涌浪作用下港内波况试验研究

基于秘鲁钱凯港的防波堤三维整体模型试验结果,研究了涌浪绕射、透射联合作用对港内波况的影响.分析了不同波向、不同谱峰周期的入射波条件下港内不同功能区的波况分布规律,并对比分析了具有不同周期的入射波对港内不同区域波高的影响,兼顾分析了波向的影响.结果表明,在涌浪作用下,受透射、绕射影响,不同入射波条件下港内比波高分布规律相...     

不同波长下KCS船运动响应与波浪增阻数值研究

准确预报船舶在波浪中的运动和力可以为船舶性能评估提供参考。采用naoe-FOAM-SJTU求解器,数值模拟固定和放开垂荡、纵摇自由度的KCS船在不同波长的迎浪规则波中的运动。首先运用数值造波方法生成不同波浪周期的Stokes一阶深水规则波,与Stokes波的理论值对比确保造波的准确性;然后计算固定或放开垂荡和纵摇自由度的KCS船在0.65 ≤ λ/L（波长/船长）≤1.95的遭遇波中的运动和阻力,研究KCS船的波浪增阻中绕射和辐射成分,且采用傅里叶分析法研究了运动与阻力的线性和非线性成分分布。结果表明,波浪绕射增阻受波长的影响不大,当波长接近船长时,船舶的垂荡和纵摇幅值以及波浪增阻均达到峰值,这主要由船体剧烈运动引起的辐射增阻导致,应避免船舶在此工况下航行。     

涌浪环境中铺管船横摇机理及模型试验研究

"海洋石油201"号等多艘铺管船在东海海域进行铺管施工时受低频涌浪环境影响横摇运动强烈,严重影响了正常铺管作业。为了分析铺管船横摇过大的原因,从理论上分析了铺管船可能发生较大横摇的波浪条件,并对"海洋石油201"号铺管船在遭遇波浪周期等于横摇固有周期1/2倍和1倍,不同波高的规则波中航向角分别为0°、30°、60°和90°时的运动特性进行了模型试验。试验结果表明铺管船遭遇周期为其横摇固有周期一半的涌浪时未发生参数横摇,而遭遇与其横摇固有周期接近的涌浪时发生谐摇是导致其横摇运动过大的原因。研究成果与相应的气象资料结合,可为铺管船施工气候窗口的选择提供依据。     

港口内靠码头系泊船运动的计算

本文以英国南海岸处Ｓｈｏｒｅｈａｍ港内系泊船为例，研究了港口内靠码头系泊船运动的数值计算问题。该船的实船实验和模型实验已经完成，为验证本文计算结果提供了依据。运动方程在时域内求解。在计算船体脉冲响应函数时，引入了船体阻尼系数在频率很低时的渐近表达式和一迭代算法。分析了港内共振波浪和其对船体的作用力。讨论了靠码头系泊船运动的非线性特征。计算结果与实验结果符合很好。     

新型半潜式海上风力机基础水动力特性研究

概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大.     

畸形波作用下锚泊方柱系泊张力特性研究

基于物理模型试验,探究畸形波和不规则波作用下浮体系泊张力差异问题。讨论相对波高、相对周期和畸形波参数α₁对系泊张力的影响。结果显示:畸形波参数α₁和浮体系泊张力显著相关。在α₁=2.0～2.83范围内,畸形波作用下迎浪侧系泊张力最大值可达不规则波作用的1.9倍。在相对波高H_s/d=0.032～0.097范围内,畸形波作用下迎浪侧系泊张力最大值显著大于不规则波的作用结果,但畸形波和不规则波对应的1/3值及平均值几乎一致。就相对周期影响而言,迎浪侧系泊张力最大差别出现在谱峰周期T_p0p范围内。频域方面采用小波分析方法讨论畸形波和不规则波作用下浮体系泊张力时频谱特征,两种波浪作用下系泊张力时频特征有显著差别。     

船舶随浪运动隐性仿真计算

本文利用Ｌｉａｐｕｎｏｖ理论，研究了船舶在规划波良运动的稳性；利用摄动理论，求解出船舶运动响应；并讨论了船舶横摇与垂荡运动频率、最大横摇角和波浪要素对稳性曲线ＧＺ的影响，以及流体动压力对稳性曲线的修正，从而给计算船舶在随浪中的稳性提供了一种。方法。     

双体波浪能装置运动及系泊系统特性研究

波浪能是一种清洁、可再生的新型能源,波浪能发电装置在海上作业时会受到变化的风、浪、流载荷作用,需要系泊系统保证其稳性和安全性。以适用于中国南海500 m水深的振荡双浮体式波浪能发电装置为研究对象,运用频域计算与时域计算结合的方法对双浮体及其系泊系统的运动响应和动力载荷进行计算,获取极端海况与工作海况下浮体运动和系泊缆索张力的时历数据。参照BV船级社NR-493规定的海上浮式结构物系泊安全系数规范,对3种系泊方案进行安全校核和对比分析。选定其中一种系泊方案,通过改变系泊系统以及能量转换器（PTO）的参数,探究参数变化对双体波浪能装置运动响应以及系泊系统特性的影响,为类似应用于深水的双体波浪能装置系泊系统的设计提供参考。     

瘫船稳性第二层薄弱性衡准研究

基于IMO第二代完整稳性草案中瘫船稳性第二层薄弱性衡准的有关研究,分析草案提出的简化计算方法,采用一个单自由度船舶横摇运动微分方程,利用例船CEHIPAR2792数据,编译相应程序,求得不规则横风横浪作用下瘫船横摇运动相应特征,进而计算特定海况下的倾覆概率及特定海区的平均倾覆指数,并与草案值进行对比。分析不同拟合扶正力臂曲线方法和剩余稳性高对计算结果的影响,并对瘫船稳性第二层薄弱性衡准方法进行修改。     

两层流体中内波作用下Spar平台运动响应

研究两层流体中Spar平台在内波作用下的运动响应问题。在线性势流理论框架,提出在内波作用下Spar平台运动响应及分段式悬链线系泊张力特性的计算方法。数值分析两层流体内界面位置、入射内波的波长以及系泊索初始预张力对Spar平台运动响应及其系泊索张力特性的影响规律,结果表明内波对Spar平台纵摇运动响应的影响是小的,但对Spar平台纵荡与垂荡运动响应及其系泊索张力的影响是不可忽视的。因此,在Spar平台的设计中,考虑内波的影响是重要的。     

Cause and countermeasure of long-period oscillations of moored ships and the quantification of surge and heave amplitudes

Long-period oscillations of moored ships whose periods are about 1 or 2 min cause many troubles in many ports and harbours. It is necessary to investigate these phenomena and verify their causes and countermeasures in each case because they are strongly dependent on the environment of each port and harbour. From this point of view, long-period oscillations of moored ships in the Port of Shibushi in Japan were investigated by means of wave observations, the image processing of moored ship motions using the video camera and motion-capture software and numerical simulations. From observation results, the relationship between offshore long-period waves and long-period oscillations of moored ships was recognized and surge and heave amplitudes were quantified by using wave data in order to forecast moored ship motions. Furthermore, from observation and numerical results, it was revealed that long-period waves with the peak period of 120 s from the offshore typhoon kept or exaggerated the local harbour oscillation of 60–70 s and it caused long-period oscillations of moored ships. Numerical results in case of reducing the reflection coefficient of the target berth implied that it ceased the local harbour oscillation and it would give an effective countermeasure to reduce long-period oscillations of moored ships in the Port of Shibushi.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

Slow drift oscillations of a ship in irregular waves

A procedure to calculate horizontal slow drift excitation forces on an infinitely long horizontal cylinder in irregular beam sea waves is presented. The hydrodynamic boundary-value problem is solved correctly to second order in wave amplitude. Results in the form of second order transfer functions are presented for different two-dimensional shapes. It is concluded that Newman's approximative method is a practical way to calculate slow drift excitation forces on a ship in beam sea and suggested that it may be used in a more general case. Applications of the results for moored ships are discussed.     

Experimental Study on Allowable Berthing and Mooring Conditions of An Oil Tanker

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎａｔａｎｋｅｒｉｓｂｅｒｔｈｅｄｏｒｍｏｏｒｅｄｔｏａｎｏｃｅａｎｐｌａｔｆｏｒｍ ,ｗｈｉｃｈｉｓｕｓｕａｌｌｙｉｎｏｐｅｎｓｅａｓ,ｔｈｅｔａｎｋｅｒｗｉｌｌｓｕｆｆｅｒｆｏｒｃｅｓｇｅｎｅｒａｔｅｄｂｙｗａｖｅｓ ,ｗｉｎｄａｎｄｃｕｒｒｅｎｔ.Ｉｎｍｏｓｔｏｆｔｈｅｐｒｅｖｉｏｕｓｓｔｕｄｉｅｓ ,ｔｈｅｉｎ ｆｌｕｅｎｃｅｏｆｃｕｒｒｅｎｔｏｒｔｈｅｃｏｍｂｉｎｅｄｗａｖｅａｎｄｃｕｒｒｅｎｔｗａｓｃｏｎｓｉｄｅｒｅｄｔｏｂｅｔｈｅｍａｉｎｏｂｊｅｃｔ.Ｉｎｓ…     

Dynamics of a moored barge under regular and random waves

Developments in the study of wave forces and construction techniques in deep water by the offshore oil industry have increased the use of marine terminals at deep water locations. A thorough understanding of moored ship dynamics when subjected to waves, wind and current combined with the use of flexible mooring lines would help to design berthing terminals for exposed areas. In this paper, the three dimensional problem of wave interactions with a barge moored to a single point is dealt with, based on the finite element method. The effect of flexibility of the mooring line and the point of mooring on the response of the barge as well as the mooring line tension is investigated. The paper compares the numerical results with model tests carried out on a barge moored to a fixed support under regular and random waves in head sea. The effect of stiffness of the mooring line on the barge response for different mooring points is discussed, which would be useful for the designers. The effect of viscous damping is also considered. The analytical results are in good agreement with the experimental results in both regular and random waves.     

不规则波作用下的船舶撞击作用

随着波谱理论研究的发展,各种海工结构及船舶的荷载及其内力分析也日趋应用不规则波的计算方法。目前对于外海码头在波浪作用下的船舶撞击荷载还应用规则波的研究方法,对其应用不规则波分析方法的途径以及在考虑波谱作用后会有怎样的结果等问题目前还较少研究。本文试图对此问题进行初步的分析。     

Model experiments on moored ships

At present the position keeping of ocean going vessels, offshore service vessels, etc., is performed by mooring systems to resist external forces under severe environments consisting of wave, current and wind. A variety of mooring systems are employed depending on the shape, principal dimensions, etc., of the vessels in addition to the surrounding conditions of the water areas. Ocean going ships are moored to the shore structures through a multiple system of moorings. The determination of the forces in the cables is essential for the design of moorings and the berthing structures. However, the ships engaged for offshore operations are moored by the mooring cables, spread around the ships with the other ends of the moorings anchored to the sea bed. In these cases, the required number and length of cables can be arrived for a given ship of known dimensions and environmental conditions. With the increased overall dimensions of the vessels, it is necessary to conduct a study on enhancing the accuracy in estimating the mooring system performance. Hence, the present work is mainly intended to carry out model tests to investigate the behaviour of moored ships that are subjected to wave and current loadings. These model experiments were conducted in a 30 m × 2 m × 1 m wave-current flume at the Ocean Engineering Centre, Indian Institute of Technology, Madras.     

Time-domain simulation of berthing problem between FPSO and shuttle tanker in waves

A time-domain simulation method based on potential flow model has been developed to investigate the berthing problem between two floating bodies in wave. The boundary value problem is formulated with respect to an earth-fixed coordinate system because the relative positions of the two vessels continuously change during the berthing operation. The classical finite element method is used to solve the Laplace equation in the fluid domain with moving boundary. The linearized free-surface boundary conditions are integrated in time by applying 4th-order Adams–Bashforth–Moulton method. A simple re-mesh algorithm with local and global mesh systems is introduced to update mesh by considering large horizontal movement of the berthing vessel. The developed numerical method is used to investigate the berthing problem between a FPSO and shuttle tanker in waves. The focus is on the wave-induced motion response during the berthing process. The characteristics of the motion responses in berthing operation are examined with various wave frequencies, berthing speeds and wave headings.     

大型泊位设计中的水流问题——以宝钢马迹山港为例

本文以宝钢马迹山２５万吨级矿石中转港码头设计中所遇到的水流问题为例,通过对研究水域的水流性质以及泊位、船舶、水流三者之间关系的初步分析,认为水流尽管与风、浪一样不致船舶结构破坏,但一定时段内却可能对其靠泊造成困难,而水流作用于系泊中船舶并传递给码头结构物的荷载,以及水流与波浪相互作用使得波流要素改变则是设计中必需考虑的。最后,作者对港口设计和运作提出建议,以期相类似水深流急地区建设大型泊位时能有所借鉴。     

浅水中浮体在波浪作用下运动的三维时域计算模型

港口中系泊船在波浪作用下运动问题的本质是浅水波浪与浮体的相互作用。与深水情况不同,浅水问题应当考虑水底、水域边界的影响及浅水波浪自身的特性,单一模型很难实现该模拟过程。为此,建立了Boussinesq方程计算入射波和Laplace方程计算散射波的全时域组合计算模型。有限元法求解的Boussinesq方程能使入射波充分考虑到水底、水域边界的影响和浅水波浪的特性;散射波被线性化,采用边界元法求解,并以浮体运动时的物面条件为入射波和散射波求解的匹配条件。该方法为完全的时域方法,计算网格不随时间变动,计算过程较为方便。通过与实验及其他数值方法的结果进行比较,验证了本模型对非线性波面、浮体的运动都有比较理想的计算结果,显示了本模型对非线性问题具有较好的计算能力。