Different loss of BMD using uncemented press-fit and whole polyethylene cups fixed with cement: repeated DXA studies in 96 hips randomized to 3 types of fixation

Background In cemented THA, aseptic loosening of the cup is more common than loosening of the stem, while periprosthetic osteolysis of the socket resulting in difficult reconstruction problems has emerged as the most significant problem with cementless cup fixation.

Patients and methods 90 patients (96 hips) scheduled for THA were stratified in three groups according to the method of fixation of the acetabular component: acrylic bone cement with fluoride (Cemex-F), porous-coated press-fit cup with ceramic coating (Trilogy, uncemented) and acrylic cement with gentamicin (Palacos). All patients received the Spectron EF stem. Acetabular bone mineral density was measured with dual-energy X-ray absorptiometry (DXA) 1 week postoperatively, and after 12 and 24 months. The periprosthetic BMD was evaluated in 5 ROIs positioned around the acetabular component.

Results In the uncemented sockets, the BMD had decreased proximally and medially to the cup after 2 years. The difference was significant in the proximal region as compared to the control group (Palacos). No difference was noted between the 2 groups with cemented components after 2 years. Stepwise linear regression analysis showed that loss of periprosthetic BMD in the proximal high-pressure region after 2 years increased with higher postoperative BMD and when the uncemented design had been used.

Interpretation Contrary to previous studies of cemented stems, the use of fluoride cement did not influence the periprosthetic BMD 2 years after the examination. Increased loss of BMD with use of uncemented press-fit cups in the region in which osteolytic lesions are commonly found suggests that stress shielding may initiate the development of this complication. Longer follow-up will, however, be necessary to substantiate this hypothesis.     

Bioactive cement or ceramic/porous coating vs. conventional cement to obtain early stability of the acetabular cup. Randomised study of 96 hips followed with radiostereometry.

Ninety patients (96 hips) scheduled for THA were stratified to fixation of the acetabular component in three main groups of about equal size. Fluoride cement, porous coated press-fit cup with ceramic coating or Palacos cum Gentamicin cement were used. All patients received Spectron EF stem. The migration of the cups and the femoral head penetration into the socket were measured with radiostereometric analysis. At 2 years the choice of fixation did not influence the migration or rotation of the cup. Patients with compromised bone quality showed increased three-dimensional (3D or total) migration. Proximal and 3D penetration rates were increased in cemented compared with the uncemented cups (p<0.001), which probably not could be related to the choice of fixation. Appearance of radiolucent lines was almost equal in the two cemented groups. Uncemented cups had less radiolucent lines at 2 years. Fluoride containing cement or uncemented fixation did not improve the early postoperative stability of the socket.     

Periprosthetic Mineralization Around Cementless Total Hip Endoprosthesis: Longitudinal Study and Cross-Sectional Study on Titanium Threaded Acetabular Cup and Cementless Spotorno Stem with DEXA

In a prospective longitudinal study over 2 years and a separate cross-sectional study more than 5 years after operation, we analyzed periprosthetic bone mineral density (BMD) after cementless total hip arthroplasty (THA) (press-fit cementless Spotorno stem, Mecron threaded acetabular cup) by dual-energy X-ray absorptiometry (DEXA). BMD was analyzed in a longitudinal prospective study (n = 53 patients: 29 women, 24 men) and in a separate cross-sectional study (n = 23 patients: 13 women, 10 men) with good clinical outcome (Merle d' Aubigne score > 12). Regions of interest were defined according to Gruen (ROI 1–7) and as netto average ROI (NETAVG I) for the periprosthetic femur, and according to De Lee and Charnley (ROI I-III) and as NETAVG II for the periprosthetic acetabulum. BMD during follow-up was compared with immediate postoperative values of the affected limb. Mean precision error (CV%) was 2.6 ± 0.5% for ROI 1–7 and 1.3 ± 0.9% for ROI I–III. BMD significantly decreased in the periprosthetic femur and acetabulum during the first 3 months after operation. At the femur, BMD (NETAVG I) for women and men, respectively, was 92.4% and 87.5% at 6 months, then 89.4% and 96.2% at 2 years. ROIs around the proximal stem showed the lowest absolute values and decreased most during follow-up (to 79.9% ROI 1 and 68.2% ROI 7, respectively). Mineralization around the cup (NETAVG II), respectively, amounted to 81.1%, 82.6% at 6 months, then 80.1% and 93.8% at 2 years. The medially placed ROI II demineralized most (respectively, 72.1% and 76.7%). More than 5 years after THA, BMD in the femur showed little change, but decreased significantly to 76.4% and 79.1%, respectively, around the cup (NETAVG II). DEXA is a useful method for analyzing changes of mineralization around cup and stem of cementless THA. The results reflect the different stress on the periprosthetic bone after implantation of THA in defined ROIs, supporting earlier reported good clinical results of the Spotorno stem and increased loosening rate of threaded acetabular cups after 5 years. Received: 31 March 1997 / Accepted: 7 August 1997     

The uncemented Bi-Contact total hip arthroplasty

We reviewed a consecutive series of 153 uncemented Bi-Contact (Aesculap, Tuttlingen, Germany) total hip arthroplasties (THAs) in 138 patients who had been followed for at least 5 years (mean, 6.8 years; range, 5-9 years). The Bi-Contact uncemented THA consists of a straight femoral stem made of titanium alloy. The proximal portion of the stem is titanium plasma-sprayed. The cup is press-fit with or without hydroxyapatite coating with a facility for anchoring screws with a snap-fit polyethylene liner. The mean age of the patients was 70.8 years (range, 41-94 years). The mean preoperative Harris hip score of 41 (range, 20-80) improved postoperatively to a mean of 92 (range, 56-96). Three acetabular cups were revised for aseptic loosening, and 1 cup was revised for recurrent dislocation. To date, none of the stems have been revised for aseptic loosening. Radiographic evaluation of the remaining 149 hips revealed that the acetabular cup was stable in 146 hips and possibly unstable in the remaining 3 cases with nonprogressive osteolysis behind the cup. None of the stems showed any evidence of instability. Using the recommendation of revision as the endpoint, the cumulative survival for the prosthesis was 97.3% at a mean follow-up of 6.8 years (95% confidence interval, 95.9-99.4), with stem survival of 100%. In the medium-term, these results are comparable to cemented primary THA and justify the continued use of this prosthesis.     

Total hip arthroplasty for rheumatoid arthritis in younger patients: 2,557 replacements in the Finnish Arthroplasty Register followed for 0–24 years

Background?The results of total hip arthroplasty (THA) in young patients with rheumatoid arthritis (RA) have been reported in only a few studies. On a nationwide level, the outcome of THA in these patients is unknown. We evaluated the population-based survival of THA in patients under 55 years of age with RA and factors affecting the survival.

Patients?Between 1980 and 2003, 2,557 primary THAs performed for RA in patients less than 55 years of age were reported to the Finnish Arthroplasty Register.

Results?Proximally circumferentially porous-coated uncemented stems had a 15-year survival rate of 89% (95% CI 83–94) with aseptic loosening as endpoint. The risk of stem revision due to aseptic loosening was higher with cemented stems than with proximally porouscoated uncemented stems implanted during the same period (RR 2.4; p < 0.001). In contrast, Cox regression analysis showed that the risk of cup revision was significantly higher for all uncemented cup concepts than for all-polyethylene cemented cups with any cup revision as endpoint. There were no significant differences in survival between the THR concepts.

Interpretations?Uncemented proximally circumferentially porous-coated stems and cemented all-poly-ethylene cups are currently the implants of choice for young patients with RA.     

Fluoride-containing acrylic bone cement in total hip arthroplasty. Randomized evaluation of 97 stems using radiostereometry and dual-energy x-ray absorptiometry

Ninety patients (97 hips) scheduled for total hip arthroplasty were stratified to fixation of the femoral component using fluoride-containing cement or Palacos with gentamicin. Whole polyethylene Reflection and press-fit Trilogy cups were used. All patients received Spectron EF stem. The micromotions of the stem were measured with radiostereometric analysis and the periprosthetic bone mineral density with automatic and manual dual-energy x-ray absorptiometry (DEXA) analysis. At 2 years, the choice of cement did not influence the subsidence or rotations of the stem. The DEXA analysis revealed more loss of periprosthetic bone mineral density in fluoride cement group. We speculate that forming of fluorapatite crystals, toxic effects of the fluoride, or lower radiopacity of the fluoride cement might explain this finding. According to our study with 2-year of follow-up, there is no obvious advantage of addition of fluoride to acrylic bone cement when used to fixate the femoral component in total hip arthroplasty.     

Total hip reconstruction in the anatomically distorted hip

Recent reports in the literature strongly support the idea that cement is the optimum form of fixation of the femoral component in total hip replacement. For hybrid total hip arthroplasty, we used a cemented cup instead of an uncemented cup since this was inevitable in cases of poorly developed acetabulum. The uncemented cone femoral component is also beneficial in cases of extremely narrow and cylindrical configuration of the medullary cavity of untreated congenital dislocation of the hips (CDH) and tuberculosis or septic arthritis in childhood. We reviewed the clinical result of a consecutive series of patients with cemented total hip arthroplasty (THA) compared with recent studies on hybrid reconstruction using survivorship analysis. This subsequent study involved a hybrid uncemented Wagner cone femoral component and a cemented acetabular component with roof reinforcement by additional impacted cancellous allograft with hydroxyapatite (HA). We believe that early failure of the cemented components was due to an adverse effect of thin cement mantles around cemented femoral stems as well as the cemented cup in THA. In addition, 8 patients who received our modification of the Charnley CDH component had poor results even though we reduced the stem geometry and thickness. Furthermore, intraoperative fracture and splitting of the proximal femur was a major complication during implantation. Contrary to expectations, the results of these hybrid reconstructions were extremely encouraging (average follow-up period of 2–4.5 years). In addition to our experience of the cemented versus hybrid THA involving the uncemented Wagner femoral component, we have determined positive indications for the untreated and severely distorted anatomy of bilateral CDH for which surgical interventions for reconstruction were not recommended before.     

Experiences with the Plasmacup--early stability, wear, remodelling, and outcome

Whilst advances in cementing technique have led to improvement in the survival of cemented femoral stems in total hip arthroplasty (THA), cup failure due to aseptic loosening remains a major clinical problem. These observations have led to a move away from cemented cup designs, particularly in young patients, towards uncemented implants. The Plasmacup is a hemispherical, press-fit, cementless, titanium-shelled, acetabular component with a polyethylene liner. In this article we review our experience of its pattern of early migration, wear, bone remodelling, and mid-term survival. In 18 cups followed for 2 years in subjects with a mean age at operation of 58 years, the mean total vectorial cup migration was 0.75 mm, and cup orientation remained stable (EBRA method). The mean polyethylene linear wear rate over this period was 0.21 mm/year. In 27 cups followed for 6 months using dual-energy X-ray absorptiometry (DXA), average bone loss was -5%, and the pelvic bone-remodelling pattern was consistent with the rim-loading principle of the cup design. In a clinical review of the outcome of 128 cups in 104 patients with a mean age at operation of 51 years and follow-up of 59 months, we found that 82% of patients had a good or very good Merle D'Aubigne score, and cup survival rate was 98% (Kaplan-Meier). Four cups had small radiographic areas of focal osteolysis and three had been revised (two for recurrent dislocation and one for deep sepsis; none were revised for aseptic loosening). The mean linear wear rate in this series was 0.14 mm/year. In conclusion, the Plasmacup shows satisfactory early stability, a wear rate similar to other uncemented cups, and favourable mid-term clinical function and survival rates.     

10-year results of the uncemented Allofit press-fit cup in young patients

Background and purpose — Uncemented acetabular components in primary total hip arthroplasty (THA) are commonly used today, but few studies have evaluated their survival into the second decade in young and active patients. We report on a minimum 10-year follow-up of an uncemented press-fit acetabular component that is still in clinical use.

Methods — We examined the clinical and radiographic results of our first 121 consecutive cementless THAs using a cementless, grit-blasted, non-porous, titanium alloy press-fit cup (Allofit; Zimmer Inc., Warsaw, IN) without additional screw fixation in 116 patients. Mean age at surgery was 51 (21–60) years. Mean time of follow-up evaluation was 11 (10–12) years.

Results — At final follow-up, 8 patients had died (8 hips), and 1 patient (1 hip) was lost to follow-up. 3 hips in 3 patients had undergone acetabular revision, 2 for deep infection and 1 for aseptic acetabular loosening. There were no impending revisions at the most recent follow-up. We did not detect periacetabular osteolysis or loosening on plain radiographs in those hips that were evaluated radiographically (n = 90; 83% of the hips available at a minimum of 10 years). Kaplan-Meier survival analysis using revision of the acetabular component for any reason (including isolated inlay revisions) as endpoint estimated the 11-year survival rate at 98% (95% CI: 92–99).

Interpretation — Uncemented acetabular fixation using the Allofit press-fit cup without additional screws was excellent into early in the second decade in this young and active patient cohort. The rate of complications related to the liner and to osteolysis was low.     

Total hip arthroplasty in patients less than 40 years old with avascular necrosis of the femoral head. A 5 to 19-year follow-up study

We evaluated 34 total hip arthroplasties (THA) for avascular necrosis of the femoral head in 26 patients who were younger than 40 years at the time of the index operation. The average age at the time of THA was 283 (17-38) years. The mean follow-up was 10.9 (5-19) years. We used 6 cemented and 28 cementless acetabular components and a cemented polished tapered stem in all hips. The mean Charnley modified Merle d' Aubigné Postel score was 8.9 points preoperatively and 16.6 points at final follow-up. Two cemented metal-backed cups were revised because of aseptic loosening at 10 years, one cemented polyethylene cup failed at 12 years and 2 more all polyethylene cups had pending failure. The metal-backed cemented cups and the all polyethylene cups had a longer follow-up than the uncemented cups. Therefore and because of the proven unfavourable long-term outcome of the cemented metal-backed Exeter cup we are not able to draw any firm conclusions regarding the preferred choice between cemented and uncemented cups in this particular group of patients. On the femoral site none of the stems had to be revised. Our results show that a cemented polished tapered femoral component has an excellent survival in primary total hip replacement in young patients with avascular necrosis of the femoral head.     

人工全髋关节翻修术中骨缺损的处理

目的研究全髋关节翻修术中骨缺损的处理方法。方法1990年12月至1999年6月对16例一期行金属-聚乙烯假体全髋关节置换术失败患者行全髋关节翻修术。处理髋臼骨缺损的方式包括：（1）髂骨填充骨缺损（3例）,（2）骨水泥填充骨缺损（5例）,（3）异体颗粒骨打压植骨结合金属网重建髋臼（8例）,后两种方式均属骨水泥型。16例行全髋关节翻修术患者全部行髋臼翻修,其中10例同时行股骨柄翻修。所有患者均进行临床和影像学随访。结果所有患者均获得随访,随访时间4．1～7．7年,平均5．9年。Harris评分由全髋关节翻修术前的范围,62-75分,平均68分,升至术后的90—94分,平均91分。随访中均未出现假体旁透亮线、假臼杯水平或垂直移位和骨溶解等征象。共有4例出现并发症,包括异位骨化2例,脱位2例,无一例发生感染。结论有效修复髋臼骨缺损,进行髋部骨性结构的重建,是全髋关节翻修术成败的关键。     

Computer-assisted navigated cup placement of different cup types in hip arthroplasty--a randomised controlled trial]

AIM:The position of the acetabular implant has a great influence on the outcome of total hip arthroplasty. The acetabular implants differ in their characteristics during insertion. In order to control the influence of the implant in different axes, 80 implantations of acetabular component were performed under computer-assisted control by a surogate navigation system. METHOD: Within a prospective randomised study, 70 total hip replacements were performed by one surgeon using two different uncemented implants (PPF screw cup/Hedrocel pressfit cup). The position of the cup was measured at different times during surgery and was compared to 10 cemented PE cup placements. RESULTS: During the milling procedure the anteversion of the two uncemented cups differed significantly (p = 0.026). The standard deviation of anteversion during implantation different significantly relating to the cup type: press-fit cup 3.86 degrees, screw cup 2.1 degrees and cemented PE cups 0,84 degrees. The inclination was less susceptible. CONCLUSION: The cup design of uncemented acetabular implants influences the outcome of surgery. In our trial a spherical press-fit cup showed a greater variability than the screw-cup. The CAS system can be used as a tool to minimise these effects.     

Bone mineral density and biochemical markers of bone turnover in aseptic loosening after total hip arthroplasty.

The aims of this study were to determine whether subjects with aseptic loosening after total hip arthroplasty (THA) have regional differences in periprosthetic bone mineral density (BMD) and systemic biochemical markers of bone turnover compared to subjects with successful implants.Proximal femoral and pelvic BMD were measured by dual energy X-ray absorptiometry and bone turnover markers were assayed in 49 subjects 12.6+/-4.3 (mean+/-SD) years after cemented THA. Femoral BMD was lower in Gruen zones 2, 5, 6, and 7 in subjects with a loose femoral implant (n=17) compared to those (n=32) with fixed femoral implants (P<0.05 all comparisons). This BMD difference was greatest (-31%, P=0.02) in the proximal and medial region of the femur. Subjects with femoral loosening had higher levels of the bone resorption marker N-telopeptides of type-I collagen (P=0.02) than those with a fixed femoral implant. No differences in pelvic BMD or bone turnover markers were found between subjects with loose (n=18) versus fixed (n=31) pelvic implants.This study suggests that failure of femoral components after cemented THA is associated with region-specific decreases in BMD and an increase in urinary excretion of N-telopeptide cross-links of type-I collagen. These surrogate outcome markers may be of value in monitoring response to antiresorptive therapies used to treat periprosthetic osteolysis, although the diagnosis of aseptic loosening remains clinical and radiological.     

Ten-year results with the Morscher press-fit cup: an uncemented, non-modular, porous-coated cup inserted without screws

Total hip arthroplasty (THA) with well designed cementless acetabular implants has shown excellent results. The purpose of this study was to assess our clinical and radiological outcomes using an uncemented cup. We conducted a prospective cohort study including all consecutive primary THAs performed with the Morscher press-fit cup, an uncemented non-modular acetabular component, between March 1996 and December 1998. Patients were evaluated at ten years with clinical and radiological follow-up, patient satisfaction and questionnaire assessment using the Harris hip score (HHS), Merle d’Aubigné and Postel score, the UCLA score, the 12-item short-form health survey (SF-12) and a visual analog scale. Five hundred sixty-one THAs were performed in 518 patients. At 120 months (± 7.3 months), 303 patients with 335 THAs were still available for follow-up. None of the patients had required cup revision for aseptic loosening. At ten years, the cup survivorship was 98.8% (95% CI 97.4–99.5) with cup revision for any cause as an endpoint. No radiolucencies were seen around the cups, but osteolytic defects involved 21 stems (8.3%). Mean total linear polyethylene wear was 0.9 mm. The Morscher acetabular replacement cup provides excellent results at ten years. There were no revisions for aseptic loosening of the cup, and no osteolytic defects were found around the cup. Patient satisfaction was high and the clinical results were very good.     

Excellent Long-Term Survival Rate of Polished,Tapered, Cemented Stems in Patients Aged 35 Years or Younger With Avascular Necrosis or Inflammatory Arthritis of the Hip

BackgroundTotal hip arthroplasty (THA) for avascular necrosis (AVN) or inflammatory arthritis (IA) comes with a relatively high risk of aseptic stem loosening, especially in young patients. There are limited long-term data on the survivorship of polished, tapered, cemented stems in this population. We therefore performed a single-center retrospective study investigating the survival of this particular stem type in young patients with AVN or IA.MethodsAll patients aged ≤35 years who had received a THA for AVN or IA operated on by the senior author between 1990 and 2010 at the University Hospitals Leuven were identified. In total, 85 THAs in 62 patients were included. Primary endpoint was revision of the femoral component for aseptic loosening. Secondary endpoints were revision of the acetabular component for aseptic loosening, revision for other reasons, and the presence of radiolucencies around the components.ResultsThe mean follow-up for the entire cohort was 18.0 ± 5.3 years (range 8.0-28.9). Taking revision for aseptic loosening as endpoint, the survival of cemented stems was 100% after 15 years and 95.1% after 20 years. Survival of uncemented cups (91.3%) was significantly better than survival of cemented cups (50.3%) after 20 years of follow-up for aseptic loosening. Taking revision for any reason as endpoint, the survival of THAs with uncemented and cemented cups was 90% and 43.1% at 20 years respectively. Radiolucencies developed in the cement mantles around 11 of the 81 nonrevised stems, mainly in zones 1 and 7.ConclusionIn this cohort of young patients with high-risk profiles for aseptic stem loosening, polished, tapered, cemented stems showed excellent long-term survival rates and they therefore remain a viable alternative to uncemented stem designs.     

Cancellous and cortical bone mineral density around an elastic press-fit socket in total hip arthroplasty

Background and purpose — The acetabular component has remained the weakest link in hip arthroplasty for achievement of long-term survival. One of the possible explanatory factors for acetabular failure has been acetabular stress shielding. For this, we investigated the effects of a cementless elastic socket on acetabular bone mineral density (BMD).

Patients and methods — During 2008–2009, we performed a single-center prospective cohort trial on 25 patients (mean age 64 (SD 4), 18 females) in whom we implanted a cementless elastic press-fit socket. Using quantitative BMD measurements on CT, we determined the change in BMD surrounding the acetabular component over a 2-year follow-up period.

Results — We found a statistically significant decrease in cancellous BMD (?14% to ?35%) and a stable level of cortical BMD (5% to ?5%) surrounding the elastic press-fit cup during the follow-up period. The main decrease was seen during the first 6 months after implantation. During the second year, cancellous BMD showed a further decrease in the medial and lower acetabular regions.

Interpretation — We found no evidence that an elastic press-fit socket would prevent acetabular stress shielding during a 2-year follow-up.     

Total hip arthroplasty for rheumatoid arthritis in younger patients: 2,557 replacements in the Finnish Arthroplasty Register followed for 0-24 years

BACKGROUND: The results of total hip arthroplasty (THA) in young patients with rheumatoid arthritis (RA) have been reported in only a few studies. On a nationwide level, the outcome of THA in these patients is unknown. We evaluated the population-based survival of THA in patients under 55 years of age with RA and factors affecting the survival. PATIENTS: Between 1980 and 2003, 2,557 primary THAs performed for RA in patients less than 55 years of age were reported to the Finnish Arthroplasty Register. RESULTS: Proximally circumferentially porous-coated uncemented stems had a 15-year survival rate of 89% (95% CI 83-94) with aseptic loosening as endpoint. The risk of stem revision due to aseptic loosening was higher with cemented stems than with proximally porouscoated uncemented stems implanted during the same period (RR 2.4; p < 0.001). In contrast, Cox regression analysis showed that the risk of cup revision was significantly higher for all uncemented cup concepts than for all-polyethylene cemented cups with any cup revision as endpoint. There were no significant differences in survival between the THR concepts. INTERPRETATIONS: Uncemented proximally circumferentially porous-coated stems and cemented all-poly-ethylene cups are currently the implants of choice for young patients with RA.     

Uncemented metal-on-metal acetabular component: follow-up of 112 hips for a minimum of 5 years

Background Aseptic loosening is the major cause of implant failure. In cemented hip arthroplasty, failure of the acetabular side is mainly due to lysis caused by wear particles. By using an implant with low wear characteristics and by enhancing acetabular fixation using an uncemented implant, we aimed to reduce acetabular lysis and thereby loosening.

Patients and methods This was a retrospective cohort study of 119 hips (101 patients) that had the Uncemented Fitmore cup (Sulzer Orthopedics). In 66 patients, the femoral component was CF-30 (Sulzer) used with cement. In the remaining 35 patients, thrust plate prosthesis (TPP) (Sulzer) was used. Of the 101 patients, 94 (112 hips) were available for study. Mean follow-up of the 94 patients was 7 (5-13) years.

Results The mean preoperative Harris hip score was 38 and the mean postoperative Harris hip score was 89 at the last follow-up. Taking aseptic loosening as the endpoint, the survival rate of the Fitmore cup was 100% at 11 years.

Interpretation The uncemented Fitmore acetabular cup with second generation metal-on-metal articulation showed good results with regard to aseptic loosening in the medium term.     

Migration of porous press-fit cups in hip revision arthroplasty: A Radiostereometric 2-Year Follow-up Study of 60 Hips

The migration of 60 press-fit cups fixed with screws was evaluated by radiostereometric analysis for 2 years in 57 patients revised because of aseptic loosening. The mean proximal migration of the cup center increased continuously up to 0.36 mm (range, 0.0–1.6 mm), whereas the migration in the other directions reached a level at 0.3 to 0.4 mm after 6 months. Mean rotations of less than 1° were recorded. Factors influencing motions were cup size, use of bone—grafts, and position of the cup center in the vertical and horizontal directions. Compared with previous stereoradiographic studies of cemented revisions, the migration of the press-fit cup was smaller, however, still higher than previously reported for uncemented cups of the same design used in primary surgery.