CPW fed miniaturized dual‐band short‐ended metamaterial antenna using modified split‐ring resonator for wireless application

A miniaturized dual‐band metamaterial (MTM) antenna has been designed in this article. The designed coplanar waveguide fed antenna has composed of inner split‐ring resonator and an outer open ring resonator with rectangular stub. The series parameter of the antenna is used to determine the zeroth order resonance frequency due to short‐ended boundary condition. The whole size of proposed structure is 20 × 25.5 mm². This MTM antenna exhibits dual‐band operation at 3.17 GHz (3.1–3.22 GHz) and 5.39 GHz (5.27–5.47 GHz). The proposed MTM structure achieves measured peak gain of 0.71 and 1.89 dB at 3.17 and 5.39 GHz, respectively. The proposed antenna can be used for recent radio communication in form of S‐band application and Wi‐MAX.     

Design of multi band triangular microstrip patch antenna with triangular split ring resonator for S band,C band and X band applications

With the rapid advancement in multi-functional communication devices, devices capable of operating for more than one frequency bands emerged. Such applications demand for multiband antennas. Wide band antennas are capable of resonating over larger frequency bands, but it limits the impedance bandwidth and gain. So, the solution of this could be compact multi band antennas. A quad band Triangular Microstrip antenna designed for IEEE 802.16e Wi-MAX, IEEE 802.11a WLAN, C band downlink communication and x band radar applications is suggested in this work. The proposed antenna has triangular patch with triangular split ring resonator. The conservativeness and data transfer capacity are the preferred possessions of the suggested antenna. The proposed antenna yields better return and gain by resonating in 3.5 GHz, 4.1 GHz, 5.6 GHz and 9.7 GHz.     

Low profile four‐port super‐wideband multiple‐input‐multiple‐output antenna with triple band rejection characteristics

A quad‐port planar multiple‐input‐multiple‐output (MIMO) antenna possessing super‐wideband (SWB) operational features and triple‐band rejection characteristics is designed. The proposed MIMO configuration consists of four modified‐elliptical‐self‐complementary‐antenna (MESCA) elements, which are excited by tapered co‐planar waveguide (TCPW) feed lines. A radiator‐matched complementary slot is present in the ground conductor patch of each MESCA element. The proposed MIMO antenna exhibits a bandwidth ratio of 36:1 (|S₁₁| < ?10 dB; 0.97‐35 GHz). Further, a step‐like slit‐resonator is etched in the radiator to eliminate interferences at 3.5 GHz. A hexagonal shaped complementary split ring resonator (CSRR) is also loaded on the MESCA radiator to remove interferences at 5.5 and 8.5 GHz. The MIMO antenna is fabricated on FR‐4 substrate of size 63 × 63 mm² and experimental results are found in good agreement with the simulated results. The MIMO antenna exhibits inter‐element isolation >17 dB and envelope correlation coefficient (ECC) <0.01 at all the four ports.     

Compact UWB flexible elliptical CPW‐fed antenna with triple notch bands for wireless communications

A coplanar waveguide (CPW)‐fed flexible elliptical antenna with triple band notched characteristics is presented in this article. The designed antenna consists of an elliptical patch and slots incorporated CPW feed line to cover the bandwidth requirements for ultra‐wideband (UWB) applications. The designed UWB antenna has a fractional bandwidth of about 166.19% (1.20‐13 GHz) with a center frequency of 7.1 GHz in simulation and about 170.10% (1.05‐13 GHz) with a center frequency of 7.025 GHz in measurement. The overall dimension of the proposed flexible antenna is 45 × 35 × 0.6 mm³. The triple notched bands are realized by designing with circular shaped split‐ring‐resonators (SRRs) and defected ground structure (DGS). According to the measurement, first notched band (2.0? 2.70 GHz) is generated for rejecting 2.4 GHz WLAN by introducing a single circular ST‐SRR on the radiating patch. The second notch (3.45‐3.80 GHz) is obtained by embedding another circular ST‐SRR on the patch to mitigate the interference of 3.5 GHz Wi‐MAX system. Finally, due to presence of DGS, third notch (5.15‐6.20 GHz) is produced which suppresses the interference from 5.5 GHz Wi‐MAX and 5.2/5.8 GHz WLAN systems. The proposed antenna offers excellent performance in different flexible conditions that confirm its applicability on curved surfaces for UWB systems.     

Modified octahedron shaped antenna with parasitic loading plane having dual band notch characteristics for UWB applications

The design of a compact modified octahedron shaped dual band notched ultra wide‐band antenna is presented in this article. The impedance bandwidth of the designed antenna has been enhanced by modifying the shape of the radiator by introducing fractal geometry and a modified ground plane. The proposed antenna offered an impedance bandwidth of 2.4 GHz–19.5 GHz (156% Fractional bandwidth). Two rectangular split ring resonator structures are introduced in the radiator to achieve two notched bands which ranges from 3.3 GHz to 3.7 GHz (WiMAX) and 5.15 GHz–5.85 GHz (WLAN) band. The antenna gain varies from 1 to 4 dBi over the operating band except the notched bands. The overall dimension of the designed antenna has a compact size of 33 × 40 mm². The experimental and simulation results are in good agreement. The proposed antenna has wider bandwidth and smaller dimension over the already reported in the literature. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:426–434, 2016.     

A metamaterial hepta‐band antenna for wireless applications with specific absorption rate reduction

Present article embodies the design and analysis of slotted circular shape metamaterial loaded multiband antenna for wireless applications with declination of SAR. The electrical dimension is 0.260 λ × 0.253 λ × 0.0059 λ (35 × 34 × 0.8 mm³) of proposed design, at lower frequency of 2.23 GHz. The antenna consists of circular shape rectangular slot as the radiation element loaded with metamaterial split ring resonator (SRR) and two parallel rectangular stubs, etched rectangular single complementary split‐ring resonator (CSRR) and reclined T‐shaped slot as ground plane. Antenna achieves hepta bands for wireless standards WLAN (2.4/5.0/5.8 GHz), WiMAX (3.5 GHz), radio frequency identification (RFID) services (3.0 GHz), Upper X band (11.8 GHz—for space communication) and Lower K_U band (13.1 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The SRR is responsible for creating an additional resonating mode for wireless application as well as provide the declination in SAR about 13.3%. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

A thin‐layer dielectric and metamaterial unit‐cell stack loaded miniaturized SRR‐based antenna for triple narrow band 4G‐LTE applications

This article presents the design of a miniaturized dual‐band antenna for long‐term evolution (LTE) application is presented. In the basic antenna design, split ring resonator was loaded in the radiating plane of the patch and frequency of resonance was further modified with the help of E‐shaped stub. The antenna has been fabricated using FR‐4 substrate and the measured dual bands at 2.11 and 2.665 GHz are found in a close match with the simulated data. By placing a thin dielectric resonator of permittivity ε _r = 10.2 and thickness of 1.27 mm, two closely spaced narrow bands are obtained at 2.217 and 2.28 GHz. A novel metamaterial unit‐cell having near‐zero refractive index is designed and mounted above the dielectric resonator. This stack configuration generates triple narrow frequency band in the LTE 2 GHz spectrum range. The overall size of the proposed antenna is 20 × 25 mm².     

Fork‐shaped patch printed ultra‐wideband slot antenna with dual band‐notched characteristics using metamaterial unit cells

In this article, a miniaturized fork‐shaped patch ultra‐wideband (UWB) planar wide‐slot antenna with dual band‐notched characteristics is proposed. With fork‐shaped patch, ultra‐wideband impedance matching from 3.1 to 13.2 GHz is easily achieved. Then, two novel and simple methods are applied to solve the difficulty for UWB slot antennas with fork‐shaped patch to realize band‐notched characteristics. By etching one pair of I‐shaped resonators on both branches of the fork‐shaped structure and adding a rectangular single split‐ring resonator in the rectangular openings of fork‐shaped patch, the wireless local area network (WLAN) band from 5.5 to 6.1 GHz and the International Telecommunication Union (ITU) 8 GHz band from 7.9 to 8.7 GHz are rejected, respectively. The coplanar waveguide‐fed UWB antenna is successfully designed, fabricated, and measured. The measured and simulated results show a good agreement. The antenna provides nearly stable radiation patterns, high gains and high radiation efficiency.     

A modified split ring resonator based printed compact monopole UWB antenna with spiked elliptical radiator having five band rejection features

A coplanar waveguide (CPW) fed printed compact monopole antenna with five band rejection features is presented. Wide bandwidth was achieved by beveling the lower part and adding a modified ellipse on the upper portion of the patch. An inverted circular arc, single circular split ring resonator (SRR) with wide opening and two symmetrical circular single SRRs were embedded for obtaining three stop‐band characteristics. Two symmetrical slits were inculcated in the ground forming defected ground structure (DGS) to get another stop‐band characteristic. Two concentric rectangular modified SRRs were etched to obtain a higher frequency stop‐band feature. The proposed antenna was designed, fabricated, and experimentally tested for the validation of results. The overall dimensions of the proposed antenna were 29 mm × 24 mm × 1.6 mm. The measured impedance bandwidth of the antenna was 2.87 to 13.3 GHz at | S₁₁ |< ? 10 dB. The measured results show that the proposed antenna has five band notches centred at 3.96, 4.35, 5.7, 8.54, and 9.95 GHz to reject WiMAX band (3.65‐4.04 GHz), ARN band (4.29‐5.18 GHz), WLAN band (5.5‐6.9GHz), ITU‐8 band (7.37‐8.87), and amateur radio band (9.2‐10.3 GHz) respectively. The proposed antenna maintains omnidirectional radiation pattern in H‐Plane and dumbbell‐shape radiation pattern in E‐plane. Further, stable gain over the whole UWB except at notched frequency bands was reported.     

A compact energy harvesting multiband rectenna based on metamaterial complementary split ring resonator antenna and modified hybrid junction ring rectifier

This article presents an improved wireless energy harvesting multiband rectifying antenna. The proposed design is based on an original optimized bidirectional complimentary split ring resonator (CSRR) metamaterial multiband antenna and a modified hybrid junction ring rectifier with four rectifying branches. It harvests the ambient radiofrequency radiations at GSM, 1.8 GHz; UMTS, 2.1 GHz; WiFi, 2.45 GHz; and 4G‐2.6 GHz GSM bands. The created prototypes are printed on a 1.57‐mm‐thickness FR4 substrate and achieve the needed dimensional optimization in both antenna and rectifier. The CSRR antenna accomplished a maximum harvesting realized gain of 2.41, 2.26, 1.58, and 2.69 dB on the aforementioned frequency bands, respectively, 63.75% of antenna size reduction, and 23.62% rectifier size reduction regarding the conventional designs. The hybrid ring junction is used to independently match the subrectifiers at each frequency band. The realized rectenna has been accurately tested in both controlled and outdoor environments, achieving a 67.6% peak efficiency at 1.8 GHz frequency band for an input power level of 10 dBm. It powered up a digital batteryless watch in the outdoor experiment.     

Miniaturized Novel UWB Band-Notch Textile Antenna for Body Area Networks

This paper presents the design and analysis of a miniaturized and novel wearable ultra-wideband (UWB) band-notch textile antenna for Body Area Networks (BANs). The major goal of building the antenna for wearable applications with band notch in X-band is to reject the downlink band (7.25 to 7.75 GHz) of satellite communication in the UWB frequency ranges of 3.1–10.6 GHz to keep away from interference. Computer Simulation Technology (CST) TM Microwave Studio, which is user-friendly and reliable, was used to model and simulate the antenna. The radiating element of the antenna is designed on Jeans’ textile substrate, which has a relative permittivity of 1.7. The thickness of the jeans’ fabric substrate has been considered to be 1 mm. Return loss, gain, bandwidth, impedance, radiation, and total efficiency, and radiation patterns are presented and investigated. The antenna is simulated placed on the three layers of the human body model, and the on-body results are summarized in comparison with free space. Results and analysis indicate that this antenna has good band-notch characteristics in the frequency range of 7.25 GHz to 7.75 GHz. The parametric study varying the relative permittivity of Jeans’ fabric substrate of this antenna is also evaluated. In addition, effects on the antenna parameters of variation of ground plane size have been reported. The antenna is 25 mm × 16 mm × 1.07 mm in total volume. Results reveal that this antenna achieves the design goal and performs well both in free space and on the body.     

Miniaturized dual‐band slot antenna design for GPS,amateur radio and WLAN applications

In this article, miniaturization of dual‐band slot antenna design for GPS, WLAN and amateur radio applications is presented. The proposed dual‐band miniaturized antenna is achieved using slits, rectangular split ring and metallic strips fed by 50 Ω microstrip feed. The first resonant frequency is achieved by loading reference antenna with eight slits that is antenna 1 and the second resonant frequency is achieved by loading with one center slits and rectangular split ring that is antenna 2. Dual‐band antenna is achieved by loading reference slot antenna with nine slits and rectangular split ring which resonates at frequency of 1.52 and 3.03 GHz respectively. As a result, it is achieved 53.79% reduction in first band resonant frequency with 76.07% improvement in ?10 dB bandwidth and 7.90% reduction in second band resonant frequency compared to reference slot antenna. Further, this dual‐band antenna is miniaturized by metallic strips which are placed on the bottom of the substrate. This results in 61.39% reduction in first band resonant frequency with 32.07% improvement in ?10 dB bandwidth and 26.13% reduction in second band resonant frequency in comparison with reference slot antenna topology.     

A CPW‐fed UWB MIMO antenna with integrated GSM band and dual band notches

This article presents a coplanar waveguide fed global system for mobile communications band integrated ultra wide band (UWB) multiple input multiple output (MIMO) antenna with single and dual notch band characteristics. The novelty of the antenna lies in its design as all the unit cells of the proposed UWB MIMO antenna structure are orthogonal to each other therefore the additional isolation elements responsible for achieving high isolation are not required consequently making proposed antenna design simple and easy to fabricate. In this context, 2 MIMO systems have been designed. The first MIMO system is consisting of a dual port antenna whereas the second MIMO system is a printed quad port antenna; further single and dual notch band are achieved in the proposed multi‐port MIMO antenna. The antenna shows pattern diversity throughout the impedance bandwidth range. The gain of the antenna varies from 4 to 8.48 dBi. The 2 band notches are achieved at 4.8 and 7.7 GHz in the UWB range. The proposed antenna is fabricated and it is found measured results are in good agreement with simulated results.     

Broadband circularly polarized printed falcate‐shaped monopole antenna

In this study, a simple broadband circularly polarized (CP) printed monopole antenna for S/C‐band applications is proposed. The CP antenna is composed of a falcate‐shaped monopole with a right‐angle trapezoid stub, then wide impedance and axial ratio (AR) bandwidths are achieved. By placing one rectangular split‐ring resonator above the stub for generating upper CP mode, both of impedance and CP performances are further improved. The proposed antenna is fabricated on a FR4 substrate and measured. The measured ?10‐dB impedance bandwidth is 107%, ranging from 2.4‐7.9 GHz, and the measured 3‐dB AR bandwidth is 94% (2.4‐6.6 GHz), covering the entire wireless local area network (WLAN) and WiMAX bands.     

Compact dual‐band ring dielectric resonator antenna with moon‐shaped defected ground structure for WiMAX/WLAN applications

In this article, compact ring‐shaped dielectric resonator antenna (DRA) along with moon‐shaped defected ground structure (DGS) was studied. The proposed antenna was fed by microstrip line shifted from center position, which excited TE_01δ mode in ring DRA. Moon‐shaped DGS was acting as a radiator and also reduced the size of proposed antenna by an amount of 14.87% (lower frequency band) and 48.77% (upper frequency band). The proposed antenna was designed to resonate at two different frequencies namely 2.24 and 5.82 GHz with a fractional bandwidth of 30.17% and 22.14%, respectively. Based on optimized design parameters, archetype of antenna structure has been constructed and measured successfully, which shows good agreement with simulated ones. The proposed antenna design was suitable for WLAN (2.4/5.2/5.8 GHz); WiMAX (2.5/5.5 GHz); AMSAT (5.6/5.8 GHz); and WAVE (5.9 GHz) bands. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:503–511, 2016.     

Design of a compact triple band antenna with independent frequency tuning for MIMO applications

In this article, a planar, low profile microstrip line‐fed triple band multiple input multiple output (MIMO) antenna is presented for WiMax (2.5/3.5/5.5 GHz)/WLAN (2.4/3.6/5.8 GHz) applications simultaneously. The single element of the MIMO antenna consists of (i) a rectangular split ring resonator (SRR), (ii) a stepped impedance resonator (SIR) inside the SRR and (iii) a slot on the SIR. Each of the resonators generates its own individual band and each band is independently tunable. The antenna exhibits three operating bands at 2.35‐2.85 GHz, 3.25‐3.90 GHz and 5.45‐5.65 GHz. Four antenna elements are used to design the proposed MIMO antenna. The simulated results are observed and reported in terms of S‐parameters, gain, radiation patterns, envelope correlation coefficient (ECC), diversity gain (DG), channel capacity loss (CCL) and total active reflection coefficient. ECC and CCL are within the acceptable range defined for 4G and 5G application standards. To validate the simulation results a prototype structure is fabricated and the measured results are compared with those obtained from the simulation.     

Compact ultra‐wideband slot antenna with three notched‐band characteristics

A very compact ultra‐wideband (UWB) slot antenna with three L‐shaped slots for notched‐band characteristics is presented in this article. The antenna is designed and fabricated using a new stepped slot with different size, integrated in the ground plane, and excited by a 50 Ω microstrip transmission line. The stepped slot is used to minimize the dimensions of the antenna and to achieve an impedance bandwidth between 2.65 and 11.05 GHz with voltage standing wave ratio (VSWR) less than 2. The length of the stepped slot is equal to a quarter wavelength to create a resonance in the desired frequency. Three L‐shaped slots with various sizes are etched in the ground plane to reject three frequency bands in C‐band (3.7‐4.2 GHz), WLAN (5.15‐5.825 GHz), and X‐band (7.25‐7.75 GHz), respectively. The notched‐band frequency can be controlled by changing the length of the L‐shaped slot. The proposed antenna has a very small size (20.25 × 8 × 1.27 mm³) compared with previous works. The measured and simulated results show a good agreement in terms of radiation pattern and impedance matching.     

A vertex‐fed hexa‐band frequency reconfigurable antenna for wireless applications

Present article embodies the design and analysis of an octagonal shaped split ring resonator based multiband antenna fed at vertex for wireless applications with frequency‐band reconfigurable characteristics. The proposed antenna is printed on FR4 substrate with electrical dimension of 0.4884 λ × 0.4329 λ × 0.0178 λ (44 × 39 × 1.6 mm³), at lower frequency of 3.33 GHz. The antenna consists of SRR based vertex fed octagonal ring as the radiation element and switchable reclined L‐shaped slotted ground plane. Antenna achieves six bands for wireless standards viz: upper WLAN (5.0/5.8 GHz), lower WiMAX (3.3 GHz), super extended C‐band (6.6 GHz), middle X band (9.9 GHz—for space communication), and lower K_U band (15.9 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The proposed design achieves hexa band characteristics during switching ON state of PIN diode located at reclined L‐shaped slot in the ground plane. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

Dual‐band circularly polarized dielectric resonator antenna for wireless applications

This letter investigates an integrated antenna configuration for WLAN/WiMAX applications. The proposed composite antenna configuration is simply the grouping of ring dielectric resonator along with reformed square‐shaped slot antenna. Three significant characteristics of proposed article are: (1) aperture act as magnetic dipole and excite HE_11δ mode in ring dielectric resonator antenna; (2) reforming of square aperture generates orthogonal modes in ring DRA and creates CP in lower frequency band; (3) annular‐shaped Microstrip line along with reformed square aperture creates CP wave in upper frequency band. With the purpose of certifying the simulated outcomes, prototype of proposed structure is fabricated and tested. Good settlement is to be got between experimental and software generated outcome. Experimental outcomes show that the proposed radiating structure is operating over 2 frequency bands that is, 2.88‐3.72 and 5.4‐5.95 GHz. Measured 3‐dB axial ratio bandwidth in lower and upper frequency band is approximately 9.52% (3.0‐3.4 GHz) and 5.85% (5.64‐5.98 GHz), respectively. These outcomes indicate that the proposed composite antenna structure is appropriate for WLAN and WiMAX applications.