Ultra‐compact 4‐port DR antenna for multi‐input multi‐output standards

Here, an ultra‐compact Multi‐Input‐Multi‐Output (MIMO) antenna system is presented for Wireless Local Area Network (WLAN) applications. The proposed antenna compactness approach is based on using Cylindrical‐Dielectric‐Resonator‐Antenna (CDRA) symmetry with the help of image theory to achieve the best size reduction of the resonators and maintain the resonance frequency of the original CDRA. The electric/magnetic walls approach is utilized to miniaturize the size by exploring the symmetry and antisymmetry of the resonant mode. First, a CDRA for MIMO system is designed and tested in terms of return loss and radiation efficiency. Then, two configurations of MIMO‐Antennas (two and four ports) are examined by using the same substrate size. The 2‐port‐MIMO antenna is built from two half‐CDRs (HCDRs) facing each other. Similarly, four‐quarter‐CDRs (QCDRs) are created to form a 4‐port MIMO antenna system. As a result, a 75% size reduction is achieved (size of 30 × 30 × 7.62 mm³). The measured impedance bandwidth for the 4‐port MIMO antenna is 5.4% (5.4‐5.7 GHz), with more than 15 dB isolation levels. Proper levels of Envelope Correlation Coefficients (ECCs) are also achieved (1 × 10^?2‐4 × 10^?2), with a channel capacity loss (CCL) of 0.04 bits/S/Hz. The proposed MIMO antennas are suitable for compact wireless communication systems.     

Compact 2 × 2/4 × 4 tapered microstrip feed MIMO antenna configuration for high‐speed wireless applications with band stop filters

In this research, compact tapered feed 2 × 2/4 × 4 MIMO antenna are presented and investigated. The proposed MIMO antenna consists of a square patch and modified rectangular ground, which is chamfered at edges and etched with two semicircular slots. Likewise, obstruction caused by WiMAX and WLAN interfering bands is also taken care of by introducing notched filters. WiMAX is removed by embedding an rotated T‐type stub and a C‐type slot eliminates the WLAN band. The proposed antenna configuration covers the usable bandwidth of 3.07 to 11.25 GHz for 2 × 2 MIMO and 2.97 to 11.28 GHz for 4 × 4 MIMO. Also, both the MIMO antennas provide isolation <–20 dB. Proposed MIMO antennas are fabricated and characterized in near, far‐field, and diversity performance where envelope correlation coefficient, directive gain (DG), total active reflection coefficient (TARC), and channel capacity loss are simulated and measured. 4 × 4 MIMO antenna configuration provides stable gain with a maximum radiation efficiency of 91% and monopole radiation patterns.     

Polarization diversity enabled flexible directional UWB monopole antenna for WBAN communications

This article presents the design of an ultra‐wideband (UWB) quasi‐circular monopole antenna with directional characteristics for use in wireless body area network (WBAN) applications. The proposed antenna has hybrid geometry and it is constructed using a semicircular and square patch on a very thin substrate of thickness 0.2 mm. The antenna has a compact geometry with a footprint of 30 × 20 mm. The proposed antenna covers 3.1 to 10.6 GHz with a measured peak gain of 5.37 dBi at 6 GHz. The proximity effect of the human body is resolved by incorporating the reflector behind the antenna. The antenna with reflector provides a directional pattern with a measured peak gain of 8.84 dBi at 6 GHz. Further to improve the link reliability between the sensor and the cluster head in WBAN, polarization diversity technique is adopted and the performance metrics are evaluated. The proposed flexible antenna simultaneously offers large gain and high impedance bandwidth. The prototype antenna is fabricated and the simulation results are validated using experimental measurements. The measurement results are in good agreement with the simulation results.     

A miniaturized multi‐wideband Quasi‐Yagi MIMO antenna system

A multi‐band directional multiple‐input–multiple‐output (MIMO) antenna system is presented based on a rectangular loop excited Quasi‐Yagi configuration. A 64% reduction in size is obtained using a rectangular meandered element as well as a small ground plane. The proposed two‐element MIMO antenna system covers the Telemetry L‐band and several LTE/WLAN bands. It has a wide measured bandwidth of 689 MHz (1.897–2.586 GHz) in the desired band centered at 2 GHz, and a measured bandwidth of more than 168 MHz across rest of the bands. The MIMO antenna system has a total size of 45 × 120 × 0.76 mm³, with a single element size of 55 × 60 × 0.76 mm³. The non‐desired back‐lobe radiation which is obtained using a small ground plane, is significantly reduced by using a novel defected ground structure (DGS) as compared with the complex techniques present in literature. The proposed DGS provides a high measured front‐to‐back ratio of 14 dB at 2 GHz and 11 dB in other bands. A maximum measured realized gain of 5.8 dBi is obtained in the desired band using a single parasitic director element. The proposed MIMO antenna system has a minimum measured radiation efficiency of 70%, isolation of 12 dB, and envelope correlation coefficient of 0.098 within all bands which ensures very good MIMO performance.     

Compact planar frequency reconfigurable multiple‐input‐multiple‐output antenna with pattern and polarization diversity characteristics for WiFi and WiMAX standards

A compact planar frequency reconfigurable dual‐band multiple‐input‐multiple‐output (MIMO) antenna with high isolation and pattern/polarization diversity characteristics is presented in this article for WiFi and WiMAX standards. The MIMO configuration incorporates two symmetrically placed identical antenna elements and covers overall size of 24 mm × 24 mm × 0.762 mm. Reconfiguration of each antenna element is achieved by using a PIN diode which allows antennas to switch from state‐1 (2.3‐2.4 GHz and 4.6‐5.5 GHz) to state‐2 (3.3‐3.5 GHz and 4.6‐5.5 GHz). In state‐1, the configuration offers isolation ≥18 dB and 20 dB in lower band (LB) and upper band (UB) respectively; whereas, in state‐2, isolation ≥21 dB and 20 dB in LB and UB respectively is achieved. The same decoupling circuit provides high isolation in dual‐band of two states, which makes overall size of the proposed design further compact. The antennas are characterized in terms of envelope correlation coefficient, radiation pattern, gain, and efficiency. From measured and simulated results, it is verified that the proposed frequency reconfigurable dual‐band multi‐standard MIMO antenna design shows desirable performance in both operating bands of each state and compact size of the design makes it suitable for small form factor devices used in future wireless communication systems.     

Design and analysis of a quad‐band substrate‐integrated‐waveguide cavity backed slot antenna for 5G applications

A planar and compact substrate integrated waveguide (SIW) cavity backed antenna and a 2 × 2 multi‐input multi‐output (MIMO) antenna are presented in this study. The proposed antenna is fed by a grounded coplanar waveguide (GCPW) to SIW type transition and planned to be used for millimeter‐wave (mm‐wave) fifth generation (5G) wireless communications that operates at 28, 38, 45, and 60 GHz frequency bands. Moreover, the measured impedance bandwidth (|S₁₁| ≤ ? 10 dB ) of the antenna covers 27.55 to 29.36, 37.41 to 38.5, 44.14 to 46.19, and 57.57 to 62.32 GHz bands and confirms the quad‐band characteristic. Omni‐directional radiation characteristics are observed in the far‐field radiation pattern measurements of the antenna over the entire operating frequency. The reported antenna is compact in size (9.7 × 13.3 × 0.6 mm³) and the gain values at each resonance frequency are measured as 3.26, 3.28, 3.34, and 4.51 dBi, respectively. Furthermore, the MIMO antenna performance is evaluated in terms of isolation, envelope correlation coefficient and diversity gain.     

A compact proximity‐fed 2.4 GHz monostatic antenna with wide‐band SIC characteristics for in‐band full duplex applications

This article presents a dual polarized, proximity‐fed monostatic patch antenna (single radiator for both transmit and receive modes) with improved interport isolation for 2.4 GHz in‐band full duplex (IBFD) applications. The proximity‐fed radiating patch offers comparatively wider impedance bandwidth for presented design. Very nice self‐interference cancelation (SIC) levels for intended impedance bandwidth have been achieved through differential receive (R_x) mode configuration. The differential R_x mode based on 180° ring hybrid coupler acts as a signal inversion mechanism for effective suppression or cancelation of in‐band self‐interference (SI) that is, the leakage from transmit port. The implemented prototype of proposed antenna achieves ≥87 dB peak isolation for dual polarized IBFD operation. Moreover, the recorded interport isolation for validation model ≥60 dB within 10 dB‐return loss bandwidth of 90 MHz (2.36‐2.45 GHz). The measured radiation characteristics of implemented antenna demonstrate nice gain and low cross‐polarization levels for both transmit (T_x) and receive (R_x) modes. The dimensions of implemented antenna are 70 × 75 × 4.8 mm³. The novelty of this work is wide‐band SIC performance for monostatic antenna configuration with compact structure of presented design.     

Performance enhancement of nested hexagonal ring‐shaped compact multiband integrated wideband fractal antennas for wireless applications

In this paper, nested hexagonal ring‐shaped fractal antennas are designed and investigated which are different from each other in patch orientation. Initially, the multiband integrated wideband hexagonal nested ring antenna is designed (antenna‐I). To improve the multiband/wideband behavior, the patch orientation of antenna‐I is changed to ?60°/60° (antenna‐II), ?120°/120° (antenna‐III), and ?180°/180° (antenna‐IV). Antennas are designed on low cost FR‐4 glass epoxy substrate with relative permittivity of 4.4 and overall dimension 30 × 30 × 1.6 mm³. Comparison among antennas have been made and found that the antennas with negative orientation exhibit better results in terms of bandwidth, impedance matching, number of frequency bands, and gain. Designed antennas have been compared with each other and found that antennas‐II and III are better in performance as compared to antennas‐I and IV. Antenna‐II exhibits wider bandwidth of 1.26 (2.52‐3.78 GHz), 2.75 (4.03‐6.78 GHz), and 6.1 GHz (7.82‐13.92 GHz) with maximum gain of 7.14 dB. Similarly; antenna‐III exhibits the bandwidth of 340 MHz (1.92‐2.26 GHz), 820 MHz (3.04‐3.86 GHz), 4230 MHz (5.38‐9.61 GHz), and 3040 MHz (10.41‐13.45 GHz) with a maximum gain of 6.19 dB. Prototype of the designed antennas with satisfactory orientations are fabricated and tested for the validation of results. Simulated and measured results are also juxtaposed and observed in good agreement with each other. Antennas exhibit bidirectional and omnidirectional pattern in E‐plane and H‐plane, respectively, also the radiation efficiency of antennas are in acceptable range from 75% to 95%. Due to the wider bandwidth of designed antennas, they can be used for different wireless standards such as Advance Wireless Services AWS‐1, AWS‐2, AWS‐3, Wi‐MAX, WLAN, X‐band satellite communication, point‐to‐point wireless applications, ITU band, military satellite communication, television broadcasting, and military land and airborne systems.     

Design of compact multiband pattern diversity antenna for WiMax,LTE and WLAN applications

A compact multiband pattern diversity antenna for Multiple input multiple output (MIMO) applications is being proposed. The pattern diversity antenna is designed for 2.6 GHz LTE, 3.5/5.5 GHz WiMax, 3.3 GHz MIMO and 5.2 GHz WLAN applications for mobile devices. The compact size of the MIMO antenna (41.05 × 21.1 mm) is due to having compact individual monopole antennas each of dimension 17.5 × 10 mm. A T-shaped and inverted L-shaped stub in the ground plane reduces mutual coupling due to near field whereas slots introduced in the ground plane prevents current to flow through the common ground plane. The important characteristics of MIMO antenna like diversity gain and envelope correlation coefficient have also been presented. Measured and simulated radiation patterns presented show that the MIMO antenna proposed provide pattern diversity.

     

A spoof surface plasmon leaky‐wave antenna with circular polarization

In this article a circularly polarized (CP) leaky‐wave antenna (LWA) based on spoof surface plasmon (SSP) is proposed. Corrugated circular patches are loaded on either side of the SSP waveguide periodically and asymmetrically, which enables continuous CP beam steering from backward to forward quadrant eliminating “the open stopband” at broadside. The antenna exhibits an impedance bandwidth of 43.5% (<?10 dB) and a 3‐dB axial‐ratio bandwidth of 27.8%; within the impedance bandwidth from 4.5 to 7 GHz the radiation beam can be steered from 120° to 70°. With a ground plane placed underneath, the antenna can achieve average radiation gain and efficiency of about 10 dBic and 84.2%, respectively, showing a radiation gain increase of about 3 dB over that without a ground plane. The proposed SSP‐based CP LWA is expected to find applications in wireless communication systems based on planar antennas.     

Meander line MIMO antenna for 5.8 GHz WLAN application

A four port compact low profile planar MIMO antenna with meander line radiators and with polarization diversity effect has been proposed to cover 5.8 GHz wireless local area network application. The proposed MIMO antenna has ?10 dB impedance bandwidth of 1.4 GHz (5.3–6.7 GHz) along with the compact size of 38 × 38 mm² and an envelope correlation coefficient (ECC) of less than 4 × 10^?4 in the whole band. The proposed antenna resonates at 5.8 GHz frequency, having return loss of ?43.2 dB. The isolation between diagonal and opposite ports is more than 10 and 12 dB, respectively, in the presented frequency band. The total active reflection coefficient frequency response shows more than 1.0 GHz of bandwidth in the whole band. The antenna gain is more than 4.0 dBi in the operating frequency band. The radiating elements are very close to each other to make the design very compact.     

Wide‐bandwidth multifrequency circularly polarized monopole antenna for wireless communication applications

In this article, wideband circularly polarized monopole antennas with multiresonating frequencies are presented for Bluetooth, WLAN, WiMAX, and X‐band applications. The designed antennas have dimensions of 50 × 35 × 1.6 mm³. Two different substrates (FR4‐epoxy and PTFE) are used for fabricating the antennas. The antennas consist of corner truncated I‐shaped and C‐shaped strips excited by a 50 Ω microstrip feed line. The parametric analyses are performed with the help of Ansoft HFSS V.11 EM simulator. Both antennas have been fabricated and measured. The measured percentage bandwidth of the antenna made by FR4 substrate is 31.32% (centered at 1.66 GHz), and 64.85% (centered at 5.69 GHz). The percentage bandwidth of antenna made by PTFE substrate is 20.57% (centered 2.43 GHz) and 68.74% (centered at 7.39 GHz). In addition to that, there exists 3 dB AR bandwidth for LHCP of about 1050 MHz for 5.2 GHz WLAN‐band. The reflection coefficient, radiation patterns, and the gains of both the antennas are studied in detail. It is found that the measured and simulated results are in good agreement.     

A compact six port antenna for better spectrum utilization efficiency in cognitive radio applications

In this article, a novel six port antenna for better spectrum utilization efficiency in cognitive radio (CR) applications is presented. In this six port antenna system, an ultra‐wideband (UWB) sensing antenna and five wideband/narrowband (NB) antennas are integrated on the same substrate in a compact area of 1134 mm² . Antenna associated with port 1, which is meant for sensing, has ?10 dB reflection coefficient bandwidth of 3 to 11 GHz and the antennas associated with ports 2, 3, 4, 5, and 6 have ?10 dB reflection coefficient bandwidths of 3.6 to 5.8 GHz (single band), 2.9 to 3.6 GHz and 5.4 to 7.98 GHz (dual band), 7.95 to 8.38 GHz and 9 to 9.85 GHz (dual band), 8.38 to 9 GHz (single band) and 9.7 to 10.7 GHz (single band), respectively. Minimum isolation of 20 dB is attained between UWB sensing antenna and any narrowband/wideband antenna except between the antennas associated with ports 1 and 2 where minimum isolation of 12 dB is achieved over the operating bandwidth of UWB sensing antenna. Moreover, among all wideband/narrowband antennas, isolation of less than 15 dB is achieved. More importantly, the narrowband and wideband antennas meant for communication cover all frequency bands in UWB and a good match between the simulated and measured results is noticed.     

Compact dual wide‐band four/eight elements MIMO antenna for WLAN applications

A compact four and eight elements multiple‐input‐multiple‐output (MIMO) antenna designed for WLAN applications is presented in this article. The antenna operates in IEEE 802.11b/g WLAN (2.4 GHz), IEEE 802.11 ac/n WLAN (5.2 and 5.8 GHz) and WiMAX (5.8 GHz) bands. The resonated mode of the antenna is achieved by two unequal Reverse‐L shaped, line‐shaped slots on top and parasitic element on the ground layer. The single antenna provides wide bandwidth of about 29% (2.3‐3.1 GHz) in lower and 22% (4.9‐6.1 GHz) in the upper band. The compactness of the single element antenna is found about 95% with respect to the patch and 61% in overall dimension. Thereafter an investigation is carried out to design two, four, and eight elements MIMO antennas. All of the multi‐element structures provide compact configuration and cover entire WLAN frequency ranges (2.4‐2.48 and 5.15‐5.85 GHz). The dimension of the proposed eight element MIMO antenna is 102 × 52 × 1.6 mm³. It covers the frequency (measured) from 2.4 to 3.1 GHz and 5 to 6.1 GHz. The diversity performance of the proposed MIMO antenna is also assessed in terms of the envelope correlation coefficient (ECC), diversity gain (DG), and total active reflection co‐efficient (TARC). The ECC is found <0.5 whereas the DG >9.0 is obtained for the desired bands.     

Compact eight‐port MIMO/diversity antenna with band rejection characteristics

A new compact three‐dimensional multiple‐input‐multiple‐output (MIMO) antenna comprised of eight antenna elements is presented. The unit cell of the proposed MIMO/diversity antenna consists of three elliptical rings connected together in the region close to the feed line and a rectangular‐shaped modified ground plane. To achieve polarization diversity with the proposed eight‐port MIMO configuration, four antenna elements are horizontally arranged and the remaining four are vertically oriented. The proposed antenna has an impedance bandwidth (S₁₁ < ?10 dB) of 25.68 GHz (3.1‐28.78 GHz) with a wireless local area network notch‐band at 5.8 GHz (5.2‐6.5 GHz). In addition to polarization diversity, the proposed antenna provides a reliable link with wireless devices. The prototype antenna design is fabricated and measured for diversity performance. Also, the proposed MIMO antenna provides good performance metrics such as apparent diversity gain, channel capacity loss, envelope correlation coefficient, isolation, mean effective gain, multiplexing efficiency, and total active reflection coefficient.     

Investigation on decoupling of wide band wearable multiple‐input multiple‐output antenna elements using microstrip neutralization line

An investigation to enhance the decoupling between the elements of a compact wide band multiple‐input multiple‐output (MIMO) antenna is presented in this communication. A microstrip neutralization line (NL) is designed on the top of antenna surface to enhance the port isolation. The geometry is embedded on a jeans material to be apposite for the on‐body wearable applications. The antenna covers the frequency spectra from 3.14 to 9.73 GHz (around 102.4%) and fulfills the bandwidth requirements of WiMAX (3.2‐3.8 GHz), WLAN (5.15‐5.35/5.72‐5.85 GHz), C band downlink‐uplink (3.7‐4.2/5.9‐6.425 GHz), downlink defense (7.2‐7.7 GHz), and ITU (8‐8.5 GHz) bands. The port isolation is found to be more than 32 dB over the whole application bands. The antenna is appraised in a rich scattering environment with very minimal envelope correlation coefficient (ECC < 0.12) and great amount of diversity gain (DG > 9.8). The proposed MIMO antenna system is able to achieve the channel capacity loss (CCL) of less than 0.2 BPS/Hz throughout the whole operating band. The proposed structure is etched on an area of 30 × 50 mm². The simulated and measured performances of the proposed antenna are in well‐matched state.     

UWB MIMO antenna implemented with orthogonal quasi‐circular slot dipole radiators

In this paper, a very low‐profile two‐port ultra‐wideband antenna for multiple input‐multiple output applications is proposed. The antenna is implemented by using two orthogonal quasi‐circular slot dipole radiators fed by coaxial lines. The antenna performs from 2 to 10 GHz, with an average peak‐gain of 4 dB, and high port isolation, with values around S₂₁ = ?20 dB and below. The radiation patterns of both antennas are opposite to each other and hence, the diversity gain reaches values around 20 dB. The low inter‐port coupling and low correlation are verified by obtaining the envelope correlation coefficient, which is lower than 0.003. These calculations were made by the S‐parameter and far‐field methods. The total active reflection coefficient shows that the antenna operative bandwidth does not change for different input signals with random phases, preserving the operation from 2 to 10 GHz. The antenna performance is compared to different state of the art slot configurations, showing advantages to previously published work.     

A miniaturized printed monopole antenna for 5.2‐5.8 GHz WLAN applications

In this article, a new design of a compact printed rectangular antenna for wireless local area network (WLAN) applications in 802.11a is investigated. The defected ground structure (DGS) technique is successfully used to reduce the ground plane by cutting a large slot to achieve significant miniaturization. The ground plane structure consists of inverted ‘L’ shape. The rectangular radiating element has a size of 6 × 5 mm² and is connected to a microstrip transmission feed line. The simulated and measured resonance frequency of the single‐band antenna is approximately 5.8 GHz and may cover an impedance bandwidth of 1 GHz for the measurement and 1.65 GHz for the simulation. The simulated and the measured data are in good agreement. The proposed antenna is very compact (10 × 6 mm²) and its impedance bandwidth is suitable for the 5.2‐5.8 GHz WLAN communication systems.     

A modified split ring resonator based printed compact monopole UWB antenna with spiked elliptical radiator having five band rejection features

A coplanar waveguide (CPW) fed printed compact monopole antenna with five band rejection features is presented. Wide bandwidth was achieved by beveling the lower part and adding a modified ellipse on the upper portion of the patch. An inverted circular arc, single circular split ring resonator (SRR) with wide opening and two symmetrical circular single SRRs were embedded for obtaining three stop‐band characteristics. Two symmetrical slits were inculcated in the ground forming defected ground structure (DGS) to get another stop‐band characteristic. Two concentric rectangular modified SRRs were etched to obtain a higher frequency stop‐band feature. The proposed antenna was designed, fabricated, and experimentally tested for the validation of results. The overall dimensions of the proposed antenna were 29 mm × 24 mm × 1.6 mm. The measured impedance bandwidth of the antenna was 2.87 to 13.3 GHz at | S₁₁ |< ? 10 dB. The measured results show that the proposed antenna has five band notches centred at 3.96, 4.35, 5.7, 8.54, and 9.95 GHz to reject WiMAX band (3.65‐4.04 GHz), ARN band (4.29‐5.18 GHz), WLAN band (5.5‐6.9GHz), ITU‐8 band (7.37‐8.87), and amateur radio band (9.2‐10.3 GHz) respectively. The proposed antenna maintains omnidirectional radiation pattern in H‐Plane and dumbbell‐shape radiation pattern in E‐plane. Further, stable gain over the whole UWB except at notched frequency bands was reported.