The fabrication of graphitic thin films with highly dispersed noble metal nanoparticles by direct carbonization of block copolymer inverse micelle templates

Ordered arrays of Au or Ag nanoparticles supported on two-dimensional graphitic carbon films were prepared by direct carbonization of stabilized asymmetric polystyrene-block-poly(4-vinyl pyridine) (PS-b-P4VP) inverse micellar films loaded with metal precursors. Crosslinked PS-b-P4VP thin film templates with metal precursors selectively distributed in P4VP domains were converted to carbonaceous thin films having well-defined, highly dispersed metal nanoparticle (NP) arrays by ultraviolet (UV) irradiation under vacuum and subsequent carbonization. Mesoporous carbon films were also obtained after extracting the metal NPs by sonication in selected solvents. PS-b-P4VP was employed not only as carbon source, but also as template for introducing metal NPs in a nanopatterned configuration. The characteristic features and properties of thus generated hybrid carbon nanostructures were investigated by microscopy, UV–visible spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction measurement, and Raman spectroscopy.     

Control over the surface plasmon band of block copolymer/Ag/Au nanoparticles composites by the addition of single walled carbon nanotubes

In this study, we demonstrate control over the localized surface plasmon band (SPB) of a micellar poly(styrene-block-4vinylpyridine) (PS-b-P4VP) copolymer thin film composite that includes Ag and Au nanoparticles (NPs) in the presence of single walled carbon nanotubes (SWCNTs). Ag and Au NPs are preferentially located in the P4VP core and the PS corona of ordered spherical PS-b-P4VP copolymer micelles, respectively. This structure gave rise to a single SPB due to the coupling of Ag and Au SPBs. The non-covalent addition of SWCNTs in the block copolymer micelles shifts the coupled SPB to a lower wavelength. The maximum shift in the coupled SPB of approximately 30 nm was achieved in the PS-b-P4VP/Ag/Au NPs composite. The carbon nanotube induced modulation of the coupled SPB stems from the charge accumulation effect of the SWCNTs placed between the two types of nanoparticles.     

Shell-core-corona aggregates formed from poly(styrene)-poly(4-vinylpyridine) block copolymer induced by added homopolymer via interpolymer hydrogen-bonding

The solution behavior of poly(styrene)-poly(4-vinylpyridine) (PS-b-P4VP) block copolymer with added poly(4,4′-oxydiphenylenepyromellitamic acid) (POAA) homopolymer in DMF is studied by dynamic light scattering (DLS), nuclear magnetic resonance (NMR), and transmission electron microscopy (TEM). It is found that coaggregation takes place when mixing PS-b-P4VP block copolymer and POAA homopolymer in DMF due to the strong interpolymer hydrogen-bonding between POAA chains and P4VP blocks. The coaggregation is a diffusion-controlled process and the complexation-induced aggregates are very stable. NMR measurements demonstrate that the resultant aggregates are much more swollen compared with typical amphiphilic block copolymer core-shell micelles. DLS measurements with Eu³⁺ as a probe combined with TEM observation, are employed to study the structure of the aggregates. Results reveal that the formed aggregates are core-shell spheres with the P4VP/POAA complexes as core and the PS blocks as shell when the weight ratio of POAA to PS-b-P4VP is lower. However, a core-shell-corona structure forms with a thin layer of POAA chains adsorbed on the initial core-shell aggregates with increasing weight content of POAA to 60%. Finally, possible mechanisms of the structural transitions are proposed.     

Dynamic study of polystyrene-block-poly(4-vinylpyridine) copolymer in bulk and confined in cylindrical nanopores

AAO template is highly recommended to nanostructure polymers and to study polymer properties under confinement. The dynamic properties of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) under confinement using broadband dielectric spectroscopy are investigated in this work and the results compared to those of the bulk. Anodized aluminum oxide (AAO) membranes, having pore diameters from tens to hundreds of nanometers in size, were used to confine PS-b-P4VP. Moreover, the influence of gold nanoparticles (AuNPs) in the copolymer matrix was also studied. The morphology and structure of the bulk copolymer and the copolymer confined in the AAO templates were characterized by transmission electron microscopy, scanning electron microscopy and Small Angle X-Ray Scattering. For PS-b-P4VP in bulk, dielectric relaxation techniques allowed studying selectively the P4VP segmental dynamics within the diblock. At high temperature this copolymer presents a dominant peak (MWS relaxation), most likely originated by the relatively high conductivity combined with the presence of interfaces emerging in the nanostructured samples. Moreover, a pronounced β-relaxation is observed for the copolymer compared with that of pure P4VP. This is likely due to a non-negligible contribution from the α-relaxation of the PS component. The γ-relaxation is markedly different in the copolymer, which is evidenced by a distinct temperature dependence of the resulting relaxation times. When the copolymer is embedded in alumina nanopores with small pore diameters (25 and 35 nm) there are significant changes, where the tendency is going to a faster dynamics when the pore diameter decreases more likely related to the relevance of surface effects. The presence of the AuNPs in the system enhances this effect. These results are in agreement with segregated structures found in the block copolymer by TEM and SAXS.     

Study of the time evolution of the surface morphology of thin asymmetric diblock copolymer films under solvent vapor

The time development of the surface morphology of asymmetric polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) thin films ‘annealing’ in methanol vapor, a selective solvent for minority P4VP block, was investigated by atomic force microscopy(AFM). For PS-b-P4VP with cylindrical structure in bulk, as annealing time progressed, the surface morphology underwent structural transitions from featureless topography to hybrid morphology of cylindrical and spherical pits, to cylinders, to nanoscale depressions, back to cylinders again. The different film thickness made the number of the transitions observed, at any given annealing time, different. The thicker the film is the more transitions at a given annealing time can be observed. If the film was not thick enough, depressions appeared. For PS-b-P4VP with spherical structure in bulk, it displayed nanoscale depressions with the annealing time increasing. A possible mechanism of the transition of morphologies during solvent annealing was proposed.     

Deposition of silver nanoparticles on single wall carbon nanotubes via a self assembled block copolymer micelles

We demonstrate a facile route to decorate the surface of networked single walled carbon nanotubes (SWNTs) with silver nanoparticles (Ag NPs). The method is based on utilization of either spherical poly(styrene-b-4vinylpyridine) (PS-b-P4VP) or cylindrical poly(styrene-b-acrylic acid) (PS-b-PAA) copolymer micelles capable of stabilizing nanotubes in solution and subsequently forming a thin and uniform block copolymer/SWNTs composite film upon spin coating. The selective doping of silver acetate into either P4VP or PAA domains in a thin composite film, followed by thermal treatment, results in the formation of Ag NPs in the cores of micelles. Further heat treatment at 500 °C sufficiently high for degrading both block copolymers allows us to fabricate a thin SWNTs network in which Ag NPs are efficiently deposited on the surface of nanotubes. A sharp surface plasmon absorption band around 400 nm of the networked SWNTs with Ag NPs confirms the presence of Ag NPs with narrow distribution in their size.     

Fabrication of fibril like aggregates by self-assembly of block copolymer mixtures via interpolymer hydrogen bonding

This paper describes the formation of fibril like aggregates from the self-assembly of block copolymer mixture (polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) and polystyrene-b-poly(acrylic acid) (PS-b-PAA)) via interpolymer hydrogen bonding in nonselective solvent. The hydrogen bonding between P4VP and PAA in chloroform leads to the formation of complex. When all the pyridine units in P4VP were all hydrogen bonded to acrylic acid in PAA, the formed complex is insoluble, resulting in the formation of spherical micellar aggregates and nanorods. However, two kinds of supramolecules with insoluble or soluble complex are formed in the solution when PS-b-P4VP and PS-b-PAA are mixed with equal mole ratio. The fibril like aggregates can be formed from the self-assembly of supramolecule with soluble complex during spin-coating process. The effects of evaporation rate of solvent and solution concentrations on the formation of fibril like aggregates were investigated. The results prove that the kinetic factors play an important role in the formation of the fibril like aggregates.     

Low dielectric constant nanoporous poly(methyl silsesquioxane) using poly(styrene-block-2-vinylpyridine) as a template

Low dielectric constant nanoporous poly(methyl silsesquioxane) (PMSSQ) was prepared through the templating of an amphiphilic block copolymer, poly(styrene-b-2-vinylpyridine) (PS-b-P2VP). The experimental and theoretical studies suggest that the intermolecular hydrogen bonding interaction is existed between the PMSSQ precursor and PS-b-P2VP. The result of modulated differential scanning calorimeter (MDSC) indicates the miscible hybrid of the PMSSQ precursor/PS-b-P2VP. The miscible hybrid and the narrow thermal decomposition of the PS-b-P2VP lead to nanopores in the prepared films from the results of transmission electronic microscopy (TEM), atomic force microscopy (AFM), and small angle X-ray scattering (SAXS). The effects of the loading ratio and the PS block volume ratio (f_PS: 0.74, 0.46 and 0.35) on the morphology and properties of the prepared nanoporous PMSSQ films were investigated. The AFM and TEM studies suggest that the uniform pore morphology should be prepared from a modest porogen loading level for the optimum intermolecular hydrogen bonding. The PS-b-P2VP with a smaller f_PS requires a higher loading level to obtain the uniform pores. The refractive index and dielectric constant of the prepared nanoporous films could be tuned by the loading ratio in the range of 1.361-1.139 and 2.359-1.509, respectively. However, both properties are independent of the f_PS. The prepared study demonstrates the control of the morphology and properties of the nanoporous films through the polymer structure.     

Nanostructured polystyrene-block-poly(4-vinyl pyridine)(pentadecylphenol) thin films as templates for polypyrrole synthesis

Polypyrrole has been chemically synthesized on thin film nanostructures obtained from comb-shaped supramolecules of polystyrene-block-poly(4-vinyl pyridine) (PS-b-P4VP) hydrogen bonded with pentadecylphenol (PDP). PDP was washed from thin films of cylindrical and lamellar self-assembled comb-copolymer systems, which resulted in removal of the upper layers of microdomains, leaving single cylindrical and lamellar layers covering a substrate, with P4VP segregated at the bottom as well as at the free air interface. This P4VP was complexed with Cu²⁺ ions, after which chemical oxidation polymerization of pyrrole resulted in a thin polypyrrole layer covering the nanostructured block copolymer. The use of a catalytic amount of bipyrrole greatly improved the quality of the obtained product. The conductivity was measured to be ∼0.7 S cm⁻¹.     

Transition behavior and ionic conductivity of lithium perchlorate-doped polystyrene-b-poly(2-vinylpyridine)

We report the transition behavior and the ionic conductivity of ion-doped amorphous block copolymer, based on two compositionally different polystyrene-block-poly(2-vinylpyridine) copolymers (PS-b-P2VPs) that can self-assemble into nanostructures, where P2VP block is ionophilic to lithium perchlorate (LiClO₄). The transition temperatures of LiClO₄-doped PS-b-P2VP, like the order-to-disorder transition (T_ODT), were measured by small-angle X-ray scattering (SAXS) and depolarized light scattering (DPLS). The selective ionic coordination to the nitrogen units of P2VP block leads to the increase of the repulsive interactions between two block components from weak- to strong-segregation regime with increasing amount of LiClO₄, which results subsequently in the increased T_ODT. However, for a compositionally asymmetric PS-b-P2VP under lamellar morphology, the ionic conductivity by the addition of LiClO₄ was remarkably increased at higher temperatures, representing that the effective ionic coordination at the greater volume fraction of P2VP block component improves the ionic conductivity as the temperature approaches to a rubbery phase.     

Block copolymers containing pyridine moieties: Precise synthesis and applications

This review highlights the precise synthesis and application of various well-defined rod–coil and coil–coil block copolymers composed of poly(2-(or 4-)vinylpyridine) (P2VP or P4VP) block(s) with pyridine moieties. These polymers were synthesized by means of living anionic polymerization. Poly(hexyl isocyanate) (PHIC) was used as the rod-like segment, because hexyl isocyanate undergoes living anionic polymerization under carefully selected conditions. This review describes the syntheses of the block copolymers, polystyrene-b-P2VP, polystyrene-b-P4VP, polyisoprene-b-P2VP, P2VP-b-poly(methyl methacrylate), P2VP-b-poly(ethylene oxide), P2VP-b-poly(2-(N-carbazolyl)ethyl methacrylate), P2VP-b-PHIC, P2VP-b-PHIC-b-P2VP, and PHIC-b-P2VP-b-PHIC. The formation of self-organized nanostructured materials and molecular assemblies by such block copolymers and their possible applications are also described. These assemblies include monolayers, microphase-separated periodic-ordered nanostructures, micelles, polymer–metal complexes, nanoparticles, inorganic and metal layers, and nanoporous films with nanoparticles.     

Structure and phase transition in thin films of block copolymer micelles complexed with inorganic precursors

Block copolymer micelle can be used as nano-reactor where separated domains serve as a compartment for the production of nanomaterials, ultimately creating nanocomposite materials. In this work, thin nanocomposite films generated from polystyrene-b-poly(acrylic acid) (PS-b-PAA) micellar solution in which small amount of inorganic precursor was added were investigated. The films were prepared by spin coating onto silicon substrate, and then solvent-annealed. As-spun films exhibit typical micellar structure with spherical shape along which inorganic nanoparticles are dispersed. Such morphology remains unchanged after solvent annealing for micellar films with small amount of inorganic precursor. However, further increase in the amount of inorganic precursors brings about the morphological changes, producing different organization of inorganic nanoparticles in composite films. This behavior was found to strongly depend on the types of precursors and solvents used for annealing. These results illustrate a simple yet useful route to generate the polymeric nanocomposites with diverse structure and composition.     

Selective distribution of interacting magnetic nanoparticles into block copolymer domains based on the facile inversion of micelles

We demonstrate a simple methodology to incorporate interacting magnetic nanoparticles (mNPs) into cylinder forming block copolymer templates. Poly(styrene-block-isoprene) (PS-b-PI) with PI cylinders and poly(styrene-block-4vinylpyridine) (PS-b-P4VP) with PS cylinders were used as the block copolymer templates and γ-Fe₂O₃ NPs coated with oleic acids were pre-synthesized for the interacting mNPs. Regardless of the template block copolymers, the selective location of mNPs and the size of mNP aggregates are clearly altered by changing casting solvents. When good solvents for both blocks were used as casting solvents, mNPs are readily aggregated during the solvent evaporation. In contrast, under selective casting solvents for the minor blocks, the mNPs were selectively trapped into the cylinder domains through the facile inversion of micelles during solvent evaporation. The interplay between mNPs and block copolymers was also tested with different molecular weights of block copolymers.     

Water-induced morphology evolution of block copolymer micellar thin films

Morphology evolution of diblock copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) micellar thin film in the presence of water was investigated. Surface holes with nanoscale cavities in hexagonal order could be induced by water treatment for certain periods. The nanoscale surface cavities could be transformed into isolated nanospheres in a dry environment or back to protruding densely packed spheres by toluene (a selective solvent for PS coronae) treatment. The morphology evolution of micellar thin film strongly depended on the slow evaporation of toluene solvent, the swelling of P4VP cores in the humid environment, and the subsequent movement of PS chains induced by air and toluene. The incompatibility between solvent and block, and that between the unlike blocks also played an important role in the morphology evolution.     

Self-assembly of an A-B diblock copolymer blended with a C homopolymer and a C-D diblock copolymer through hydrogen bonding interaction

In this study, we investigated the miscibility, phase behavior, and self-assembled nanostructures formed from the immiscible crystalline-amorphous diblock copolymer poly(?-caprolactone-b-4-vinyl pyridine) (PCL-b-P4VP, A-B) when blended with the homopolymer poly(vinyl phenol) (PVPh, C) and the diblock copolymer poly(vinyl phenol-b-styrene) (PVPh-b-PS, C-D). Long-range-ordered microphase separation was difficult to achieve in the PCL-b-P4VP/PVPh (A-B/C) blend system because PVPh interacted with both the P4VP and PCL blocks simultaneously through hydrogen bonding interactions. In contrast, we observed sharp, multiple orders of diffraction in the SAXS profiles of the PCL-b-P4VP/PVPh-b-PS (A-B/C-D) blend system, indicating that perfect microphase separation occurred because the incorporation of the PS block induced the PVPh block to hydrogen bond preferentially with the P4VP block. This simple A-B/C-D (PCL-b-P4VP/PVPh-b-PS) diblock copolymer mixture exhibited self-assembly behavior (a three-lamella phase) similar to that of a corresponding ABC triblock copolymer.     

A facile preparative method for gold-containing vesicles from poly(styrene-block-2-vinylpyridine) block copolymer/HAuCl4 complexes

It is found that the complexes of PS-b-P2VP and HAuCl₄ in THF can form a compound vesicle when the THF solution is treated at 40 °C. The compound vesicle is composed of an insoluble wall formed by P2VP/HAuCl₄ complexes and a soluble PS shell. The vesicular character of the aggregates was investigated by dynamic light scattering (DLS) and transmission electron microscope (TEM). The decrease of the solubility of P2VP blocks in THF drives the PS-b-P2VP/HAuCl₄ complexes to aggregate into vesicles, which are stable upon dilution or crosslinking. Based on this study, the vesicles decorated with gold nanoparticles can be produced, which hold potential for the facile organization of the vesicle-supported precious metal catalysts.     

Effects of substrate roughness on the orientation of cylindrical domains in thin films of a polystyrene-poly(methylmethacrylate) diblock copolymer studied using atomic force microscopy and cyclic voltammetry

This paper describes the orientation of cylindrical domains in thin films of a polystyrene-poly(methylmethacrylate) diblock copolymer (PS-b-PMMA; 0.3 as the PMMA volume fraction) on gold and oxide-coated Si substrates having different surface roughness. Atomic force microscopy images of PS-b-PMMA films having thickness similar to the domain periodicity permitted us to study the effects of substrate roughness and block affinity on domain orientation. PS-b-PMMA films on gold substrates showed metastable vertical domain orientation that was attained more slowly on rougher substrates. In contrast, the domains were horizontally oriented on oxide-coated Si regardless of surface roughness and the annealing conditions examined. In addition, cyclic voltammetry data for PS-b-PMMA films on gold substrates whose PMMA domains were etched suggested that the metastable vertically oriented domains reached the underlying substrates. These results indicate that PS-b-PMMA films containing vertically oriented cylindrical domains can be obtained by using rough gold substrates upon annealing under controlled conditions.     

Effects of additives on the morphologies of thin titania films from self-assembly of a block copolymer

The effects of additives of poly(methyl methacrylate) (PMMA) and HAuCl₄ on the morphologies of hybrid titania films formed via co-assembly of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) copolymers, titania sol-gel precursor in a selective solvent were investigated. The results show that addition of PMMA or HAuCl₄ has an important influence on the morphologies of hybrid titania films. Addition of PMMA or HAuCl₄ can induce the morphology transition of the PS-b-PEO/titania sol-gel mixture from spherical micelles to vesicles. Therefore, the morphologies of the hybrid films formed on silicon substrate surfaces by spin-coating can be controlled by the addition of homopolymer (PMMA) or inorganic precursor (HAuCl₄) into the PS-b-PEO/titania sol-gel mixtures, allowing access to nanoparticles or nanoporous films. After removing the polymer matrix, nanoparticle aggregates or nanobowl-like structures are left behind on the substrate surfaces.     

Surface morphology evolution of poly(styrene-block-4-vinylpyridine) (PS-b-P4VP)(H) and poly(methyl methacrylate)-dibenzo-18-crown-6-poly(methyl methacrylate) (PMCMA) supramolecular film

Well-ordered nanostructured polymeric supramolecular thin films were fabricated from the supramolecular assembly of poly(styrene-block-4-vinylpyridine) (PS-b-P4VP)(H⁺) and poly(methyl methacrylate)-dibenzo-18-crown-6-poly(methyl methacrylate) (PMCMA). A depression of cylindrical nanodomains was formed by the block of P4VP(H⁺) and PMCMA associates surrounded by PS. The repulsive force aroused from the incompatibility between the block of P4VP(H⁺) and PMCMA was varied through changing the molecule weight (M_w) of PMCMA, the volume fraction of the block of P4VP(H⁺), and annealing the film at high temperature. Increasing the repulsive force led to a change of overall morphology from ordered nanoporous to featureless structures. The effects of solvent nature and evaporation rate on the film morphology were also investigated. Further evolution of surface morphologies from nanoporous to featureless to nanoporous structures was observed upon exposure to carbon bisulfide vapors for different treatment periods. The wettability of the film surface was changed from hydrophilicity to hydrophobicity due to the changes of the film surface microscopic composition.     

Block copolymer photonic mesogels exhibiting dual volume phase transitions

Photonic mesogel films exhibiting brilliant photonic colors were prepared by selective swelling of polystyrene-b-quaternized poly(2-vinyl pyridine) (PS-b-QP2VP) block copolymers, and their volume phase transition behaviors were investigated in various solvent mixtures. The swollen PS-b-QP2VP lamellae segregate into mesophased gels where the highly swollen QP2VP gel layers are alternating with the glassy PS layers and exhibit strong responsive photonic colors in visible regime. Utilizing the changes of photonic stop bands, the swelling behaviors of the photonic mesogels were able to be monitored with sub-nanometer accuracy. Unusual dual volume phase transitions were observed at certain conditions where hydrogen bonding became significantly strong.