Removal of methylene blue from aqueous solutions by poly(2-acrylamido-2-methylpropane sulfonic acid-co-itaconic acid) hydrogels

In this study, removal of methylene blue (MB) from aqueous solution by poly(AMPS-co-IA) hydrogels was examined by batch equilibration technique. The effects of monomer ratio, concentration of initiator and crosslinker, pH, adsorption time, initial dye concentration and adsorption temperature on the removal of MB were studied. The results show that the removal of MB was highly effected by preparation conditions of hydrogel. The maximum removal was observed at 10/90 IA/AMPS monomer ratio, 1.0% KPS, and 10.0% MBAAm concentrations. Removal of MB was strongly affected by pH. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were applied. It was concluded that adsorption of MB on hydrogel followed pseudo-second-order kinetics. It was found that the adsorption isotherm of the MB fit Langmuir-type isotherms. From the Langmuir equation, the adsorption capacity was found as 1,000 mg/g for MB dye. Thermodynamic parameters suggest that the adsorption is a typical physical process, spontaneous, and exothermic in nature. Ten adsorption—desorption cycles demonstrated that the hydrogels were suitable for repeated use without considerable change in adsorption capacity. The results revealed that this hydrogels have potential to be used as an adsorbent for the removal of MB from aqueous solution.     

Functionalization of polyvinyl alcohol hydrogels with graphene oxide for potential dye removal

Because of highly frozen macromolecule chains, polyvinyl alcohol (PVA) hydrogels have never been used for dye removal. This work focuses on improving the adsorption capacity of the PVA hydrogel by using amphiphilic graphene oxide to improve its macromolecular chain mobility in crystal domain and introduce new functional groups. To evaluate its effectiveness, crystal structure, swelling kinetics, and model dye methylene blue (MB) adsorption of the as‐prepared PVA hybrid hydrogels were systematically investigated. The results indicate that the hybrid PVA hydrogels have lower crystallinity and less crystal stability, demonstrating the improved macromolecular chain mobility. Moreover, improved swelling ratios of PVA/GO hydrogels also illustrate the enhanced macromolecular chain mobility. MB adsorption experiment indicates that GO introduced can result in great improvement in MB adsorption. And the adsorption process follows the second‐order kinetic model and Morris–Weber model, which is determined by the intraparticle diffusion. Furthermore, MB adsorption isotherm follows Freundlich model and the adsorption is heterogeneous. Desorption studies indicate that the interaction between PVA hydrogels and MB consists of both physisorption and chemisorption. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39872.     

Radiation synthesis of graphene oxide/composite hydrogels and their ability for potential dye adsorption from wastewater

A high yield of graphene oxide (GO) was chemically synthesized from graphite powder utilizing adjusted Hummer's method. The contents of acidic functional groups in GO were determined using potentiometric titration. Composite hydrogels dependent on graphene oxide/poly(2-acrylamido-2-methylpropanesulfonic acid)/polyvinyl alcohol (GO/PAMPS/PVA) were synthesized utilizing a ⁶⁰Co gamma irradiation source at different doses. The synthesized graphene oxide and composite hydrogels were portrayed via X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared analysis. The morphology of composite hydrogels was characterized by scanning electron microscope. The gel % and swelling % for the prepared hydrogel demonstrated that the swelling % of hydrogel increased with raising AMPS content. Whereas the increment of GO and increasing the irradiation dose lead to a reduction in the swelling %. The influences of pH, GO percentage, initial dye concentration, the adsorbent dosage, contact time, and temperature on the adsorption of basic blue 3 dye were evaluated and the adsorption capacity was 194.6 mg/g at optimum conditions; pH = 6, GO/PAMPS/PVA composite hydrogels with 5 wt% of GO, initial dye concentration = 200 mg/L, adsorbent dose = 0.1 g, solution volume = 50 mL after 360 min at room temperature (25°C). The adsorption of dye onto the GO/PAMPS/PVA composite hydrogels follows Pseudo-second-order adsorption kinetics, fits the Freundlich adsorption isotherm model.     

Gellan gum‐based novel composite hydrogel: Evaluation as adsorbent for cationic dyes

A semi‐interpenetrating network system [(GG‐g‐PAAm)‐PVA] was made by microwave irradiation of aqueous mixture of gellan gum (GG), acrylamide (AAm), and poly(vinyl alcohol) (PVA) containing N,N′‐methylene‐bis‐acrylamide as crosslinking agent. The gel was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, and scanning electron microscopy techniques. The swelling behavior was studied under different pH conditions. A pH‐dependent swelling with maximum swelling under neutral pH was observed. The swelling process is found to follow second‐order kinetics and the mechanism of water transport is found to be Fickian type of diffusion. The (GG‐g‐PAAm)‐PVA was evaluated for removal of dye from aqueous solution, using crystal violet, a cationic dye. The maximum adsorption capacity of the gel was found to be 45.45 mg/g. The kinetic studies revealed a second‐order adsorption process which fits well into Langmuir model. The evaluation of thermodynamic parameters indicated the adsorption process to be exothermic and spontaneous at lower temperatures. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45527.     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Nonporous monosize polymeric sorbents: Dye and metal chelate affinity separation of lysozyme

Lysozyme adsorption onto dye‐attached nonporous monosize poly(2‐hydroxyethyl‐methacrylate‐methylmethacrylate) [poly(HEMA‐MMA)] microspheres was investigated. Poly(HEMA‐MMA) microspheres were prepared by dispersion polymerization. The monochloro‐triazine dye, Cibacron Blue F3GA, was immobilized covalently as dye–ligand. These dye‐affinity microspheres were used in the lysozyme adsorption–desorption studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached and metal‐chelated microspheres were studied in a batch reactor. Effect of Cu(II) chelation on lysozyme adsorption was also studied. The nonspecific adsorption of lysozyme on the poly(HEMA‐MMA) microspheres was 3.6 mg/g. Cibacron Blue F3GA attachment significantly increased the lysozyme adsorption up to 247.8 mg/g. Lysozyme adsorption capacity of the Cu(II) incorporated microspheres (318.9 mg/g) was greater than that of the Cibacron Blue F3GA‐attached microspheres. Significant amount of the adsorbed lysozyme (up to 97%) was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. In order to examine the effects of separation conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We conclude that dye‐ and metal‐chelate affinity chromatography with poly(HEMA‐MMA) microspheres can be applied for lysozyme separation without causing any significant changes and denaturation. Repeated adsorption/desorption processes showed that these novel dye‐attached monosize microspheres are suitable for lysozyme adsorption. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 115–124, 2000     

Adsorption characteristics of methylene blue onto the N-succinyl-chitosan-<Emphasis Type="Italic">g</Emphasis>-polyacrylamide/attapulgite composite

N-succinyl-chitosan-g-polyacrylamide/attapulgite (NSC-g-PAM/APT) composite was applied as adsorbent for the removal of methylene blue (MB) from aqueous solution. The initial pH value of the dye solutions, the contact temperature, the contact time and the concentration of the dye solutions on adsorption capacity of the composite for MB dye were investigated. The adsorption kinetics and isotherms were also studied. It was shown that all the sorption processes were better fitted by pseudo-second-order equation and the Langmuir equation. The results indicated that the adsorption capacity of the composite was higher than those of chitosan (CTS) and attapulgite (APT). The desorption studies revealed that the composite provided the potential for regeneration and reuse after MB dye adsorption, which implied that the composite could be used as quite effective adsorbent for the removal of MB from aqueous solution.     

Removal of cationic dye from aqueous solution by adsorption onto crosslinked poly(4-vinylpyridine/crotonic acid) and its N-oxide derivative

In this study, crosslinked poly(4-vinylpyridine/crotonic acid) [poly(4-VPy/CrA)] and its N-oxide derivative were synthesized to compare the adsorption of cationic methylene blue (MB) dye on these materials. The adsorptive removal of MB from aqueous solution onto adsorbents was studied by using column adsorption method. Experimental results showed that MB was removed more effective by poly(4-VPy/CrA)–N-oxide than poly(4-VPy/CrA) resins. The percentage removal of MB increased with pH, and it was observed that basic pH was favorable for the adsorption of MB. The adsorption capacity for poly(4-VPy/CrA)–N-oxide resin was found to 19.96 mg/g. It was found that the adsorption isotherm of the MB-fitted Langmuir-type isotherm. For the adsorption of MB, the pseudo-second-order chemical reaction kinetics provides the best correlation with the experimental data. Ten adsorption–desorption cycles demonstrated that the resins were suitable for repeated use without considerable change in adsorption capacity.     

Preparation of Sodium carboxymethylcellulose/poly(methyl acrylate) IPN hydrogels and their application for adsorption

Sodium carboxymethylcellulose/poly(methyl acrylate) (NaCMC/PMA) interpenetrating polymer networks (IPNs) were prepared by fractional step in 40 wt % ethanol solution with N,N′‐methylenebisacrylamide as a crosslinker. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimeter were used to characterize the NaCMC/PMA IPN hydrogels and confirm the IPN structure as well. Simultaneously, adsorption of the obtained IPN hydrogels to methylene blue (MB) was also investigated. It was observed that the adsorption of MB onto the hydrogels was mainly dependent on the initial concentration of MB and the pH of the solution. Adsorption rate of MB was much higher in the first 9 h than that in the following period and saturated adsorption amount of MB was 2370 mg/g at the initial MB concentration of 100 mg/L. Moreover, the adsorption capacity of the IPN hydrogels at the neutral pH condition is much higher than those at acid or alkaline pH conditions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41101.     

Effects of crosslinking degree of poly(vinyl alcohol) hydrogel in aqueous solution: kinetics and mechanism of copper(II) adsorption

Recently, a renewed interest in hydrogels for heavy metal removal of wastewater has been growing because of embarking opportunities in industrial applications. One of the most interesting hydrogels potentially used as absorbent is poly(vinyl alcohol) (PVA), owing to its biocompatibility. In this study, the adsorption capacity of copper(II) ion onto PVA hydrogel (PVAH) adsorbents with different crosslinking degrees of 1, 3 and 5 % from aqueous solution was investigated. The PVAH adsorbents were prepared from PVA, using glutaraldehyde as a crosslinking agent. Their properties were determined by Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), and water absorption measurement. The results showed that PVA was crosslinked with glutaraldehyde. It exhibited an equilibrium swelling ratio in the range of 195–250 %, depending on the crosslinking degree with different PVAH structures defined from SEM micrographs. The adsorption capacity of copper(II) ion onto PVAH adsorbents was investigated and found that higher crosslinking degree decreased the absorption capacity. This behavior is due to the decrease in reactive sites, resulting in the decrease of interaction between copper(II) ion and PVA. Besides, the adsorption capacity also depended on contact time, pH and temperature. The adsorption process followed pseudo-second-order kinetic, having a 0.99 correlation coefficient. Intraparticle diffusion was confirmed by the adsorption mechanism controlled by particle and film diffusions.     

Adsorption of methylene blue onto powdered activated carbon immobilized in a carboxymethyl sago pulp hydrogel

The potential of crosslinked carboxymethyl sago pulp (CMSP) beads immobilized with powdered activated carbon (PAC) as an adsorbent for methylene blue (MB) adsorption was investigated. The finely powdered PAC had an excellent adsorption capacity for MB but was disadvantageous for the separation process from treated effluents. To ease the separation process, the CMSP medium could be advantageous for the process by acting an immobilizing medium for PAC. The MB adsorption reached equilibrium at the 14th hour, and further adsorption was studied to determine the effects of the CMSP concentration, PAC dosage, and pH. Different CMSP concentrations in the preparation of CMSP–PAC beads showed no significant differences; this proved that CMSP–PAC adsorbed more MB than CMSP did. The MB adsorption increased with increasing PAC concentration, whereas the CMSP–PAC beads disintegrated at pH 11.5. In the equilibrium study, the Langmuir isotherm fit well into the experimental data with a linear correlation coefficient (R ²) of 0.9837 and a maximum adsorption capacity of 250 mg/g. The kinetic study showed that pseudo‐second‐order kinetics accommodated the experimental data well with an R ² value of 0.9512 and a pseudo‐second‐order rate constant value of 3.61 × 10^?3 min^?1. The crosslinked CMSP–PAC beads have the potential to remove MB dye, and this could be exploited as an alternative to treating colored dye effluents produced by industries such as the textile, printing, and cosmetics industries. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44271.     

聚丙烯酸/氧化石墨烯复合水凝胶制备及对亚甲基蓝吸附

以丙烯酸(AA)为原料,二丙烯酸酯(Pul DA)分散的氧化石墨烯(GO)纳米胶粒(GO-Pul DA)为增强剂,N,N'-亚甲基双丙烯酰胺(BIS)为交联剂,通过自由基共聚合制备了一系列结构均一的聚丙烯酸/氧化石墨烯复合水凝胶(PAA/GO-Pul DA)。考察了BIS质量浓度、GO质量浓度以及溶液pH值对复合水凝胶力学性能、吸水性和亚甲基蓝(MB)吸附量的影响。结果表明,当GO质量浓度从0.1 g/L增加至1.0 g/L时,复合水凝胶拉伸强度从5.0 k Pa增加至10.4 k Pa,断裂伸长率高于100%,当GO的质量浓度为0.3 g/L时,复合水凝胶的断裂伸长率最高为151%;复合水凝胶表现出pH敏感的高吸湿性,pH从3.0增加至6.8时,平衡溶胀比(SRe)变化可达386 g/g,pH=6.8时最大SRe高达490 g/g。当溶液pH值从3.0增加至11.0时,PAA/GO-Pul D对MB的平衡吸附量(qe)可增加1 400~1 500 mg/g,pH=11.0时最大的qe高达1 789 mg/g。复合水凝胶对MB的吸附行为符合准一级动力学模型。5次吸附-解吸附循环后,相对于首次吸附,PAA/GO-Pul D对MB的吸附能力仍保持高达60%,解吸附效率高于90%。     

Graphene oxide/poly(vinyl alcohol) hydrogels with good tensile properties and reusable adsorption properties

Graphene oxide (GO)/poly(vinyl alcohol) (PVA) hydrogel (PGOH), which possesses good tensile and reusable absorption properties, has been prepared by the freezing–thawing method. The presence of GO visibly decreases the swelling ratio of PGOH and significantly enhances the tensile properties of PGOH due to the formation of hydrogen bonds between the GO and PVA. The maximum tensile strength and the equilibrium adsorption capacity of methylene blue (MB) of PGOH with 0.5?wt-% GO (PGOH-0.5) is found to be 15, being 4.1 times higher than that of pure PVA hydrogel. The spontaneous adsorption obeys the intraparticle diffusion kinetic model. In addition, PGOH-0.5 exhibits a promising cycling absorption performance. The 1st and 5th cycle of dye removal for PGOH-0.5 reached to 92 and 70%, respectively. Such enhancement in adsorption can be attributed to π–π stacking and strong electrostatic attraction between GO and MB.     

Swelling Characterization of Polyelectrolyte Poly(Hydroxamic Acid) Hydrogels in Aqueous Thiazin Dye Solutions

In this study, swelling behavior of polyelectrolyte poly(hydroxamic acid) (PHA) hydrogels have been investigated in aqueous thiazin dye solutions. PHA hydrogels were prepared by free radical polymerizations of acrylamide with some cross-linkers such as N,N′ methylenebisacrylamide (NBisA) and ethylene glycol dimethacrylate (EGDMA); then they were used in experiments on swelling and diffusion of some water-soluble cationic dyes such as methylene blue (MB), thionin (T), and toluidin blue (TB). Swelling experiments were performed in water at 25°C, gravimetrically. The equilibrium swelling percent (S%) values of PHA hydrogels were calculated as 238–2705%. Some swelling kinetic parameters such as initial swelling rate, swelling rate constant, and maximum (theoretical) swelling percent were found. Diffusional behavior of dye solutions was investigated. Dye diffusion into hydrogels was found to be non-Fickian in character. Diffusion exponent (n) is over 0.50. For sorption of thiazin cationic dyes, MB, T, and TB to PHA hydrogels were studied by batch sorption technique at 25°C. PHA hydrogels in the dye solutions showed the dark coloration. In the experiments of the adsorption, S-type adsorption in the Giles classification system was found.     

Hyperbranched polyglycerol/poly(acrylic acid) hydrogel for the efficient removal of methyl violet from aqueous solutions

Hydrogels were synthesized from hyperbranched polyglycerol (HPG) and acrylic acid through free‐radical polymerization with HPG as the crosslinker. The HPG/poly(acrylic acid) (PAA) hydrogel could absorb cationic dyes in aqueous solutions because of the existence of a porous structure and the large numbers of hydroxyl and carboxylic groups. With methyl violet chosen as a model compound, the HPG/PAA hydrogel reached a maximum adsorption of 394.12 mg/g at a feed concentration of 1 g/L. The highest removal ratio of 98.33% was observed at a feed concentration of 50 mg/L. The effects of the pH, contact time, and feed concentration on the dye adsorption were investigated. The dye adsorption data fit well with the pseudo‐second‐order and Langmuir models. We believe that the HPG/PAA hydrogels could perform well in appropriate applications in the removal of cationic dyes from aqueous solutions because of their high adsorption capacity and environmental friendliness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42951.     

Efficient adsorption of dyes from aqueous solution by poly(vinyl alcohol‐co‐ethylene) nanofibre membranes modified with β‐cyclodextrin

In this paper, highly absorbent poly(vinyl alcohol‐co‐ethylene) nanofibre membranes modified by β‐cyclodextrin were prepared to adsorb dyestuff from water, and 1,2,3,4‐butanetetra carboxylic acid was used as a crosslinking agent, which greatly enhanced the adsorption capacity of the modified membranes. Field emission scanning electron microscopy and Fourier Transform–infrared spectroscopy were used to characterise the surface morphology and chemical structures of the membranes. Methylene Blue (MB) was used as the main adsorbed dye. The effect of pH value and concentration of the MB solution were also investigated, and equilibrium adsorption reached 139.2 mg/g when the pH value was 10.0. The adsorption process fitted well with the Langmuir adsorption isotherm model and was in accord with the pseudo‐second‐order kinetic model. Moreover, the modified membranes proved to have selective adsorption, especially for some cationic dyes other than MB, and had the potential to be recycled multiple times.     

Removal of methylene blue from aqueous solution by sorption on lignocellulose-g-poly(acrylic acid)/montmorillonite three-dimensional cross-linked polymeric network hydrogels

Batch lignocellulose-g-poly(acrylic acid)/montmorillonite (LNC-g-PAA/MMT) hydrogel nanocomposites were applied as adsorbents. The nanocomposites were characterized by FTIR, XRD, SEM, and TEM. The results showed that montmorillonite (MMT) could react with the monomers and change the structure of polymeric network of the traditional superabsorbent materials, an exfoliated structure was formed in the nanocomposites. The effect of process parameters such as MMT content (wt%), contact time (t), initial concentration of dye solution (C ₀), adsorption temperature (T), and pH value (pH) of the dye solution for the removal of methylene blue (MB) from aqueous solution were also studied. The results showed that the adsorption capacity for MB increased with increasing contact time, initial dye concentration, and pH value, but decreased with increasing MMT content and temperature. The adsorption kinetics were better described by the pseudo-second-order equation, and their adsorption isotherms were better fitted for the langmuir equation. By introducing 20 wt% MMT into LNC-g-PAA polymeric network, the obtaining hydrogel composite showed the high adsorption capacity 1994.38 mg/g and economic advantage for MB. The desorption studies revealed that the composite provided the potential for regeneration and reuse after MB dye adsorption, which implied that the composite could be regarded as a potential adsorbent for cationic dye MB removal in a wastewater treatment process.     

Recovery of heavy metals from aqueous solution by using radiation crosslinked poly(vinyl alcohol)

Crosslinked poly(vinyl alcohol) (PVA) and PVA/acrylic acid hydrogels, prepared by γ‐irradiation, were used in the removal of heavy metals from aqueous solution. Comparative studies of the properties of the two hydrogels were made. The application of the prepared hydrogels as adsorbent materials for Cu²⁺, Co²⁺, and Ni²⁺ from aqueous solution was studied. The chemical and physical properties of the hydrogels, before and after adsorption of the heavy metal ions, were investigated by means of thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. The efficiency of such hydrogels for the recovery of metal ions was determined by atomic absorption and UV spectroscopic analysis. The effect of changing pH on the metal uptake was also studied. It was found that the prepared hydrogels have a substantial ability to adsorb metal ions from their solution. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1649–1656, 2004     

Removal of methylene blue dyes from wastewater using cellulose‐based superadsorbent hydrogels

Superadsorbent cellulose‐graft‐acrylic acid (C‐g‐AA) hydrogels were successfully prepared via free radical polymerization in phosphoric acid solution. Phosphoric acid solution provides a homogeneous reaction system. The C‐g‐AA hydrogels have a porous network inner structure with cellulose as the backbone. The introduced carboxyl groups enable the C‐g‐AA hydrogels with good swelling property (swelling ratio 7327%) and excellent MB adsorption capacity (equilibrium adsorption amount 2197 mg g^?1). The dynamic swelling behaviors of the hydrogels were tested, water intake of hydrogels followed a non‐Fickian type diffusion. The effects of mole ratio of AA to cellulose, the pH of adsorption medium and the initial MB concentration on dye adsorption capacity of hydrogels were investigated. The adsorption isotherm and kinetics fit the Langmuir model and the Pseudo‐second‐order model well, respectively. Desorption was carried out in weak acid solution and 70% MB could be removed, suggesting the C‐g‐AA hydrogels had the potential for reuse. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Acid-treated Bentonite as filler in the development of novel composite PVA hydrogels

In this study, novel eco-friendly hydrogel adsorbents were synthesized based on poly(vinyl alcohol) (PVA) and different contents of an acid-treated bentonite (1–5 wt %). The hydrogels were prepared by freezing–thawing, which is a simple and nontoxic method. The materials were morphologically and thermally characterized by means of swelling assays, X-ray diffraction, scanning electron microscopy, dynamic scanning calorimetry, and thermogravimetric analysis in order to evaluate the effect of acid-treated bentonite loading. The composite hydrogels showed very distinct porous structure and thermal features in comparison to neat PVA as a consequence of the addition of the clay. Moreover, the performance of the obtained composite hydrogels was tested toward the adsorption of cationic (methylene blue) and anionic dyes (methyl red and methyl orange) from aqueous media. The presence of acid bentonite seems to be beneficial for improving the removal capacity of PVA-based hydrogels. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47663.