductivity

The high-entropy rare earth zirconate (La_1/5Nd_1/5Sm_1/5Gd_1/5Yb_1/5)₂Zr₂O₇ porous ceramics ((5RE_1/5)₂Zr₂O₇ PCs) were prepared using a foam-gel casting-freeze drying method combined with segmented calcination process. The results of SEM, TEM, and XRD analyses of the (5RE_1/5)₂Zr₂O₇ PCs indicated the formation of a defective fluorite crystal structure, with the rare earth elements homogeneously distributed. Meanwhile, the as-prepared (5RE_1/5)₂Zr₂O₇ PCs exhibited high porosity, low bulk density, low thermal conductivity, and relatively high compressive strength. Moreover, the high-temperature thermal conductivity of the samples was evaluated, and the results showed that the (5RE_1/5)₂Zr₂O₇ PCs maintain a thermal conductivity of 0.150 ± 0.002 W m^?1 K^?1 even at 1000 °C. The strategy used in this paper can be extended to the synthesis of other high-entropy porous ceramics with high porosity and low thermal conductivity, which is suitable for applications as thermal insulation materials.     

Sintering,thermal expansion,and thermal transport properties of A4Ta2O9 (A= Ca,Mg) tantalates

Searching for new oxides with low thermal conductivity and high thermal expansion coefficients (TECs) as thermal barrier coatings (TBCs) is vital for the development of highly efficient gas turbines and aeroengines. We report the densification sintering, high TECs, and low thermal conductivity of A₄Ta₂O₉ (A = Ca, Mg) tantalates. The best sintering temperature of dense A₄Ta₂O₉ ceramics was determined via an optical contact angle tester, and samples with a relative density of 99.8% were synthesized via spark plasma sintering (SPS). The hardness (9–10 GPa), Young's modulus (172.7–211.8 GPa) and fracture toughness (1.5–1.6 MPa m^1/2) of the A₄Ta₂O₉ ceramics are primarily affected by the bonding strength. Furthermore, we studied the thermal transport properties of A₄Ta₂O₉. The low thermal conductivity (1.78–1.93 W m^?1 K^?1 at 900 °C), extraordinary phase stability, and high TECs (11.4–11.8 × 10^?6 K^?1 at 1200 °C) of A₄Ta₂O₉ ceramics make them candidate TBCs with high operating temperatures.     

Oxidation behavior of high-entropy carbide (Hf0.2Ta0.2Zr0.2Ti0.2Nb0.2)C at 1400–1600 °C

Oxidation behavior of high-entropy carbide (Hf_0.2Ta_0.2Zr_0.2Ti_0.2Nb_0.2)C (HTZTNC) was investigated over temperature range of 1400–1600 °C. Results showed improved oxidation resistance of high-entropy carbide compared with individual carbide ceramics. In oxide layer, Ta₂O₅ and Nb₂O₅ were found to be dominant phases at 1400 °C, whereas ZrTiO₄ and HfTiO₄ were main phases obtained at 1500 and 1600 °C. Moreover, these complex dense oxide layer structures on the surface of HTZTNC at high temperature led to excellent oxidation resistance. The observation of Ti-depleted layer at 1500 and 1600 °C after 20 min of oxidation indicated that oxidation mechanism involved outward diffusion of titanium oxide, which was further confirmed by reoxidation experiments. In sum, these findings are promising for future development of high-entropy ultrahigh temperature ceramics with good oxidation resistance.     

Marked reduction in the thermal conductivity of (La0.2Gd0.2Y0.2Yb0.2Er0.2)2Zr2O7 high-entropy ceramics by substituting Zr4+ with Ti4+

The (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ (x = 0–0.5) high-entropy ceramics were successfully prepared by a solid state reaction method and their structures and thermo-physical properties were investigated. It was found that the high-entropy ceramics demonstrate pure pyrochlore phase with the composition of x = 0.1–0.5, while (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂Zr₂O₇ shows the defective fluorite structure. The sintered high-entropy ceramics are dense and the grain boundaries are clean. The grain size of high-entropy ceramics increases with the Ti⁴⁺ content. The average thermal expansion coefficients of the (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ high-entropy ceramics range from 10.65 × 10^?6 K^?1 to 10.84 × 10^?6 K^?1. Importantly, the substitution of Zr⁴⁺ with Ti⁴⁺ resulted in a remarkable decrease in thermal conductivity of (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ high-entropy ceramics. It reduced from 1.66 W m^?1 K^?1 to 1.20 W m^?1 K^?1, which should be ascribed to the synergistic effects of mass disorder, size disorder, mixed configuration entropy value and rattlers.     

Orthorhombic to tetragonal polymorphic transformation of YTa3O9 and its inhibition through the design of high-entropy (Y0.2La0.2Ce0.2Nd0.2Gd0.2)Ta3O9

To explore the mechanism of phase transformation, YTa₃O₉ was prepared by an integrated one-step synthesis and sintering method at 1500 °C using Y₂O₃ and Ta₂O₅ powders as starting materials. High-temperature XRD patterns and Raman spectra showed that a phase transformation from orthorhombic to tetragonal took place in YTa₃O₉ through the bond length and angle changes at 300–400 °C, which caused a thermal conductivity rise. To inhibit the phase transformation, a high-entropy (Y_0.2La_0.2Ce_0.2Nd_0.2Gd_0.2)Ta₃O₉ (HE RETa₃O₉) was designed and synthesized at 1550 °C using the integrated solid-state synthesis and sintering method. In tetragonal structured HE RETa₃O₉, phase transformation was inhibited by the high-entropy effect. Furthermore, HE RETa₃O₉ exhibited low thermal conductivity, and its tendency to increase with temperature was alleviated (1.69 W/m·K, 1073 K). Good phase stability, low thermal conductivity and comparable fracture toughness to YSZ make HE RETa₃O₉ promising as a new thermal barrier coating material.     

New class of high-entropy defect fluorite oxides RE2(Ce0.2Zr0.2Hf0.2Sn0.2Ti0.2)2O7 (RE = Y,Ho, Er,or Yb) as promising thermal barrier coatings

High-entropy ceramics exhibit great application potential as thermal barrier coating (TBC) materials. Herein, a series of novel high-entropy ceramics with RE₂(Ce_0.2Zr_0.2Hf_0.2Sn_0.2Ti_0.2)₂O₇ (RE₂HE₂O₇, RE = Y, Ho, Er, or Yb) compositions were fabricated via a solid-state reaction. X-ray diffraction (XRD) and energy dispersive spectrometry (EDS) mapping analyses confirmed that RE₂HE₂O₇ formed a single defect fluorite structure with uniform elemental distribution. The thermophysical properties of the RE₂HE₂O₇ ceramics were investigated systematically. The results show that RE₂HE₂O₇ ceramics have excellent high-temperature phase stability, high thermal expansion coefficients (10.3–11.7 × 10^?6 K^-1, 1200 ℃), and low thermal conductivities (1.10-1.37 W m^-1 K^-1, 25 ℃). In addition, RE₂HE₂O₇ ceramics have a high Vickers hardness (13.7–15.0 GPa) and relatively low fracture toughness (1.14-1.27 MPa m^0.5). The outstanding properties of the RE₂HE₂O₇ ceramics indicate that they could be candidates for the next generation of TBC materials.     

Effects of Yb and Sc co-doping on the thermal properties and CMAS corrosion of garnet-type (Y3-xYbx)(Al5-xScx)O12 ceramics

Thermal barrier coatings with excellent thermal performance and corrosion resistance are essential for improving the performance of aero-engines. In this paper, (Y_3-xYb_x)(Al_5-xSc_x)O₁₂ (x = 0, 0.1, 0.2, 0.3) thermal barrier coating materials were synthesized by a combination of sol-gel method and ball milling refinement method. The thermal properties of the (Y_3-xYb_x)(Al_5-xSc_x)O₁₂ ceramics were significantly improved by increasing Yb and Sc doping content. Among designed ceramics, (Y_2.8Yb_0.2)(Al_4.8Sc_0.2)O₁₂ (YS-YAG) showed the lowest thermal conductivity (1.58 Wm^?1K^?1, at 800 °C) and the highest thermal expansion coefficient (10.7 × 10^?6 K^?1, at 1000 °C). In addition, calcium-magnesium- aluminum -silicate (CMAS) corrosion resistance of YS-YAG was further investigated. It was observed that YS-YAG ceramic effectively prevented CMAS corrosion due to its chemical inertness to CMAS as well as its unique and complex structure. Due to the excellent thermal properties and CMAS corrosion resistance, YS-YAG is considered to be prospective material for thermal barrier coatings.     

Single-phase rare-earth high-entropy zirconates with superior thermal and mechanical properties

Emerging of high-entropy ceramics has brought new opportunities for designing and optimizing materials with desired properties. In the present work, high-entropy rare-earth zirconates (La_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)₂Zr₂O₇ and (Yb_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)₂Zr₂O₇ are designed and synthesized. Both high-entropy ceramics exhibit a single pyrochlore structure with excellent phase stability at 1600 °C. In addition, the Yb-containing system possesses a high coefficient of thermal expansion (10.52 × 10^?6 K^-1, RT～1500 °C) and low thermal conductivity (1.003 W·m^-1 K^-1, 1500 °C), as well as excellent sintering resistance. Particularly, the Yb-containing system has significantly improved fracture toughness (1.80 MPa·mm^1/2) when compared to that of lanthanum zirconate (1.38 MPa·mm^1/2), making it a promising material for thermal barrier coatings (TBCs) applications. The present work indicates that the high-entropy design can be applied for further optimization of the comprehensive properties of the TBCs materials.     

A new type of Sr(Zr0.2Hf0.2Ce0.2Yb0.2Me0.2)O3−x (Me = Y,Gd) high-entropy ceramics used in thermal barrier coatings

Seeking for new ceramics with excellent thermophysical properties as thermal barrier coatings candidate materials has become a hot research field. In this study, Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x high-entropy ceramic powders were successfully synthesized by the method of solid-state reaction, and the ceramics with single phase were prepared by pressureless sintering at 1600°C. The phase composition, microstructure, element distribution, high-temperature thermal stability, and thermophysical properties of the ceramics were studied. The results showed that Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x ceramics were composed of SrZrO₃ phase and the second phase of AB₂O₄ spinel (i.e., SrY₂O₄ and SrGd₂O₄). The content of the second phase was gradually increased after heat treatment at 1400°C, which significantly improved the thermophysical and mechanical properties of the ceramics. The microhardness and fracture toughness of the ceramics were improved compared with that of SrZrO₃. The thermal conductivities of Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x (Me = Y, Gd) ceramics were 1.30 and 1.28 W m⁻¹ K⁻¹ at 1000°C, which were about 35% and 40% lower than that of SrZrO₃ (1.96 W m⁻¹ K⁻¹) and yttria-stabilized zirconia (2.12 W m⁻¹ K⁻¹), respectively. The thermal expansion coefficients of Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x (Me = Y, Gd) ceramics were 12.8 × 10⁻⁶ and 14.1 × 10⁻⁶ K⁻¹ at 1300°C, respectively, which was more closer to the superalloys compared with SrZrO₃ ceramic (11.0 × 10⁻⁶ K⁻¹).     

Hardness and toughness improvement of SiC-based ceramics with the addition of (Hf0.2Mo0.2Ta0.2Nb0.2Ti0.2)B2

The influences of different contents ranging 0–15 wt% of high-entropy boride (HEB) (Hf_0.2Mo_0.2Ta_0.2Nb_0.2Ti_0.2)B₂ on the mechanical properties of SiC-based ceramics using Al₂O₃-Y₂O₃ sintering additives sintered by spark plasma sintering process were investigated in this study. The results showed that the introduction of 5 and 10 wt% (Hf_0.2Mo_0.2Ta_0.2Nb_0.2Ti_0.2)B₂ could facilitate the densification and the grain growth of SiC-based ceramics via the mechanism of liquid phase sintering. However, the grain growth of SiC-based ceramics was inhibited by the grain boundary pinning effect with the addition of 15 wt% (Hf_0.2Mo_0.2Ta_0.2Nb_0.2Ti_0.2)B₂. The SiC-based ceramics with 15 wt% (Hf_0.2Mo_0.2Ta_0.2Nb_0.2Ti_0.2)B₂ showed the enhanced hardness (21.9±0.7 GPa) and high toughness (4.88±0.88 MPa·m^1/2) as compared with high-entropy phase-free SiC-based ceramics, which exhibited a hardness of 16.6 GPa and toughness of 3.10 MPa·m^1/2. The enhancement in mechanical properties was attributed to the addition of higher hardness of HEB phase, crack deflection toughening mechanism, and presence of residual stress due to the mismatch of coefficient of thermal expansion.     

Multi-component strategy for remarkable suppression of thermal conductivity in strontium diyttrium oxide: The case of high-entropy Sr(Y0.2Sm0.2Gd0.2Dy0.2Yb0.2)2O4 ceramic

Anti-spinel oxide SrY₂O₄ has attracted extensive attention as a promising host lattice due to its outstanding high-temperature structural stability and large thermal expansion coefficient (TEC). However, the overhigh thermal conductivity limits its application in the field of thermal barrier coatings. To address this issue, a novel high-entropy Sr(Y_0.2Sm_0.2Gd_0.2Dy_0.2Yb_0.2)₂O₄ ceramic was designed and synthesized for the first time via the solid-state method. It is found that the thermal conductivity of Sr(Y_0.2Sm_0.2Gd_0.2Dy_0.2Yb_0.2)₂O₄ is reduced to 1.61 W·m⁻¹·K⁻¹, 53 % lower than that of SrY₂O₄ (3.44 W·m⁻¹·K⁻¹) at 1500 °C. Furthermore, reasonable TEC (11.53 ×10⁻⁶ K⁻¹, 25 °C ∼ 1500 °C), excellent phase stability, and improved fracture toughness (1.92 ± 0.04 MPa·m^1/2) remained for the high-entropy Sr(Y_0.2Sm_0.2Gd_0.2Dy_0.2Yb_0.2)₂O₄ ceramic, making it a promising material for next-generation thermal barrier coatings.     

Tuning stoichiometry of high-entropy oxides for tailorable thermal expansion coefficients and low thermal conductivity

Thermal barrier coating materials with proper thermal expansion coefficient (TEC), low thermal conductivity, and good high-temperature stability are of great significance for their applications in next-generation turbine engines. Herein, we report a new class of high-entropy (La_0.2Sm_0.2Er_0.2Yb_0.2Y_0.2)₂Ce_xO_3+2x with different Ce⁴⁺ contents synthesized by a solid-state reaction method. They exhibit different crystal structures at different Ce⁴⁺ content, including a bixbyite single phase without Ce⁴⁺ doping (x = 0), bixbyite-fluorite dual-phase in the RE₂O₃-rich region (0 < x < 2), and fluorite single phase in the stoichiometric (x = 2) and CeO₂-rich region (x > 2). The high-entropy (La_0.2Sm_0.2Er_0.2Yb_0.2Y_0.2)₂Ce_xO_3+2x exhibit tailorable TECs at a large range of 9.04 × 10^–6–13.12 × 10^–6 °C^–1 and engineered low thermal conductivity of 1.79–2.63 W·m^–1·K^–1. They also possess good sintering resistance and high-temperature phase stability. These results reveal that the high-entropy (La_0.2Sm_0.2Er_0.2Yb_0.2Y_0.2)₂Ce_xO_3+2x are promising candidates for thermal barrier coating materials as well as thermally insulating materials and refractories.     

Effect of Ta5+ doping on the thermal physical properties of defective fluorite Y3NbO7 ceramics

The effects of substituting the B cation in A₃BO₇ ceramics on their thermal physical properties were investigated by applying a large mass difference. Y₃(Nb_1-xTa_x)O₇ (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) ceramics were synthesized, and their structural characteristics were determined. All the fabricated Y₃(Nb_1-xTa_x)O₇ ceramics showed defective fluorite structures and glass-like low thermal conductivity (1.18−2.04 W/m∙K at 25°C) because of the highly distorted crystal structure and significant mass difference. Substitution with Ta⁵⁺ enhanced the sintering resistance, leading to superior thermal-insulating performance via grain boundary scattering. Furthermore, the ceramics exhibited excellent coefficients of thermal expansion, implying the promising applicability of Y₃(Nb_1-xTa_x)O₇ as new thermal barrier materials. The effect of mass difference on the thermomechanical properties of the ceramics was examined, suggesting a simple strategy for engineering the chemical composition of new thermal barrier materials.