Physiography of the Exmouth and Scott Plateaus,Western Australia,and adjacent northeast Wharton Basin

The continental margin of Western Australia is a rifted or “Atlantic”-type margin, with a complex physiography. The margin comprises a shelf, an upper and lower continental slope, marginal plateaus, a continental rise, and rise or lower slope foothills. Notches or terraces on the shelf reflect pre-Holocene deposition of prograded sediment, whose seaward limit was determined by variations in relative sea level, wave energy, and sediment size and volume. The upper continental slope has four physiographic forms: convex, due to sediment outbuilding (progradation) over a subsiding marginal plateau; scarped, due to erosion of convex slopes; stepped, due to deposition at the base of a scarped slope; and smooth, due to progradation of an upper slope in the absence of a marginal plateau. Lying at the same level as the upper/lower slope boundary are two extensive marginal plateaus: Exmouth and Scott. They represent continental crust which subsided after continental rupture by sea-floor spreading. Differential subsidence, probably along faults, gave rise to the various physiographic features of the plateaus. The deep lower continental slope is broken into straight northeasterly-trending segments, that parallel the Upper Jurassic/Lower Cretaceous rift axis, and northwesterly-trending segments that parallel the transform direction. The trends of the slope foothills are subparallel to the rift direction. The four abyssal plains of the region (Perth, Cuvier, Gascoyne and Argo) indicate a long history of subsidence and sedimentation on Upper Jurassic/Lower Cretaceous oceanic crust.     

On the formation of laminated sediments on the continental margin off Pakistan: the effects of sediment provenance and sediment redistribution

The sedimentary processes and sediment sources contributing to the formation of laminated sediments along the upper slope off Pakistan are unravelled using inorganic bulk sediment geochemistry of 43 surface cores from the Pakistani continental margin and additional geochemical and Pb and Nd-isotope data for different types of layers. An important process everywhere along the margin is redeposition of fluvial-derived detritus from the shelf onto the slope. This process is of considerably higher intensity along the Makran margin than on the Indus margin. Trace element enrichment related to early diagenesis or surface productivity, which is commonly detectable in bulk sediment composition, is swamped by the high clastic supply in the Makran region, but may be observed in the Indus region.Four types of layers are found in the laminated sediment cores from the upper slope. They reflect different mechanisms of deposition and different sediment sources. An alternating pattern of olive-grey and black layers results from downslope redeposition of fluvial material over most of the year, to which organic matter from sea surface production is added during the late summer monsoon season. Distinctive white to grey coloured layers along the Makran slope originate from large scale expulsion of sediments from the Makran accretionary wedge through mud volcanoes on the shelf, subsequent erosion by waves, and downslope redeposition. These layers may dominate the sedimentary record within the Makran accretionary wedge, but are absent on the Indus margin. Occasional red coloured turbidites, which probably represent larger floods on the Indus plain, contribute to this mixture of varying sedimentary processes and sediment sources along the Pakistani continental slope.     

Geotechnical properties of sediment on the Kodiak continental shelf and upper slope,gulf of Alaska

Abstract

Fine‐grained sedimentary deposits on the Kodiak continental shelf and upper slope comprise three distinct compositional types: terrigenous mud, diatomrich mud, and ash‐rich sandy mud. The sediment types can be distinguished on the basis of geotechnical properties as well as by composition. The terrigenous mud has properties largely within the normal range for fine‐grained marine sediment, except for the low compressibility of many samples. This sediment underlies the walls of canyons that incise the upper slope, and analyses of undrained static and cyclic loading indicate potential instability in the steepest areas. The diatom‐rich mud has high water content, plasticity index, and compression index but low grain specific gravity. The ash‐rich sandy mud is nonplastic and has low water content and compressibility. It has high drained and undrained static strength but is extremely weakened by cyclic loading. Extensive deposits of sedimentary bedrock and coarsegrained glacial sediment in the region apparently are relatively stable, but low sediment strength or high compressibility may be encountered at the local sites of soft sedimentary deposits.     

Carbonate slope morphology revealing sediment transfer from bank-to-slope (Little Bahama Bank,Bahamas)

New high-quality multibeam and high-resolution seismic data reveal new observations on sediment transfer and distribution and margin morphometrics in the uppermost slope of Northeastern Little Bahama Bank between 20 and 300 m water depth. The echofacies/backscatter facies show an alongslope sediment distribution forming successive strips. The upper part of the uppermost slope corresponds to the alternation of several submerged coral terraces and escarpments that could be related to Late Quaternary sea-level variations. The terraces could either be related to periods of stagnating sea-level or slow-down in sea-level change and therefore increased erosion by waves, or periods of accelerated sea-level rise since the Last Glacial Maximum. Terraces could therefore be related to coral construction and drowing. The medium part corresponds to the marginal escarpment, a steep cemented area. The lower part of the uppermost slope shows a discontinuous Holocene sediment wedge with varying thickness between 0 and 35 m. It is separated from the upper part by a zone of well-cemented seafloor associated with the marginal escarpment. Passing cold fronts result in sediment export caused by density cascading. The associated sediment fall-out and convective sedimentation can generate density currents that form this wedge and eventually flow through linear structures on the upper slope. The survey reveals the presence of recently active channels that extend over the entire uppermost slope and interrupt the wedge. The channels connect shallow tidal channels to submarine valleys connected to the proximal part of canyons. They directly feed the canyons with platform-derived sediment forming low-density turbidity currents and could supply the deepest part of the system with coarse-grained sediment directly exported from the carbonate platform.     

Controls on the development of valleys,canyons, and unconfined channel–levee complexes on the Pleistocene Slope of East Kalimantan,Indonesia

Shallow 3D seismic data show contrasting depositional patterns in Pleistocene deepwater slopes of offshore East Kalimantan, Indonesia. The northern East Kalimantan slope is dominated by valleys and canyons, while the central slope is dominated by unconfined channel–levee complexes. The Mahakam delta is immediately landward of the central slope and provided large amounts of sediments to the central slope during Pleistocene lowstands of sea level. In the central area, the upper slope contains relatively straight and deep channels. Sinuous channel–levee complexes occur on the middle and lower slope, where channels migrated laterally, then aggraded and avulsed. Younger channel–levee complexes avoided bathymetric highs created by previous channel–levee complexes. Levees decrease in thickness down slope. Relief between channels and levees also decreases down slope.North of the Mahakam delta, siliciclastic sediment supply was limited during the Pleistocene, and the slope is dominated by valleys and canyons. Late Pleistocene rivers and deltas were generally not present on the northern outer shelf. Only one lowstand delta was present on the northern shelf margin during the upper Pleistocene, and sediments from that lowstand delta filled a pre-existing slope valley complex and formed a basin-floor fan. Except for that basin-floor fan, the northern basin floor shows no evidence of sand-rich channels or fans, but contains broad areas with chaotic reflectors interpreted as mass transport complexes. This suggests that slope valleys and canyons formed by slope failures, not by erosion associated with turbidite sands from rivers or deltas. In summary, amount of sediment coming onto the slope determines slope morphology. Large, relatively steady input of sediment from the Pleistocene paleo-Mahakam delta apparently prevented large valleys and canyons from developing on the central slope. In contrast, deep valleys and canyons developed on the northern slope that was relatively “starved” for siliciclastic sediment.     

Neogene-Quaternary contourite and related deposition on the West Shetland Slope and Faeroe-Shetland Channel revealed by high-resolution seismic studies

The Neogene and Quaternary sediments of the Faeroe-Shetland Channel and West Shetland shelf and slope rest upon a major regional unconformity, the Latest Oligocene Unconformity (LOU), and have been deposited through the interaction of downslope and parallel-to-slope depositional processes. The upper to middle continental slope is dominated by mass-transport deposits (debris flows), which progressively diminish downslope, and were largely generated and deposited during glacial cycles when ice sheets supplied large quantities of terrigeneous sediment to the upper slope and icebergs scoured sea-floor sediments on the outer shelf and uppermost slope. Large-scale sediment failures have also occurred on the upper slope and resulted in deposition of thick, regionally extensive mass-transport deposits on portions of the lower slope and channel floor. In contrast, large fields of migrating sediment waves and drift deposits dominate most of the middle to lower slope below 700 m water depth and represent deposition by strong contour currents of the various water masses moving northeastward and southwestward through the channel. These migrating sediment waves indicate strong northeastward current flow at water depths shallower than 700 m and strong southwestward current flow at water depths from 700 to >1,400 m. These flow directions are consistent with present-day water-mass flow through the Faeroe-Shetland Channel. The Faeroe-Shetland Channel floor is underlain by thin conformable sediments that appear to be predominantly glacial marine and hemipelagic with less common turbidites and debris flows. No evidence is observed in seismic or core data that indicates strong contour-current erosion or redistribution of sediments along the channel floor.     

Structure and morphology of the west Reykjanes basin and the southeast Greenland continental margin

The continental-shelf morphology is dominated by glacial erosion and deposition. Erosion is prominent on the near-shore shelf and deposition along the outer shelf edge. The continental slope is characterized by delta-shaped progradations (glaciomarine-sediment fans) seaward of the shelf channels. Canyons cross the continental slope only in the region southeast of Cape Farewell. The continental rise is incised by a number of submarine canyons. Broad sediment ridges on the upper continental rise are probably canyon-eroded remains of extensive Plio-Pleistocene fans. A mid-ocean channel which crosses the continental rise is possibly related to the axis of maximum depth of Denmark Strait. Despite the presence of strong bottom currents, there is no indication of depositional sediment drifts along the continental margin of Greenland between Cape Farewell and Denmark Strait. This may be a function of high current velocity or low sediment load.Sea floor older than 60 m.y. B.P. is present just seaward of the Greenland continental margin implying either downwarped continental material or an early rift formed prior to the separation of Greenland from the European plate. A left lateral offset of anomalies 20 and 21 at 65°N indicates a major fracture zone related to the Greenland continental margin offset nearby.     

Turbidity of waters over the Northwest Iberian continental margin

In OMEX-II-II, 9 cruises gathered optical data, principally by transmissometer. The distribution of optical turbidity caused by concentration of particulate matter (PMC) in the water column over the northern Iberian margin shows several features related to hydrography. It is concluded that a signal of PMC seen in Mediterranean Water (MW) found north of 42°N is not carried from its source at the Gibraltar Sill and Gulf of Cadiz because it is shown, using intermediate stations, that this turbid plume decays, mainly by fall out but also partly by mixing, to very low levels around southern Portugal. PMC maxima sometimes seen in MW on the northern Iberian margin are thus most likely to result from intermittent local resuspension by MW interacting with slope sediments. The highest turbidity is found over the upper slope and is the result of (i) shelf edge resuspension and off-shelf flow of turbid plumes, mainly between 100 and 300 m depth, and (ii) resuspension under the slope current aided by internal waves, in the depth range 500–800 m where the density gradient between ENACW and MW is maximal. Below the MW, flows are generally slow, and turbidity is low. The bottom nepheloid layer in deep water is also weak with PMC values <100 mg m-3. The focus of resuspension activity on the upper slope means that the region is an efficient exporter to the ocean of sediment that either escapes from the shelf or sinks to the bed from surface production. This accounts for upper slope sediments recorded in other studies as sandy or in places as rocky bottom.     

Bottom processes, morphology, and geotechnical properties of the continental slope south of Baltimore Canyon

The continental slope south of Baltimore Canyon seaward of the coasts of Delaware and Maryland has a different morphology and sedimentary structure than adjacent portions of the continental margin. Ridges of sediment 600 m thick and transverse to the slope contain many unconformities that can be traced from ridge to ridge. The age of the sediment is inferred to be late tertiary to recent with the morphology related to a major drainage system. Physical properties of a suite of sediment cores display a pattern that varies in relationship to the morphology and depositional environment. Sedimentary structures and low shear strengths indicate instability of surficial sediments present on the upper slope and can be correlated with regions where the seismic reflection profiles show slumping has occurred. A veneer of sand overlying the general silty clay of the area is present on the upper slope and on the ridges indicating sand spillover from the shelf with a recent change in deposition pattern.     

Input of Glaciomarine Sediments along the East Antarctic Continental Margin; Depositional Processes on the Cosmonaut Sea Continental Slope and Rise and a Regional Acoustic Stratigraphic Correlation from 40° W to 80° E

Multichannel seismic reflection data from the Cosmonaut Sea margin of East Antarctica have been interpreted in terms of depositional processes in the continental slope and rise area. A major sediment lens is present below the upper continental rise along the entire Cosmonaut Sea margin. The lens probably consists of sediments supplied from the shelf and slope, being constantly reworked by westward flowing bottom currents, which redeposited the sediments into a large scale drift deposit prior to the main glaciogenic input along the margin. High-relief semicircular or elongated depositional structures are also found on the upper continental rise stratigraphically above the regional sediment lens, and were deposited by the combined influence of downslope and alongslope sediment transport. On the lower continental rise, large-scale sediment bodies extend perpendicular to the continental margin and were deposited as a result of downslope turbidity transport and westward flowing bottom currents after initiation of glacigenic input to the slope and rise. We compare the seismostratigraphic signatures along the continental margin segments of the adjacent Riiser Larsen Sea, the Weddell Sea and the Prydz Bay/Cooperation Sea, focussing on indications that may be interpreted as a preglacial-glaciomarine transition in the depositional environment. We suggest that earliest glaciogenic input to the continental slope and rise occurred in the Prydz Bay and possibly in the Weddell Sea. At a later stage, an intensification of the oceanic circulation pattern occurred, resulting in the deposition of the regional plastered drift deposit along the Cosmonaut Sea margin, as well as the initiation of large drift deposits in the Cooperation Sea. At an even later stage, possibly in the middle Miocene, glacial advances across the continental shelf were initiated along the Cosmonaut Sea and the Riiser Larsen Sea continental margins.     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Sediment transport in Washington and Norfolk submarine canyons

A sediment study suggests that Washington and Norfolk canyons off the Mid-Atlantic States are not inactive, but have served periodically since the Late Pleistocene as conduits of sediment originating on the adjacent shelf and upper slope. Large quantities of sand occur in the canyon heads as thin beds and laminae, and on the continental slope as mixtures of sand (to $\text{>40\%}$), silt and clay that are extensively reworked by burrowing organisms. Sandy turbidites occur in the canyons on the rise. Basinward dispersal, from the outer shelf and uppermost slope, is recorded by heavy mineral suites and bioclastic components, primarily foraminifera of shallow marine origin, in the lower slope and upper continental rise canyon cores. The down-axis movement of material, presumably episodic, in the Holocene to recent results from offshelf spillover into canyon heads, failure on the steep walls bordering canyons on the slope, and resuspension by bottom currents.     

Submarine faults and slides on the continental shelf,northern Gulf of Alaska

Abstract

Submarine faults and slides or slumps of Quaternary age are potential environmental hazards on the outer continental shelf (OCS) of the northern Gulf of Alaska. Most faults that approach or reach the seafloor cut strata that may be equivalent in age to the upper Yakataga Formation (Pliocene‐Pleistocene). Along several faults, the seafloor is vertically offset from 5 to 20 m. A few faults appear to cut Holocene sediments, but none of these shows displacement at the seafloor. Submarine slides or slumps have been found in two places in the OCS region: (1) seaward of the Malaspina Glacier and Icy Bay, an area of 1200 km² with a slope of less than 0.5°, and (2) across the entire span of the Copper river prodelta, an area of 1730 km², having a slope of about 0.5°. Seismic profiles across these areas show disrupted reflectors and irregular topography commonly associated with submarine slides or slumps. Potential slide or slump areas have been delineated in areas of thick sediment accumulation and relatively steep slopes. These areas include (1) Kayak Trough, (2) parts of Hinchinbrook Entrance and Sea Valley, (3) parts of the outer shelf and upper slope between Kayak Island and Yakutat Bay, and (4) Bering Trough.     

Sedimentological processes in the southern margin of the Cretan Sea (NE Mediterranean)

The Cretan Basin can be characterized as a back-arc basin of the Hellenic Trench System, that is related to the subduction zone of the African Plate under the Eurasia Plate. The study area includes the narrow and relatively steep (gradient 1.5°) continental shelf of the island of Crete followed by the steep slope (2°–4°) and the rather flat deeper part of the Cretan basin (water depths >1700 m).Surficial sediments of the coastal zone are coarser and of terrigenous origin, while in deeper waters finer sediments, of biogenic origin, are more abundant. Sand-sized calcareous sediment accumulations, identified in middle-lower slope, may be attributed to the aggregation of seabed biogenic material related to the near bed current activity.High resolution profiles (3.5 kHz) taken from the inner shelf shows a typical sigmoid-oblique progradational configuration, implying prodelta sediment accumulation during the Holocene. In the upper-middle slope, sub-bottom reflectors indicate continuous sedimentation of alternating fine and/or coarse grained material. Small-scale gravity induced synsedimentary faults appeared, locally. In contrast, a series of gravity induced faults, identified in the lower slope, are associated with sediment instabilities due to seismotectonic activity. Sediment cores taken from the shelf-break consists of calcareous muddy sand with small amounts of terrigenous silt and fine sand, while the cores recovered from the middle slope has revealed a more homogeneous fine sediment texture of hemipelagic deposition.The prevailing accumulation processes in the southern margin of the Cretan basin are: (i) prodelta deposition in the inner-middle shelf; (ii) settling from bottom nepheloid layers in the shelf and upper slope; (iii) calcareous sediment formation due to settling from suspension and post accumulation aggregation (middle-lower slope); (iv) long-term episodic sediment gravity processes in the lower slope; and (v) to a lesser extent, redeposition from resuspension due to gravity processes and bottom currents.     

Confirmation of beach accretion by grain-size trend analysis: Camposoto beach, Cádiz, SW Spain

An application of the grain size trend analysis (GSTA) is used in an exploratory approach to characterize sediment transport on Camposoto beach (Cádiz, SW Spain). In May 2009 the mesotidal beach showed a well-developed swash bar on the upper foreshore, which was associated with fair-weather conditions prevailing just before and during the field survey. The results were tested by means of an autocorrelation statistical test (index I of Moran). Two sedimentological trends were recognized, i.e. development towards finer, better sorted and more negatively skewed sediment (FB–), and towards finer, better sorted and less negatively or more positively skewed sediment (FB+). Both vector fields were compared with results obtained from more classical approaches (sand tracers, microtopography and current measurements). This revealed that both trends can be considered as realistic, the FB+ trend being identified for the first time in a beach environment. The data demonstrate that, on the well-developed swash bar, sediment transported onshore becomes both finer and better sorted towards the coast. On the lower foreshore, which exhibits a steeper slope produced by breaking waves, the higher-energy processes winnow out finer particles and thereby produce negatively skewed grain-size distributions. The upper foreshore, which has a flatter and smoother slope, is controlled by lower-energy swash-backwash and overwash processes. As a result, the skewness of the grain-size distributions evolves towards less negative or more positive values. The skewness parameter appears to be distributed as a function of the beach slope and, thus, reflects variations in hydrodynamic energy. This has novel implications for coastal management.

Response of Cenozoic turbidite system to tectonic activity and sea-level change off the Zambezi Delta

Submarine fans and turbidite systems are important and sensitive features located offshore from river deltas that archive tectonic events, regional climate, sea level variations and erosional process. Very little is known about the sedimentary structure of the 1800 km long and 400 km wide Mozambique Fan, which is fed by the Zambezi and spreads out into the Mozambique Channel. New multichannel seismic profiles in the Mozambique Basin reveal multiple feeder systems of the upper fan that have been active concurrently or consecutively since Late Cretaceous. We identify two buried, ancient turbidite systems off Mozambique in addition to the previously known Zambezi-Channel system and another hypothesized active system. The oldest part of the upper fan, located north of the present-day mouth of the Zambezi, was active from Late Cretaceous to Eocene times. Regional uplift caused an increased sediment flux that continued until Eocene times, allowing the fan to migrate southwards under the influence of bottom currents. Following the mid-Oligocene marine regression, the Beira High Channel-levee complex fed the Mozambique Fan from the southwest until Miocene times, reworking sediments from the shelf and continental slope into the distal abyssal fan. Since the Miocene, sediments have bypassed the shelf and upper fan region through the Zambezi Valley system directly into the Zambezi Channel. The morphology of the turbidite system off Mozambique is strongly linked to onshore tectonic events and the variations in sea level and sediment flux.     

南海北部陆坡峡谷区海底沉积物工程地质特征及区域稳定性评价

The upper part of the continental slope in the northern South China Sea is prone to submarine landslide disasters,especially in submarine canyons. This work studies borehole sediments, discusses geotechnical properties of sediments, and evaluates sediment stability in the study area. The results show that sediment shear strength increases with increasing depth, with good linear correlation. Variations in shear strength of sediments with burial depth have a significantly greater rate of change in the canyon head and middle part than those in the canyon bottom. For sediments at the same burial depth, shear strength gradually increased and then decreased from the head to the bottom of the canyon, and has no obvious correlation with the slope angle of the sampling site. Under static conditions, the critical equilibrium slope angle of the sediments in the middle part of the canyon is 10° to 12°, and the critical slope angle in the head and the bottom of the canyon is 7°. The results indicate that potential landslide hazard areas are mainly distributed in distinct spots or narrow strips on the canyon walls where there are high slope angles.